please help me - 8125, K-JAM, P4300, MDA Vario Software Upgrading

i tried to update my wm5 to wm6 rc1 to my wiza200 (t mobile)
i followed all instructions as in Rc1 thread but this is what happened
my phone unlocked
cid unlocked
i upgrade the IPL/SPL to 3.08 both
but when try to install wm6 rc1 or any other wm6 it still give me the erorr 302
i tried to downgrade to IPL/SPL 2.26 but i failed all the times
please help me i lost every thing
please hellllp me i want either to install the WM6 or go back to tmobile wm5
note the only os can be installed on is WM6 ANTC V2.0 but it shows wm5 on my ppc i really confused here please help
thanks in advance
blue

FIRST-- Please do not make repeated posts, you posted this same damned thread in the Wizard/Wizard section and again in the Wizard/Wizard upgrading section. It is New Years Eve, people are out partying rather than sitting on xda, if someone comes online and can answer they will.
SECONDLY-- the big font is rather annoying (see what I mean, by my post here)
Finally-- good luck. BTW, if you flash back to a stock rom then make sure you have followed all the unlocking steps EXACTLY, you should be able to flash any rom after the stock rom. And while I am not sure, but if you were able to flash a custom rom, then it is WM6, even if it reads WM5 somewhere.
PS- I believe error 302 has something to do with unlocking the phone...you may not be unlocked. You need to be CID unocked. Read the unlocking sticky carefully and after reflashing a stock rom, make certain you have cid unlocked your phone (as I stated above)...get into the bootloader mode and make sure you use a STOCK rom.

Your phone isn't completely unlocked, go to the unlocking sticky thread and read on how to unlock your phone there. Also, please don't make giant text sizes, that shows impatience and it's just plain rude.

Related

HOW TO UPGRADE SPV M3000 (without bricking)

hey folks. i think i need to reflash my spv m3000 because it keeps restarting and the phone is reaaaly sluggish..
IPL 1.09
SPL 1.09
GSM 01.04.10
OS 1.9.1.1
This is what i have got. i have no clue whatsoever if this rom is good or not but it doesn;t seem to do the trick for me..
i have be reading for some weeks but i am still unsure wether my phone is CID locked or not. or what rom should or can i use.
i still don;t understand the G3 G4 difference and why everybody talks about 2.xx spl and ipl and i have 1.09....
could anybody please translate all this technical details into english? i have no intention of bricking the device..so i am folowing the advice in all tutorials "if u n't know what you are doing ..ask first"
i have some more questions:
are the new roms more stable or at least faster? because this one keeps restarting randomly.
cand somebody really give me some step by step information on what i need to do?
how can i back up this original firmware..so if the upgrade doesn't work i would still be able to reflash it back
i am mentioning that the phone was sim locked and i uset lokiwiz tool to unlock it.
ftp://xda:[email protected]_US_226102_22610105_022511_WWE_Ship.exe
I would use this one, it's safe, original.
i would appreciate if you could answer al my q's..i am not ready to flash it without knowing if i am cid ocked and what is that...etc
I thought you mentioned you unlocked it.
The ROM is stable, all the posts like Beta, Unhappyhousewife etc. have thgis one as basis.
About your Backup, to be honest I don't have clue because I never had or wanted to go back.
ok. my main concern is about the 1.xx spl and ipl comaptibility. all i could find aroundhere was said about 2.xx
i am afraid to upgrade untill i know for sure what my 1.xx means in practical terms
did u have 1.xx before upgrading?
I did,yes.
Most of us start with 1.
thanx man. so without sounding stupid i will ask for final instructions.
correct me if i'm wrong.
i will have to cid unlock the devicei first using lokiwiz 2
then i will be able to use the rom u suggested?

