Bluetooth active sync - 8125, K-JAM, P4300, MDA Vario Software Upgrading

I am trying to get active sync to work over my bluetooth connection to my laptop. I have a partnership defined in the phone, serial port, com 6. I can connect to the phone from the laptop via the bluetooth connection manager. However, when I try and "connect via bluetooth" from the phone it tells me no partnership exists that can connect via bluetooth. However, one clearly does. I also try and connect to the phone over bluetooth from my laptop with active sync, and it just says it can't find the phone. ANy suggestions?
Thanks!

You need remove the partenership and re-pair with your PC from within Active Sync (using Connect via BT). You have to let ActiveSync handle the profile thing instead of manually setup COM port. Once you paired this way, you will see an ActiveSync profile listed for your PC on your phone. Don't try to outsmart ActiveSync. It's really dumb and only works according to its way.

Tried it
I tried that and its still not working. Same message from the phone. I dont see anywhere in activesyc though that has profiles. Am I missing something? Do i need a newer version of activesync? (I am running summiters latest rom 2.3 for cingular).

Did you remove profiles from both phone and PC. You don't want to manally set COM port connection. After pairing from ActiveSync, you PC will be listed with an ActiveSync Service option instead of Serial port option.

foxbat121 said:
Did you remove profiles from both phone and PC. You don't want to manally set COM port connection. After pairing from ActiveSync, you PC will be listed with an ActiveSync Service option instead of Serial port option.
Click to expand...
Click to collapse
-- I was running activesync 4.2 beta on my PC. Went down to 4.1 and i'm trying to get it going now.
I did remove it from both PC and phone and it sitll didnt work, but i will try here with 4.1.

foxbat121 said:
Did you remove profiles from both phone and PC. You don't want to manally set COM port connection. After pairing from ActiveSync, you PC will be listed with an ActiveSync Service option instead of Serial port option.
Click to expand...
Click to collapse
Nope. Still not working even with 4.1.

If you go to settings->Connections->Bluetooth->Devices, what are the services listed for your PC?

foxbat121 said:
If you go to settings->Connections->Bluetooth->Devices, what are the services listed for your PC?
Click to expand...
Click to collapse
I got it working. Thanks for your help!

How did you get it working? I'm a new user and I have exactly the same problem. If I go to 'settings->Connections->Bluetooth->Devices' I see that Activesync is checked but handsfree is not checked.

I'm not able to connect, either. I go to connect via BT, setup a new partnership, exit back to activesync, and it still says the same - "cannot find an existing partnership that supports Activesync."

sjm992 said:
How did you get it working? I'm a new user and I have exactly the same problem. If I go to 'settings->Connections->Bluetooth->Devices' I see that Activesync is checked but handsfree is not checked.
Click to expand...
Click to collapse
That is good. Now all you need to do it go to activeSync->menu->Connect via BT. You should see status dialog popup and it starts to connect. Make sure on your PC side, you allow the incoming BT connection and ActiveSync is set to allow connect through the COM port BT activesync is using.

no service on bluetooth, no device found
hi
If I go to 'settings->Connections->Bluetooth->Devices
I see no service.
If I try to pairing through active sync, no device found.
active sync 4.2
wm5 helmy
windows xp mce
panda platinum 2006
windows firewall disabled
thanks
bye

ok, i have the same problem but i dont have active sync as an option
i got hanset, serial port n dialup networking
how do i get active sync as an option?

nevermind
i retraced my steps n undid everything
then followed your steps
thanks a mil

