Messaging not opening with button - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Ok here is one for the books.
How come after I reset or power up my 8125 my email button kinda works.
Kinda being that the title bar says comcast or whatever mailbox it is at and I have the "New" and "Menu" soft buttons at the bottom of the screen and they work, BUT no middle of the screen no matter how long I leave it.
BUT if I go to programs and messaging it pops open just fine and then the button works fine ????
I have tried reassiging the button to make sure it knows where it is.
Any ideas and solutions.
I dont think it has anyyhing to do with the ROM its self as it happens with 1.8, Mr. Clean, 2.25.
All I am running as addins is
HanDBase 3.0
Resco Explorer and Reg Edit
eWallet.
PDA Sudoku
All Mobile Mines.
plus the standard Reg tweaks.

I get the very same problem. I am not running any of the applications that you are running, stainlesspc. I've tried turning off Wisbar as well as all of the today plugins, but it does the same thing.

This is an on-going issue with all Roms.. There are several discussions on this especially within the AKU 2.2 & AKU 2.3 Rom threads.
Makes no sense. Messaging always opens okay from the start menu or wotherwise but if the wind is blowing in right direction and a frog farts in the corner then messaging buggers from that button. Other apps work fine through.

Ditto here. When it happens, I can still open it from the start menu.
It seems to happen when the messaging app has been closed. When it's been recently started and I'm sure it's still open, the button usually works fine.

well it is iffy if I kill it in running programs, at best it is slow.
BUt no matter which button it is tied to it still wont start after a reset.

Related

real trouble with smartskey

i've read all the posts about installing and running smartskey, yet continue to have a real problem. i placed the .exe and.ini files in a new folder (smartskey) within the windows directory on my device. when i run it, it appears that everything works fine..hold left key opens start menu and hold right closes running application. after a few minutes, holding left key does not open start menu..i hear the system sound, as if it is starting, yet nothing. in fact, i can't even use the touchscreen to open it..must soft reset. any ideas what could be causing this? could it be that i am using wisbar advance and it opens a cascading menu? seems that would not be the problem as it works fine for a few minutes.
solved
well, after visiting the wisbar forum, I have an answer to my own question. smartskey works fine with wisbar, it just craps out when you close the start menu with the softkey. once you do that, the startmenu will not come back up unless you soft reset.

