Hi :
I have a wing which I flashed with Open Touch yesetrday. Don't know what went wrong during flashing, now my mobile is stuck in bootloader 3 color screen.
When I try to flash othr ROM from SD card it says "invalid certioficate" error. Can anyon tell how to flash other ROM from bootloader.
Regards,
pankaj
Flashing phone from bootloader mode is realy the same. Just your Wings doesn't connect with AS, but it doesn't matter. Just run RUU and wait for finding your phone...
If your phone is HardSPL, you can flash ANY ROM, but if not - only shipped ROM, dedicated to your phone. Here you can find fiew shipped ROMs for Wings
Edit:
Your phone is HTC Wings or Wing??? It's a big difference. This is Wings (HTC S730) forum
Related
My MteoR canĀ“t boot anymore (freezing on second bootscren)...
Any option how to set SUPERCID on MteoR ONLY over the bootloader and then upgrade the ROM ?
HI, unfortunately it's not possible. I have the same problem,my mteor stuck on bootloader, my CID is VODAP304 and i can't upgrade any roms till now... =(
when mteor didn't boot anymore "superciding" is not possible this is correct..
but with an shipped upgrade the "restore" of phone is possible!!! only thing is that you must have a correct shipped rom that match you cid... (to know what cid you have look in wiki!!)
innocent, made some pressure on vodafon or send them your phone ... there must be an rom for you phone... because they sell it with the vodafone software on it... the want give it out... but you have bought the phone and with that the software ... they must gave you the rom!!
Futureshock, need your help and advice...
futureshock said:
when mteor didn't boot anymore "superciding" is not possible this is correct..
but with an shipped upgrade the "restore" of phone is possible!!! only thing is that you must have a correct shipped rom that match you cid... (to know what cid you have look in wiki!!)
innocent, made some pressure on vodafon or send them your phone ... there must be an rom for you phone... because they sell it with the vodafone software on it... the want give it out... but you have bought the phone and with that the software ... they must gave you the rom!!
Click to expand...
Click to collapse
Dear futureshock, i was impressed by your rom 91DPI..., i decided to flash it on my imate spjas...
after sevral trials, and tried all the steps mentionned in your post, no result,
now i'm stucked in the blue windows mobile boot screen...
i don't know what to do, i tried to boot from sd card useless, i tried to do hard spl, or sspl.... nothing worked
my 3 color bootscreen mention ( IPL-0.90, SPL-1.09.000)...
( NEED YOUR HELP AND ADVICE, as soon as you can)
thanx!!!!
Hi all,
I'm trying to upgrade from Molski 2.26 to WM6 and now I am stuck on bootloader mode. Since I'm in bootloader mode, activesync is not seeing my device. Because of that, I can't even load any other rom images, the upgrade utility simply quits because of that. Can anyone help? Thanks.
IPL/SPL 2.26 --> G3
since your stuck in bootloader mode activesync won't be active. When you are in the bootloader screen, hook up your usb to you wizard. There look in the bottom left corner you will/should see usb displayed there. Once you can confirm that, run the RUU and flash an OFFICIAL CARRIER ROM. After that try flashing wm6 again. hope that helps you out. To find official carrier rom look in some of the stickies they should links for you.
Hi,
I also have a T-Mobile MDA, and I got stuck at the bootloader screen. I tried flashing Wizard Love ROM, but it doesnt flash either. I bought the phone from ebay, and I'm not in the US. When I try to download the TMobile ROM, it asks me for a valid TMobile phone number, which I dont have.
Is there any other place where I can get the TMobile ROM to flash on the phone?
I dont get it. If you're stuck in bootloader, just connect the usb cable and run official RUU.
Cheers,
vlodeck.
vlodeck said:
I dont get it. If you're stuck in bootloader, just connect the usb cable and run official RUU.
Cheers,
vlodeck.
Click to expand...
Click to collapse
Not being a customer of TMobile, I cant download the official ROM update from the TMobile website, cause they require a TMobile number in order to download the ROM
This should help you out <----- hope that helps you out latest t-mobile mda rom ipl/spl 2.26
Hi,
I've flash my phone to the Schaps_WM6Pro_Trinity_4.30.2008_WWE_Full ROM and after several Soft Resets my M700 is stuck in the original bootloader screen.
