Sorry for asking but ive checked the search and i cant seem to find it. Im looking for the original ROM 1.5 i think it was for the wizard...my phone wont do anything but go to the bootloader screen even after ive flashed it to 2.6 so im thinking i need to do the original ROM...anyways does anyone know where i can find it and download it? thanks for any help guys
oh i flashed it to what i think was 2.0...still the same bootloader problem but now it says IPL 1.01 and SPL 1.01...but still stuck at the bootlader screen...
Flash button rom:
http://forum.xda-developers.com/showthread.php?t=298613
i did that and now its still stuck at the bootloader screen with IPL 2.26 and SPL 2.26...somethings not right about my cell phone or something...any other ideas anybody?
XxShibbyxX said:
i did that and now its still stuck at the bootloader screen with IPL 2.26 and SPL 2.26...somethings not right about my cell phone or something...any other ideas anybody?
Click to expand...
Click to collapse
Have you read and followed this and the steps it points you to?
http://forum.xda-developers.com/showthread.php?t=298613
I assume you have a G3 since you are flashing these other roms, and based on the IPL/SPL numbers you are giving. You need to give us specifics of what you have done, what happened at each step and where you are at now. Details are a good thing, as its hard to diagnose with just bits of the information. At one point you say 2.6 (no idea what that is) then you say you are stuck at 1.01, and now you say 2.26. So please tell us (in gory detail!) what all you have done...
If you follow all the steps in the thread above you will get CID Unlocked, but at the point where you are now, you need to flash YOUR PROVIDER's original rom to get back to a known state. Then try doing the CID Unlock.
alright i was using molskis 3.0 and for some reason sometimes my phone would not dial or connect so i restart it once every few days...well i did a simple restart and when my phone turned back on it was on the bootloader screen with IPL and SPL of 2.26...i figured i would have to flash the rom again or go to an earlier one...so i get home and try to flash molskis 3.0 again...right after it finishes and restarts itself it comes up with the bootloader screen again...now at this point im thinking i might have to do an earlier one like the original t-mobile rom and so i tried that...same problem stuck at the bootloader screen but with IPL and SPL of 1.01...so i post and then vippie tells me to download the button rom...i try that and no luck still the same problem and i followed those steps exactly and no luck...so now my phones just sitting on my nightstand charging with a bootloader screen and nothing else and the IPL and SPL says 2.26...could it be internal damage or what? i like my phone and dont wanna have to spend the money on a new one but at this point im thinking i might have to...thanks mfrazzz for offering your help...i know i seem like a noob and i really suck at punctuation but im not stupid so anything you guys tell me to do in detail i will be able to try
I don't follow you anymore.... you got IPL/SPL 1.01 and tried to flash button rom, after this your IPL/SPL is 2.26? Impossible....
Sometimes it won't go past bootloader no matter what you do... do this to revive:
http://forum.xda-developers.com/showthread.php?t=276963
Related
Not sure the history of the device, however it will go to Tri colour screen and allow flashing of certain rom, i.e. the custom get out of jail rom and other - Mr Clean, etc..
however after flashing they boot backup and sit on the boot screen in the case of custom rom, displaying the beer glass?
Err, help.
More
button custom rom
IPL 1.01
SPL 2.24
GSM 01.12.10
OS 1.5.4.2
Thanks.
lokidan said:
button custom rom
IPL 1.01
SPL 2.24
GSM 01.12.10
OS 1.5.4.2
Thanks.
Click to expand...
Click to collapse
If you haven't already, go to the thread for how to CID unlock your phone:
http://forum.xda-developers.com/showthread.php?t=285435
Since your IPL is 1.01, you can start at step 4. The key is that after you run lokiwiz, you need to get your SPL down to 1.x also, so you'll need to flash the Button ROM. A few people have mentioned they have had to flash it a number of times (like up to 8 times) to get both IPL and SPL to go down to 1.x (not sure why, but its happened a few times). AFter you get both IPL and SPL down to 1.x (on only after both are at 1.x) then continue with those instructions to flash an official ROM (the TMobile 2.26 one is linked in that thread and is a preferred one to use no matter what carrier you plan on using). Once that is done you will have a fully functioning phone running the latest official base rom. From there you can flash other custom roms if you so desire.
Good luck!
sorry, I didn't fully think about what your first post is saying. To do what I said above assumes you can use the phone in the current condition, but now I don't think thats the case. You should grab the Button ROM and flash it to see if you can get it to function (just flash it directly at the Boot screen). If that doesn't work, go get the TMobile 2.26 ROM and go ahead and try flashing it. if that doesn't work, then find and flash the Wizard Love rom. After getting one of these to work (and one of them should) then follow the CID Unlock procedure exactly (to downgrade, run lokiwiz, downgrade again, upgrade to 2.x).
further info
Thanks for getting back to me much appreciated.
I was under the impression that lokiwiz will not work unless your machine boots up?
