Database Develop

please help!!! my qtek 9100 stucked on bootloader screen!!

Hy guys...i have a problem, my device stucked in bootloader mode..can someone help me? please, IPL 2.18, SPL 2.18

soft reset

i tried to install another rom, but on 98% stucked...can i put wm6?

come on... help yourself, have you cid unlocked? what was the error message?...

so, i tried now to install a wm5 version, and on PC it's showing 99% and i'm still waiting about 1h, and on phone 98%

i repeat
bbobeckyj said:
have you cid unlocked? what was the error message?...
Click to expand...
Click to collapse

i read "how to cid unlock" but it is written there to copy a file on ppc memory, but i can't enter on it, only in bootloader mode

ok, you need to flash the rom that the device came with ( o2, cingular, vodaphone, tmo etc) then cid unlock

i understood that..but i don't know what rom do i need, because i have brought at second hand, from a guy, and it was in french, and i tried to install in english, but stucked on 98%

you'll have to try each french rom until one works
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
i can only see 2 french roms on the wiki, both are qtek, is that what your wizard is branded as?
also try the 'button rom' and then cid unlock
it's past my bedtime now, i'll check this in the morning. but short of holding your hand and giving a button by button tutorial, you know everything there is to know

yes it is qtek...thank you very much, i will see what i can do..i will let you know about the results

i can't download the files, because was deleted

it worked..thanks, without cid unlock, but thank you anyway for you time

now, you must cid unlock before flashing another rom

i tried to do that, and when i want to downgrade to button's 1.05 ROM it's getting stucked on 98%

now..i've made it again...i have wm5 on it..i made cid unlock, but my problem is that every time i try to install wm6 on it, it appears to me wm5...why? with each version

OK... two things - firstly, have you gone through ALL the steps in the stickied G3 unlocking thread? You mustn't miss any out, no matter how long it takes.
Secondly, what operating system is on the PC you're trying to unlock from?
One more thing - when your device starts from a soft reset, please write down and post the IPL and SPL numbers that appear on the first boot screen.

http://forum.xda-developers.com/showthread.php?t=306501

JoelC said:
OK... two things - firstly, have you gone through ALL the steps in the stickied G3 unlocking thread? You mustn't miss any out, no matter how long it takes.
Secondly, what operating system is on the PC you're trying to unlock from?
One more thing - when your device starts from a soft reset, please write down and post the IPL and SPL numbers that appear on the first boot screen.
Click to expand...
Click to collapse
which are the steps? please give it to me a link...i wrote in the first post the ipl and spl

you can type, so you must be able to read, yes?
we've both given you the link more than once AND it is in my signature in all of my posts. what more can you want?

Help With CID-Unlock

Hi to all.
Mi Mteor have SPL2.05 and is application unlocked now.
The instructions says that i have to get hardSPL-1.40 in order to can CID-UNLOCK the device. Where i donwload it?
When i run the AUTO_Unlock_v3a.bat , the device no reboot in bootloader mode. Only get a blank screen.
Please, help me.
Yhanks. Sorry for mi bad english.

just read wiki and other posts here... it is still explained here...
you have to enter the bootloader a nother way.. because when using the normal cid unlock file you use a herm enterbl.exe ...
but i prefer to use sspl and not to supercid the device...

I read it. Perhaps i don´t understand everything, because english is not my primary language.
I see the are two metods to unlock the sim and CID. Supercid or SSPL.
I want to unlock the sim and update the rom.
Thanks a lot.

for simunlock just look into the threads in the past here... (pages on bottom of forum) ... theres somewhere explained how...
maybe i have also entered some infos in wiki...
for updating rom the easiest way is to app unlock the phone (to launch unsigned apps -> wiki) and then copy the sspl files to phones root...
a *.lnk file a exe file and a rom file...
launch the lnk file and then start the update you want!! ...
with the sspl method your phone is for one! start and only for that one! supercided! so that means you can install any rom ... no matter what provider is the rom from..
also you can flash than cooked roms... with no cid inside... (like my german rom...)
but remember ... when flashing because what ever not work, and you cant boot the phone up to relaunch the files... you have a problem when you don't own a, in your case so far i can see, a Vodafon Shipped Rom for Breeze...
innocent here in forum has the problem... vodafon gives no shipped rom out...
maybe you can ask them from different sides .... my vodafon partner here in austria (a1) did not offer the breeze... so i can't ask them... (i work in the co company...)
steve

Rom'd Dopod 595 strange CID (after 1.34)

I have been trying to recover my (currently) bricked Dopod 595 after a ROM upgrade totally screwed it up.
I did the 1.34 ROM upgrade that changed the SPL to 1.10 and after that deviced that I should revert to the original Dopod ROM. I managed to do it by replacing the nbh files on the 1.34 RUU. The ROM writing seemed to be successful but the device does not move beyond the second boot screen.
So I tried to apply the RUU again, only to get the vendor ID warning, which I was not expecting.
Using mtty, and issuing info 2, this is my result:
HTCSF kEØ(HTCE
What the hell does that mean??? It almost seems like the CID was badly written... Was it supposed to be HTCEUR?
Is there any was I can recover this, perhaps by hacking a ROM to match that CID?
Thanks in advance!
sol2k

i think easiest way to repair this is if you have warrenty just send it to repair to htc...

futureshock,
Yes, I could do that. Not sure how to explain to the service center what happened, tho...
Anyway, thanks for the advice.
sol2k

I have the same problem too. Any solution yet?