Related

Another Problem: ActiveSync over Bluetooth

I jut encountered another Problem (which is severe in my opinion):
I connot connect to my Notebook over the active Sync Bluetooth Option.
It shows the Notebook, when searchning for it, bit Active Sync 4.0 doesn't seem to give the right service...
I am having this activesync problem also.
I can sync using the cradle. I tried setting up the connect via BT, but the BA is giving me a message : "Cannot find an existing Bluetooth partnership with a PC that supports Activesync. Would you like to set it up now?"
And i believe that i did set it up already.
my phone settings are:
under BT devices on my phone my computer is listed. under com ports i have Incoming com port 8.
my PC settings are
Devices : My phone
Options: all checked
COM ports: COM8 incoming
in MSActive sync 4.0:
connection settings: All checked ..."Allow connections to one of the following: COM8"
still cannot figure out what is wrong.
I am currently using WM5 and Activesync 4
When i was using WM03SE and Activesync 3.8 it was working fine.
same problem here
No way to create a synch connection via bluetooth.
It might be another MS bluetooth bug !
is this really not possible? I think this is a huge problem. Might rollback to 2003 until there is a fix.
ActiveSync w/BT okay here...
I can sync via BT without a problem.... it was a little strange on how the AS connection was created.
Anyway, I made sure my laptop was paired with the SX66. Started ActiveSync on the SX66, an clicked on ActiveSync via Bluetooth in the Menu. A screen popped up saying there were no valid BT connections and took me to the BT manager. I chose my laptop and an "Activesync Connection" was created... On the PC, I made sure to allow the proper COM port in AS (in my case, AS always used Com5 when using WM2003).
I didn't create and Incoming/Outgoing connection prior to the PDA prompting me, also deleted any existing partnerships on PDA and PC.
Sorry for the vagueness, this was one of the first things I tried after upgrading to WM5... I can try to answer any other questions. Good luck!
Just got it to work.
collowed chen's directions sort of.
I deleted existing partnerships on MS Activesync on PC and SX66.
I deleted existing pairing on Bluetooth devices under PC BT icon.
I enabled a comport under Bluetooth Devices/ COMPORTS for incoming.
I re-added the sx66 under bluetooth devices, set pass key, this time on my sx66 it listed "activesync" as one of the services offered.
Acknowledged everything on the SX66.
Then opened Active sync (at this point i still did not add the sx66 to activesync on my PC) on SX66.
Chose connect VIA BT under menu, and woila it asked if i wanted to create a partnership.
Now i am syncing via BT....i guess the difference between WM5 and wm03 is that with 03 i think i had to set it up via the cradle before BT.
does not work
i have tried all steps but it does not work
It depends on the PC's bluetooth stack. Anything else than Widcomm is problematic.

Still haven't found what I am looking for.... (Bluetooth/ActiveSync)