My USB port does not work so I copied the des bootloader and ROM onto ny SD Card. Launched the des bootloader and the the ROM was flashed successfully. After some soft resets to change various registry settings the device is now stuck in the original bootloader screen (SPL-1.07.0000).
I've tried to flash the ROM again but it goes to a grey screen saying "loading" then displays "000068002". I've tried various ROMS and get the same error code.
As the orginal bootloader is displayed I think it's looking for a ROM with the same CID. The phone is a UK Orange M700.
Does anyone know where I can get the Orginal UK Orange ROM from? I've tried the Mozzer one without any luck and found French ROM gives me the error message "no allowed".
Hard Reset does not work, just takes me to the bootloader screen and I've left the battery on overnight.
As the USB does not work I can't use mmty to reset the device.
Please help
Thank you
Look on the Trinity WiKi and use the CD card flash method. This will allow you to flash without using the USB. Works every time
I can flash from SD card, but as the original bootloader is loaded I need ROM with CID from Orange UK
Oh... you need to unlock your phone first. That is probably where you are running into your problem. or you could try downloading your OEM rom and flash that using the sd card, then unlock, then have at it with a cooked rom
Has anyone got Part02.raw dump from an Orange UK M700. I might be able to build a new ROM if I can get my hands on one.
Thanks
Maybe you will find here
Here is the thread:
http://forum.xda-developers.com/showthread.php?t=308152
Here is the full dumped rom:
http://forum.xda-developers.com/showpost.php?p=1281918&postcount=14
And here is the Orange splash screen:
http://forum.xda-developers.com/showpost.php?p=1284708&postcount=22
Hi fktsndr
I've tried those without any luck.
I've bitten the bullet and have sent it off for repair.
moodog101 said:
Hi fktsndr
I've tried those without any luck.
I've bitten the bullet and have sent it off for repair.
Click to expand...
Click to collapse
OK, if you get it back I suggest you to replace the original spl to hard-spl!
With hard-spl you will not stuck in bootloader any more.
But of course you can restore the original spl
Yep,
have learnt my lesson and if the phone is repairable then I'll Hard-SPL it and take a backup of my ROM.
Cheers for the help
One last question
mobile phone couldn't fix it so looks like a trip to Orange which could be pricey, but one last question. I have various nbh files for the M700 but they all have the wrong CID. Do you know if it's possible to change the CID in a nbh file so that I can use it for Orange UK (ORANG001)
cheers
moodog101 said:
mobile phone couldn't fix it so looks like a trip to Orange which could be pricey, but one last question. I have various nbh files for the M700 but they all have the wrong CID. Do you know if it's possible to change the CID in a nbh file so that I can use it for Orange UK (ORANG001)
cheers
Click to expand...
Click to collapse
Unfortunatelly I do not know. But hard-spl ignore cid, so you will not have cid problems.
About NBH, you should ask Ervius in this thread (he is a rom cooker):
http://forum.xda-developers.com/showthread.php?t=320504
i've been at this for the better of 9 hours im stuck at the stock .57 spl bootloader screen, it says upgrade rom code error please try again been trying to flash spl unlockers all day.... i get a 0% progress bar and thats it...
i moved to a new computer, redownloaded everything and still the same result.
i hard reset/soft reset, goes right back to the bootloader.
this is a sprint/cdma phone.
"DIAM500
SPL-0.57.0000
MicroP-Diam (LED) vB
PSOC-Diam STAGE_EVT v20
Upgrade ROM code error
Please try again"
Try flashing the Olinex Hard-SPL version if you haven't tried that one already.
If that doesn't work download the OFFICIAL ROM update and install it -- but make sure you flash the correct one. For example, if your HTC Diamond is Orange Branded then download the Orange ROM Update, or if theres no branding then download the HTC version. Since yours is Sprint, see if you can find an official ROM upgrade for that.
prank1 said:
Try flashing the Olinex Hard-SPL version if you haven't tried that one already.
