I read several posts about the phone freezing while charging or by itself. my phone does the same thing - has anyone figured out how to fix this problem - its really annoying to miss important calls because of that. my phone does it couple times a day and i am running one of the summiter roms and SBPocket weather and icalendar nothing else.
Any help would be appre :!: ciated
Never come across this untill 2 days ago. My phone appeared to have locked up - The time had not changed in 2 hrs, no buttons (hard or soft) would respond. I wish I had tried to call the phone to see if the radio would still respond but I only thought of it after I had reset it.
I have no idea what has caused it although the last thing I remember doing was kicking off an update of Journal Bar. Hasn't happen since.
Mine does the same thing, occasionaly. Most recently, today.
I connected it to the USB cable, Active Sync indicated that it was connecting, but never progressed past that. I forgot about it and a few hours later unplugged it from the computer and it was still frozen.
I didn't try to call it either, will do next time. I had to use the little soft reset button to reboot it.
Running summiter's TEST2 rom, plus PocketWeather SBSH and SBSH PocketBreeze 5.1.01. Also running RhinoStat v3.0.
Ok, I had my phone lock up on me again, this time the screen was off, the buttons wouldn't wake it, the only sign of life: blinking green LED.
I tried calling my phone number from the land line and it rang several times on the land line, but no ringing or activity from the wizard (other than it winking at me with the blinking green LED).
The frustrating parts are a) missed calls and b) you have no idea how long it's been frozen!
I had the same problem until I disabled the password feature. Now the mda never locks up. It use to be a blank white screen or no response at all. After I disabled the 4 digit password feature it has not locked up since. Just my 2 cents worth
[quote="The frustrating parts are a) missed calls and b) you have no idea how long it's been frozen![/quote]
Just a small point, I could always tell how long it was locked up because I display the clock in the top bar which displays the time it iced.
Oh by the way I don't and never have used passwords to secure the device.
Related
Hey everyone
Has anyone else noticed that their TyTN II wakes from standby when switching between GPRS and 3G. At least I think this is why mine appears to wake up randomly! It will be sat on my desk in standby mode and then the screen will switch on and the signal strength bars will move.
I've checked to make sure nothing is running in the background and performed a soft reboot.
Any ideas?
Hi
The Kaiser does turn on at least once every hour (some house keeping tasks), and will turn on if the mobile signal is lost. However these on's are in unattended mode which means the device appears off to the owner so the screen will not come on.
If you have some software that likes to do work or updates the today page for example, that software may be detecting the device has turned on and in order to get your attention or just through bad programming, issues a power announcement to say turn on proper, hence the display lights up!
Regards
Phil
Thanks for the info, I'll have a look what I have on there and try and isolate what is causing the power ups.
Cheers for the help.
If you have sprite backup installed with the auto backup on low power option that causes occasional power ups to enable the power check.
I may have solved this issue. After uninstalling enAlarm the phone, no longer appears to be waking. I'm still monitoring it though
i have the same problem when im signed on to AIM. Once i sign off it stops waking up, but if its on it'll wake up every 5 minutes or so, and it is in fact annoying. Havent found out the solution for it yet so i just dont really use it that often
nando223 said:
i have the same problem when im signed on to AIM. Once i sign off it stops waking up, but if its on it'll wake up every 5 minutes or so, and it is in fact annoying. Havent found out the solution for it yet so i just dont really use it that often
Click to expand...
Click to collapse
it's when a friend log's in or out of AIM.. it's a paint, rediculious and ATT refuses to get rid of OZ messanger and use a real one.
here's the kicker. it supposed to use TEXT , but when a friend logs in or out, the message is sent to your phone, and then DATA brings up the list..
STUPID and ignorant of ATT but,. big companies do what they want!
I have been having the same problem as well. I just installed this DeviceLock program:
http://forum.xda-developers.com/showthread.php?t=305402
If you enable the "Lock on Wake" option, the device will be locked when it wakes up, so the backlight stays off and you won't call anyone by accidentally hitting buttons.
Also, I ran across this related thread you might want to check out (basically talking about the same thing, but for the Tilt):
http://forum.xda-developers.com/showthread.php?t=335433
I've been using my HTC Diamond for about 2 weeks now.
Bought it from www.plemix.com and it came unlocked , and I had no trouble at all using it and installing the HardSPL's / updating ROM (Dutty's Diamond v1.6) .
Today I ran the TomTom Navigator 7, and after a while it started to make continuous sound - the default sound when a button is pressed or touchscreen is tapped- , so I did soft reset a few times, didn't solve it, touchscreen was kinda jammed, and I took out the battery. A minute after I put it back, and it worked fine, I took some photos right after, and everything was working fine.
Then two hours later, I took out my phone from pocket to check the time, I see it's halted on the photo screen, and no response at all. So I just turned the phone off by taking out the battery, and just left it off until I came home.
