I have used lockwiz to unlock the CID and SIM, BUT I get an Internal Error code. I am trying to put the WWE rom onto the xda but it comes up that the device is not the right one for the rom. I have searched the forums and come up with some deadends.
Any help?
Related
I bought this phone and had image version :1.6.2.105 on T-Mob
Then I unlock it using Lokiwiz02b but I did not touch the CID (because I don't know what was that for) as I've swap the SIM and it worked so I thought "job done". Bad move?
Then I upgraded the firmware with MR Clean AKU 2.3
The problem now is that I can't sync my handset with my PC and is not my pc because I test it whit my friend XDA MINI S and it works fine. I tried to flash it with "(Xda_Minis_Upgrade_v2.21.4.101)" but it won't take it... is any safe firmware that I can reflash in order to revert it to an unbranded phone? Also my battery now last far more less since!
All I want is not to see any T-mobile sign or else.
Please note that I'm familiar on flashing LG 3G and motorola 3G phones. But I'm a still a newby here and excuse my english too.
Bump!!
Bump!!
you can't change firmware without CID unlock.
There are loads of posts with ROM change info, try doing a search
Solved!!!!!
I tell you what I did...
I downloaded this firmware CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
So I downgrade my WM to firmware version: 1.6.*.* then I did again the unlocking (to make in sure) then I download the latest O2 firmware (Xda_Minis_Upgrade_v2.21.4.101) for mini s and reflashed it... Now my phone is rebranded O2 but I don't mind... The battery seams to last longer now.... We will see... Thank you for answering... ;-)
i m having qtek 9100 (g3)i dont know which language it is? by mistake i upgraded to custom rom without unlocking cid.. i stucked in 98% n bootloader screen appears... i want to change in english language. itried several roms.. but the same problem. plz guide me out of this. i wanna my cell started...
in the netherlands the qtek's are sold without a simlock
however, there is a possibility that there is a cid-lock.
to remove this, read the wiki.
but first flash it with an original qtek rom
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
then cid unlock it and flash it with the rom you want
rom probs
hi, sorry im new to the site but i noticed you have the same rom as me (1.37.401.3 WWE) i cant seem to unlock the CID, on command it comes up with "could not update itsutils.dll to the current version, maybe its in use" any help would be much appreciated.
p.s i have already flashed it to get that rom so im not sure if i need to find a new one or it can be resolved...
Hi,
- I'm stuck into the first splashscreen
- I can get into bootloader mode
- When trying to run USPL it hangs at 50... with 2 errors
The only solution I know is the factory rom (DUTCH ORIGINAL HTC ROM - not branded) but it wasn't delivered with the device on cd
Does anyone know if it's possible to flash a backed up rom from my mini-sd card from the bootloader? or get into dos from bootloader to type a command to run the exe file maybe?
ORIGINAL DUTCH HTC ROM (NON BRANDED) WM2003, WM5 or WM6
----------------------------------------------------------------
If anyone has or can find a non branded original dutch HTC rom, would be great to help me (and lots of other people). Sending in your device is 6 weeks waiting, did it last time. So the repair service has the original rom, I wonder why this isn't available online, there are so many roms downloadable online from different operators, but no original dutch HTC rom ?!?
I think I can flash back with succes, even if it was an older original HTC rom (WM2003 or SE or WM5 or WM6).
Anyone can help all the people that are stuck with the dutch original rom? or other people that are stuck and want to flash from their backups from bootloader?
Hope to receive some serious answers from experienced 'senior' xda users
Thanks for your help!
Innovator
Innovator said:
Hi,
ORIGINAL DUTCH HTC ROM (NON BRANDED) WM2003, WM5 or WM6
----------------------------------------------------------------
If anyone has or can find a non branded original dutch HTC rom, would be great to help me
Click to expand...
Click to collapse
In the wiki you can find a Dutch HTC__001 1.23.404.2 1.07.0000
http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades
Did you try it ?
Ciao
Nld Rom For Htc P3300 Artemis
Hi,
Thanks for trying to help, but the rom you mention is for HTC Trinity, i need a dutch official rom (WM5) for HTC Artemis (P3300);
I did try it, what can i lose with a bricked phone, and setup quits at 1% mentionning 'image file corrupt'. I guess because it's for another HTC.
I did get to 3% with other rom images, but setup was broken off then, due to that i cannot run uspl with a bricked phone.
Anyone else finds a dutch wm5 rom for us all ?
Thanks!
claros said:
In the wiki you can find a Dutch HTC__001 1.23.404.2 1.07.0000
http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades
Did you try it ?
Ciao
Click to expand...
Click to collapse
haha.. you're amazing... i think you need to post in the artemis forum since you have an artemis (a soon to be bricked artemis if you keep this up)
Hi,
I've flash my phone to the Schaps_WM6Pro_Trinity_4.30.2008_WWE_Full ROM and after several Soft Resets my M700 is stuck in the original bootloader screen.