Mine gets stuck on the initial button loading screen (beer glass)???
Will check through your link, i have been doing lots of reading etc, but cant find the definitive answer.
help
ahh, thread cross over
Will try the love rom.
Keep you posted.
Once again thanks.
tried Button Rom
Still stuck on the magic beer glass
5th time or re roming.
Cant get love rom quickly enough.
If you can do Torrents, search for Wizard_Love on PirateBay. Then just use uTorrent or BitComet to pull it. Its seeded and shouldn't take too long.
Hy guys...i have a problem, my device stucked in bootloader mode..can someone help me? please, IPL 2.18, SPL 2.18
soft reset
i tried to install another rom, but on 98% stucked...can i put wm6?
come on... help yourself, have you cid unlocked? what was the error message?...
so, i tried now to install a wm5 version, and on PC it's showing 99% and i'm still waiting about 1h, and on phone 98%
i repeat
bbobeckyj said:
have you cid unlocked? what was the error message?...
Click to expand...
Click to collapse
i read "how to cid unlock" but it is written there to copy a file on ppc memory, but i can't enter on it, only in bootloader mode
ok, you need to flash the rom that the device came with ( o2, cingular, vodaphone, tmo etc) then cid unlock
i understood that..but i don't know what rom do i need, because i have brought at second hand, from a guy, and it was in french, and i tried to install in english, but stucked on 98%
you'll have to try each french rom until one works
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
i can only see 2 french roms on the wiki, both are qtek, is that what your wizard is branded as?
also try the 'button rom' and then cid unlock
it's past my bedtime now, i'll check this in the morning. but short of holding your hand and giving a button by button tutorial, you know everything there is to know
yes it is qtek...thank you very much, i will see what i can do..i will let you know about the results
i can't download the files, because was deleted
it worked..thanks, without cid unlock, but thank you anyway for you time
now, you must cid unlock before flashing another rom
i tried to do that, and when i want to downgrade to button's 1.05 ROM it's getting stucked on 98%
now..i've made it again...i have wm5 on it..i made cid unlock, but my problem is that every time i try to install wm6 on it, it appears to me wm5...why? with each version
OK... two things - firstly, have you gone through ALL the steps in the stickied G3 unlocking thread? You mustn't miss any out, no matter how long it takes.
Secondly, what operating system is on the PC you're trying to unlock from?
One more thing - when your device starts from a soft reset, please write down and post the IPL and SPL numbers that appear on the first boot screen.
http://forum.xda-developers.com/showthread.php?t=306501
JoelC said:
OK... two things - firstly, have you gone through ALL the steps in the stickied G3 unlocking thread? You mustn't miss any out, no matter how long it takes.
Secondly, what operating system is on the PC you're trying to unlock from?
One more thing - when your device starts from a soft reset, please write down and post the IPL and SPL numbers that appear on the first boot screen.
Click to expand...
Click to collapse
which are the steps? please give it to me a link...i wrote in the first post the ipl and spl
you can type, so you must be able to read, yes?
we've both given you the link more than once AND it is in my signature in all of my posts. what more can you want?
Can someone point me to an English version of this? The only one I can find linked on this site is http://rs25.rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar. This is in another language (Italian maybe) and I keep getting a "300" error. Thanks.
sdl said:
Can someone point me to an English version of this? The only one I can find linked on this site is http://rs25.rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar. This is in another language (Italian maybe) and I keep getting a "300" error. Thanks.
Click to expand...
Click to collapse
Are you sure you have a G4 ?
No, I have a G3. But according to "How to flash a new ROM to your Wizard... a little tutorial!" http://forum.xda-developers.com/showthread.php?t=298613, if I have an IPL/SPL of 2.xx, I need the wizard_love rom. Read last sentence of G.2.
I used the button ROM. It brought my IPL down to 1.01, but my SPL is still 2.25. Is that OK to proceed?
Keep reflashing the button ROM until both your IPL and SPL are 1.xx. It may take a few times. I think I've read where it's taken some people as many as 7 or 8 times to get them both down. Be patient and make sure your battery is good and charged and when you get them both down, then run lokiwiz to unlock your phone.
xeno1 said:
Keep reflashing the button ROM until both your IPL and SPL are 1.xx. It may take a few times. I think I've read where it's taken some people as many as 7 or 8 times to get them both down. Be patient and make sure your battery is good and charged and when you get them both down, then run lokiwiz to unlock your phone.
Click to expand...
Click to collapse
After at least 15 flashes with button, still no luck. I started with Cingular 2.25.
The button I am using is CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.
My IPL is down to 1.01, but my SPL is still 2.25. How in the world do I get passed this?
It really sucks when you can't get past the first step .
P.S. Should the SIM be in the unit during the flash? I've tried it both ways.