This is quite a common problem, from what I have gathered reading from the web, but haven't found a solution yet.
I could Sync perfectly via Bluetooth using Actve Sync 4.2, but ever since I received a file from another phone via bluetooth Active Sync doesn't show up as an option when I pair my phone with my laptop, hence no Active Sync via Bluetooth.
What could have gone wrong? Anyway of getting my Active Sync to work with the Bluetooth again? I have tried everything possible, hard reset, re-installing Active Sync, re-pairing etc. etc.
Please to help... anyone???
i spent a day trying to connect to activesync using bluetooth, when i finaly manage to do this and disconnect it , next time i spent another couple hours trying to connect it again as it was before ). and i think i realize all specifics of that procedure. ur main goal is to recognise computer paired device as device connected via activesync service and not the "serial port" service on ur PDA.
That I know...
Thanks, for that, but that I know, problem is how to make the PDA realise that my system has Active Synch and not Serial port! Have you managed to find that out? If you have then please let me know. Thanks in advance.
It actually depends on what Bluetooth stack yr LapTop has, Broadcom,BlueSoliel, Toshiba or MS..U need to add a virtual Serial Port..set that serial port in yr Async connections on yr LapTop..then re-do the BT search on yr PDA and now it will show Async service in yr device..
yep, in my case its a toshiba one, and u need to set incoming and outgoing port on computer this way: com6 local client port, com7 local server port. and set activesync on com7, and make a connection on computer with pda on port 6 but do not coennect it, after that make a connection on pda with computer, and try to refresh list of services that computer provides untill "serial port" becomes "activesync", then launch activesync on pda and hit connect via bluetooth option, thats it.
Using MS Bluetooth software.
I am using the Microsoft Bluetooth software and there is only incoming and outgoing. Kept refreshing but only shows 'Serial Port'!
__s said:
yep, in my case its a toshiba one, and u need to set incoming and outgoing port on computer this way: com6 local client port, com7 local server port. and set activesync on com7, and make a connection on computer with pda on port 6 but do not coennect it, after that make a connection on pda with computer, and try to refresh list of services that computer provides untill "serial port" becomes "activesync", then launch activesync on pda and hit connect via bluetooth option, thats it.
Click to expand...
Click to collapse
You are an absolute genius. I would never have thought about the "refresh" on the PDA bluetooth settings. It worked. I had given up previously so many times!!!
Eric
__s said:
yep, in my case its a toshiba one, and u need to set incoming and outgoing port on computer this way: com6 local client port, com7 local server port. and set activesync on com7, and make a connection on computer with pda on port 6 but do not coennect it, after that make a connection on pda with computer, and try to refresh list of services that computer provides untill "serial port" becomes "activesync", then launch activesync on pda and hit connect via bluetooth option, thats it.
Click to expand...
Click to collapse
I tried this port with com5 and com9 instead because 6 and 7 were taken (by what??). But unfortunately it didn't work, kept showing "Serial port" even after many refreshes.
What a nuisance
I had a similar problem. One of the reasons I bought the MDA was to sync wirelessly, and I never got this to reliably work, and wound up using a USB cable. The problem is that if it doesn't work without doing something, it is more trouble than the cable. Here are my notes about making bluetooth work:
A workaround is (i) on the MDA, go into bluetooth settings, open the PC listing and uncheck and then recheck the ActiveSync service, and (ii) shut down ActiveSync and restart it on the PC, using ActiveSyncToggle (Google for it). This program also solves the problem that activesync would start and then report that it couldn't find the bluetooth dongle for the idiotic reason that ActiveSync started before the bluetooth dongle was started. ActiveSync doesn't have an Exit/close button, and ActiveSyncToggle provides it.
Bluetooth&ActiveSync
kull said:
I could Sync perfectly via Bluetooth using Actve Sync 4.2, but ever since I received a file from another phone via bluetooth Active Sync doesn't show up as an option when I pair my phone with my laptop, hence no Active Sync via Bluetooth. What could have gone wrong? Anyway of getting my Active Sync to work with the Bluetooth again? I have tried everything possible, hard reset, re-installing Active Sync, re-pairing etc. etc.
