I've spent several hours attempting to get this working, I've even bought two new BT dongles for my computer for testing.
Is it at all possible to get activesync working over BT on the diamond? Can't seem to get the ActiveSync profile offered... Neither on my PC or my phone!
audiophil said:
I've spent several hours attempting to get this working, I've even bought two new BT dongles for my computer for testing.
Is it at all possible to get activesync working over BT on the diamond? Can't seem to get the ActiveSync profile offered... Neither on my PC or my phone!
Click to expand...
Click to collapse
Same happend to me until I found the right settings after that I just get irritated when my cable connection doesn't work, in other words I just use it whitout even nowing what the settings are, maybey I can help you if you tel me your settings and show some screendumps, after that I can show you some screendumps whit a working bluetooth connection.
Ps I am not giving any garanty just want to keep my own bluetooth connection
Willem
It works fine for me with Mobile Device Center. Remember to enable BT connection on desktop Activesync options, or else the profile won't appear when you pair with the phone.
I've never got BT/AS to work either (and I've spent days trying), as you say, I never get offered the AS service.
I did see it *once* on the Diamond when I was trying to connect another service (maybe Obex) but I didn't realise how important that was at the time.
I'm using XP/SP2 with the Toshiba stack but I've tried the BlueSoleil stack also with the same result.
I'm guessing this is a problem with the Diamond as I can happily connect with my Artemis via BT to the same laptop
Mee too, I saw the AS-service ONCE, but never ever again.. .:'( Tried 3 dongles and probably 6 different stack implementations.
I'm using XP as well, are the only success stories related to Vista?
Never seen it.
A bad-developed thing with MS and activesync, too bad.
I don't now how your guys try to connect I just can tell how my connection works flawless.
First of all and most important problem whit me was that I have to use the phone to make the connection and not the pc/notebook offcourse you have to allow active sync to acces your phone, in my case this is is found at file connection and allow conection for a compoort in my case com7, then I switch bluetooth on at my phone (and not try to sync straight away cause this results often in a faillure ) and then connect true bluetooth at my phone using the comand connect true bluetooth at active sync at my phone.
One of the strange things which have to set is "All connections use this connection and there is selected "USB" this maid seems trange but I believe the compoort is a virtual one which is used to connect at USB for that reason you have to add a compoort before making your connection, if done right your Diamond will ask for it as soon as you setup the bluetooth connection, the last thing can be wrong cause I don't remember quite well how I did the setup of that part, just because I never use any other connection anymore seems I mannaged to get it working.
This way I can even use it as a wireless webcam which can make you do funny things, the danger of it is when some good programmer makes a virus which allow to setup that connection remotley, aswell the connection whit pocketcontroller I don't want to think off what would hapen if someone manage to get controll of my phone.
Don't now or this is helpfull if any questions feel free.
Willem
On my diamond the only service I can find on my laptop is:
Serial Port
Wireless Stereo
AS set to use the same port as the incoming port in my bluetooth manager...
If you set COM ports right, you tie Diamond with PC using Diamond's ActiveSync. Start/Programs/ActiveSync, the Menu|Connect via Bluetooth. It should ask you now to make a new connection. Tap yes, it will search for BT devices. Choose your PC. If you did everything all right, now you will be connected.
(this may be obvious but I had some problems at start; I thought you initiate the connection on PC)
kosherpig said:
(this may be obvious but I had some problems at start; I thought you initiate the connection on PC)
Click to expand...
Click to collapse
Yes... But what to do when this fails? Anyone ever encountered the "no activesync profile" problem and actually solved it?
audiophil said:
Yes... But what to do when this fails? Anyone ever encountered the "no activesync profile" problem and actually solved it?
Click to expand...
Click to collapse
I gues if there is no active sync profile yet you have to create one what maid be possible aswell is that your settings under active sync/options at your phone where you must selct the options which you want to be syncted, if nothing is selected there it will make a connection but will not sync.
This worked for me
To Async using MICROSOFT Stack do the following:
a. open Control Panel and open Bluetooth Devices
b. click Add and add your device. go to Options and mark "Allow Bluetooth devices to find this computer" and "Allow Bluetooth Devices to connec to this computer". you can also mark other options as desired.
c. go to COM ports and add an INCOMING port. it will choose a port for you automatically.
d. go to WMDC/Connection Settings and mark "Allow connections to one of the following.." and choose the port you created.
e. go back to Devices and choose your PDA. choose Properties and go to Services. there you should see all services your PDA provides. one of them should be Active Sync Bluetooth Service. mark it and click OK. your comp and PDA should connect and disconnect a few secs later.
f. on your device, open ActiveSync and under Menu choose Connect Via Bluetooth.
I just provide my solution.
I use IVT BlueSoleil to manage my BT dongle. After installed, the BT dongle could be recognized as a COM port on the PC. Check through the PC device manager to know what the port number is, then adapt in Activesync, select "Allow connections to one of the following", select COM7 in my case.
Enable BT on the Diamond to make it visible to PC, after paring the PC with Diamond, Diamond could recognize the PC provides ActiveSync services.
Go to Diamond's ActiveSync, select connect via BT, PC will automatically accept the connection from Diamond.