My USB port does not work so I copied the des bootloader and ROM onto ny SD Card. Launched the des bootloader and the the ROM was flashed successfully. After some soft resets to change various registry settings the device is now stuck in the original bootloader screen (SPL-1.07.0000).
I've tried to flash the ROM again but it goes to a grey screen saying "loading" then displays "000068002". I've tried various ROMS and get the same error code.
As the orginal bootloader is displayed I think it's looking for a ROM with the same CID. The phone is a UK Orange M700.
Does anyone know where I can get the Orginal UK Orange ROM from? I've tried the Mozzer one without any luck and found French ROM gives me the error message "no allowed".
Hard Reset does not work, just takes me to the bootloader screen and I've left the battery on overnight.
As the USB does not work I can't use mmty to reset the device.
Please help
Thank you
Look on the Trinity WiKi and use the CD card flash method. This will allow you to flash without using the USB. Works every time
I can flash from SD card, but as the original bootloader is loaded I need ROM with CID from Orange UK
Oh... you need to unlock your phone first. That is probably where you are running into your problem. or you could try downloading your OEM rom and flash that using the sd card, then unlock, then have at it with a cooked rom
Has anyone got Part02.raw dump from an Orange UK M700. I might be able to build a new ROM if I can get my hands on one.
Thanks
Maybe you will find here
Here is the thread:
http://forum.xda-developers.com/showthread.php?t=308152
Here is the full dumped rom:
http://forum.xda-developers.com/showpost.php?p=1281918&postcount=14
And here is the Orange splash screen:
http://forum.xda-developers.com/showpost.php?p=1284708&postcount=22
Hi fktsndr
I've tried those without any luck.
I've bitten the bullet and have sent it off for repair.
moodog101 said:
Hi fktsndr
I've tried those without any luck.
I've bitten the bullet and have sent it off for repair.
Click to expand...
Click to collapse
OK, if you get it back I suggest you to replace the original spl to hard-spl!
With hard-spl you will not stuck in bootloader any more.
But of course you can restore the original spl
Yep,
have learnt my lesson and if the phone is repairable then I'll Hard-SPL it and take a backup of my ROM.
Cheers for the help
One last question
mobile phone couldn't fix it so looks like a trip to Orange which could be pricey, but one last question. I have various nbh files for the M700 but they all have the wrong CID. Do you know if it's possible to change the CID in a nbh file so that I can use it for Orange UK (ORANG001)
cheers
moodog101 said:
mobile phone couldn't fix it so looks like a trip to Orange which could be pricey, but one last question. I have various nbh files for the M700 but they all have the wrong CID. Do you know if it's possible to change the CID in a nbh file so that I can use it for Orange UK (ORANG001)
cheers
Click to expand...
Click to collapse
Unfortunatelly I do not know. But hard-spl ignore cid, so you will not have cid problems.
About NBH, you should ask Ervius in this thread (he is a rom cooker):
http://forum.xda-developers.com/showthread.php?t=320504
Hello everybody,
I bought a P4350 from Spain a few days ago and "unfortunately" the Spanish HTC Official WM6 upgrade was already installed on it. This means that my phone is CID Unlocked so I cannot install an English WM6 version. (I tried to, but in vain...).
I've tried several WM5 device CID unlocking methods, but they all failed.
Can anyone help me?
Unfortunately there is not much information on the web for HTC Herald CID Unlocking as there is for other HTC's (Wizard, Hermes,...)...
HardSPL is CID unlock
or you can USPL an english RUU without the SPL.nbh
or you could just USPL/HSPL a custom rom
ok i'm gonna check for more information about "USPLing an english RUU without the SPL.nbh" on the web.
If you have any pertinent link to provide, it would be useful for me.
http://forum.xda-developers.com/showthread.php?t=401061
this is your one free link. Welcome to XDA-devs
you can start by tellings us your IPL/SPL versions
hold camera button while u power on, give u a tricolor-screen with a numbers
IPL 4.17.0002
SPL 4.17.0000
I couldn't hardSPL my Herald...
I was finally able to change my ROM thanks to your link!
I'm wondering if there is a ROM including the latest features of HTC diamond for Herald devices.
I've been searching, but if anyone has a link it would be helpful.
Thanks.
I found two different ROMs that include the Touch Dialer (which I find to be a very interesting feature).
Both ROMs included only an NBH file which had to be copied to my micro-sd card. Then I would run my Herald in bootloader-mode so that my device recognizes the file and perform the installation. But it does not.
I don't know what I should do to let my device detect the new ROM file...
I tried copying the NBH file to the RUU Folder of the Flash center and ran it, but it doesn't work either...