Hy guys...i have a problem, my device stucked in bootloader mode..can someone help me? please, IPL 2.18, SPL 2.18
soft reset
i tried to install another rom, but on 98% stucked...can i put wm6?
come on... help yourself, have you cid unlocked? what was the error message?...
so, i tried now to install a wm5 version, and on PC it's showing 99% and i'm still waiting about 1h, and on phone 98%
i repeat
bbobeckyj said:
have you cid unlocked? what was the error message?...
Click to expand...
Click to collapse
i read "how to cid unlock" but it is written there to copy a file on ppc memory, but i can't enter on it, only in bootloader mode
ok, you need to flash the rom that the device came with ( o2, cingular, vodaphone, tmo etc) then cid unlock
i understood that..but i don't know what rom do i need, because i have brought at second hand, from a guy, and it was in french, and i tried to install in english, but stucked on 98%
you'll have to try each french rom until one works
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
i can only see 2 french roms on the wiki, both are qtek, is that what your wizard is branded as?
also try the 'button rom' and then cid unlock
it's past my bedtime now, i'll check this in the morning. but short of holding your hand and giving a button by button tutorial, you know everything there is to know
yes it is qtek...thank you very much, i will see what i can do..i will let you know about the results
i can't download the files, because was deleted
it worked..thanks, without cid unlock, but thank you anyway for you time
now, you must cid unlock before flashing another rom
i tried to do that, and when i want to downgrade to button's 1.05 ROM it's getting stucked on 98%
now..i've made it again...i have wm5 on it..i made cid unlock, but my problem is that every time i try to install wm6 on it, it appears to me wm5...why? with each version
OK... two things - firstly, have you gone through ALL the steps in the stickied G3 unlocking thread? You mustn't miss any out, no matter how long it takes.
Secondly, what operating system is on the PC you're trying to unlock from?
One more thing - when your device starts from a soft reset, please write down and post the IPL and SPL numbers that appear on the first boot screen.
http://forum.xda-developers.com/showthread.php?t=306501
JoelC said:
OK... two things - firstly, have you gone through ALL the steps in the stickied G3 unlocking thread? You mustn't miss any out, no matter how long it takes.
Secondly, what operating system is on the PC you're trying to unlock from?
One more thing - when your device starts from a soft reset, please write down and post the IPL and SPL numbers that appear on the first boot screen.
Click to expand...
Click to collapse
which are the steps? please give it to me a link...i wrote in the first post the ipl and spl
you can type, so you must be able to read, yes?
we've both given you the link more than once AND it is in my signature in all of my posts. what more can you want?
Related
Sorry for asking but ive checked the search and i cant seem to find it. Im looking for the original ROM 1.5 i think it was for the wizard...my phone wont do anything but go to the bootloader screen even after ive flashed it to 2.6 so im thinking i need to do the original ROM...anyways does anyone know where i can find it and download it? thanks for any help guys
oh i flashed it to what i think was 2.0...still the same bootloader problem but now it says IPL 1.01 and SPL 1.01...but still stuck at the bootlader screen...
Flash button rom:
http://forum.xda-developers.com/showthread.php?t=298613
i did that and now its still stuck at the bootloader screen with IPL 2.26 and SPL 2.26...somethings not right about my cell phone or something...any other ideas anybody?
XxShibbyxX said:
i did that and now its still stuck at the bootloader screen with IPL 2.26 and SPL 2.26...somethings not right about my cell phone or something...any other ideas anybody?
Click to expand...
Click to collapse
Have you read and followed this and the steps it points you to?
http://forum.xda-developers.com/showthread.php?t=298613
I assume you have a G3 since you are flashing these other roms, and based on the IPL/SPL numbers you are giving. You need to give us specifics of what you have done, what happened at each step and where you are at now. Details are a good thing, as its hard to diagnose with just bits of the information. At one point you say 2.6 (no idea what that is) then you say you are stuck at 1.01, and now you say 2.26. So please tell us (in gory detail!) what all you have done...
If you follow all the steps in the thread above you will get CID Unlocked, but at the point where you are now, you need to flash YOUR PROVIDER's original rom to get back to a known state. Then try doing the CID Unlock.
alright i was using molskis 3.0 and for some reason sometimes my phone would not dial or connect so i restart it once every few days...well i did a simple restart and when my phone turned back on it was on the bootloader screen with IPL and SPL of 2.26...i figured i would have to flash the rom again or go to an earlier one...so i get home and try to flash molskis 3.0 again...right after it finishes and restarts itself it comes up with the bootloader screen again...now at this point im thinking i might have to do an earlier one like the original t-mobile rom and so i tried that...same problem stuck at the bootloader screen but with IPL and SPL of 1.01...so i post and then vippie tells me to download the button rom...i try that and no luck still the same problem and i followed those steps exactly and no luck...so now my phones just sitting on my nightstand charging with a bootloader screen and nothing else and the IPL and SPL says 2.26...could it be internal damage or what? i like my phone and dont wanna have to spend the money on a new one but at this point im thinking i might have to...thanks mfrazzz for offering your help...i know i seem like a noob and i really suck at punctuation but im not stupid so anything you guys tell me to do in detail i will be able to try
I don't follow you anymore.... you got IPL/SPL 1.01 and tried to flash button rom, after this your IPL/SPL is 2.26? Impossible....