P.S I am not a native English speaker, I just wonder if I could make you understood.
netmaomao said:
I just provide my solution.
I use IVT BlueSoleil to manage my BT dongle. After installed, the BT dongle could be recognized as a COM port on the PC. Check through the PC device manager to know what the port number is, then adapt in Activesync, select "Allow connections to one of the following", select COM7 in my case.
Enable BT on the Diamond to make it visible to PC, after paring the PC with Diamond, Diamond could recognize the PC provides ActiveSync services.
Go to Diamond's ActiveSync, select connect via BT, PC will automatically accept the connection from Diamond.
P.S I am not a native English speaker, I just wonder if I could make you understood.
Click to expand...
Click to collapse
I think the majority here isn't a native English speaker, this forum isn't a forum about language but about phones and pda's if someone wants to show how good his/here English is they beter look for another forum.
I think this forum is one of a few where the solution which someone offers weights more then the way its sad, unless its offending.
Untill now (I don't now what I am calling over myself now) I never got any critics at my English which is far from perfect the last thing wasn't nescesary to say even a blindone could see it whitout braille.
hays said:
This worked for me
To Async using MICROSOFT Stack do the following:
a. open Control Panel and open Bluetooth Devices
b. click Add and add your device. go to Options and mark "Allow Bluetooth devices to find this computer" and "Allow Bluetooth Devices to connec to this computer". you can also mark other options as desired.
c. go to COM ports and add an INCOMING port. it will choose a port for you automatically.
d. go to WMDC/Connection Settings and mark "Allow connections to one of the following.." and choose the port you created.
e. go back to Devices and choose your PDA. choose Properties and go to Services. there you should see all services your PDA provides. one of them should be Active Sync Bluetooth Service. mark it and click OK. your comp and PDA should connect and disconnect a few secs later.
f. on your device, open ActiveSync and under Menu choose Connect Via Bluetooth.
Click to expand...
Click to collapse
Worked flawlessly for me as well. Thanks.
hays said:
This worked for me
To Async using MICROSOFT Stack do the following:
a. open Control Panel and open Bluetooth Devices
b. click Add and add your device. go to Options and mark "Allow Bluetooth devices to find this computer" and "Allow Bluetooth Devices to connec to this computer". you can also mark other options as desired.
c. go to COM ports and add an INCOMING port. it will choose a port for you automatically.
d. go to WMDC/Connection Settings and mark "Allow connections to one of the following.." and choose the port you created.
e. go back to Devices and choose your PDA. choose Properties and go to Services. there you should see all services your PDA provides. one of them should be Active Sync Bluetooth Service. mark it and click OK. your comp and PDA should connect and disconnect a few secs later.
f. on your device, open ActiveSync and under Menu choose Connect Via Bluetooth.
Click to expand...
Click to collapse
I was able to sync my Diamond using WMDC on vista using these steps, with a few modifications.
I had to leave my WMDC "Connections Settings" pull-down box on "Bluetooth" for it to work for me. I'm using a USB dongle, this may be why.
On step (e), after opening the "Services" tab and unchecking, then rechecking the "Active Sync Bluetooth Service" box and hitting Okay, my device would be listed as "Connected" on the main Devices tab for a few seconds before disconnecting (about 3 seconds). I had to initiate step 4 BEFORE the device disconnected. So basically I had 3 seconds to start the Bluetooth sync to get them talking. Haven't had any problems since!
-Mike
This is what worked for me, when not able to get the active sync profile.
In settings for "USB to PC";
turned off 'enable advanced network functionality'
My PC and my Diamond didnt show me any services. Because of that it says no device is paired when i want to connect, although my PC is paired.
I use XP SP3 and the Windows BT Stack.
xp SP3 is a problem ?
cuz nothing work for me
Doesn't work for me either.
Using Vista64SP2.
It worked before but eventually stopped working now.
I see ActiveSync on the Phone and on the Notebook.
AS tries to establish a connection for some seconds but cant do it.
//edit:
Ooook, after Firmware-Flash of new o2 Germany v2.03.207.2 everything's working again. *strange*
Related
I am trying to get active sync to work over my bluetooth connection to my laptop. I have a partnership defined in the phone, serial port, com 6. I can connect to the phone from the laptop via the bluetooth connection manager. However, when I try and "connect via bluetooth" from the phone it tells me no partnership exists that can connect via bluetooth. However, one clearly does. I also try and connect to the phone over bluetooth from my laptop with active sync, and it just says it can't find the phone. ANy suggestions?
Thanks!
You need remove the partenership and re-pair with your PC from within Active Sync (using Connect via BT). You have to let ActiveSync handle the profile thing instead of manually setup COM port. Once you paired this way, you will see an ActiveSync profile listed for your PC on your phone. Don't try to outsmart ActiveSync. It's really dumb and only works according to its way.
Tried it
I tried that and its still not working. Same message from the phone. I dont see anywhere in activesyc though that has profiles. Am I missing something? Do i need a newer version of activesync? (I am running summiters latest rom 2.3 for cingular).
Did you remove profiles from both phone and PC. You don't want to manally set COM port connection. After pairing from ActiveSync, you PC will be listed with an ActiveSync Service option instead of Serial port option.
foxbat121 said:
Did you remove profiles from both phone and PC. You don't want to manally set COM port connection. After pairing from ActiveSync, you PC will be listed with an ActiveSync Service option instead of Serial port option.
