Help With CID-Unlock - HTC Breeze

Hi to all.
Mi Mteor have SPL2.05 and is application unlocked now.
The instructions says that i have to get hardSPL-1.40 in order to can CID-UNLOCK the device. Where i donwload it?
When i run the AUTO_Unlock_v3a.bat , the device no reboot in bootloader mode. Only get a blank screen.
Please, help me.
Yhanks. Sorry for mi bad english.

just read wiki and other posts here... it is still explained here...
you have to enter the bootloader a nother way.. because when using the normal cid unlock file you use a herm enterbl.exe ...
but i prefer to use sspl and not to supercid the device...

I read it. Perhaps i don´t understand everything, because english is not my primary language.
I see the are two metods to unlock the sim and CID. Supercid or SSPL.
I want to unlock the sim and update the rom.
Thanks a lot.

for simunlock just look into the threads in the past here... (pages on bottom of forum) ... theres somewhere explained how...
maybe i have also entered some infos in wiki...
for updating rom the easiest way is to app unlock the phone (to launch unsigned apps -> wiki) and then copy the sspl files to phones root...
a *.lnk file a exe file and a rom file...
launch the lnk file and then start the update you want!! ...
with the sspl method your phone is for one! start and only for that one! supercided! so that means you can install any rom ... no matter what provider is the rom from..
also you can flash than cooked roms... with no cid inside... (like my german rom...)
but remember ... when flashing because what ever not work, and you cant boot the phone up to relaunch the files... you have a problem when you don't own a, in your case so far i can see, a Vodafon Shipped Rom for Breeze...
innocent here in forum has the problem... vodafon gives no shipped rom out...
maybe you can ask them from different sides .... my vodafon partner here in austria (a1) did not offer the breeze... so i can't ask them... (i work in the co company...)
steve

Related

SOLUTION FOUND -CID/sim UNLOCKING FOR WIZARD WITH AKU2 ROMS.