Now the touchscreen is not responding to any taps or clicks, except that it seems that it still detects any sort of tap/click, because the backlight comes on from dim state when I try to tap it.
So it definitely means the touchscreen is not completely dead, but it's just not functional most part.
Hardware buttons works fine, but I'm stuck at the initial "Tap your screen to begin configuring your Windows Mobile" after hard reset. I even updated the ROM to Dutty's Diamond v1.8 just now.
Since I can't do anything and just leave it idle, it goes to [ Align Screen ] page, and still I can't press any cross, since the touchscreen is completely not responding.
Anyone had this screen death problem? Any method of solving it?
---Updated---
Just now the touchscreen worked for 30 seconds, i could actually align the screen, then it showed me the Date/Time setting page, where I could scroll the cities , but then it stopped working again. So i'm still at Date/Screen page...
--Updated--
The touchscreen works for 2 minutes after I do a soft reset / power on&off, or I should say, it works until you press some hardware key on the bottom (volume up/down buttons doesnt affect this).
After I press any of those buttons at the bottom, the touchscreen stops working.
Also, after I turn on the device, enters WM, and runs TouchFLO3D, for the entire time touchscreen works, it's constantly pressing the tasklist dropdown (upper right corner of the screen), making it constantly pop down the task list.
have you tried a hard reset?
Yes, like 3 times. Wiped everything, OS, ROM, NANDFlash.
Also updated the ROM from 1.6 to Dutty's 1.8 ROM. Everythingn works fine except for the Touchscreen.
Right now, when I turn on, the touch screen seems to be pressing all the time at the task manager part of the screen (where the [X] is), its popping up all the time the task list, then after a while, like say, 2 minutes, touchscreen again ceases to work.
Not really promising, but you could try to remove the screen-protector. Perhaps this releases any tension onto the screen.
Thanks. I've thought of that, maybe I'll try later on.
For now i'm suspecting that maybe water went in through, so I've put the phone upside down to maybe take out the water using gravity for 2 days.
It seems like it's working better now, with longer hours of normal functioning..
I'll wait and see one more night... if water is the cause of the problem, it should dry up in say 3-4 days.
It may sound strange, but pit it face down on the carpet and rub it around for a while. Its how I fixed mine. Don't ask me why it works but I had the same thing happen. I think somehow the electrical charge got dissipated from the screen and the static from the carpet recharged it.
Actually your words makes a lot of sense
My Diamond was acting completely alright today, used GPS for 2 hours and called a few people along with many weather updates.
Seems to be working fine now...
But I think what you said is pretty reasonable, since when I rubbed my dead screen , after a few rubs it started to work (2 days ago).
Thanks
yeah this had happened to me about a week ago exactly the same thing I had hardspl mine and updated radio to .05 and then a few days after I had the identical problem. However I took a shortcut and sent the phone back in and requested a replacement claiming it was defective they agreeded and sent a new one however this one already has .05 radio on it so I didn't have to hardspl it. I can't say any of these things would have worked form me as I did not try them byt symptoms are identical. my .02
Hi guys
I have noticed something weird. My phone won't ring when the screen is locked, in fact, it doesn't show the incoming call screen or anything. Eventually, I am told that "the cell phone I am trying to ring is either turned of or outside the cell phone network" by a pre-recorded message. I am running 2.1 black Quarx.
Its very strange, if the phone is unlocked and I ring it then it rings and everything is fine. If I ring it while its locked, then unlock it, then sometimes after 10 seconds it might ring eventually.
Has anybody got any idea about what is going on?
Actually, its a little more complicated as I have found out while been playing around a bit today. If I leave it for say more than 10 minutes, it won't ring. If I leave it alone for 10 minutes, then ring and let the phone ring for a minute my cell won't ring. If I hit the home button which wakes the screen up, the phone will - after a 2 or 3 seconds delay - show the incoming call screen and start ringing! It doesn't seem to matter if its plugged in or not, in fact, I can run "adb catlog" while ringing! Nothing in the logs seem to hiont at what the issue is.
I used to get something similar to what you are experiencing but somehow along the way the problems just stopped. I think its because I've flashed my phone so many times. Just reflash your phone and see if that helps. If it doesn't then flash to a different 2.1 version
Sent from my GT540 using XDA App
http colon slash slash dub dub dub dot stuff dot co dot nz/business/industries/4327808/Vodafone-customers-miss-calls-after-mystery-3G-fault
It is probably an issue with my cell phone network, rather than my phone! Which is good and bad, because it means I have to wait for those dicks to fix their stuff - I can't fix it myself.
Hi,
Have not posted in here in a while but i'm having a huge problem with my HTC one M7.
Had the phone for a year now and suffered a problem with it once before. The problem before was something to do with the phone locking itself and required me sending it off to HTC to repair. It kept bootlooping and wouldn't allow me to do anything at all.