You need to send it in if warranty... just tell them the blardy unit refuse to start... I did the same and they replace the board for free... i am in Malaysia though...

help-"fish" at herald's place

hello
i bought a HTC Herald(p4350, not tmo wing) yesterday.
i flashed the wm5 to wm6, but they aren't so good..
i would like to flash a new rom (touch it 2.*) but i think the device is CID-Locked.
in htc wizard there was a tool: lockwiz.bat
which unlocked my device (g3)
question is:
are there any program or sg, that unlocks, and "RE LOCKS" ( because of the warranty) my pda?
i need a guide also, and i don't like to pay for it (i am student)
please help me!
regard, pulyka

I flashed my wing without having to CID-unlock it .............. so I doubt you will need to CID-unlock your p4350

To flash a rom, you can use aserg's method.
When you DL a rom, you recieve bunches of other files.
First install a fresh RUU.
Then, install aserg policies.cab, then soft reset.
Then click an run 1_UPGRADE_ROM.bat
Wait and don't touch your herald.
When it says its done, hard reset and voila!

thank you Jamaican!
can i use this rom: Touch-It for CID locked wings! ( http://forum.xda-developers.com/showthread.php?t=332998 )?
and is that a problem that i have black htc herald, and not blue t-mo wing?
or they are exactly the same devices internally, and the difference is only the covers?
fzzyrn: thank you too, where can i find guide?

They are exactly the same device, just defferent outside design and keyboard layout ............... you can try the touch-it v2.0 by itje located here
http://forum.xda-developers.com/showthread.php?t=334323
make sure to read the text file in the package first before attempting the update

thx!
i will try it tomorrow

You can use the Touch-IT 2.0 without any problem, i have a p4350 cid locked and works fine with the aserg´s method

Stuck in Bootloader

Hi,
I've flash my phone to the Schaps_WM6Pro_Trinity_4.30.2008_WWE_Full ROM and after several Soft Resets my M700 is stuck in the original bootloader screen.
My USB port does not work so I copied the des bootloader and ROM onto ny SD Card. Launched the des bootloader and the the ROM was flashed successfully. After some soft resets to change various registry settings the device is now stuck in the original bootloader screen (SPL-1.07.0000).
I've tried to flash the ROM again but it goes to a grey screen saying "loading" then displays "000068002". I've tried various ROMS and get the same error code.
As the orginal bootloader is displayed I think it's looking for a ROM with the same CID. The phone is a UK Orange M700.
Does anyone know where I can get the Orginal UK Orange ROM from? I've tried the Mozzer one without any luck and found French ROM gives me the error message "no allowed".
Hard Reset does not work, just takes me to the bootloader screen and I've left the battery on overnight.
As the USB does not work I can't use mmty to reset the device.
Please help
Thank you

Look on the Trinity WiKi and use the CD card flash method. This will allow you to flash without using the USB. Works every time

I can flash from SD card, but as the original bootloader is loaded I need ROM with CID from Orange UK

Oh... you need to unlock your phone first. That is probably where you are running into your problem. or you could try downloading your OEM rom and flash that using the sd card, then unlock, then have at it with a cooked rom

Has anyone got Part02.raw dump from an Orange UK M700. I might be able to build a new ROM if I can get my hands on one.
Thanks

Maybe you will find here
Here is the thread:
http://forum.xda-developers.com/showthread.php?t=308152
Here is the full dumped rom:
http://forum.xda-developers.com/showpost.php?p=1281918&postcount=14
And here is the Orange splash screen:
http://forum.xda-developers.com/showpost.php?p=1284708&postcount=22

Hi fktsndr
I've tried those without any luck.
I've bitten the bullet and have sent it off for repair.

moodog101 said:
Hi fktsndr
I've tried those without any luck.
I've bitten the bullet and have sent it off for repair.
Click to expand...
Click to collapse
OK, if you get it back I suggest you to replace the original spl to hard-spl!
With hard-spl you will not stuck in bootloader any more.
But of course you can restore the original spl

Yep,
have learnt my lesson and if the phone is repairable then I'll Hard-SPL it and take a backup of my ROM.
Cheers for the help

One last question
mobile phone couldn't fix it so looks like a trip to Orange which could be pricey, but one last question. I have various nbh files for the M700 but they all have the wrong CID. Do you know if it's possible to change the CID in a nbh file so that I can use it for Orange UK (ORANG001)
cheers

moodog101 said:
mobile phone couldn't fix it so looks like a trip to Orange which could be pricey, but one last question. I have various nbh files for the M700 but they all have the wrong CID. Do you know if it's possible to change the CID in a nbh file so that I can use it for Orange UK (ORANG001)
cheers
Click to expand...
Click to collapse
Unfortunatelly I do not know. But hard-spl ignore cid, so you will not have cid problems.
About NBH, you should ask Ervius in this thread (he is a rom cooker):
http://forum.xda-developers.com/showthread.php?t=320504