Need Task Switcher for WM6

Hi all. I am on the hunt for a decent Task Switcher app that will work with WM6.
I used to use Wisbar Lite and loved it but it looks yuck on WM6 as it forces the older (WM5 Close Icon)
What I need is Something that I can launch with a button and will show all the running apps in a pop up window and allow me to switches between them by tapping on an application icon in said pop up window.
And it must not change or add anything to the start bar.
Any ideas?
Thanks
Jules
pBar
have you tried the pBar application that is around on the forums? it's freeware and was based on the old wisbar. seems to work well, but i don't think i am using a full wm6...just the beta ish...or wm5 heavily skinned wm6....
do a search and you're bound to find it...
ZaJules said:
Hi all. I am on the hunt for a decent Task Switcher app that will work with WM6.
I used to use Wisbar Lite and loved it but it looks yuck on WM6 as it forces the older (WM5 Close Icon)
What I need is Something that I can launch with a button and will show all the running apps in a pop up window and allow me to switches between them by tapping on an application icon in said pop up window.
And it must not change or add anything to the start bar.
Any ideas?
Thanks
Jules
Click to expand...
Click to collapse
I'm running a PDAviet WM6, it has this in it's ROM. Tap and hold upper-right corner.
I love it when I can answer my own questions
After searching and using a bunch off apps and not having any luck I just tried Small Menu and It works 100% in WM6.
Meets all my requirements
More news or problems as I find them
Jules
gspocket magic
best app that does all you want
Thanks for the replies.
Vilem. please can you elaborate on that?
I am using Davit ver 3 and have not seen this app.
Sandrobber. Thanks for the file, I have tried the app before but it doesn't match or look good on the stock WM6 start bar. am I missing a setting or something?
So far SmallmenuPlus is the winner for me.
Jules
I have to say, people I know that have been running Crossbow for a few months, have found SmallMenuPlus to be great.
On an unrelated note, I've run SmallMenu pretty much since I got my first WinMob phone, and can highly recommend it. It's not perfect, but it's very useful.
PocketMagic is also a very worth (free) contender.
I don't use Wisbar (resource usage....) so can't comment.
V
Does anyone know a way to exclude some applications (activesync and phone) from smallmenuplus task list?
Killing the phone process during a conversation or closing activesync during a pc sync can be really dangerous/disappointing.
No, I don't think you can, hence my "It's not perfect"
Try writing to the author, he's still active, although the app only seems to get minor updates these days.
V
I've been using Dinar HandySwitcher 2.5 from DinarSoft for a good while now. It has the decided advantage that you can also remove the application from memory, or all applications from memory, right from the main screen. Most times the only way to clear applications is through the start/settings/systems /memory route or a hard power down.
It's not free but it is cheap, easy and effective. Don't know if it runs on W6.
Trying it now.
Works fine in WM6.
Thanks
pocket magic
you can chenge the pictures of the start bar in pocket magis but it takes some enginutity and time. your have to edit the bitmap. Play aroung with it enough and I'm sure you can make it even look loke a vista button
http://homepage3.nifty.com/UK-taniyama/tools/GSPMagicPP.html
@ZaJules,
Which taskswitcher did you settle with in the end for WM6?
Hadn't seen this thread, thanks for bumping it up . So I'm trying SmallMenuPlus and this seems like a really nice (and fast) replacement for Wisbar Lite. The one thing I miss though is there is no soft reset in the menu. I like having that ability to do a soft reset via the menu due to the case I have doesn't have easy access to the reset hole on the side. Anyone know how to add this?
Also, does SmallMenuPlus not close apps when you press the X? Does it just put them in background? Can that be configured?
SKmenu
Skmenu is the one for me. Its not free(for the cascading menu part, which can be deactivated! ), but the taskbar switching works 100% with the demo. I have always used it, its very light, and its accessible 100% of the time= very quick(response speed is the issue i have with the rest of the apps mentioned). Although it doesnt come preconfigured setting it up takes less than a minute, and its easy enough for any level user.
The best solution for me. I also use an Alt-tab application mapped to a hardware button for easy access, like when driving etc...
about taskswicher
sry my poor english
Since 2004 and IPAQ6340 until today wizard/universal/hermes WM6 I have used HaaliTS TaskSwicher-2002.
Lives silently in upper left corner, shows additionally free battery and memory.
Dont needs install, copy exe, make shortcut, all )
Perfect for me and my friends (~25-30 units).
Have tested all here overmentioned progs, but find it best. Small footprint, etc.
regards
And what about this little tool??
http://forum.xda-developers.com/showthread.php?t=302643&highlight=alttab
BTW: I´m using ilauncher and you can put taskmanager to button. Works perfekt in every WM6
papamopps said:
And what about this little tool??
http://forum.xda-developers.com/showthread.php?t=302643&highlight=alttab
Click to expand...
Click to collapse
Exactly what I needed!