Click to expand...
Click to collapse
It's rather simple. Once you pair PDA & PC with ActiveSync, you got a connection - PDA with PC (ActiveSync) via USB. This you can see in ActiveSync -> Connection Settings - checked box near "Allow USB Connections".
And if you'll pair your PDA with PC by Bluetooth (I have BlueSoleil installed), you'll have a Com port (#7 in my case) applied to your PDA - not in PDA, in PC - so you must sign this port in ActiveSync -> Connection Settings -> check box "Allow connection to one of the followings:", choose right port from the list (#7 in my case), tap "OK" (but not "Connect"!!!) - and then try to refresh BT connection on your PDA - you'll see pretty soon - "connection type - ActiveSync". Then choose "connect via BlueTooth" from your PDA - Voila! Yuo're synchronising via BT!
BUT!!! From now on this silly ActiveSync will mind, that you wish to synchronise ONLY by BT! Look in "Connection Settings" - you'll see that "Allow USB connections" is unchecked! That means, you're not able to connect via USB any more!
So, if you want to connect via USB one thing you must to do - is to check this damn box manually! And you again can synchronise via USB.
And from that on - if you want to synchronise via BT - uncheck this box and check "Allow connection to one of the followings:" and check the propper Com port.
So thats all. Have fun!
Right
rusigor said:
BUT!!! From now on this silly ActiveSync will mind, that you wish to synchronise ONLY by BT! Look in "Connection Settings" - you'll see that "Allow USB connections" is unchecked! That means, you're not able to connect via USB any more!
So, if you want to connect via USB one thing you must to do - is to check this damn box manually! And you again can synchronise via USB.
And from that on - if you want to synchronise via BT - uncheck this box and check "Allow connection to one of the followings:" and check the propper Com port.
Click to expand...
Click to collapse
That is probably the problem for me, I sync with two PCs, so when I got one working, trying to sync with the other would bollix up the first's settings.
I have no experience synchronising with 2 PC's. Suppose, you'll have to pair with both PC's and watch right connection settings every time - is particular PC switched to synchronise by USB or by BT - before trying to synchronise!!!!
Else you'll be forced to delete all synx. settings from you PDA (AS page) every time (IMHO)... and pairing you devices from beginning...
Solution found at last!
This was the solution to MY problem:
Originally Posted by miguelromerom
Found a possible "solution" for some people who have been having problems estabishing a BT AS Partnership with their Universal and a host computer running AS. What I found was you may need to edit the registry to fix the problem. Here's what happened to me yesterday:
Morning: Hard reseted my device and installed all my software apps at my work computer via AS in USB mode as a Guest. Note: I have not set up a partnership with any computer (either USB or BT).
Evening: Got in my truck and paired my JasJar to my BT GPS receiver via a BT Serial Port. Used TomTom and navigated home.
Late Evening: Got home. I wanted to set up a BT AS Partnership first so I went through the procedures of pairing my device and my home computer. And guess what, it didn't work. My JasJar would not see that AS was an available option on my home computer (NOTE: Before Hard Resetting my device in the morning, I had previously established a BT AS Partnership with my JasJar so I know my machine supported that profile). What the @?#~! Ok. I did a search of the word "sync" through the registery. Came up with an interesting issue. Under the registry entry:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Ac tiveSync\
In that directory I saw a folder listed as: 000a3a051d0f (This folder is specific to my device (more below)). I was wondering what this was since I did not have any BT ActiveSync Profiles set up yet. When I looked in it, I realized immediately that this is the Device Profile for my GPS RECEIVER!!!! What the hell was it doing in this directory I asked myself. So I deleted the folder 000a3a051d0f from the directory:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Ac tiveSync\
And guess what? I was able to establish a partnership via BT immediately!!!
Hope this helps anyone else facing similar situation... I guess when I sent something via a Nokia phone it created a key which kept recognising my laptop as having only serial port. Once deleted - pronto my laptop showed up saying it had Active Synch!