Click to expand...
Click to collapse
-- I was running activesync 4.2 beta on my PC. Went down to 4.1 and i'm trying to get it going now.
I did remove it from both PC and phone and it sitll didnt work, but i will try here with 4.1.
foxbat121 said:
Did you remove profiles from both phone and PC. You don't want to manally set COM port connection. After pairing from ActiveSync, you PC will be listed with an ActiveSync Service option instead of Serial port option.
Click to expand...
Click to collapse
Nope. Still not working even with 4.1.
If you go to settings->Connections->Bluetooth->Devices, what are the services listed for your PC?
foxbat121 said:
If you go to settings->Connections->Bluetooth->Devices, what are the services listed for your PC?
Click to expand...
Click to collapse
I got it working. Thanks for your help!
How did you get it working? I'm a new user and I have exactly the same problem. If I go to 'settings->Connections->Bluetooth->Devices' I see that Activesync is checked but handsfree is not checked.
I'm not able to connect, either. I go to connect via BT, setup a new partnership, exit back to activesync, and it still says the same - "cannot find an existing partnership that supports Activesync."
sjm992 said:
How did you get it working? I'm a new user and I have exactly the same problem. If I go to 'settings->Connections->Bluetooth->Devices' I see that Activesync is checked but handsfree is not checked.
Click to expand...
Click to collapse
That is good. Now all you need to do it go to activeSync->menu->Connect via BT. You should see status dialog popup and it starts to connect. Make sure on your PC side, you allow the incoming BT connection and ActiveSync is set to allow connect through the COM port BT activesync is using.
no service on bluetooth, no device found
hi
If I go to 'settings->Connections->Bluetooth->Devices
I see no service.
If I try to pairing through active sync, no device found.
active sync 4.2
wm5 helmy
windows xp mce
panda platinum 2006
windows firewall disabled
thanks
bye
ok, i have the same problem but i dont have active sync as an option
i got hanset, serial port n dialup networking
how do i get active sync as an option?
nevermind
i retraced my steps n undid everything
then followed your steps
thanks a mil
This is quite a common problem, from what I have gathered reading from the web, but haven't found a solution yet.
I could Sync perfectly via Bluetooth using Actve Sync 4.2, but ever since I received a file from another phone via bluetooth Active Sync doesn't show up as an option when I pair my phone with my laptop, hence no Active Sync via Bluetooth.
What could have gone wrong? Anyway of getting my Active Sync to work with the Bluetooth again? I have tried everything possible, hard reset, re-installing Active Sync, re-pairing etc. etc.
Please to help... anyone???
i spent a day trying to connect to activesync using bluetooth, when i finaly manage to do this and disconnect it , next time i spent another couple hours trying to connect it again as it was before ). and i think i realize all specifics of that procedure. ur main goal is to recognise computer paired device as device connected via activesync service and not the "serial port" service on ur PDA.
That I know...
Thanks, for that, but that I know, problem is how to make the PDA realise that my system has Active Synch and not Serial port! Have you managed to find that out? If you have then please let me know. Thanks in advance.
It actually depends on what Bluetooth stack yr LapTop has, Broadcom,BlueSoliel, Toshiba or MS..U need to add a virtual Serial Port..set that serial port in yr Async connections on yr LapTop..then re-do the BT search on yr PDA and now it will show Async service in yr device..
yep, in my case its a toshiba one, and u need to set incoming and outgoing port on computer this way: com6 local client port, com7 local server port. and set activesync on com7, and make a connection on computer with pda on port 6 but do not coennect it, after that make a connection on pda with computer, and try to refresh list of services that computer provides untill "serial port" becomes "activesync", then launch activesync on pda and hit connect via bluetooth option, thats it.
Using MS Bluetooth software.
I am using the Microsoft Bluetooth software and there is only incoming and outgoing. Kept refreshing but only shows 'Serial Port'!
__s said:
yep, in my case its a toshiba one, and u need to set incoming and outgoing port on computer this way: com6 local client port, com7 local server port. and set activesync on com7, and make a connection on computer with pda on port 6 but do not coennect it, after that make a connection on pda with computer, and try to refresh list of services that computer provides untill "serial port" becomes "activesync", then launch activesync on pda and hit connect via bluetooth option, thats it.
Click to expand...
Click to collapse
You are an absolute genius. I would never have thought about the "refresh" on the PDA bluetooth settings. It worked. I had given up previously so many times!!!
Eric
__s said:
yep, in my case its a toshiba one, and u need to set incoming and outgoing port on computer this way: com6 local client port, com7 local server port. and set activesync on com7, and make a connection on computer with pda on port 6 but do not coennect it, after that make a connection on pda with computer, and try to refresh list of services that computer provides untill "serial port" becomes "activesync", then launch activesync on pda and hit connect via bluetooth option, thats it.
Click to expand...
Click to collapse
I tried this port with com5 and com9 instead because 6 and 7 were taken (by what??). But unfortunately it didn't work, kept showing "Serial port" even after many refreshes.
