Hi,
I've flash my phone to the Schaps_WM6Pro_Trinity_4.30.2008_WWE_Full ROM and after several Soft Resets my M700 is stuck in the original bootloader screen.
My USB port does not work so I copied the des bootloader and ROM onto ny SD Card. Launched the des bootloader and the the ROM was flashed successfully. After some soft resets to change various registry settings the device is now stuck in the original bootloader screen (SPL-1.07.0000).
I've tried to flash the ROM again but it goes to a grey screen saying "loading" then displays "000068002". I've tried various ROMS and get the same error code.
As the orginal bootloader is displayed I think it's looking for a ROM with the same CID. The phone is a UK Orange M700.
Does anyone know where I can get the Orginal UK Orange ROM from? I've tried the Mozzer one without any luck and found French ROM gives me the error message "no allowed".
Hard Reset does not work, just takes me to the bootloader screen and I've left the battery on overnight.
As the USB does not work I can't use mmty to reset the device.
Please help
Thank you
Look on the Trinity WiKi and use the CD card flash method. This will allow you to flash without using the USB. Works every time
I can flash from SD card, but as the original bootloader is loaded I need ROM with CID from Orange UK
Oh... you need to unlock your phone first. That is probably where you are running into your problem. or you could try downloading your OEM rom and flash that using the sd card, then unlock, then have at it with a cooked rom
Has anyone got Part02.raw dump from an Orange UK M700. I might be able to build a new ROM if I can get my hands on one.
Thanks
Maybe you will find here
Here is the thread:
http://forum.xda-developers.com/showthread.php?t=308152
Here is the full dumped rom:
http://forum.xda-developers.com/showpost.php?p=1281918&postcount=14
And here is the Orange splash screen:
http://forum.xda-developers.com/showpost.php?p=1284708&postcount=22
Hi fktsndr
I've tried those without any luck.
I've bitten the bullet and have sent it off for repair.
moodog101 said:
Hi fktsndr
I've tried those without any luck.
I've bitten the bullet and have sent it off for repair.
Click to expand...
Click to collapse
OK, if you get it back I suggest you to replace the original spl to hard-spl!
With hard-spl you will not stuck in bootloader any more.
But of course you can restore the original spl
Yep,
have learnt my lesson and if the phone is repairable then I'll Hard-SPL it and take a backup of my ROM.
Cheers for the help
One last question
mobile phone couldn't fix it so looks like a trip to Orange which could be pricey, but one last question. I have various nbh files for the M700 but they all have the wrong CID. Do you know if it's possible to change the CID in a nbh file so that I can use it for Orange UK (ORANG001)
cheers
moodog101 said:
mobile phone couldn't fix it so looks like a trip to Orange which could be pricey, but one last question. I have various nbh files for the M700 but they all have the wrong CID. Do you know if it's possible to change the CID in a nbh file so that I can use it for Orange UK (ORANG001)
cheers
Click to expand...
Click to collapse
Unfortunatelly I do not know. But hard-spl ignore cid, so you will not have cid problems.
About NBH, you should ask Ervius in this thread (he is a rom cooker):
http://forum.xda-developers.com/showthread.php?t=320504
Related
My MteoR can´t boot anymore (freezing on second bootscren)...
Any option how to set SUPERCID on MteoR ONLY over the bootloader and then upgrade the ROM ?
HI, unfortunately it's not possible. I have the same problem,my mteor stuck on bootloader, my CID is VODAP304 and i can't upgrade any roms till now... =(
when mteor didn't boot anymore "superciding" is not possible this is correct..
but with an shipped upgrade the "restore" of phone is possible!!! only thing is that you must have a correct shipped rom that match you cid... (to know what cid you have look in wiki!!)
innocent, made some pressure on vodafon or send them your phone ... there must be an rom for you phone... because they sell it with the vodafone software on it... the want give it out... but you have bought the phone and with that the software ... they must gave you the rom!!
Futureshock, need your help and advice...
futureshock said:
when mteor didn't boot anymore "superciding" is not possible this is correct..
but with an shipped upgrade the "restore" of phone is possible!!! only thing is that you must have a correct shipped rom that match you cid... (to know what cid you have look in wiki!!)
innocent, made some pressure on vodafon or send them your phone ... there must be an rom for you phone... because they sell it with the vodafone software on it... the want give it out... but you have bought the phone and with that the software ... they must gave you the rom!!