Can't bluetooth to PC with Activesync..

Does someone have a guide for connecting via BT and activesync?
I can't for the life of me get my PC to recognize my tilt it just doesn't find the device in order to create an outbound connection, any help here?
TW,
Delete all existing pairings and sync partnerships then follow the Bluetooth activesync help procedure in Activesync. It will set up your bt com ports etc in the right order for you to connect.
Still having some problems...
The device is found in the BT Devices and I was able to add an incoming port com4 but it doesn't find anything to add an outgoing port? shouldn't it have an outgoing port, it just doesn't find the device.
In activesync when I set the port to com4 and try connecting I get nothing even though in the end it shows the port com4 is available.
Any ideas?
i assume you are using XP? and have the latest bt drivers on your pc. From there delete the parings, and then pair from the pc, when you set it up at that point there should be a checkbox for the activesync service on your kaiser (much like it has for earphones). If not make sure that your activesync connection settings have "Allow Connections to the following" and then choose whatever port (i normally do port 4)
yes, Windows XP SP2.
The device gets paired with the desktop, I added a com port this time com5 as "incoming". I then opened ActiveStink and change the "allow connections to one of the following" to com5 and hit "Connect..." and no joy...
I finally get a message that my "device was not detected" and it shows the com5 port available.
TW,
[EDIT]
It was user error, I was trying to initiate the connection from my PC and not my phone... thanks for the help.
no worries. Glad if i was any help