What a nuisance
I had a similar problem. One of the reasons I bought the MDA was to sync wirelessly, and I never got this to reliably work, and wound up using a USB cable. The problem is that if it doesn't work without doing something, it is more trouble than the cable. Here are my notes about making bluetooth work:
A workaround is (i) on the MDA, go into bluetooth settings, open the PC listing and uncheck and then recheck the ActiveSync service, and (ii) shut down ActiveSync and restart it on the PC, using ActiveSyncToggle (Google for it). This program also solves the problem that activesync would start and then report that it couldn't find the bluetooth dongle for the idiotic reason that ActiveSync started before the bluetooth dongle was started. ActiveSync doesn't have an Exit/close button, and ActiveSyncToggle provides it.
Bluetooth&ActiveSync
kull said:
I could Sync perfectly via Bluetooth using Actve Sync 4.2, but ever since I received a file from another phone via bluetooth Active Sync doesn't show up as an option when I pair my phone with my laptop, hence no Active Sync via Bluetooth. What could have gone wrong? Anyway of getting my Active Sync to work with the Bluetooth again? I have tried everything possible, hard reset, re-installing Active Sync, re-pairing etc. etc.
Click to expand...
Click to collapse
It's rather simple. Once you pair PDA & PC with ActiveSync, you got a connection - PDA with PC (ActiveSync) via USB. This you can see in ActiveSync -> Connection Settings - checked box near "Allow USB Connections".
And if you'll pair your PDA with PC by Bluetooth (I have BlueSoleil installed), you'll have a Com port (#7 in my case) applied to your PDA - not in PDA, in PC - so you must sign this port in ActiveSync -> Connection Settings -> check box "Allow connection to one of the followings:", choose right port from the list (#7 in my case), tap "OK" (but not "Connect"!!!) - and then try to refresh BT connection on your PDA - you'll see pretty soon - "connection type - ActiveSync". Then choose "connect via BlueTooth" from your PDA - Voila! Yuo're synchronising via BT!
BUT!!! From now on this silly ActiveSync will mind, that you wish to synchronise ONLY by BT! Look in "Connection Settings" - you'll see that "Allow USB connections" is unchecked! That means, you're not able to connect via USB any more!
So, if you want to connect via USB one thing you must to do - is to check this damn box manually! And you again can synchronise via USB.
And from that on - if you want to synchronise via BT - uncheck this box and check "Allow connection to one of the followings:" and check the propper Com port.
So thats all. Have fun!
Right
rusigor said:
BUT!!! From now on this silly ActiveSync will mind, that you wish to synchronise ONLY by BT! Look in "Connection Settings" - you'll see that "Allow USB connections" is unchecked! That means, you're not able to connect via USB any more!
So, if you want to connect via USB one thing you must to do - is to check this damn box manually! And you again can synchronise via USB.
And from that on - if you want to synchronise via BT - uncheck this box and check "Allow connection to one of the followings:" and check the propper Com port.
Click to expand...
Click to collapse
That is probably the problem for me, I sync with two PCs, so when I got one working, trying to sync with the other would bollix up the first's settings.
I have no experience synchronising with 2 PC's. Suppose, you'll have to pair with both PC's and watch right connection settings every time - is particular PC switched to synchronise by USB or by BT - before trying to synchronise!!!!
Else you'll be forced to delete all synx. settings from you PDA (AS page) every time (IMHO)... and pairing you devices from beginning...
Solution found at last!
This was the solution to MY problem:
Originally Posted by miguelromerom
Found a possible "solution" for some people who have been having problems estabishing a BT AS Partnership with their Universal and a host computer running AS. What I found was you may need to edit the registry to fix the problem. Here's what happened to me yesterday:
Morning: Hard reseted my device and installed all my software apps at my work computer via AS in USB mode as a Guest. Note: I have not set up a partnership with any computer (either USB or BT).
Evening: Got in my truck and paired my JasJar to my BT GPS receiver via a BT Serial Port. Used TomTom and navigated home.
Late Evening: Got home. I wanted to set up a BT AS Partnership first so I went through the procedures of pairing my device and my home computer. And guess what, it didn't work. My JasJar would not see that AS was an available option on my home computer (NOTE: Before Hard Resetting my device in the morning, I had previously established a BT AS Partnership with my JasJar so I know my machine supported that profile). What the @?#~! Ok. I did a search of the word "sync" through the registery. Came up with an interesting issue. Under the registry entry:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Ac tiveSync\
In that directory I saw a folder listed as: 000a3a051d0f (This folder is specific to my device (more below)). I was wondering what this was since I did not have any BT ActiveSync Profiles set up yet. When I looked in it, I realized immediately that this is the Device Profile for my GPS RECEIVER!!!! What the hell was it doing in this directory I asked myself. So I deleted the folder 000a3a051d0f from the directory:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Ac tiveSync\
And guess what? I was able to establish a partnership via BT immediately!!!
Hope this helps anyone else facing similar situation... I guess when I sent something via a Nokia phone it created a key which kept recognising my laptop as having only serial port. Once deleted - pronto my laptop showed up saying it had Active Synch!
Hey everyone!!
Did anyone manage to connect his HTC Wings via Bluetooth to the PC and Sync it with WMDC?
It works with cable but not Bluetooth (BL).
I appreciate comments.