Serial Threader Threads Merged Into A Single Thread

so i downloaded the CAB file and installed. but it doesnt appear. i still have the bland home screen. i did a soft reset and nothing. any help?
in my mind i followed the instructions from this link http://www.freewarepocketpc.net/ppc-download-htc-home-plugin-v1-0.html to a "t".
it cant be this simple...
I dont suppose you went to Settings > Personal > Today > Items(tab) and adjusted your settings.
closet410 said:
so i downloaded the CAB file and installed. but it doesnt appear. i still have the bland home screen. i did a soft reset and nothing. any help?
in my mind i followed the instructions from this link http://www.freewarepocketpc.net/ppc-download-htc-home-plugin-v1-0.html to a "t".
Click to expand...
Click to collapse
Connect device to PC. Use Active Sync to move the (unopened/unextracted) CAB file to your device (storage card or if not main memory).
Then on the device use file explorer to find the CAB and tap on it to install it. Choose install to main memory for this CAB.
AND follow above posters advice to ensure the plugin is set to show on the Today Screen.
Mike
not that simple
jymbrittain said:
I dont suppose you went to Settings > Personal > Today > Items(tab) and adjusted your settings.
Click to expand...
Click to collapse
already done that.
ditched the original link and downloaded schen's version on these very forums. so far so good!
look for schen's HTC Home at pocketemu.com. Then download HTC Home Customizer from the same Link and use it to customize your HTC Home.
weather
i know i've seen this question asked elswhere but how do you switch the temperature on the weather to not show celceius?
closet410 said:
i know i've seen this question asked elswhere but how do you switch the temperature on the weather to not show celceius?
Click to expand...
Click to collapse
2 ways
HHC can do it for you under one of its tabs
or
Go to the weather tab on HTC Home, tap on your city name and change it from the Menu option corrosponding to the right soft key.
Play around with it first and see if you can figure things out.
I downloaded the home plug and schen's cab, but the today screen only appears as the HTC home plug should appear. I tried reinstalling the cab file, but nothing changed. I can't find it under settings.
:EDIT:
I'm not even gonna bother deleting my previous post here. That was dumb of me. I thought I was to look around in the settings... Then I checked programs. You may now bash.
Screen not responding to the stylus?
I can not for the life of me get my stylus to work on my tilt. this is my first touch device but im sure its not hard. i can tap the screen and im fine but when i go to use the stylus it wont respond. could i have disabled something by accident?
Have a screen protector??? May need to adjust the sensitivity. Don't have the exact key, but I know it's in several posts. try filtering your search with the term pressure threshold.
No, it happened to me today too
Tilt w/Duttys latest.
I was reading email, when suddenly the touch screen stopped working. I could use the DPad, but no response to touch. Opened and closed the keyboard, still no response. Soft booted and it went back to normal.
I have had it happen 2 or 3 times on my tilt with dutty previous release. Rebooted and it went back to normal.
The problem is usually related to FTouchFlo, a simple soft reset cures the issue. If you don't have FTouchFlo installed, I'm not sure what could be causing it
I can also say that the issue is coming from touchflo. happened to me twice before so i've just disabled touchflo and hasn't happened since.
Me too!!!
closet410 said:
I can not for the life of me get my stylus to work on my tilt. this is my first touch device but im sure its not hard. i can tap the screen and im fine but when i go to use the stylus it wont respond. could i have disabled something by accident?
Click to expand...
Click to collapse
Check out this thread. http://forum.xda-developers.com/showthread.php?t=337979
I did everything in it, but sometimes my screen stops and freezes for a few seconds. Sometimes it gets so bad that it freezes like every 20 or 30 seconds when I am typing something using the stylus. I don't think I have touchflow because I never installed it. I just have the stock HTC rom.
Any ideas greatly appreciated.
fone_fanatic said:
I can also say that the issue is coming from touchflo. happened to me twice before so i've just disabled touchflo and hasn't happened since.
Click to expand...
Click to collapse
same here. i removed touchflo all together
i got it working again. just had to realign the screen.
What we browser are you using?
I have an att tilt so i have internet explorer mobile and im not really feelin it to much. what browser are you guys using?
many people like the latests beta opera mobile

how can i see the uptime of WM?