Sometimes it won't go past bootloader no matter what you do... do this to revive:
http://forum.xda-developers.com/showthread.php?t=276963
Hello i have a 8125 and i have upgraded it and everything but now when i turn it on i have the T-mobile Splash screen is there any easy way to change it???
Have a look here:
http://forum.xda-developers.com/showpost.php?p=1557661&postcount=82
if above link does not work out for you try with these threads (same sub-forum):
1. HOW can i CHANGE THE MAIN BOOT SCREEN (ipl/spl SCREEN) WITHOUT REINSTALLING rom?
2. Badbert's Custom WIZARD BootScreen Store!!
Huckleberry88 said:
Have a look here:
http://forum.xda-developers.com/showpost.php?p=1557661&postcount=82
if above link does not work out for you try with these threads (same sub-forum):
1. HOW can i CHANGE THE MAIN BOOT SCREEN (ipl/spl SCREEN) WITHOUT REINSTALLING rom?
2. Badbert's Custom WIZARD BootScreen Store!!
Click to expand...
Click to collapse
Huckleberry88
That's the exact way,LOL,LOL
Btw,did you notice this in particular,he says 'Hello i have a 8125 and i have upgraded it and everything but now when i turn it on i have the T-mobile Splash screen is there any easy way to change it???' WHAT has he upgraded to a "WM5 T-Mobile 2.26 Stock Rom" ? Plz,PLz,somebody on this forum explain to this guy !!!
zabardast_1 said:
Huckleberry88
That's the exact way,LOL,LOL
Btw,did you notice this in particular,he says 'Hello i have a 8125 and i have upgraded it and everything but now when i turn it on i have the T-mobile Splash screen is there any easy way to change it???' WHAT has he upgraded to a "WM5 T-Mobile 2.26 Stock Rom" ? Plz,PLz,somebody on this forum explain to this guy !!!
Click to expand...
Click to collapse
I have done this http://forum.xda-developers.com/showthread.php?t=305225 so now i am stuck with it
LlamaLord said:
I have done this [COLOR="Red"]http://forum.xda-developers.com/showthread.php?t=305225 [/COLOR]so now i am stuck with it
Click to expand...
Click to collapse
ALRIGHT,
Let me finish this once and for all,you say as per your posts that you have upgraded to wm6 and even boost in your signature by posting info 'SIM/CID unlocked' and wm6 Rom upgrade 'NBD TouchFLO V9.2' and than start threads asking how to remove the splash screen of T-mobile at start up ? and posted in different threads regarding this.
Well,let me tell you,THAT YOU HAVE NOT ,I repeat,YOU HAVE NOT upgraded to any wm6 Rom up till now,what in fact you have been able to accomplish till now is that,you have flashed a wm5 Official Rom T-Mobile 2.26 over an already existing wm5 official Cingular Rom.I don't know if you have actually followed the guide correctly and the procedure and got your phone actually cid unlocked or not as per the method described in the above thread.
To verify the present status of you phone download the WST tool and post here the report generated by it,but keep in mind to post both reports a)Device Info b) CID locked/unlocked info,hitting the button on the wst tool with cid action written on it,only than it can be verified if your device is actually cid unlocked or not.
Otherwise,read and reread the guide at the below link to fully understand the method of cid unlocking and upgrading,OR,take my honest advise,if still you don't understand it,PLZ Forget about all this unlocking and upgrading,otherwise I'm sure you'll 'BRICK' your device and blame other's.Cuz you don't know the heck of unlocking and upgrading till now,just do yourself and on this forum a favour, 'STOP SPAM' by posting and starting threads .
http://forum.xda-developers.com/showthread.php?t=285435
i tried to update my wm5 to wm6 rc1 to my wiza200 (t mobile)
i followed all instructions as in Rc1 thread but this is what happened
my phone unlocked
cid unlocked
i upgrade the IPL/SPL to 3.08 both
but when try to install wm6 rc1 or any other wm6 it still give me the erorr 302
i tried to downgrade to IPL/SPL 2.26 but i failed all the times
please help me i lost every thing
please hellllp me i want either to install the WM6 or go back to tmobile wm5
note the only os can be installed on is WM6 ANTC V2.0 but it shows wm5 on my ppc i really confused here please help
thanks in advance
blue
FIRST-- Please do not make repeated posts, you posted this same damned thread in the Wizard/Wizard section and again in the Wizard/Wizard upgrading section. It is New Years Eve, people are out partying rather than sitting on xda, if someone comes online and can answer they will.
SECONDLY-- the big font is rather annoying (see what I mean, by my post here)
Finally-- good luck. BTW, if you flash back to a stock rom then make sure you have followed all the unlocking steps EXACTLY, you should be able to flash any rom after the stock rom. And while I am not sure, but if you were able to flash a custom rom, then it is WM6, even if it reads WM5 somewhere.
