Hi I'm a noob here. Everything was working perfectly until today. My screen remains dark after going into sleep mode. I've tried to do a soft reset, and it seems fine when it first turns on. But after a minute of inactivity, it goes into sleep mode and whenever I tap the screen or hit the top power button, it awakens but the screen is very dark. I'm have no idea what happened. Hopefully someone can help. I have an 8125 with the following installed:
2.25 Rom (leaked version)
2.25 Radio
SPB Pocket 3.1
SPB Time 2.0
MS VoiceCommand 1.5
Thanks
Related
Hi,
When I don't use my diamond, after some seconds the screen just gets a bit darker but never disappears. the buttons don't seem to block ether...
In settings/system/advanced I changed first and second item to 30 en 40 seconds...
When I push the on/off button everything seems to be turned off...
What to do?
Thanks
JEPEDEWE said:
Hi,
When I don't use my diamond, after some seconds the screen just gets a bit darker but never disappears. the buttons don't seem to block ether...
In settings/system/advanced I changed first and second item to 30 en 40 seconds...
When I push the on/off button everything seems to be turned off...
What to do?
Thanks
Click to expand...
Click to collapse
So "Turn off device" doesn't work? What ROM are you using?
When I push the on/off button on the upper left edge of the diamond, the screen turns black and all buttons are turned off... just like it should..
I want the same thing to happen after (let's say) 30 seconds..
Now the screen gets a bit more "unclear" but never really trurns off.... (completely black...)
Hop you understand it better now.
Thanks
I think I understand. I'm trying to localize the problem. If, in the Power settings you set Turn off Device to 40s, it should do just that.
If it doesn't, there are two possiblities:
A program you installed won't let the device to turn off.
A bug in the ROM you are using.
Please note that the official ROMs don't have this problem, so if that's your case, perhaps you can give a list of the software you installed to see if we can identify the culprit.
I don't consider a hardware failure, as the hard button seems to be working.
I downloaded the HTC new rom version 1.93.404.1 NLD and installed it (Diamond works much better now)
Installed programms:
Tomtom
Data on the run
Nodata
TF3D config
Total commander
Spb Time
Advanced config
S2P
Sprite backup
That must be all I think
Thanks you for your kind help
Your reply rang a bell!!!
In Spd Timer there is a setting: "No sleep on timers"
It was checked.
I unchecked it and now everything seems to be OK...
I still need to study what the setting itself does
Thanks (helping without knowing it... must be great)
JP
Glad I could point you in the right direction
when htc turn off automaticly for 30s or so does he woke up when i get messege, and does he turns off when i am on browser and if i went somwhere for a 2mins will it turns of although i am in browser?
So I have the new official AT&T WM 6.1 ROM. When I hit the power button most of the time the screen turns on but quickly turns back off. When I hit the power button again it stays on. Anyone know how to fix this?
Same exact thing happes with mine when i take it out of standby with the power button. This never happened with 6.0 and just started with 6.1
Me too. But, does not happen every time.
No clue how to fix it here; just adding my voice to the chorus. I thought it might have been because I finally dropped mine. Now I guess it might be something with the 6.1 AT&T ROM.
Second thought: It's not consistent with mine either. It seems to happen more often when my phone has been "off" (read: in standby) for a while.
Mine seems to be inconsistent and more likely to happen if it has been in standby for a while as well . Does anyone with a tilt with AT&T WM6.1 not have this problem?
This issue was introduced in one of the recent AT&T builds before it became official. There is no known fix right now.
This problem is really annoying. Any fixes yet?
mine is 6.1 and do something like that:
when the phone is on standby, and I press the "power" button so it awakes, the screen turn on, then off and go on again by it self, this happens EVERY time but only when the phone its locked. I try it a few times with the phone unlocked and it didnt happend. By un lock i mean the screen and buttons lock.
Something that I've notice, is than, when my phone was 6.0 and I click the "lock" button, the screen DIMs automaticaly, and since I upgrade it to 6.1 it doesnt dim , I lock it, and the screen stays on and exactly the same brightness. I dont know If I have to setup something on the phone to dim when its locked or what, i just cant find it...
upssssss, 2ble post...
ranger47 said:
So I have the new official AT&T WM 6.1 ROM. When I hit the power button most of the time the screen turns on but quickly turns back off. When I hit the power button again it stays on. Anyone know how to fix this?