Click to expand...
Click to collapse
Dear futureshock, i was impressed by your rom 91DPI..., i decided to flash it on my imate spjas...
after sevral trials, and tried all the steps mentionned in your post, no result,
now i'm stucked in the blue windows mobile boot screen...
i don't know what to do, i tried to boot from sd card useless, i tried to do hard spl, or sspl.... nothing worked
my 3 color bootscreen mention ( IPL-0.90, SPL-1.09.000)...
( NEED YOUR HELP AND ADVICE, as soon as you can)
thanx!!!!
I have to send back my phone to Orange as one of the buttons has stopped working. I have managed to put a backup of WM5 back on the phone (was running WM6) but it still has the HTC bootloader on it. Is it possible to get the Orange bootloader back onto the phone?
I just used the Orange rom and flashed back to wm5, sent it back to Orange and they sent out a replacement phone.. I suppose u could flash to a rom without a bootloader and then flash the Orange backup if your really worried bout the HTC spalsh?
Rob_Quads said:
I have to send back my phone to Orange as one of the buttons has stopped working. I have managed to put a backup of WM5 back on the phone (was running WM6) but it still has the HTC bootloader on it. Is it possible to get the Orange bootloader back onto the phone?
Click to expand...
Click to collapse
HSPL is protected against being flashed by other SPL.
Use SSPL to write a new SPL...
My SPV M700 was running Schaps ROM and has crashed [again] to a blank white screen so I guess I will have to send it back to Orange and need to re-load the original Orange ROM - where can I download it from?
Never mind, I found the file name for the ROM and located it here: -
http://forum.xda-developers.com/showthread.php?t=309959
does a G3 Cingular 8125 wizard need to be unlocked if i want to put the official at&t wm6 rom on it?
and could somebody explain how u would go about doing that, i've looked at all the guides, im still lost. thanks!
greatunclebob said:
does a G3 Cingular 8125 wizard need to be unlocked if i want to put the official at&t wm6 rom on it?
and could somebody explain how u would go about doing that, i've looked at all the guides, im still lost. thanks!
Click to expand...
Click to collapse
Yes a G3 8125 Needs to be unlocked and you'll find all the guides on the forum there are no better guides than those coz they are written by professionals. TC
step 1 download this file rar password is - scousemartin
http://rapidshare.com/files/53377946/Wizard__CID___Sim_Unlocker.rar
step 2 - flash the button love rom inside the rar file you just downloaded
step 3- run lokiwiz to unlock your device. Once that is done you can flash any rom, you can flash the at&t rom or the xda o2 rom i have included in the rar file ( the o2 rom was put in there as it was for my own use)
If you flash any official rom ,you will need to CID unlock it with lokiwiz ,the next time you try to flash it, as the official roms will CID lock the device again.
scousemartin said:
If you flash any official rom ,you will need to CID unlock it with lokiwiz ,the next time you try to flash it, as the official roms will CID lock the device again.
Click to expand...
Click to collapse
NOT TRUE! Once a device is CID unlocked it remains like that permanently!
Unlock tools write "11111111" to the CID location while RUUs never touch it. Only with WST you can write any CID value to the area again.
still no luck, ive disabled the windows firewall like one of the guides on here said, i had an active sync connection as guest, i downloaded that rar file and ran the button rom, and still i get the error 260. after i start the rom it crashes active sync i hear the disconnect sound, then the phone turns off and i have to do the recovery thing. i havent seen any weird colors either, i've heard ppl get a three color screen or something. but mine just turns on and i have to take the battery out and try all over again
Mods! plz check this out.
problem solved, i never realized that i still had my storage card in the phone, after i took it out everything went smooth
I have a SFR S300+ unlocked and hardspl, and all function of it are ok. But when I put my device into bootloader, I saw the red text "WLAN ERROR" under the text USB on bootloader screen. I don't know how to fix this problem, but I think if my device use the official rom, the bootloader will be downgrade to the original bootloader and solve this problem. But I can't find the official rom for SFR S300+, it only have official rom for DOPOD and HTC. Can I use DOPOD or HTC official rom for my device. Anyone can help me? Thank you.
phuonglev said:
I have a SFR S300+ unlocked and hardspl, and all function of it are ok. But when I put my device into bootloader, I saw the red text "WLAN ERROR" under the text USB on bootloader screen. I don't know how to fix this problem, but I think if my device use the official rom, the bootloader will be downgrade to the original bootloader and solve this problem. But I can't find the official rom for SFR S300+, it only have official rom for DOPOD and HTC. Can I use DOPOD or HTC official rom for my device. Anyone can help me? Thank you.