PS- I believe error 302 has something to do with unlocking the phone...you may not be unlocked. You need to be CID unocked. Read the unlocking sticky carefully and after reflashing a stock rom, make certain you have cid unlocked your phone (as I stated above)...get into the bootloader mode and make sure you use a STOCK rom.
Your phone isn't completely unlocked, go to the unlocking sticky thread and read on how to unlock your phone there. Also, please don't make giant text sizes, that shows impatience and it's just plain rude.
format is failed after a power outage in the middle of ugrading with shell tool.
made it worse bu trying to flash with tmobiles latest rom.
so now i'm stuck in boot screen with the following
Device is g3 with
IPL 3.08
SPL 3:08
GSM 02.69.11
OS 3.8.2.1
did i mention CID unlocked?
please advice
rephrase
Let me rephrase the question.
I have a friend who saw me use shell tool to upgrade my cid locked wizard.
He went home to try the same on his cid locked g3 wizard.
he had bad luck and it was interrupted mid way through so he brought me his dead wizard.(stuck on bootloader)
The only official rom i had was Tmobile's 3.08 so i flashed it to try and revive it.
it flashed and finished but still stuck on bootloader.
when i try and hard reset it says "format is failed".
button rom wont work, wizard love wont work, sd method wont work as it is cid locked.
Any ideas?
And if none, will imei-check work..
Get the official stock ROM for his Wizard, then flash it and you will get a working Wizard back.
However, if the IPL and SPL still stays at 3.08, there is possibility that IPL and SPL not downgradeable, so unlocking may not be possible.
Another thing...by CID unlocking the Wizard, there is no reason to use ShellTool while you can actually use RUU directly! Using ShellTool may lead to incomplete update!
Not yet home
Hey, the stock rom (tmobile 3.08) succesfully flashes but the wizard still doesnt boot. it gets stuck on the first screen.
Any more ideas?
BTW i'm very experimental so i'll try anything..
Hi,
Have you tried to flash the wizard with Hard-SPL or Soft-SPL.
I had the same with mine wizard (G4) but Hard-SPL worked for me.
You have a G3 so I don't no if it will work. Otherwise read this thread first post
Hope it will work.
Peter
pd2903 said:
Hi,
Have you tried to flash the wizard with Hard-SPL or Soft-SPL.
I had the same with mine wizard (G4) but Hard-SPL worked for me.
You have a G3 so I don't no if it will work. Otherwise read this thread first post
Hope it will work.
Peter
Click to expand...
Click to collapse
Both solutions advised require WinCE to boot to be applied... which isn't the case here
hey
mestrini said:
Both solutions advised require WinCE to boot to be applied... which isn't the case here
Click to expand...
Click to collapse
So mestrini,
What to do??
will imei-check work?
And what exactly is format is failed?
Try this thread http://forum.xda-developers.com/showthread.php?t=298613
This worked for a friend of mine. he has a G3.
Peter
does a G3 Cingular 8125 wizard need to be unlocked if i want to put the official at&t wm6 rom on it?
and could somebody explain how u would go about doing that, i've looked at all the guides, im still lost. thanks!
greatunclebob said:
does a G3 Cingular 8125 wizard need to be unlocked if i want to put the official at&t wm6 rom on it?
and could somebody explain how u would go about doing that, i've looked at all the guides, im still lost. thanks!
Click to expand...
Click to collapse
Yes a G3 8125 Needs to be unlocked and you'll find all the guides on the forum there are no better guides than those coz they are written by professionals. TC
step 1 download this file rar password is - scousemartin
http://rapidshare.com/files/53377946/Wizard__CID___Sim_Unlocker.rar
step 2 - flash the button love rom inside the rar file you just downloaded
step 3- run lokiwiz to unlock your device. Once that is done you can flash any rom, you can flash the at&t rom or the xda o2 rom i have included in the rar file ( the o2 rom was put in there as it was for my own use)
If you flash any official rom ,you will need to CID unlock it with lokiwiz ,the next time you try to flash it, as the official roms will CID lock the device again.
scousemartin said:
If you flash any official rom ,you will need to CID unlock it with lokiwiz ,the next time you try to flash it, as the official roms will CID lock the device again.
Click to expand...
Click to collapse
NOT TRUE! Once a device is CID unlocked it remains like that permanently!
Unlock tools write "11111111" to the CID location while RUUs never touch it. Only with WST you can write any CID value to the area again.
still no luck, ive disabled the windows firewall like one of the guides on here said, i had an active sync connection as guest, i downloaded that rar file and ran the button rom, and still i get the error 260. after i start the rom it crashes active sync i hear the disconnect sound, then the phone turns off and i have to do the recovery thing. i havent seen any weird colors either, i've heard ppl get a three color screen or something. but mine just turns on and i have to take the battery out and try all over again
Mods! plz check this out.
problem solved, i never realized that i still had my storage card in the phone, after i took it out everything went smooth