Thanks
A.Bagatov said:
Did anyone manage to connect his HTC Wings via Bluetooth to the PC and Sync it with WMDC?
Click to expand...
Click to collapse
It worked pretty easy on my S730. Make sure you enable BT on the phone and your computer. Pair the PC with the S730 and start ActiveSync on your mobile. Select the option 'Connect via Bluetooth' and that was it (for me).
you seem to be using activesync, however i use windows mobile device center with windows vista x32... so the procedure is different and much more problematic it seems... not just with the s730 but with all wm devices
A.Bagatov said:
you seem to be using activesync, however i use windows mobile device center with windows vista x32... so the procedure is different and much more problematic it seems... not just with the s730 but with all wm devices
Click to expand...
Click to collapse
I use Windows Vista Business (32-bit) and I needed to upgrade Mobile Device Center. It works without any problems afterwards. The only disadvantage is that I need to manually connect on my phone, before it starts synchronizing. I would rather have it syncronized whenever it is near my laptop.
it doesnt work for me. bluetooth is turned on in both devices.
does anyone have any suggestions?
i have the toshiba bluetooth stack software, do you use that too??
I had the same problem. Open you WMDC and go into Mobile Device Settings and select Connection Settings. Under Allow connection to one of the following: change the selection from Bluetooth to COM7.
Then open your device and set up your bluetooth connection again. You should see Activesync now.
You are most likely using the Toshiba Bluetooth Stack instead of WIDCOMM.
IT IS NOT WORKING
AAAAAAAAAHHHHHHHHHHHHHHHHH
this is so STUPID
when i try to set up on my phone then it says "you have no partner for activeysnc, get one?"
i say YES and choose my computer
then i can select a port a one point and i CANT select 7
whats the solution!=?!
From your response I think you are trying to set the COM port on your device but you should be changing it in Windows Mobile Device Center.
I'll go step by step in case I was not clear.
1- Disconnect your Wing from your computer.
2- Open Windows Mobile Device Center
3- The only option should be "Mobile Device Settings"
4- In Mobile Device Settings you should have two option Connection Settings and End a partnership, select Connection Settings.
5- Under the second check box "Allow connection to one of the following" there is a drop-down box which should currently read "Bluetooth". In the drop-down box change that selection to COM7.
Note: If COM7 is not available, then I suggest you uninstall your Bluetooth device drivers and then reinstall them.
6- Close Windows Mobile Device Center
Now return to your device.
Delete any existing Bluetooth connections to your computer. and reestablish your Bluetooth connection. You don't need to change any COM settings on your device. Just establish your connection and you should have the Activesync option once it is reconnected.
This is under the assumption that you are running the Toshiba Bluetooth Stack on your computer. If you are and it doesn't work, I'm all out of ideas.
I should have specified that as of Step 2 above, this is all done on your computer not your smartphone, i.e. HTC Wings.
Your problem with Bluetooth is on the computer not the device, most likely.
this doesnt work... i did all the things like u told me on the computer.
then i go to my phone and try to connect from activesync via bluetooth and it says that no computer with a partnership could be found?? even though i actually made bluetooth partnership with my pc. when i added my pc to my bluetooth devices list on my HTC it told me that my pc supported 2 services: stereo audio and com port. i ticked com port... it doesnt seem to help.
on my pc, when i open the bluetooth stack software from toshiba i can see my phone has a partnership with my pc. but it has a network symbol on it.. is this supposed to be like that? ah this is so frustrating? any suggestions?
The only difference I see between your set up and mine is that I don't have a connection appearing on my computer.
So when you open your Bluetooth Settings on the computer, I don't have a saved connection with my Smartphone. The only place I see a connection between my computer and my device is on the device itself.
So my last suggestion is to delete both connections. The one on your computer and then the one on your device.
Open your device and reestablish a connection from your device to your computer. You will be asked to enter the password on your computer but when you open your Bluetooth Settings, you may not see a saved connection.
Also, go back and make sure that in Windows Mobile Device Centre, the connection is for COM7 and has not reverted back to Bluetooth. What you described has only ever happened on my computer when the connection was not set to COM7.
Something currious happened with my device when I was reestablishing my Bluetooth connection, which may be of interest to you.
I erased my original Bluetooth connection and while reestablishing it my device was also connected to my computer with the USB cable. When I paired the device, there was no option for ActiveSync. I disconnected my device and then started the Bluetooth pairing over and this time ActiveSync was available.
Does this help?
Any of you guys who have sucessfully pairedd WDMC in Vista with S730 over bluetooth use original MS out-of-box bluetooth drivers?
I've only used the Toshiba and Widcomm Bluetooth Stacks and have been able to sync with both on Vista.
dagobert_29 said:
The only difference I see between your set up and mine is that I don't have a connection appearing on my computer.
So when you open your Bluetooth Settings on the computer, I don't have a saved connection with my Smartphone. The only place I see a connection between my computer and my device is on the device itself.
So my last suggestion is to delete both connections. The one on your computer and then the one on your device.
Open your device and reestablish a connection from your device to your computer. You will be asked to enter the password on your computer but when you open your Bluetooth Settings, you may not see a saved connection.