Bluetooth Sync- Please help

Hi all:
After hours of searching and trying, and failing, I have given in, and decided to go ahead and ask. Please be gentle, I know how much everyone hates when people ask already answered questions, but I have honestly spent hours trying to solve this problem.
I am unable to get bluetooth sync to work (Windows XP).
I kept getting too high a COM port number, and was not able to select it on ppc.
After many searches both here and Google, I was finally able to get a COM port which was low enough for my Tilt to recognize (COM port 9). I Added new device to Tilt, and FINALLY I had ActiveSync as an option.
It indicated I should select COM port 9 to sync. I have also gone into my bluetooth place on PC, and verified that it shows COM 9 as My Serial Port. I have also checked, and my PC does show up on ppc bluetooth devices. I have double checked that ppc is discoverable. I also added 9 under COM ports on phone.
However, ActiveSync on PC does not list COM port 9 as an option.
Also, when I try to add Tilt to My bluetooth places (on PC), it tells me no available COM ports on ppc.
If I go to Activesync on phone, and click connect via bluetooth, it says opening port, then connecting to host, and a pop-up on pc states that ppc is connected to blueooth serial port on PC (COM 9). After this, all activity stops, and active sync does not ever connect.
Please help me
Thanks!
You don't need to set a COM port on the PPC itself. Delete it as well as the pairing with your PC.
On the PC, check the Serial Port service is enabled in the BT settings. I'd then make sure the COM port number is between 1-8. Now where this is done depends on the BT software stack you have on the PC, it can be in the BT settings, or you might have to go in the device manager, COM ports, find the Bluetooth COM port and change its number here in the advanced properties.
Open Activesync connection settings, check the COM port tick and select the port in the dropdown. If you can't see the port here and select it it won't work, so theres no chance your current setup will work.
Then on the phone add new device, select the PC, type same passwords on both sides to create the pairing. In the next service window you should have Activesync, tick it, finish. This should now work, at least I've always done that way for years now with different PCs and PPCs. Activesync is crap though, and on some configurations I needed to kill the activesync process and relaunch it everytime before connecting or it wouldn't work, or open the connection settings, remove the COM port tick and dismiss, then open again and put it back.
Also, when you connect on the PPC, some PC bluetooth stacks will ask you everytime if you want to allow the connection, but the prompt doesn't appear unless you go manually click in the BT tray icon. That was on my last PC.
There are often small issues but I always got it to work somehow
Hi:
Thanks so much for your reply.
I deleted the COM port on phone, as you instructed.I also deleted pairing.
I wasn't able to set COM port to a lower number than 9. There was no advanced properties for the COM ports in device manager. I even enabled show hidden devices, and show non present devices. Still nothing. I have no idea what is trying up the lower numbered COM ports.
Somewhere along the line, ActiveSync started showing COM port 9 as an option. After selecting it, it now works perfectly.
I am however mad, and frustrated as I don't know which of the MANY steps I took fixed it. I wish I did, so I could post it here, and hopefully help someone else who is about to pull their hair out trying to get their Kaiser to sync via bluetooth. Not to mention if I ever have to set it up again for myself, I have no clue what got it working
Thanks again for your help!!
In the future:
Turn on bluetooth on phone/PC
Right click 'My Computer'/Manage/Device Manager
Check what COM Port your Bluetooth on PC is using
Start Active Sync/File/Connections/Allow Connections from the following (select COM here)
Hit OK then Sync.
Hi Nufsaid:
Thanks for the steps, but believe me, I had tried that dozens of times. My problem wasn't with setting up pairing or anything like that. All the COM ports assigned to bluetooth were way too high for ppc to recognize. Eventually after much effort I got the serial COM port down to COM port 9 (which the phone now was able to use, before it had been 16, 17, 18). Active Sync refused to recognize that COM port. Anyway (as I mentioned in my previous post), after hours of trying, COM port 9 magically showed up as an option in Active Sync. Sadly I am not sure which of the many steps I took fixed the issue.
Thanks anyway.
cincy1020 said:
Sadly I am not sure which of the many steps I took fixed the issue.
Thanks anyway.
Click to expand...
Click to collapse
Don't worry, the first time I tried to sync a PPC via BT I had the exact same kind of problem and never found out how I got it to work. But since then the steps above have worked well
kilrah said:
Don't worry, the first time I tried to sync a PPC via BT I had the exact same kind of problem and never found out how I got it to work. But since then the steps above have worked well
Click to expand...
Click to collapse
LOL
That is funny, but great to hear!
Thanks!
Okay, this is really becoming RIDICULOUS!
I had it syncing perfectly last night. All I did, was go to bed. Turned off bluetooth on phone, and turned off PC.
Today when I went to sync again, COM port 9 is no longer listed in ActiveSync.
And of course, it will not sync. I have tried everything to get COM post 9 to show up again, and it will not. My bluetooth serial post is still listed as COM port 9, and when I establish a connection, it connects, It just won't connect to ActiveSync. I tried deleting the pairing, and re-pairing, but now ActiveSync is not longer listed as an option on phone after pairing.
Any ideas, or suggestions would REALLY be appreciated. And believe me, I have searched, and searched, and then searched some more, I just can't fix this.
Thanks!
Install another Bluetooth stack (one that works ) on your PC? Widcomm for example
kilrah said:
Install another Bluetooth stack (one that works ) on your PC? Widcomm for example
Click to expand...
Click to collapse
Hi:
Thanks for your reply.
I actually am already using Widcomm. Is it possible Widcomm is not working well with my PC? Should I try another? Any suggestions.
Again, thanks for your help. While I am not new to PCs or PPCs, I am VERY new to bluetooth and all that jazz, lol.
Thanks
EDIT:
Actually, I should have said I have the Widcomm stack installed. I am not however sure how to verify that it is being used.
i once read that it works with BlueSoliel, not Widcomm. Try that. BlueSoliel worked for me, but not Widcomm.
I'm using Widcomm (actually the one that is bundled with my Logitech MX5000 desktop bluetooth keyboard/mouse) and it works perfectly fine. On my laptop I have a Toshiba stack and it works well too. Maybe you have an old version that is bogus? I have had trouble to get the widcomm stack to work at the beginning, Windows default crappy stack would always take the BT hardware over preventing the Widcomm stack from using it.
AthenaLod said:
i once read that it works with BlueSoliel, not Widcomm. Try that. BlueSoliel worked for me, but not Widcomm.
Click to expand...
Click to collapse
Just got a new mini dongle I'm trying to use BlueSoliel, but am having trouble, I can push to my phone, listen to music via stereo bluetooth, but can't serial. BlueSoliel gives an option in tools/configuration/quick connect to assign com ports, but the ones shown won't show on my phone as an outgoing/incoming port...have you figured this out? All I want to do is Activesync via Bluetooth.
You don't need any port to appear on the phone for sync. What matters is the COM port number on the PC. You need to know it, set activesync to use it, then do a pairing preferably from the phone, and select on the phone to use the PC's "ActiveSync" service that should appear in the list if the PC configuration is OK.
Basically there's nothing to configure on the phone. If something's wrong it's 95% chance that it's on the PC.