Click to expand...
Click to collapse
I upgraded to 6.1 yesterday and have the exact same problem. It is very annoying. I am using the Official 3.28 version of 6.1. I have also tried version 3.34 but still get the problem.
still no solutions?
Was using Dutty's latest Kaiser ROM, had a problem with it after installation: when pushing the power button on the side to sleep the phone the light would turn off for about 2 seconds, then the phone would wake back up. The only way it would turn off the screen and sleep is via normal inactivity time period.
Just installed new Ruppy ROM, (spl 3.56 and neon 1.58.25.17 radio) to see if the problem would replicate, and it still does.
Anyone had this problem with their phone?
I've had this problem for months. I've flashed a dozen different ROM's had both 3.29 and 3.56 Hard SPL (jocky) and nothing fixes it. The problem was originally posted in ROM development but one of the senior MODs moved it but I think those guys who know the programming inside and out would be the best to help us fix this.........
THe only thing I've been able to do is load S2U2 to keep it from dialing or activating programs when it turns itself back on.
I hope someone can help me with this, i went to bed last night and all i did was use opera and check my emails. I then pressed the top standby button to turn the screen off and went to sleep.
This morning i woke up and found i could not turn the screen back on. The home hardware button was lit up and nothing else was happening. Tried every button on it but the phone wouldn't wake up.
All I've done to the phone is hardSPL and have been running the Extreme topaz rom for the past 2 weeks happily.
I reset the rom to stock and no joy. I then did a hard reset and now its acting even weirder! After turning on, the screen is flicking between the phone dialing screen and the quick list screen constantly by itself!
Does anyone have any ideas? Its less than 3 weeks old!
So I've reflashed to stock rom and used the HARD SPL relocker and the phone is now only semi-broken. The rest of the hardware buttons are now working, but the power button at the top of the device may as well be dead. It has completely stopped working. it won't wake the device or turn off the device
This is a major bummer because the phone automatically turns the screen off after a minute and the only way I can get it back is to remove and put the battery back in. Looks like real bad luck for me. Back to warranty for repairs
Shortest time ever for a device to fail on me. Grrr.
Hi i have a few issues on my diamond. I hope you guys could help..
1st issue: lately my diamond keeps on resetting by itself.
2nd issue: later I've learned that when I record my voice using the software within the ROM, I don't hear anything but when I record my voice using my htc headset/earphones there is a sound.
What I did was:
This day I've flashed a new rom (Energy Rom) into my Diamond. It works ok then I flashed the Radio (Radio_1.13.25.24). I was able to use my diamond for a few hours.
Now..
3rd issue: My diamond is not powering on..
What i did before this happened was...
I pressed and hold the power button for about a few seconds so the ShutXP would pop up and I could soft reset my diamond.Before I clicked the soft reset button, I was checking out all the functions of it. then i clicked, a little icon,which is the Setup Timer Action. Here's the setup:
Action: Turn Off Pocket PC
In: (i don't exactly have seen the time indicated)
As curious as i am, I Clicked the Set Action button. It did shut my diamond off. Then I tried turning it on, but all it was doing was vibrate and the screen was black. At first I was hearing the start up sound a few times but later it didn't hear it anymore. I plugged in the charger but there's no white light on the circle button which used to have a light on the borders of the circle button when plugged in the usb cable. I tried pressing the power button plus the Volume down so the bootloader would appear but it did not. What shall I do?
Are you sure that the screen working because the phone vibrate and play the startup sound so if think its the screen that have som serious problem !!
HELP
I also flashed a new rom (Energy Rom) into my Diamond before.
It cannot run window mobile6.5.........how can I do???
I cannot connect to PC .......
I recently also had a similiar problem, after attempting a flash of the Rom, the ROM update stopped halfway through and reported that it had lost connection to the device....
The whole phone would not vibrate/power on, nothing - no glowing ring around the middle button to indicate it charging at all.
I had to return to the repair centre and somehow they didn't notice that I had modified the firmware and replaced the whole phone for free citing a hardware issue ...
Doesnt sound good if you cannot hard reset the device