is there a way that i can see the uptime of my Tytn2?
it looks like my tytn2 is (soft)resetting itself.
i had a few times now that i had to enter my PIN again. So when it happens again i want to look at the uptime.
Does anybody know if this is possible, ether by installing software or by default in Windows Mobile(6.1).
after some more searching i desided to look for a program to display uptime, pitty that windows mobile doesnt have it itself.
I tried 2 programms now, but they both are not giving the correct time after some time.
Till now i tried uptime meter and myuptime.
If anybody knows one that works correct with WM6.1!?
I used this for a long time: http://ae.inc.ru/uptime.php
AEBplus also has a "status" screen that will display it: http://ae.inc.ru/aebplus.php
kilrah said:
I used this for a long time: http://ae.inc.ru/uptime.php
AEBplus also has a "status" screen that will display it: http://ae.inc.ru/aebplus.php
Click to expand...
Click to collapse
I'll check this out too, I'm always curious how long the phone has been up myself. No negative effects from this program I assume?
I wrote a MortScript to record bootup time at startup, but never got around to writing something to then compare current time to the last recorded time to get uptime.
khaytsus said:
No negative effects from this program I assume?
Click to expand...
Click to collapse
Never seen any... I've been using the Uptime plugin since my Wizard days about 3 years ago. Now that I use AEBPlus for my hardware key shortcuts I removed the plugin as it was redundant.
I find the "uptime since last full charge" even more interesting... and it has helped me troubleshoot problems with programs running in the background several times. Look at uptime, put phone in standby, wait 5mins, turn on and check again - uptime should not have changed, or at least a lot less. If it has, some program is preventing the phone from standing by...
At some point I found out S2U2 would cause the phone to log about 2 hours of uptime overnight, at least I could understand why my battery life had gone down and got rid of it...
kilrah said:
Never seen any... I've been using the Uptime plugin since my Wizard days about 3 years ago. Now that I use AEBPlus for my hardware key shortcuts I removed the plugin as it was redundant.
I find the "uptime since last full charge" even more interesting... and it has helped me troubleshoot problems with programs running in the background several times. Look at uptime, put phone in standby, wait 5mins, turn on and check again - uptime should not have changed, or at least a lot less. If it has, some program is preventing the phone from standing by...
At some point I found out S2U2 would cause the phone to log about 2 hours of uptime overnight, at least I could understand why my battery life had gone down and got rid of it...
Click to expand...
Click to collapse
Never used AEBPlus, does that allow you to "pop up" Today plugins at the press of a key? I discovered when I tried to install the program today, it doesn't show up in SPB Pocket Plus, and I have no room on my today screen outside of it. I could maybe do SecondToday, but that seems like a lot for this.. Oh well.
khaytsus said:
Never used AEBPlus, does that allow you to "pop up" Today plugins at the press of a key? I discovered when I tried to install the program today, it doesn't show up in SPB Pocket Plus, and I have no room on my today screen outside of it. I could maybe do SecondToday, but that seems like a lot for this.. Oh well.
Click to expand...
Click to collapse
AEBPlus runs as a program in the background with program setup in start menu\programs, the program allows you to allocate up to 4 programs and functions like up time, backlight etc to hardware buttons, so you can map any program in start menu.
Just an eg as i have set:
Hardware key
Start:
single press: start menu
double press: Total Commander
tripple press: Task Manager
Longpress: Backlight
Internet:
Opera Mini
Opera Mobile
Skyfire
Uptime
Messaging:
Messaging
Mobilepad
galarm
Touch Calendar
OK:
Ok/Close
Wi-Fi
BT on long
PTT:
Taskfacade
Nodata
Sat Nav on long
So i hardly ever have to go anywhere near the Start\Programs group as anything else like Media is Start Menu.
All in all makes phone very user friendly
stylez said:
AEBPlus runs as a program in the background with program setup in start menu\programs, the program allows you to allocate up to 4 programs and functions like up time, backlight etc to hardware buttons, so you can map any program in start menu.
Just an eg as i have set:
Hardware key
Start:
single press: start menu
double press: Total Commander
tripple press: Task Manager
Longpress: Backlight
Internet:
Opera Mini
Opera Mobile
Skyfire
Uptime
Messaging:
Messaging
Mobilepad
galarm
Touch Calendar
OK:
Ok/Close
Wi-Fi
BT on long
PTT:
Taskfacade
Nodata
Sat Nav on long
So i hardly ever have to go anywhere near the Start\Programs group as anything else like Media is Start Menu.
All in all makes phone very user friendly
Click to expand...
Click to collapse
wth, HOW did I miss this program. I used to do exactly this in PalmOS, I think I could triple-load each key, but this you can do four actions per key. Now my problem will be forgetting which is which!
And what's funny is after I got finished setting all the overloaded applications on the buttons, I then realized "oh, this was to get uptime, where is that?" and finally added it to a button too.
Thanks!
khaytsus said:
wth, HOW did I miss this program. I used to do exactly this in PalmOS, I think I could triple-load each key, but this you can do four actions per key. Now my problem will be forgetting which is which!
And what's funny is after I got finished setting all the overloaded applications on the buttons, I then realized "oh, this was to get uptime, where is that?" and finally added it to a button too.
Thanks!
Click to expand...
Click to collapse
Glad you like & got it tweaked, makes me wonder why M$ doesn't make things user friendly in the first place? "we all know the answer to that"
Know what you mean about forgetting, everything has become second nature to me now "mind u found it a test of mem writing it down"
Oh yeah in the install directory is a .cfg file back it up somewhere so if you ever flash again or have to hard-reset you don't have to set everything up again
Read first
little advice for those of you, like me, who like to download and install before reading. do not install the free version of aebplus on your kaiser, program won't work, and you will have to do hard reset to bring back some of your hardware buttons.
You need to use the current version (2.6.6), and simply leave it unregistered. I don't really know why he leaves that 4-year old 1.0.1 version available.
excellent, it works great, thanks.
AE Button Plus is nice, but it just causes problems for me. It's entirely possible that it's a combination of the other programs installed, but I'm having a few issues
Sometimes buttons are being completely ignored, or very slow to respond.
StyleTap doesn't receive remapped button presses at all
Scrolling with the volume button seems to randomly lock up the PPC requiring me to pull the battery (soft reset won't do)
Soft resets in general are very finicky, having to do them multiple times for the phone to finish booting
All of which went away after I uninstalled. Oh well... Maybe there's some alternative program. For now, I'm back to using the Buttons function in SPB Plus which allows me to add "Hold" to each button.
khaytsus said:
AE Button Plus is nice, but it just causes problems for me. It's entirely possible that it's a combination of the other programs installed, but I'm having a few issues
All of which went away after I uninstalled. Oh well... Maybe there's some alternative program. For now, I'm back to using the Buttons function in SPB Plus which allows me to add "Hold" to each button.
Click to expand...
Click to collapse
Strange i imagine it is something else that is affecting AEButton Plus, i'm running M2D the only issue did have was with regards to OK button, wanted to map long press to Wi-fi and double to BT for convienience, but found that Wi-Fi would be very much a pop shot on load but double press and all fine.
(nothing against aebuttonplus here.. but u do have to register it, and its meant to handle button assignments) lets bring this thread back on topic shall we. showing device uptime.
I wrote a mortscript that shows you the current uptime... it does exactly what your looking for without having to install a whole program to do it (assuming you have mortscript installed already)
the link is in my sig. -cope