This problem hasn't occurred since repair however last week the phone was working fine until the next morning when i woke up. My girlfriend used my phone to send herself some photo's and then put the phone on charge as the battery was running low. When i woke up the screen stays black and wont allow me to do anything. If i hold the power button the bottom two lights flash and i can hear the phone booting itself back up. I have a feeling the phone works since everyday at 6:15pm my alarm goes off and i am able to deactivate the alarm by swiping up (i remember the location of the dismiss function) it would appear i'm also able to receive calls and texts since i can hear my message and ring tone going off however cannot see the screen.
I have tried a few things such as holding buttons to reboot, shining a light onto the sensor during a reboot and fully charging etc however nothing.
I should also add i have a slight hairline crack in the screen which occurred about 9 months ago but didn't appear to affect the LCD at all or the digitiser either. Any help would be highly appreciated or any tips on stuff to try.
more information available if needed.
Many Thanks
Kris
MrWain said:
Hi,
Have not posted in here in a while but i'm having a huge problem with my HTC one M7.
Had the phone for a year now and suffered a problem with it once before. The problem before was something to do with the phone locking itself and required me sending it off to HTC to repair. It kept bootlooping and wouldn't allow me to do anything at all.
This problem hasn't occurred since repair however last week the phone was working fine until the next morning when i woke up. My girlfriend used my phone to send herself some photo's and then put the phone on charge as the battery was running low. When i woke up the screen stays black and wont allow me to do anything. If i hold the power button the bottom two lights flash and i can hear the phone booting itself back up. I have a feeling the phone works since everyday at 6:15pm my alarm goes off and i am able to deactivate the alarm by swiping up (i remember the location of the dismiss function) it would appear i'm also able to receive calls and texts since i can hear my message and ring tone going off however cannot see the screen.
I have tried a few things such as holding buttons to reboot, shining a light onto the sensor during a reboot and fully charging etc however nothing.
I should also add i have a slight hairline crack in the screen which occurred about 9 months ago but didn't appear to affect the LCD at all or the digitiser either. Any help would be highly appreciated or any tips on stuff to try.
more information available if needed.
Many Thanks
Kris
Click to expand...
Click to collapse
It looks like you tried all of the usual methods, sorry but it might just be the screen is shorted.
majmoz said:
It looks like you tried all of the usual methods, sorry but it might just be the screen is shorted.
Click to expand...
Click to collapse
I thought as much, i have ordered a new screen and once its delivered i am gonna attempt to fit it and see what happens, thanks for the reply.
I'm having quite a few issues with my ROM'd Z phone using Paranoid. I've recently updated to the latest version as soon as I was alerted.
1. The lock screen freezes, or rather becomes limited in responsiveness. I use the swipe up to unlock. When I swipe up, the clock/notifications just bounces and eventually the screen goes dark, then off. Sometimes I can reset using the power menu, but often the screen is totally unresponsive so I have to do a hard reset. On occasion I have to reset multiple times consecutively because it locks up immediately after boot... until its finally usable again. https://drive.google.com/open?id=0B7OGcalUJSgHblZob2Q2eHNkLU0
2. The phone gets hot in my pocket. When I notice this, often it has unlocked, turned on GPS, turned on the LED, taken photos and opened apps, or a combination of things. Sometimes even made a phone call, either to a contact or a recent from the log.
3. Recently I noticed it randomly ghost selecting right in front of me. I was unable to unlock and had to hard reset the phone.https://drive.google.com/open?id=0B7OGcalUJSgHVmJhQ0FOUDdLQkE
4. I am not getting SMS alerts from Optus 321 telling me I have messages from when the phone was off, or out of service range. Often I won't know till I randomly check days later, or when I miss a call (while on another call or in service range) and they leave a message.
5. Sound drops in and out from the other party. They can always hear me. Randomly, on some calls. I can have 3 good conversations, then the next I have to call back multiple times before I get enough up time.
5a. When I'm making a call, I may not even hear the outgoing ringing tone.
6. On any new call, the the volume on my Bluetooth headset is usually down about half way. I click the Vol+ and it immediately jumps to full, the volume bar already being at full.
7. When it rings, it often takes a second or more (after the ring tone has started) for the screen to turn on.
On suggestion by a friend, I disabled a lot of notifications, but the lock screen still won't unlock even when the only thing showing is the clock.
I guess there is problems with the the phone hardware, the ROM or incompatibilities with it and an APP.
Is there some diagnostics, or an app that I can run that will log what is going on and I can have someone look at those logs for me?
You should ask in Paranoid Support Thread
http://forum.xda-developers.com/xperia-zl/orig-development/rom-paranoid-android-5-t2992023
Thankyou. I could not find it.
edit: That thread is closed. There is a link at the end for a 'new home', but that thread is under Xperia ZL. Is the ZL considered the same phone?
I'm really sorry.
i gave you a wrong link. Shame on me.
http://forum.xda-developers.com/xperia-z/orig-development/rom-paranoid-android-5-t2976930
This is for yuga/c6603/"Xperia Z"