Also, go back and make sure that in Windows Mobile Device Centre, the connection is for COM7 and has not reverted back to Bluetooth. What you described has only ever happened on my computer when the connection was not set to COM7.
Click to expand...
Click to collapse
there is the problem: "You will be asked to enter the password on your computer but when you open your Bluetooth Settings, you may not see a saved connection."
because as soon as i enter the bluetooth password on my phone and computer, there appears a bluetooth connection in the manager from toshiba. this connection has a "network" symbol and the services offered are com port and stereo audio. thats not much is it? and also when i click "connect" an error comes up.. connection couldnt be established or something.
i hate this. how can be a SIMPLE task so problematic?
toshiba drivers are working fine. send and receive works. and my phone is fine too. the wmdc work fine as well via USB. i also installed the wmdc UPDATE..... wtf right?!
Hey A.Bagatov,
I'm at a complete loss to understand why you can't get WMDC to work with your phone over BT. You've done everything I've done but unlike you I was able toe stablish the connection.
The only other thing I can think of is to download the latest BT drivers from Toshiba. But before you install them, make a copy of the TosBtChk.dll file and once you've completed the installation of your new BT drivers, replace the new TosBtChk.dll with the one you saved. This will stop you from receiving the trial period notification.
If that doesn't work, then maybe replace your Toshiba BT stack with the Widcomm stack. You'll need to locate a version compatible with your computer.
i would like to get widcomm and get rid of the problems.
so where can i get the widcomm stack? and how do i figure out if its compatible with my laptop?
its sony vaio
A.Bagatov said:
i would like to get widcomm and get rid of the problems.
so where can i get the widcomm stack? and how do i figure out if its compatible with my laptop?
its sony vaio
Click to expand...
Click to collapse
You have to understand Widcomm is not a free replacement for your MS drivers. Its commercial and it can only be obtained with some BT hardware, not as stanalone product AFAIK. As that, it is a bit complicated to make it work with unsupported device (but quite possible). And where to get it? Generally, if you are able to pirate, you are also able to google.
However, I assume you have legal OS installed on your Sony laptop - why not to tell MS they BT drivers SUCK A BIG TIME? Go tell them its crap that does not EVEN WORK TOGETHER WITH THEIR OWN UTILITIES.
Call 1-800-MSSUCKS
A.Bagatov said:
i would like to get widcomm and get rid of the problems.
so where can i get the widcomm stack? and how do i figure out if its compatible with my laptop?
its sony vaio
Click to expand...
Click to collapse
I've also got a Sony Vaio, SZ45, and on the Notebook Review forum, there is a thread that discusses replacing the Toshiba BT stack with Widcomm, which you can get free of charge. The thread offers a modified file which should be sufficient to enable Widcommon your laptop. Here's a link to the general forum http://forum.notebookreview.com/forumdisplay.php?f=8
mpattonm said:
You have to understand Widcomm is not a free replacement for your MS drivers. Its commercial and it can only be obtained with some BT hardware, not as stanalone product AFAIK. As that, it is a bit complicated to make it work with unsupported device (but quite possible). And where to get it? Generally, if you are able to pirate, you are also able to google.
However, I assume you have legal OS installed on your Sony laptop - why not to tell MS they BT drivers SUCK A BIG TIME? Go tell them its crap that does not EVEN WORK TOGETHER WITH THEIR OWN UTILITIES.
Call 1-800-MSSUCKS
Click to expand...
Click to collapse
Microsoft are not the developers of the Widcomm Bluetooth Stack, it's owned by Broadcom. It can be obtained for free, however, you're right in saying it may not work with non-Broadcom hardware. In A.Bagatov's case, the issue is with Toshiba not Microsoft. They are the one's who developed a driver that is not always compatible with non-Toshiba products.
According to other posts I've, the Microsoft generic Bluetooth drivers would appear to work just fine with Windows Mobile devices, however, I was unable to get it working and did not pursue the matter any further once I was able to get the Toshiba BT Stack to function.
I can sympathize with your frustration, but your post does not help him solve his problem.
Hi everybody,
It seems strange ,but after 2 weeks of good job,my Diamond can't sync
with an XP-laptop running Actisync 4.5 using bluetooth!!
My ROM is 1.37 WWE,working fine for all tasks....
Apparently the "ActiveSync service" is no more seen among the services after
pairing with laptop....
Cleared all relationship and rebooted the diamond.....nothing to do.
Other HTC devices (TYTN, Himalaya ,all with Windows mobile 6.1 work fine and syncronize via bluetooth...).
Please help me ..! I do not want hard-reset my diamond
Thanks
Have you updated your Xp to Sp3??
Search for Activesync Windows Sp3 there are several people thats having that issue.
I have had similar problems on both XP and Vista. You could try uninstalling your Bluetooth driver on your PC and rebooting. Your PC should re-install your Bluetooth drivers after reboot. Make sure the partnership is cleared from your handset and try to set up the relationship again.
If you are having the same problem I was having, then this should work for getting the two to talk to each other again. However, in my case, after I rebooted again, I would start getting "Port Not Available" errors on my Diamond.
I ended up installing the BlueSoleil bluetooth drivers on my PC and things are working much better now. If worse comes to worse, you can try them. You can run the trial version forever, but, it is limited to 5 MB transfers per session.