Activesync over BT

I've spent several hours attempting to get this working, I've even bought two new BT dongles for my computer for testing.
Is it at all possible to get activesync working over BT on the diamond? Can't seem to get the ActiveSync profile offered... Neither on my PC or my phone!
audiophil said:
I've spent several hours attempting to get this working, I've even bought two new BT dongles for my computer for testing.
Is it at all possible to get activesync working over BT on the diamond? Can't seem to get the ActiveSync profile offered... Neither on my PC or my phone!
Click to expand...
Click to collapse
Same happend to me until I found the right settings after that I just get irritated when my cable connection doesn't work, in other words I just use it whitout even nowing what the settings are, maybey I can help you if you tel me your settings and show some screendumps, after that I can show you some screendumps whit a working bluetooth connection.
Ps I am not giving any garanty just want to keep my own bluetooth connection
Willem
It works fine for me with Mobile Device Center. Remember to enable BT connection on desktop Activesync options, or else the profile won't appear when you pair with the phone.
I've never got BT/AS to work either (and I've spent days trying), as you say, I never get offered the AS service.
I did see it *once* on the Diamond when I was trying to connect another service (maybe Obex) but I didn't realise how important that was at the time.
I'm using XP/SP2 with the Toshiba stack but I've tried the BlueSoleil stack also with the same result.
I'm guessing this is a problem with the Diamond as I can happily connect with my Artemis via BT to the same laptop
Mee too, I saw the AS-service ONCE, but never ever again.. .:'( Tried 3 dongles and probably 6 different stack implementations.
I'm using XP as well, are the only success stories related to Vista?
Never seen it.
A bad-developed thing with MS and activesync, too bad.
I don't now how your guys try to connect I just can tell how my connection works flawless.
First of all and most important problem whit me was that I have to use the phone to make the connection and not the pc/notebook offcourse you have to allow active sync to acces your phone, in my case this is is found at file connection and allow conection for a compoort in my case com7, then I switch bluetooth on at my phone (and not try to sync straight away cause this results often in a faillure ) and then connect true bluetooth at my phone using the comand connect true bluetooth at active sync at my phone.
One of the strange things which have to set is "All connections use this connection and there is selected "USB" this maid seems trange but I believe the compoort is a virtual one which is used to connect at USB for that reason you have to add a compoort before making your connection, if done right your Diamond will ask for it as soon as you setup the bluetooth connection, the last thing can be wrong cause I don't remember quite well how I did the setup of that part, just because I never use any other connection anymore seems I mannaged to get it working.
This way I can even use it as a wireless webcam which can make you do funny things, the danger of it is when some good programmer makes a virus which allow to setup that connection remotley, aswell the connection whit pocketcontroller I don't want to think off what would hapen if someone manage to get controll of my phone.
Don't now or this is helpfull if any questions feel free.
Willem
On my diamond the only service I can find on my laptop is:
Serial Port
Wireless Stereo
AS set to use the same port as the incoming port in my bluetooth manager...
If you set COM ports right, you tie Diamond with PC using Diamond's ActiveSync. Start/Programs/ActiveSync, the Menu|Connect via Bluetooth. It should ask you now to make a new connection. Tap yes, it will search for BT devices. Choose your PC. If you did everything all right, now you will be connected.
(this may be obvious but I had some problems at start; I thought you initiate the connection on PC)
kosherpig said:
(this may be obvious but I had some problems at start; I thought you initiate the connection on PC)
Click to expand...
Click to collapse
Yes... But what to do when this fails? Anyone ever encountered the "no activesync profile" problem and actually solved it?
audiophil said:
Yes... But what to do when this fails? Anyone ever encountered the "no activesync profile" problem and actually solved it?
Click to expand...
Click to collapse
I gues if there is no active sync profile yet you have to create one what maid be possible aswell is that your settings under active sync/options at your phone where you must selct the options which you want to be syncted, if nothing is selected there it will make a connection but will not sync.
This worked for me
To Async using MICROSOFT Stack do the following:
a. open Control Panel and open Bluetooth Devices
b. click Add and add your device. go to Options and mark "Allow Bluetooth devices to find this computer" and "Allow Bluetooth Devices to connec to this computer". you can also mark other options as desired.
c. go to COM ports and add an INCOMING port. it will choose a port for you automatically.
d. go to WMDC/Connection Settings and mark "Allow connections to one of the following.." and choose the port you created.