Not sure if it matters if the sim in is in it or not, but make sure your SD card is out because that causes problems a lot of times. Here, download and try this, it is an IPL/SPL updater only. It has version 1.05 of both which might be able to bring your SPL down so you can unlock your phone.
xeno1 said:
Not sure if it matters if the sim in is in it or not, but make sure your SD card is out because that causes problems a lot of times. Here, download and try this, it is an IPL/SPL updater only. It has version 1.05 of both which might be able to bring your SPL down so you can unlock your phone.
Click to expand...
Click to collapse
Tried it several times. No luck, SPL still stuck at 2.25, but thanks for the help. Anyone else out there with this problem?
That's weird, usually it happens the other way around and people get their IPL stuck at 1.xx when they try to upgrade back to a 2.xx but the SPL upgrades without a problem. Since you already have the button ROM on there, go ahead and try and see if it will CID unlock for you. Run lokiwiz and see if it gives you any errors and if not, download and install Wizard Service Tools on to your computer and then run it and click the CID actions button to see if it tells you that your CID is unlocked. If it does then your safe to start upgrading. For some reason I have a feeling it might just work for you.
same here, got the cingular 8125 and flashed the rom. I can not get the spl down. I have 2.25 as well. ahhh what other rom should be good for a cid unlock
also i am on activesync as "guest" dont know if this matters
ctheodores said:
also i am on activesync as "guest" dont know if this matters
Click to expand...
Click to collapse
That doesn't matter.
Try flashing Tmobile 2.26 then again the 1.05 Button ROM
From what i know the Wizard Love is only for G4 Users. G3 users should flash Tmobile stoc 2.26
not all g3 are the same!!
i have experienced the same with my g3 (IPL/SPL 2.18) when i tryed to downgrade the spl... ipl 1.05 and spl 2.18 still remain... just try to unlock spl with lokiwiz02b and relax... i tried to install tnt 5.0 23 times before i unlocked the spl... just read and apply this : http://forum.xda-developers.com/showthread.php?t=285435
i downgraded and reupgraded my spl locked g3 (qtek 9100) in 45 minutes at the state of art...
-----------------------------------------------
tnx to all people that try and try and try and teach us with his experience...
I have found that the SPL doesn't matter. Go ahead and run lokiwiz and you will be ok.
yeah i got throught just run lokiwiz02b cid unlock and then update to tmo rom
Hi. I was trying to upgrade my phone with a custom ROM (i had no idea what i was doing) I was following this link
http://www.pocketpcaddict.com/forums/software/21202-wm6-touchflo-8125-g3-now-g4.html
all goes well until I click on update. as soon as i click on update my phone turns off and the update process cannot continue. It does not even get a chance to update. can anyone help me. I have NO idea what I am doing and i have NO idea what i am doing wrong. Can anyone tell me what RUU to put on the phone. i have the WWE stock 2.25.11.1. I really need to get my phone fixed.
Please help.
Err.....imma try that rom you posted, and see what happens
edit: It worked for me, i think you probably either didn't unlock your phone or you didn't upgrade to the tmobile 2.26 version first. Or it's either
yeah i got the same problem i happen to me today?>!
the link has a password on it. Mine did this as well
what do u mean by passowrd/ but all i need to do is get both ipl and spl numbers the sam/ i have the ipl but not the spl the same number as the ipl please help/ and my phone wont update the second time i go through button rom thanks
unlocking
If your IPL and SPL nos. don't match u need to downgrade ROM and upgrade all over again.
My phone is stuck in boatloader screen when you try and run a new rom it goes throw the process of installing after it gets to a 100% phone turns off comes back on in boatloder screen but the ipl and spl change anyone ideas how to fix
50 posts
jay05 said:
My phone is stuck in boatloader screen when you try and run a new rom it goes throw the process of installing after it gets to a 100% phone turns off comes back on in boatloder screen but the ipl and spl change anyone ideas how to fix
Click to expand...
Click to collapse
Some xperience huh!
Get your info please
without it we cant do much for you!!!!!!!!1
like my signature...
iplspl unlocked or not
g3 or g4
first rom
wich one you have try to upgrade etc etc
everything you remember and can give us..
Im tired to ask this....
So faster you can get this fastest to found a slution ok? bye.
l
iplspl 2.21 cdi unlocked
g3
was using the octaivoi wm6 rom
have tried using the o2 original roms
the phone just whent into bootloader by its self roms will load but after the 100% phone turns off then comes back on but still in bootloader screens but the ipl and spl will change any ideas
Read on the upgrade forum
jay05 said:
l
iplspl 2.21 cdi unlocked
g3
was using the octaivoi wm6 rom
have tried using the o2 original roms
the phone just whent into bootloader by its self roms will load but after the 100% phone turns off then comes back on but still in bootloader screens but the ipl and spl will change any ideas
Click to expand...
Click to collapse
So its not bricked! you have a hope on your hands.
There is more than one solution to you... read upgrade forum
Moved Thread to Upgrading Where It Belongs.
By Accident I formatted my SD card containing the Originall Suplied Stock Rom.
The Ultimate Life Saver in most Cases.