If that doesn't work download the OFFICIAL ROM update and install it -- but make sure you flash the correct one. For example, if your HTC Diamond is Orange Branded then download the Orange ROM Update, or if theres no branding then download the HTC version. Since yours is Sprint, see if you can find an official ROM upgrade for that.
Click to expand...
Click to collapse
thanks for your input! i really do think thats all i need is an official cdma rom, i tried a gsm rom (no worries the CID stops it) and the progress bar acually goes to 1%, so something is working, you wont believe how much i jumped for joy when i saw that.
I have HTC HD7 with Windows 7.
While updating phone using ZUNE, the update has interrupter. and now my phone is not starting. it struk up at the boot scree (white background with HTC logo, the very first screen when we start the phone)
So, can I restore it ? What should I do now ?
What kind of HD7 is it? (Europe-, T-Mobile-, O2-,... Version)
If possible you can flash a orginal rom that suits your ID, or flash hspl & one of the roms of the HD7 development section
sandman01 said:
What kind of HD7 is it? (Europe-, T-Mobile-, O2-,... Version)
If possible you can flash a orginal rom that suits your ID, or flash hspl & one of the roms of the HD7 development section
Click to expand...
Click to collapse
I'm not sure about it. That mobile can be from Australia or London*, its not working with Indian sim card So i was on try to make it working and failed at update, but when it was booting it have the logo O2 which you have listed.
So can say its O2 ?
So if you want to play a little bit with it, we have a few possibilities.
First if its really a O2 phone try this rom:
latest O2 rom
If it works, you have an original NoDo rom installed.
If not, or you want more freedom at you phone do the following:
shut down the phone (e.g. remove battery & reinsert it in the phone)
start the phone & hold the volume down key to enter RUU
Check if the Text at the upper left is mentioned in this thread.
HSPL
e.g. PD29100 is mine, wich works
if yes download an install the xspl from the link and you will get the possibility to flash a HD7 rom you like
for information to flash xspl on your phone you need ActiveSync (WinXP) or Windows Mobile Device Center (Vista & Win7)
if your PD number isn't supported at the moment, we need to talk again.
sandman01 said:
So if you want to play a little bit with it, we have a few possibilities.
First if its really a O2 phone try this rom:
latest O2 rom
If it works, you have an original NoDo rom installed.
If not, or you want more freedom at you phone do the following:
shut down the phone (e.g. remove battery & reinsert it in the phone)
start the phone & hold the volume down key to enter RUU
Check if the Text at the upper left is mentioned in this thread.
HSPL
e.g. PD29100 is mine, wich works
if yes download an install the xspl from the link and you will get the possibility to flash a HD7 rom you like
for information to flash xspl on your phone you need ActiveSync (WinXP) or Windows Mobile Device Center (Vista & Win7)
if your PD number isn't supported at the moment, we need to talk again.
Click to expand...
Click to collapse
Thanks alot, the link you gave me of O2 worked like a charm . Thanks a million for spending your time for issue
Yes, the link you gave worked and i have flashed that new O2 rom with some restarts. Now every thing seems to be ok, but I have lost all my pics (not a prob)
But, as it belong to UK O2 it is not allowing me to use Indian sim card. can I have solution for this ? Will it work if I flash Asia ROM on my phone now ?
If not what could be the solution ? As you have asked me the Number which starts with PD
Her is what it shows on the boot (red) screen
PD29100 SS-BC (4k)
SPL-3.4.2250.0 (121027)
MicroP(LED) 0x07
Touch S1(v1.8,#1624)
Thanks again for your help, you made my day
Thanks and regards > code3h
Sorry, I forgot to inform you that flashing operations always perform an reset of the device.
Only the update process by zune prevent you from loosing you data & settings.
(and the new costum RUU's for Radio,... flashing)
with your PD29100 you can also use xspl by cotulla (see link)
with that you can flash also costum roms & every original HD7 rom you like to test.
We always taked about rom flashing and CID unlocking (xspl) to flash different roms.
sim unlocking is completely seperated from that.
to use other sim cards than the o2 (becaus it seems that you phone is o2 sim locked) you have to search the web for a service who can generate you a unlock code or go to the next phone shop that can sim unlock HTC devices.
sim unlocking costs money (at the moment) because there is no tool for that yet that can genaerate such codes for your HD7