Good luck.
ActiveSync via bluetooth problem ...again
Thanks for all suggestions....
Yes ,i updated my Xp to SP-3,but it seems to be a "Diamond-problem" because if I use another 2 phones (HTC:TYTN-1 and Himalaya,both with Windows mobile 6.1) no problems occur when syncronizing with Xp laptop
via bluetooth........this is a matematically demonstration ,I think.....
Furthermore this problem occured just today ,while XP-SP-3 was installed 2 weeks ago.....
Thanks again
Giuseppe
Perhaps too simple, but did you activate "Transfer" (use to be called "Beam") as well? As being renamed on your Diamond it is easy to overlook.
To Rondol1
Hi Rondol1,
Maybe you mean "receive all beam" -in bluetooth settings....
Yes,sure,but it makes no difference....
Thanks
ActiveSync via bluetooth problem ...again-2
Using PHM_Registry_Editor I took a look inside:
HKLM_Sw_Microsoft_Bluetooth_Device_...._services_0001101-0000-ecc.ecc.
"name": Serial port (instead ActiveSync!) tried to change...but does not fix.
The curious is that "TYTN" -working correctly via Activesync-Bluetooth---
has the same string and values!!!! for all the other variables...
It is a mistery at the moment
Has nobody a solution for this yet?
br
Tomas
Well, I am not certain this will answer the question. But I had the same problem defined here and I overcame it.
1.- I was finally able to pair computer and diamond: start the pairing process from the computer and use a long password like 8 char or more. (I used o use 4 digit one and did not work).
2.- once Paired, go to Activesync in the PC and enable COM port: - "My ActiveSync" must be listed and enabled in the PC BT devices with a COM#. -then enable that COM# in the ActiveSync Connection Config
3.- Go to DIAMOND ActiveSync, Menu - Connect via Bluetooth, and the Error Appears, "No activesync Device...", Click Yes and go to COM Ports ... "Click REFRESH" (this was the key hint) and an "Activesync" service should appear from the PC. Select it, and that's it. It worked for me.
Here's a funny troubleshooting tip. Apparently Windows media Player on your pc can interfere with Activesync. make sure its not running in the task manager before trying to sync.
Surur
Thank you cserran1.
I had the same problem and made instruction like you said and it works great http://forum.xda-developers.com/images/smilies/smile.gif
cserran1 said:
Well, I am not certain this will answer the question. But I had the same problem defined here and I overcame it.
1.- I was finally able to pair computer and diamond: start the pairing process from the computer and use a long password like 8 char or more. (I used o use 4 digit one and did not work).
2.- once Paired, go to Activesync in the PC and enable COM port: - "My ActiveSync" must be listed and enabled in the PC BT devices with a COM#. -then enable that COM# in the ActiveSync Connection Config
3.- Go to DIAMOND ActiveSync, Menu - Connect via Bluetooth, and the Error Appears, "No activesync Device...", Click Yes and go to COM Ports ... "Click REFRESH" (this was the key hint) and an "Activesync" service should appear from the PC. Select it, and that's it. It worked for me.
Click to expand...
Click to collapse
You're a star - nothing was working until I tried an 8 digit passcode!
Cant connect bluetooth to diamond
Im having problem when i try to pair my bluetooth device "MSI star key 2" with the Bluesoleil sofware program, whem ive typed in the 4,8, 10 digid passwords i get connected but just after 3 seconds i get disconnected again, can i be sometith with the "com 19" port.
i have tried uninstalling bluesoliel software and diffrent typed of bluetooth dongel but no luck
i have a siemens gigaset SL37 that connects fine with bluetooth and sync with my outlook contacts
Perfect
I have waded my way through multiple threads trying to figure out how to get Bluetooth to work on an XP SP3 PC with BlueSoleil and activesync 4.5 and a HTC Touch Diamond. I ended up catching this suggestion of 8 digit key, and used my phone number (all 11 digits) and that solved it. it now syncs without issues.
Thanks
Only thing working
cserran1 said:
Well, I am not certain this will answer the question. But I had the same problem defined here and I overcame it.
1.- I was finally able to pair computer and diamond: start the pairing process from the computer and use a long password like 8 char or more. (I used o use 4 digit one and did not work).
2.- once Paired, go to Activesync in the PC and enable COM port: - "My ActiveSync" must be listed and enabled in the PC BT devices with a COM#. -then enable that COM# in the ActiveSync Connection Config
3.- Go to DIAMOND ActiveSync, Menu - Connect via Bluetooth, and the Error Appears, "No activesync Device...", Click Yes and go to COM Ports ... "Click REFRESH" (this was the key hint) and an "Activesync" service should appear from the PC. Select it, and that's it. It worked for me.
Click to expand...
Click to collapse
That's the only thing that helped! Don't know the reason, but I know it works.
Thanks a lot.
cserran1 said:
Well, I am not certain this will answer the question. But I had the same problem defined here and I overcame it.
1.- I was finally able to pair computer and diamond: start the pairing process from the computer and use a long password like 8 char or more. (I used o use 4 digit one and did not work).