Looking for any old TMobile ROMS

Hows it going guys this is my first post....ive had so many problems since switching to cingular with my tmobile MDA its hillarious!...i unlocked the MDA...got it too work with Cingular! I thought everything was perfect untill i realized i couldnt receive any text messages from any other carriers. Meaning if i used my cousins cingular phone to text my phone it would work....if i used my sprint phone...nothing would reach my phone...so i serched n applied all kind of cingular MMS GPRS settings .CAB files still nothing. If i put my SIM into an offical cingular phone the same thing happens...so now im hoping if i put the cingular rom on my phone it will make things better.. I need to downgrade first because every CID tool i use wont work but i found out its because i have 2.25 so basically does anyone have an old 1.XX offical T-Mobile ROM backed up anywhere or know how i can receive all text messages from all carriers?? Thanks
welcome...and in the future if you take a few minutes to read the stickies and wiki, you may very well get your answer.
the following link is to a sticky which links to button's 1.05 rom.
http://forum.xda-developers.com/showthread.php?t=285435
well thanks for the help but when i try installing that rom it locks up at 98% everytime and gives me an error....is this becaise of that CID thing is still locked????
Did you follow that tutorial step by step??? I had no problems with the button rom so I am not sure. I myself followed that tutorial when I recently unlocked my MDA and it went without a hitch...make sure you run lokiwiz twice and button twice. Not sure what else to tell you...sorry.
MCarter418 said:
well thanks for the help but when i try installing that rom it locks up at 98% everytime and gives me an error....is this becaise of that CID thing is still locked????
Click to expand...
Click to collapse
No, the Button rom is for the purpose of unlocking and is a really low IPL/SPL which was before the CID locking stuff was around.
I've read on another post that someone was having problems flashing the button rom like you are, and they were finally able to flash it by changing their radio rom first (I don't know if they had one of the newer radio's or what). Doesn't make sense to me as I've never seen that before, but what they heck, you could try downgrading to like the 2.19 T-Mo UK radio to see if that helps.
Also, have you tried flashing the T-Mobile 2.26 rom to your phone? Since this is an MDA and you are running Cingular 2.25 it sounds to me like you were already CID Unlocked (and you don't have to downgrade again to switch carrier roms, just switch).
It also is best to remove your sd card when doing the downgrading procedure.

please help!!! my qtek 9100 stucked on bootloader screen!!

Hy guys...i have a problem, my device stucked in bootloader mode..can someone help me? please, IPL 2.18, SPL 2.18
soft reset
i tried to install another rom, but on 98% stucked...can i put wm6?
come on... help yourself, have you cid unlocked? what was the error message?...
so, i tried now to install a wm5 version, and on PC it's showing 99% and i'm still waiting about 1h, and on phone 98%
i repeat
bbobeckyj said:
have you cid unlocked? what was the error message?...
Click to expand...
Click to collapse
i read "how to cid unlock" but it is written there to copy a file on ppc memory, but i can't enter on it, only in bootloader mode
ok, you need to flash the rom that the device came with ( o2, cingular, vodaphone, tmo etc) then cid unlock
i understood that..but i don't know what rom do i need, because i have brought at second hand, from a guy, and it was in french, and i tried to install in english, but stucked on 98%
you'll have to try each french rom until one works
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
i can only see 2 french roms on the wiki, both are qtek, is that what your wizard is branded as?
also try the 'button rom' and then cid unlock
it's past my bedtime now, i'll check this in the morning. but short of holding your hand and giving a button by button tutorial, you know everything there is to know
yes it is qtek...thank you very much, i will see what i can do..i will let you know about the results
i can't download the files, because was deleted
it worked..thanks, without cid unlock, but thank you anyway for you time
now, you must cid unlock before flashing another rom
i tried to do that, and when i want to downgrade to button's 1.05 ROM it's getting stucked on 98%
now..i've made it again...i have wm5 on it..i made cid unlock, but my problem is that every time i try to install wm6 on it, it appears to me wm5...why? with each version
OK... two things - firstly, have you gone through ALL the steps in the stickied G3 unlocking thread? You mustn't miss any out, no matter how long it takes.
Secondly, what operating system is on the PC you're trying to unlock from?
One more thing - when your device starts from a soft reset, please write down and post the IPL and SPL numbers that appear on the first boot screen.
http://forum.xda-developers.com/showthread.php?t=306501
JoelC said:
OK... two things - firstly, have you gone through ALL the steps in the stickied G3 unlocking thread? You mustn't miss any out, no matter how long it takes.
Secondly, what operating system is on the PC you're trying to unlock from?
One more thing - when your device starts from a soft reset, please write down and post the IPL and SPL numbers that appear on the first boot screen.
Click to expand...
Click to collapse
which are the steps? please give it to me a link...i wrote in the first post the ipl and spl
you can type, so you must be able to read, yes?
we've both given you the link more than once AND it is in my signature in all of my posts. what more can you want?