warnning; does not work with g4 wizards!!!!!
this steps are to cid unlock and also to unlock sim in the folowing devices; qtek 9100, i-mate k-jam, mda vario, orange spv m3000, o2 xda mini s, dopod 838, Cingular 8125
first; you must make a full backup of you wizard before doing this , I personally use [wizBackup.exe] posted below for my backups and restores. This is not mandatory but could save an enormous amount of trouble.
I as most people with a wizard with the aku2 rom found out that it cannot be cid unlock with lokiwiz tool, you will get the following;{error:itwritedisk-an internal error occurred}.
. that is till now.
downgrade rom here http://dl.dropbox.com/u/7696581/htc%20wizard/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
note- this steps is for unlocking the cid of the wizard with aku2 rom.
how to cid. unlock all wizard variants ( that have the latest rom build )
first download custom__ruu_wizard_1050412_wwe_101_11210_wwe. rom from the ftp site from the above link, unpack it and just click the romupdateutility_wizard_noid.exe to start downgrading. Simply follow the prompts.
after the rom are loaded go thru the initial setup as you would with any rom.
now download the (lokiwiz02b) from here;
http://dl.dropbox.com/u/7696581/htc wizard/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Make sure you unzip lokiwiz to the root o the c: drive.
please copy the whole lokiwiz folder to the root of the drive,not the contentents of the folder!!!!!
and follow the instructions .do not forget to copy the cab file(enable rapi) to your device and run it before running lokiwiz.
Now run lockiwiz and unlock your machine, your machine will reboot itself. if yoy see an eroot while unlocking that says;
..............................................................................................................................................................................
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occurred.
this means that you device not been unloked......try again............
.................................................................................................................................................................................
That’s it your wizard is unlocked. Make sure yew keep the [lock_backup.bin] in a safe place you may need it for guaranty purposes.
Now flash the latest aku2 rom from your provider.- [very important,to avoid future problems wit rom updates]
then u can flash any rom you want.
question: if i cid unlock and sim unlock my phone (after installing custom 1.5 wwe rom) and then i install latest aku2 i-mate italian rom, will the sim unlock (and cid one too) be preserved?
Answer: i can confirm that that upgrading to the latest aku2 rom the wizard remains cid unlocked.
Special thanks to the author of the above cooked rom [button] also to machinagod for the lokiwiz tool and joninla for finding the downgrade rom, molski for is input and everyone that contributed to the cause.
do not try to downgrade using an older wizard rom other than the one posted above it will not work
also this {how to} is for the htc wizard only it may work with other devices but i don’t know, so if you turn you device into a brick do not blame me. use it at your own risk
if you device is from a operator like: 02, orange etc... You will void your guaranty unlocking cid, but don’t despair, if you keep the [lock_backup.bin] file that the lockiz tool generated you can restore cid to factory default.
this proccess only needs to be done once in the wizards lifetime.
Enjoy;
Jose faria.
donate if you like my work
Faria, can you tell me if this process will do it for the HTC Prophets with rom 2.x ???
I've got an imate JAMin with aku2 from factory. Just downloaded older Imate Rom... will try the process when i get home
8) wish me luck
maybe if you find an older rom for you device i only have a wizard.take a look at the lokiwiz tread i belive tha someone mentioned the HTC Prophets.
jamichy said:
I've got an imate JAMin with aku2 from factory. Just downloaded older Imate Rom... will try the process when i get home
8) wish me luck
Click to expand...
Click to collapse
Bet I will!!
For the record, your Jamin's rom is the same that was available to download some weeks ago with the Aku2??
jamichy said:
I've got an imate JAMin with aku2 from factory. Just downloaded older Imate Rom... will try the process when i get home
8) wish me luck
Click to expand...
Click to collapse
let me know how you get on.
onesolo said:
Faria, can you tell me if this process will do it for the HTC Prophets with rom 2.x ???
Click to expand...
Click to collapse
it may be possible,if you have an old custom rom for your device ,found this;
On the one hand, HTC Prophet is a complete copy (both software and hardware are meant) of HTC Wizard. On the other hand, it's equal to HTC Magician in appearance. That is why today review will be quite short, we will only discuss external elements and a new camera, all other aspects were highlighted in the review of HTC Wizard.
http://www.mobile-review.com/pda/review/htc-prophet-en.shtml
Hi Faria, thank you for your HowTo!
Now i know the wizard remains CID unlocked after the upgrade and that's good. I only hope that it stays SIM unlocked too.
Bye
Sadly, cant move back to older rom... keep getting error message saying the nk.nbf file is not valid/older than your current file.
I guess we just have to wait for an updated version of Lockiwiz
sh*t forgot to post the address to the downgrade rom.here it ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
sorry guys
jamichy said:
Sadly, cant move back to older rom... keep getting error message saying the nk.nbf file is not valid/older than your current file.
I guess we just have to wait for an updated version of Lockiwiz
Click to expand...
Click to collapse
yes u can, use this rom to downgrade
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
faria said:
jamichy said:
Sadly, cant move back to older rom... keep getting error message saying the nk.nbf file is not valid/older than your current file.
I guess we just have to wait for an updated version of Lockiwiz
Click to expand...
Click to collapse
yes u can, use this rom to downgrade
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Click to expand...
Click to collapse
Hello, could you please tell me what is changed in the custom ROM???
I am willing to do the same thing for the prophet.
Thanks
nothing except i did not post the link to the rom by mistake,did you use an old i-mate rom to downgrade? do not it will not work, use the one in the above link.thats the only one that it will work that a know for sure.
faria said:
nothing except i did not post the link to the rom by mistake,did you use an old i-mate rom to downgrade? do not it will not work, use the one in the above link.thats the only one that it will work that a know for sure.
Click to expand...
Click to collapse
You mean to use the wizard rom on the prophet?
Won't that overwrite the bootloader with the one for the wizard???
andrew_sh said:
faria said:
nothing except i did not post the link to the rom by mistake,did you use an old i-mate rom to downgrade? do not it will not work, use the one in the above link.thats the only one that it will work that a know for sure.
Click to expand...
Click to collapse
You mean to use the wizard rom on the prophet?
Won't that overwrite the bootloader with the one for the wizard???
Click to expand...
Click to collapse
haaa you have the prophet
dont do that it may turn the prophet into a brick the only way is to find an old custom rom for your device. take a look at the ftp site it may have one there.
sorry
I told you Faria that it can be done
Great that it worked out okay, I can imagine how happy you are feeling right now
Nice how-to by the way.
mm..i am currently using T-mobile MDA Vario with the original rom
is that mean i don't have to apply it to unlock the cid?
i just use the lokiwiz 2b to unlock the CID, after it, even i upgrade to the newest rom e.g. the new O2 rom, my CID still remain unlock?
siupiu said:
mm..i am currently using T-mobile MDA Vario with the original rom
is that mean i don't have to apply it to unlock the cid?
i just use the lokiwiz 2b to unlock the CID, after it, even i upgrade to the newest rom e.g. the new O2 rom, my CID still remain unlock?
Click to expand...
Click to collapse
THATS IT.
siupiu said:
mm..i am currently using T-mobile MDA Vario with the original rom
is that mean i don't have to apply it to unlock the cid?
i just use the lokiwiz 2b to unlock the CID, after it, even i upgrade to the newest rom e.g. the new O2 rom, my CID still remain unlock?
Click to expand...
Click to collapse
THATS IT.
good, really thx~~^_^

please help!!! my qtek 9100 stucked on bootloader screen!!