2.- once Paired, go to Activesync in the PC and enable COM port: - "My ActiveSync" must be listed and enabled in the PC BT devices with a COM#. -then enable that COM# in the ActiveSync Connection Config
3.- Go to DIAMOND ActiveSync, Menu - Connect via Bluetooth, and the Error Appears, "No activesync Device...", Click Yes and go to COM Ports ... "Click REFRESH" (this was the key hint) and an "Activesync" service should appear from the PC. Select it, and that's it. It worked for me.
Click to expand...
Click to collapse
I had exactly the same problem because I used a pass with 4 char. When I put a long pass like 8 char the " Activesync" service appeared from my pc ......amazing !
not a ROM issue
micdoc said:
I had exactly the same problem because I used a pass with 4 char. When I put a long pass like 8 char the " Activesync" service appeared from my pc ......amazing !
Click to expand...
Click to collapse
i just posted a while ago in freya ROM's thread about this bluetooth issue and i chanced this thread. problem solved!
Sorry I really need to ask. I have been trying in vain to bluetooth files from my laptop to my X1 (R3AA). As of now, my phone can send (or beam) files via bluetooth to my laptop, but not receive anything at all.
Unlike my P1i, the Bluetooth services available for the X1 (showing up on my laptop) does not include the "file transfer service" that was used for exploring the phone's memory stick via bluetooth a la all the other six older Sony ericsson phones that I've previously owned...
I've already:
(i) Checked the allowing incoming beams box in "settings"
(ii) Installed Obex Inbox (but I think that simply is to allow incoming bluetooth beams to get stored in your storage card instead of device)
Is there anything else I haven't done? I right click on my laptop the file after pairing with my X1 and when I hit "send via bluetooth", basically nothing happens. Man, even my old t610i didn't have problems with bluetooth receiving...
it works for me bro.
start > settings > bt > mode > check both boxes! > ok
this will make X1 "visible" for your laptop.
BR!
-mattx- said:
Sorry I really need to ask. I have been trying in vain to bluetooth files from my laptop to my X1 (R3AA). As of now, my phone can send (or beam) files via bluetooth to my laptop, but not receive anything at all.
Click to expand...
Click to collapse
Hmmm... my X1 works well too. Do you have a custom ROM? in case, which one?
so, you select the file, send to, X1 and nothing happen on the screen of your laptop? if so, it is a laptop problem, not X1 problem.
If it would have been an X1 problem, you would have seen a progression bar saying "discovering services available on X1" and then disappearing because of your mentioned X1 problem.
I'll be waiting for your answers to help you!
-mattx- said:
Unlike my P1i, the Bluetooth services available for the X1 (showing up on my laptop) does not include the "file transfer service" that was used for exploring the phone's memory stick via bluetooth a la all the other six older Sony ericsson phones that I've previously owned...
Click to expand...
Click to collapse
Not sure about why your bluetooth is not receiving, but you can make your laptop access your memory stick as a normal folder to browse the files.
Follow these steps.
1. Make sure you have activesync installed on your laptop.
2. Go to activesync on your phone and select connect via bluetooth.
This should establish a activesync connection thro bluetooth, similar to what you get thro a USB connection.
bharat4ever said:
Not sure about why your bluetooth is not receiving, but you can make your laptop access your memory stick as a normal folder to browse the files.
Follow these steps.
1. Make sure you have activesync installed on your laptop.
2. Go to activesync on your phone and select connect via bluetooth.
This should establish a activesync connection thro bluetooth, similar to what you get thro a USB connection.
Click to expand...
Click to collapse
Hmm. doesn't work here,
Vista, Windows Mobile Device Center.
Any clue?
hmm, next time you connect your phone thro usb, let it connect completely to windows mobile device center, then go to Mobile device setttings, and click on connection settings.
Make sure the check box "Allow connections from one of the following" is checked, and "Bluetooth" is selected from the list. I hope this works. Fingers crossed.
Hi guys,
Thanks for the replies, which help steer me in the correct direction. It seems Activesync is responsible for "unlocking" the bluetooth functions (I kid you not). Finally solved it. This is how I did it (based on advice given):
1. Checked all boxes in Bluetooth options in settings: visibility/bluetooth on/authentication passkey required
2. X1 was already paired up with my laptop
3. Connected to my laptop via USB and activesync loaded automatically
4. Opened up "My Bluetooth Places", which is the program that comes with installation of the Bluesoleil program on my laptop
5. Heard a beep on my X1 for the first time when I did this (this was the first time I was connected on USB via activesync AND activating bluetooth AND accessing the bluetooth places folder) - I think this was what activated it in the end - sorry if i'm not explaining it too well here, but it did the trick
Note: Not sure if a few more options popped up in "My Bluetooth places" folder I don't recall seeing bluetooth messaging/contacts there previously. My OS is XP home, using the default R3A rom.
6. I could transfer files via bluetooth already from my laptop to X1...
*I still haven't been able to manage to get within the file directory tree using bluetooth, bharat4ever, which program (and bluetooth service) might I ask did you use to do that?*
Additional thingys: I think it's important to use a proper software for bluetooth file transfers - Bluesoleil is much better imo than that standard Widcomm (oldish as well) program that came default with my laptop.
I was also wondering if I could transfer multiple files via bluetooth and seems like resco explorer can do the trick, though folders can't be sent via bluetooth - tho the contents inside them will.