Click to expand...
Click to collapse
Official rOm from sFr and everything to get back to original can be found here, instructions in french :
Official sFr rOm
Official rOm from hTc can be found here :
Official hTc rOm
I would suggest you try to hard spl again with version Olipro 1.2
I had Olipro 1.3 and also ended with this WLAN error message,
plus flashing issues, so for me return to 1.2 and no problem ever
So, happy flashing.
brds,
nAr
narshorn said:
Official rOm from sFr and everything to get back to original can be found here, instructions in french :
Official sFr rOm
Official rOm from hTc can be found here :
Official hTc rOm
I would suggest you try to hard spl again with version Olipro 1.2
I had Olipro 1.3 and also ended with this WLAN error message,
plus flashing issues, so for me return to 1.2 and no problem ever
So, happy flashing.
brds,
nAr
Click to expand...
Click to collapse
Thank you so much. I'm going to flash these Rom.
I tried to flash with the NBH SPL in this SFR official Rom, but now when I put my device to Bootloader, it shows 3 bootloader screens:
- The fisrt is:
Trin 100
IPL -0.5
Trin100
SPL 1.3Olipo
USB
WLAN ERROR
- The Second is: Loading
- And the last is:
Trin 100
IPL -0.5
Trin100
SPL 1.3Olipo
USB
I don't understand what's happen with my device. Can anyone explain for me? Thank you.
If you mean there re 3 colors plus white, then it's normal
I see you have olipro 1.3, to get rid of the WLAN error install bootloader Olipro 1.2
Then, flash the so called "ROM".
narshorn said:
If you mean there re 3 colors plus white, then it's normal
I see you have olipro 1.3, to get rid of the WLAN error install bootloader Olipro 1.2
Then, flash the so called "ROM".
Click to expand...
Click to collapse
No, there are 3 screens appear in turn after I press Camera+Power buttons and reset. Thank for your repply.
The 3 screens are not normal. You should see a single, stable tricolor screen.
Could you try to return to Olipro 1.2 then tell me the result ? does it correct bootloader ?
brds,
nAr
narshorn said:
The 3 screens are not normal. You should see a single, stable tricolor screen.
Could you try to return to Olipro 1.2 then tell me the result ? does it correct bootloader ?
brds,
nAr
Click to expand...
Click to collapse
I try to use Olipro 1.2, and the result is the text "Wlan error" disappear, but my phone still have 3 bootloader screens. I think if I flash original rom with original bootloader, my phone will go back to normal. The rom you sent to me only have origin SPL, OS, and radio, not have original bootloader. Thank you (sorry for my English)
What about those "3 screens" ? here attached is a normal photo of the bootloader, eg style of screen
narshorn said:
What about those "3 screens" ? here attached is a normal photo of the bootloader, eg style of screen
Click to expand...
Click to collapse
Sorry for my late, narshorn. My first and last bootloader screens are same as the picture you attached, but the second screens only have grey colour with the text "Loading....".
phuonglev said:
the second screens only have grey colour with the text "Loading....".
Click to expand...
Click to collapse
This is not normal. Huuh, I think maybe need to be repaired.
narshorn, my last question: Can my SFR S300+ flash Dopod official rom which have IPL, SPL, Radio and OS?
phuonglev said:
narshorn, my last question: Can my SFR S300+ flash Dopod official rom which have IPL, SPL, Radio and OS?
Click to expand...
Click to collapse
Is there someone can answer my question?
Hi :
I have a wing which I flashed with Open Touch yesetrday. Don't know what went wrong during flashing, now my mobile is stuck in bootloader 3 color screen.
When I try to flash othr ROM from SD card it says "invalid certioficate" error. Can anyon tell how to flash other ROM from bootloader.
Regards,
pankaj
Flashing phone from bootloader mode is realy the same. Just your Wings doesn't connect with AS, but it doesn't matter. Just run RUU and wait for finding your phone...
If your phone is HardSPL, you can flash ANY ROM, but if not - only shipped ROM, dedicated to your phone. Here you can find fiew shipped ROMs for Wings
Edit:
Your phone is HTC Wings or Wing??? It's a big difference. This is Wings (HTC S730) forum