Hi folks!
Is there some kind of step by step manual how to get to a working solution for the well known BlueAngel Problem with it's headset connections?
I found a thread talking about some registry tweaks, but that only enables the menu option to send the sounds to the headset, but finally doesn't produce any sounds...
What I want to have is the instructions, given by the Navigon Mobile Navigator 5 beeing transferred to a bluetooth device (a parrot free speach device or a logitech headset).
I am already running ROM 1.4 and tried all various BT versions, but nothing worked..
Thanks for your help,
Balu
err.. I am looking for using bluetooth headset to listen mp3 as well, any help and suggestions? :wink:
im trying to figure out how to do that aswell, (listen to media player using bluetooth on my SVP m2000)
me too is there any idea pls
same
You can listen mp3s if your headset supports advanced audio distribution profile and you have PDA2K_BroadcomCorp_BTUpdate.cab installed. But if your "advanced" headset does not support old profiles - you would not be able to use it to listen phone calls.
You CANNOT listen MP3s on normal headsets that support headset and hansdfree profiles. To use these headsets you have to sell PDA2K and buy PDA2.
mamaich said:
You can listen mp3s if your headset supports advanced audio distribution profile and you have PDA2K_BroadcomCorp_BTUpdate.cab installed. But if your "advanced" headset does not support old profiles - you would not be able to use it to listen phone calls.
You CANNOT listen MP3s on normal headsets that support headset and hansdfree profiles. To use these headsets you have to sell PDA2K and buy PDA2.
Click to expand...
Click to collapse
Can you please provide the list of BT headsets (with make / model numbers) that supports this "advanced audio distribution profile"
ht820 does the job!
I have Motorola HT820 on Orange M2000.
The HT820 supports Hands-Free and High Quality Audio profiles and you can playback audio in stereo via the headphones.
I upgraded the BT stack to 3900 and radio to 1.13 and added the extra profiles (instructions are in the Wiki), and it appears to work as both .
When the phone rings, WMP pauses and the left headset button answers the phone. Once you finish the call and hang up, WMP starts playback again.
The only problem that I still have is with intermittent dropout of the High Quality Audio. Anyone got any clues on curing this?
Got mine for around £60 UK sterling.
Is this an hardware limitation? Is this a ROM limitation? BT stack problem?
GSM phone preempting BT handfree?
If not HW, can we expect an upcoming solution to this?
Or, the only "hard" workaround is to plug a BT adapter (like Jabra A210) to redirect mike/spkr, and to desactivate BA BT.
Christmas tree, like.
Re: ht820 does the job!
woodrjh said:
I have Motorola HT820 on Orange M2000.
The HT820 supports Hands-Free and High Quality Audio profiles and you can playback audio in stereo via the headphones.
Click to expand...
Click to collapse
Thanks for the Info.... does the HT850 also supports MP3 playback with BT???????????
have a look at these (even though cant solve the prob on BA)
http://www.itechdynamic.com/html/border22.htm
and this
http://answers.google.com/answers/threadview?id=496339
you might wanna have a look here
http://forum.xda-developers.com/viewtopic.php?p=144425#144425
Registry
Hi again.
So, we didn't really find a solution yet?
I once read something about a little change to the registry, so that a second profile for the normal BT Headset appears.
I searched but I can't find it again.
does anyone know which post I mean?
If so, can you give me a link to that, because I believe that is the right way to solve the problem...
the key is if your source (pda or notebook) is running BT audio gateway. centrino notebooks supports audio gateway. I have a Jabra BT800 and listens to MP3s played from an HP DV1000 notebook but cannot have it working through my XDA II mini (the latter does not support BT audio gateway)
you might find this helpful => http://msdn.microsoft.com/library/d...html/wce50conaudiogatewayregistrysettings.asp
Im looking for some BlueTooth Stereo headphones, that will work with my Sprint PPC 6600. Its BT stack is 1.0 and dosn't have the A2DP profile. Is there a way to update my phone so it will suport the A2DP profile or is there BT Stereo Headphones that don't have the A2DP profile that will work on my phone? Please let me know what update or changes I will need to make. Thx.
Hey!
I bought the Jabra 320s stereo headphones but I can't get it to work with my Vario III for media.
When I pair it up I only have the option to select the 'handsfree' profile. How can I get this to work so I can use the A2DP profile?
The Jabra says it is A2DP and I assume the Vario III is too?
Any help appreciated
Warm Regards
Hey people. Having a bit of a problem here. I've got a single ear bluetooth headset that i'm trying to route audio to.
Telephone calls work fine but I need the ability to route notification / confirmation sounds and raw music streams (basically all audio) to the headset.
I've tried a few solutions (VJvolubilis, bluemusic-etc) but every time I enable the audio gateway, I just get a hissing sound that plays over the headset, while all other sound is routed thru my hima.
I was thinking about configging the headset in the registry to support wireless stereo but wouldn't have a clue what settings to enter.
Could someone provide some advice (or a regkey for wireless stereo) on how I could go about routing all standard audio?
Oh BTW, i've tried the broadcomm stack for hima. Apparently the wavedev.dll file included doesn't know how to either recognise the widcomm stack, or work with it to route audio.
Can someone with a wireless stereo headset post a reg backup of their HKLM/Software/Microsoft/Bluetooth directory?
Also anyone with working streaming standard audio to a single ear BT headset, please post both your audioGW.dll & wavedev.dll from \Windows.
I would think that your BT headset does not support the A2DP proflie and therefore cannot be used to stream BT audio.
My stereo BT headphone works just fine using the MS BT stack since WM 5.0 AKU 2.X
Sascha
SaBo, the headset is NOT a stereo BT headset. It's a single-ear handsfree headset (the apple bluetooth headset to be precise).
I know it WILL work with all routed audio because i've synced it with a friend's HP PDA that had a native BT stack and all audio (including mp3s and notifications) played thru the headset.
I'm not trying to enable A2DP, i'm trying to force the phone to route all audio thru the mono earphone of the headset.
Anyone else have any ideas?
As I know, it's impossible in himalaya because of technical reasons.
NxJay said:
I'm not trying to enable A2DP, i'm trying to force the phone to route all audio thru the mono earphone of the headset.
Click to expand...
Click to collapse
Afaik it's not possible on Himalaya.
You will need an A2DP Headset and it will work.
Sascha
I know for sure it can be done. I had other issue, but that was the point.
you have to change some registrity entry, a don't remeber which, as soon as i find it i'll post it for you.
Here is a hack: try it
http://forum.xda-developers.com/showthread.php?t=257415
http://foro.todopocketpc.com/showthread.php?t=128642
Andur, no luck on those 2 hacks.
Tried em both. Nothing happened.
The second hack, i enabled BTAudioOn.exe. All that happened was a hissing sound (kinda like background noise/static) started to play outta the headset, while all other sound kept playing outta my Hima.
Any other ideas? Or even better, any ways to fix the widcomm stack so i can use that to route audio? This MS stack is so useless.
Hi all
I have O2 XDA IIi and stereo headset Jabra BT3030.
Installed bluetooth drivers: Broadcom 1.0.0.3900
"Hands-free" and "High Quality Audio" profiles are present and i can activate it both. Core Player work correctly, sound is good.
BUT I can't use hands-free (loud sound like the fax sound in headphones)
How I can fix it?
I tested BT3030 on some devices with WM 6.1 - hands-free worked good. So, trouble is not with Jabra.
P.S. Sorry for my bad English (Privet from Russia )