e. go back to Devices and choose your PDA. choose Properties and go to Services. there you should see all services your PDA provides. one of them should be Active Sync Bluetooth Service. mark it and click OK. your comp and PDA should connect and disconnect a few secs later.
f. on your device, open ActiveSync and under Menu choose Connect Via Bluetooth.
I just provide my solution.
I use IVT BlueSoleil to manage my BT dongle. After installed, the BT dongle could be recognized as a COM port on the PC. Check through the PC device manager to know what the port number is, then adapt in Activesync, select "Allow connections to one of the following", select COM7 in my case.
Enable BT on the Diamond to make it visible to PC, after paring the PC with Diamond, Diamond could recognize the PC provides ActiveSync services.
Go to Diamond's ActiveSync, select connect via BT, PC will automatically accept the connection from Diamond.
P.S I am not a native English speaker, I just wonder if I could make you understood.
netmaomao said:
I just provide my solution.
I use IVT BlueSoleil to manage my BT dongle. After installed, the BT dongle could be recognized as a COM port on the PC. Check through the PC device manager to know what the port number is, then adapt in Activesync, select "Allow connections to one of the following", select COM7 in my case.
Enable BT on the Diamond to make it visible to PC, after paring the PC with Diamond, Diamond could recognize the PC provides ActiveSync services.
Go to Diamond's ActiveSync, select connect via BT, PC will automatically accept the connection from Diamond.
P.S I am not a native English speaker, I just wonder if I could make you understood.
Click to expand...
Click to collapse
I think the majority here isn't a native English speaker, this forum isn't a forum about language but about phones and pda's if someone wants to show how good his/here English is they beter look for another forum.
I think this forum is one of a few where the solution which someone offers weights more then the way its sad, unless its offending.
Untill now (I don't now what I am calling over myself now) I never got any critics at my English which is far from perfect the last thing wasn't nescesary to say even a blindone could see it whitout braille.
hays said:
This worked for me
To Async using MICROSOFT Stack do the following:
a. open Control Panel and open Bluetooth Devices
b. click Add and add your device. go to Options and mark "Allow Bluetooth devices to find this computer" and "Allow Bluetooth Devices to connec to this computer". you can also mark other options as desired.
c. go to COM ports and add an INCOMING port. it will choose a port for you automatically.
d. go to WMDC/Connection Settings and mark "Allow connections to one of the following.." and choose the port you created.
e. go back to Devices and choose your PDA. choose Properties and go to Services. there you should see all services your PDA provides. one of them should be Active Sync Bluetooth Service. mark it and click OK. your comp and PDA should connect and disconnect a few secs later.
f. on your device, open ActiveSync and under Menu choose Connect Via Bluetooth.
Click to expand...
Click to collapse
Worked flawlessly for me as well. Thanks.
hays said:
This worked for me
To Async using MICROSOFT Stack do the following:
a. open Control Panel and open Bluetooth Devices
b. click Add and add your device. go to Options and mark "Allow Bluetooth devices to find this computer" and "Allow Bluetooth Devices to connec to this computer". you can also mark other options as desired.
c. go to COM ports and add an INCOMING port. it will choose a port for you automatically.
d. go to WMDC/Connection Settings and mark "Allow connections to one of the following.." and choose the port you created.
e. go back to Devices and choose your PDA. choose Properties and go to Services. there you should see all services your PDA provides. one of them should be Active Sync Bluetooth Service. mark it and click OK. your comp and PDA should connect and disconnect a few secs later.
f. on your device, open ActiveSync and under Menu choose Connect Via Bluetooth.
Click to expand...
Click to collapse
I was able to sync my Diamond using WMDC on vista using these steps, with a few modifications.
I had to leave my WMDC "Connections Settings" pull-down box on "Bluetooth" for it to work for me. I'm using a USB dongle, this may be why.
On step (e), after opening the "Services" tab and unchecking, then rechecking the "Active Sync Bluetooth Service" box and hitting Okay, my device would be listed as "Connected" on the main Devices tab for a few seconds before disconnecting (about 3 seconds). I had to initiate step 4 BEFORE the device disconnected. So basically I had 3 seconds to start the Bluetooth sync to get them talking. Haven't had any problems since!
-Mike
This is what worked for me, when not able to get the active sync profile.
In settings for "USB to PC";
turned off 'enable advanced network functionality'
My PC and my Diamond didnt show me any services. Because of that it says no device is paired when i want to connect, although my PC is paired.
I use XP SP3 and the Windows BT Stack.
xp SP3 is a problem ?
cuz nothing work for me
Doesn't work for me either.
Using Vista64SP2.
It worked before but eventually stopped working now.
I see ActiveSync on the Phone and on the Notebook.
AS tries to establish a connection for some seconds but cant do it.
//edit:
Ooook, after Firmware-Flash of new o2 Germany v2.03.207.2 everything's working again. *strange*

Categories

Resources