qtek 9100 upgrading

I have
ispl v 2.18
gsm 02.07.10
os 2.18.7.4
How can i determine if this rom is cid unloced
there are so many diffrent turitorals but no one of them have refferences to my version of 2.18
i have only been able to determine that it is a g3 hardware
i try flashing it with wizzard love rom but i got an connection error from the flashing software. connection error.
can i use the button rom to cid unlock it. and then flash it with the newest roms avable. will this change the radio rom?
please help a very confused newbee.
It's unlocked if you unlocked it. Read and follow the directions for unlocking a G3.
the problem is that in the turitoral. it tells me to use the love rom not buttons rom. and when i try flashing it with that nothing happens...and i get a connection error in the flashing software. then i think i read in another tuitoral that 2.21 and smaller can not be cid unlocked? I am so confused.
dopus1 said:
the problem is that in the turitoral. it tells me to use the love rom not buttons rom. and when i try flashing it with that nothing happens...and i get a connection error in the flashing software. then i think i read in another tuitoral that 2.21 and smaller can not be cid unlocked? I am so confused.
Click to expand...
Click to collapse
Why would you think that 2.21 and higher would affect you since you are at 2.18? Follow this tutorial. This outstanding tutorial written by Dr.P will get you unlocked IFF you follow ALL the steps in order and completely:
http://forum.xda-developers.com/showthread.php?t=285435
DO NOT SKIP STEPS, DO EVERY SINGLE ONE OF THEM.
Of course you should have already read this entire thread since it is a sticky and is tagged with READ FIRST.

Splash Screen?

Hello i have a 8125 and i have upgraded it and everything but now when i turn it on i have the T-mobile Splash screen is there any easy way to change it???
Have a look here:
http://forum.xda-developers.com/showpost.php?p=1557661&postcount=82
if above link does not work out for you try with these threads (same sub-forum):
1. HOW can i CHANGE THE MAIN BOOT SCREEN (ipl/spl SCREEN) WITHOUT REINSTALLING rom?
2. Badbert's Custom WIZARD BootScreen Store!!
Huckleberry88 said:
Have a look here:
http://forum.xda-developers.com/showpost.php?p=1557661&postcount=82
if above link does not work out for you try with these threads (same sub-forum):
1. HOW can i CHANGE THE MAIN BOOT SCREEN (ipl/spl SCREEN) WITHOUT REINSTALLING rom?
2. Badbert's Custom WIZARD BootScreen Store!!
Click to expand...
Click to collapse
Huckleberry88
That's the exact way,LOL,LOL
Btw,did you notice this in particular,he says 'Hello i have a 8125 and i have upgraded it and everything but now when i turn it on i have the T-mobile Splash screen is there any easy way to change it???' WHAT has he upgraded to a "WM5 T-Mobile 2.26 Stock Rom" ? Plz,PLz,somebody on this forum explain to this guy !!!
zabardast_1 said:
Huckleberry88
That's the exact way,LOL,LOL
Btw,did you notice this in particular,he says 'Hello i have a 8125 and i have upgraded it and everything but now when i turn it on i have the T-mobile Splash screen is there any easy way to change it???' WHAT has he upgraded to a "WM5 T-Mobile 2.26 Stock Rom" ? Plz,PLz,somebody on this forum explain to this guy !!!
Click to expand...
Click to collapse
I have done this http://forum.xda-developers.com/showthread.php?t=305225 so now i am stuck with it
LlamaLord said:
I have done this [COLOR="Red"]http://forum.xda-developers.com/showthread.php?t=305225 [/COLOR]so now i am stuck with it
Click to expand...
Click to collapse
ALRIGHT,
Let me finish this once and for all,you say as per your posts that you have upgraded to wm6 and even boost in your signature by posting info 'SIM/CID unlocked' and wm6 Rom upgrade 'NBD TouchFLO V9.2' and than start threads asking how to remove the splash screen of T-mobile at start up ? and posted in different threads regarding this.
Well,let me tell you,THAT YOU HAVE NOT ,I repeat,YOU HAVE NOT upgraded to any wm6 Rom up till now,what in fact you have been able to accomplish till now is that,you have flashed a wm5 Official Rom T-Mobile 2.26 over an already existing wm5 official Cingular Rom.I don't know if you have actually followed the guide correctly and the procedure and got your phone actually cid unlocked or not as per the method described in the above thread.
To verify the present status of you phone download the WST tool and post here the report generated by it,but keep in mind to post both reports a)Device Info b) CID locked/unlocked info,hitting the button on the wst tool with cid action written on it,only than it can be verified if your device is actually cid unlocked or not.
Otherwise,read and reread the guide at the below link to fully understand the method of cid unlocking and upgrading,OR,take my honest advise,if still you don't understand it,PLZ Forget about all this unlocking and upgrading,otherwise I'm sure you'll 'BRICK' your device and blame other's.Cuz you don't know the heck of unlocking and upgrading till now,just do yourself and on this forum a favour, 'STOP SPAM' by posting and starting threads .
http://forum.xda-developers.com/showthread.php?t=285435

Categories

Resources