Opera Closing when holding button 1

Opera auto rotate really annoys me so i disabled it by following instructions
Code:
http://forum.xda-developers.com/showthread.php?t=439136
how ever i sometimes want the screen to rotate and so made a very simple application using basic4ppc to be able to rotate the screen (and adding it to my start menu to simply click to rotate), this worked good so i thought i would make it work when holding button1 (which is normally comms manager but really never use it) - everything worked fine.
i have since reset phone and reinstalled everything back the same way, however now when i hold button1 opera appears to close (or at least go behind tf3d)
any ideas?
larrytango said:
Opera auto rotate really annoys me so i disabled it by following instructions
Code:
http://forum.xda-developers.com/showthread.php?t=439136
how ever i sometimes want the screen to rotate and so made a very simple application using basic4ppc to be able to rotate the screen (and adding it to my start menu to simply click to rotate), this worked good so i thought i would make it work when holding button1 (which is normally comms manager but really never use it) - everything worked fine.
i have since reset phone and reinstalled everything back the same way, however now when i hold button1 opera appears to close (or at least go behind tf3d)
any ideas?
Click to expand...
Click to collapse
when u say button 1 do you mean the home button? if so then obviously it will take you to the tf3d lol
sorry, no button1 is the answer call button.
holding it down rotates my screen when using file explorer etc but in opera it no longer works. it used to work b4 i reset phone and reinstalled everything.

Categories

Resources