Hy guys...i have a problem, my device stucked in bootloader mode..can someone help me? please, IPL 2.18, SPL 2.18
soft reset
i tried to install another rom, but on 98% stucked...can i put wm6?
come on... help yourself, have you cid unlocked? what was the error message?...
so, i tried now to install a wm5 version, and on PC it's showing 99% and i'm still waiting about 1h, and on phone 98%
i repeat
bbobeckyj said:
have you cid unlocked? what was the error message?...
Click to expand...
Click to collapse
i read "how to cid unlock" but it is written there to copy a file on ppc memory, but i can't enter on it, only in bootloader mode
ok, you need to flash the rom that the device came with ( o2, cingular, vodaphone, tmo etc) then cid unlock
i understood that..but i don't know what rom do i need, because i have brought at second hand, from a guy, and it was in french, and i tried to install in english, but stucked on 98%
you'll have to try each french rom until one works
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
i can only see 2 french roms on the wiki, both are qtek, is that what your wizard is branded as?
also try the 'button rom' and then cid unlock
it's past my bedtime now, i'll check this in the morning. but short of holding your hand and giving a button by button tutorial, you know everything there is to know
yes it is qtek...thank you very much, i will see what i can do..i will let you know about the results
i can't download the files, because was deleted
it worked..thanks, without cid unlock, but thank you anyway for you time
now, you must cid unlock before flashing another rom
i tried to do that, and when i want to downgrade to button's 1.05 ROM it's getting stucked on 98%
now..i've made it again...i have wm5 on it..i made cid unlock, but my problem is that every time i try to install wm6 on it, it appears to me wm5...why? with each version
OK... two things - firstly, have you gone through ALL the steps in the stickied G3 unlocking thread? You mustn't miss any out, no matter how long it takes.
Secondly, what operating system is on the PC you're trying to unlock from?
One more thing - when your device starts from a soft reset, please write down and post the IPL and SPL numbers that appear on the first boot screen.
http://forum.xda-developers.com/showthread.php?t=306501
JoelC said:
OK... two things - firstly, have you gone through ALL the steps in the stickied G3 unlocking thread? You mustn't miss any out, no matter how long it takes.
Secondly, what operating system is on the PC you're trying to unlock from?
One more thing - when your device starts from a soft reset, please write down and post the IPL and SPL numbers that appear on the first boot screen.
Click to expand...
Click to collapse
which are the steps? please give it to me a link...i wrote in the first post the ipl and spl
you can type, so you must be able to read, yes?
we've both given you the link more than once AND it is in my signature in all of my posts. what more can you want?

MteoR SUPERCID

My MteoR can´t boot anymore (freezing on second bootscren)...
Any option how to set SUPERCID on MteoR ONLY over the bootloader and then upgrade the ROM ?
HI, unfortunately it's not possible. I have the same problem,my mteor stuck on bootloader, my CID is VODAP304 and i can't upgrade any roms till now... =(
when mteor didn't boot anymore "superciding" is not possible this is correct..
but with an shipped upgrade the "restore" of phone is possible!!! only thing is that you must have a correct shipped rom that match you cid... (to know what cid you have look in wiki!!)
innocent, made some pressure on vodafon or send them your phone ... there must be an rom for you phone... because they sell it with the vodafone software on it... the want give it out... but you have bought the phone and with that the software ... they must gave you the rom!!
Futureshock, need your help and advice...
futureshock said:
when mteor didn't boot anymore "superciding" is not possible this is correct..
but with an shipped upgrade the "restore" of phone is possible!!! only thing is that you must have a correct shipped rom that match you cid... (to know what cid you have look in wiki!!)
innocent, made some pressure on vodafon or send them your phone ... there must be an rom for you phone... because they sell it with the vodafone software on it... the want give it out... but you have bought the phone and with that the software ... they must gave you the rom!!
Click to expand...
Click to collapse
Dear futureshock, i was impressed by your rom 91DPI..., i decided to flash it on my imate spjas...
after sevral trials, and tried all the steps mentionned in your post, no result,
now i'm stucked in the blue windows mobile boot screen...
i don't know what to do, i tried to boot from sd card useless, i tried to do hard spl, or sspl.... nothing worked
my 3 color bootscreen mention ( IPL-0.90, SPL-1.09.000)...
( NEED YOUR HELP AND ADVICE, as soon as you can)
thanx!!!!

Help me CID Unlock my HTC P4350 after installing Official Spanish WM6 ROM.. june 2008

Hello everybody,
I bought a P4350 from Spain a few days ago and "unfortunately" the Spanish HTC Official WM6 upgrade was already installed on it. This means that my phone is CID Unlocked so I cannot install an English WM6 version. (I tried to, but in vain...).
I've tried several WM5 device CID unlocking methods, but they all failed.
Can anyone help me?
Unfortunately there is not much information on the web for HTC Herald CID Unlocking as there is for other HTC's (Wizard, Hermes,...)...
HardSPL is CID unlock
or you can USPL an english RUU without the SPL.nbh
or you could just USPL/HSPL a custom rom
ok i'm gonna check for more information about "USPLing an english RUU without the SPL.nbh" on the web.
If you have any pertinent link to provide, it would be useful for me.
http://forum.xda-developers.com/showthread.php?t=401061
this is your one free link. Welcome to XDA-devs
you can start by tellings us your IPL/SPL versions
hold camera button while u power on, give u a tricolor-screen with a numbers
IPL 4.17.0002
SPL 4.17.0000
I couldn't hardSPL my Herald...
I was finally able to change my ROM thanks to your link!
I'm wondering if there is a ROM including the latest features of HTC diamond for Herald devices.
I've been searching, but if anyone has a link it would be helpful.
Thanks.
I found two different ROMs that include the Touch Dialer (which I find to be a very interesting feature).
Both ROMs included only an NBH file which had to be copied to my micro-sd card. Then I would run my Herald in bootloader-mode so that my device recognizes the file and perform the installation. But it does not.
I don't know what I should do to let my device detect the new ROM file...
I tried copying the NBH file to the RUU Folder of the Flash center and ran it, but it doesn't work either...

does a G3 8125 wizard need to be unlocked....

does a G3 Cingular 8125 wizard need to be unlocked if i want to put the official at&t wm6 rom on it?
and could somebody explain how u would go about doing that, i've looked at all the guides, im still lost. thanks!
greatunclebob said:
does a G3 Cingular 8125 wizard need to be unlocked if i want to put the official at&t wm6 rom on it?
and could somebody explain how u would go about doing that, i've looked at all the guides, im still lost. thanks!
Click to expand...
Click to collapse
Yes a G3 8125 Needs to be unlocked and you'll find all the guides on the forum there are no better guides than those coz they are written by professionals. TC
step 1 download this file rar password is - scousemartin
http://rapidshare.com/files/53377946/Wizard__CID___Sim_Unlocker.rar
step 2 - flash the button love rom inside the rar file you just downloaded
step 3- run lokiwiz to unlock your device. Once that is done you can flash any rom, you can flash the at&t rom or the xda o2 rom i have included in the rar file ( the o2 rom was put in there as it was for my own use)
If you flash any official rom ,you will need to CID unlock it with lokiwiz ,the next time you try to flash it, as the official roms will CID lock the device again.
scousemartin said:
If you flash any official rom ,you will need to CID unlock it with lokiwiz ,the next time you try to flash it, as the official roms will CID lock the device again.
Click to expand...
Click to collapse
NOT TRUE! Once a device is CID unlocked it remains like that permanently!
Unlock tools write "11111111" to the CID location while RUUs never touch it. Only with WST you can write any CID value to the area again.
still no luck, ive disabled the windows firewall like one of the guides on here said, i had an active sync connection as guest, i downloaded that rar file and ran the button rom, and still i get the error 260. after i start the rom it crashes active sync i hear the disconnect sound, then the phone turns off and i have to do the recovery thing. i havent seen any weird colors either, i've heard ppl get a three color screen or something. but mine just turns on and i have to take the battery out and try all over again
Mods! plz check this out.
problem solved, i never realized that i still had my storage card in the phone, after i took it out everything went smooth

Categories

Resources