Device data after TuMa upgrade... PLEASE HELP - MDA III, XDA III, PDA2k, 9090 Software Upgrading

I upgraded TuMa 1.3 loooog back. But happened to check the devicedata after the upgrade now only. This is my device data after mt TuMa upgrade. My operator code was "CDL__001". Now its jammed.
I tried CDL_001 as operator code for IVAN upgrade. It failed in the model ID error. I tried thie JAMMED code. It also failed.
Please help.... :?:
Code:
P H 2 0 B W W E AT%CID?    5 . 0 3 . 0 2 TuMa1.12.00 % 4

Related

passwords for BA_DT_WWE_DutchRetail_14000_553_11200_Ship

Hi,
I want to install BA_DT_WWE_DutchRetail_14000_553_11200_Ship rom
on a Qtek 9090 with device data:
PH20B 0 B WWE E BRIGH001 1.22.00 0 1.22.731 1.08.00 08.00
Does anyone know de passwords for this shiped ROM
Thanks
Try IkiW backwards!

How to read this...

PH20B 0 B
WWE E
   
1.40.00 0 0
1.40.242
1.12.00 12.00
This is what i got after runnung the devicedata. What kind of phone i have??
You have blueangel device (PH20B) but the info for your cellular provider is unknown.
If you are trying to upgrade to WM5 and need to enter provider data from devicedata.txt into a bat file to patch the rom for your provider, you need to add the code for your provider.
You can find some of the operator codes here
My Provider is USA T-Mobile and I couldn't find provider code tho..What should I do?

Model ID Error during the updating

During the updating of WM5 the Model ID Error is visualized and with GetDevice Data there are strange and illegible characters. How can I resolve the problem?
Thanks
this is my DeviceData.txt:
Code:
ò„ó Ÿï€zj_Ÿ
ÿ@ð@ÿ¯÷@ÿ ?û ô ¿øü`ßEò„û"?ÿüû0ß W W E AT%CID?     5 . 0 3 . 0 2 5.03.02 1.12.00 % 4
1. download attachment, unrar it
2. copy the rom file nk.nbf to that unrar folder
3. run setoperator.bat
4. run MaUpgradeUt_noID.exe (sometimes it help to take out SD card)
imatrix
thanks
I have followed your suggestion and has been all right everything
thanks, thanks, thanks
I have iMate PDA2k. I forgot what operator ID it had before. Can anyone help....
Is it
CDL__001 or
CDL___001 or
other?????????

Reset Simlock Count on Hw6515

Does it possible to reset the simlock counter try?
I've a problem with it : Simlock say i've tried 20 times to enter simlock code!
And now i can't valide new code : Ok button stay grey
This happened after i used vBar to kill Simlock task ! Number of try has reach 20 and now it seem to be lock for many days.
If someone can help me... Please cause now i've my simlock code but i can't valide if !
Ipaq Hw6515 French Bouygue telecom
Last ROM 1.23 French
vBar (great freeware but dangerous for simlock!) :
http://www.pocketpcfreewares.com/fr/index.php?soft=562
Go into bootloader using mtty.exe, you need to access AT command interpreter, in some htc devices this is done by command 'rtask 7' on others is 'rtask b' (I don't know on the beetles). Should be something like this:
Code:
USB> rtask b <--- go into AT command interface
ate1 <--- type this to enable local echo
atv1 <--- type this to enable verbose output
[email protected]=0,1,code <--- replace "code" with your MSL
[email protected]=0,2,code
[email protected]=0,4,code
[email protected]=0,8,code
[email protected]=0,16,code
[email protected]=0,32,code
[email protected]?40
If the last command returns simlock=00 means it's unlocked, other vaule means is still locked.
No need to reset the counter
[email protected] Doesn't work
Hi,
Thank for your reply but it doesn't work :
[email protected] doesn't seem to be implemented :
USB>h rtask
Usage:
rtask [Type [Value]]
Type(hex) 0: Reset radio and [value](hex) is ignore.
Type(hex) 1: Turn on radio, lease use type 3 and 4 instead.
Type(hex) 2: Turn off radio and [value](hex) is ignore.
Type(hex) 3: Run radio image and [value](hex) is ignore.
Type(hex) 4: Run radio bootloader and [value](hex) is ignore.
Type(hex) 7: Radio AT Command Debug.
Type(hex) 8: GSM trace route.
Type(hex) 9: Run radio external bootloader and [value](hex) is ignore.
Type(hex) A: Radio image flash by external bootloader and [value](hex) is ignore.
Type(hex) C: Select debug path.
Type(hex) D: Radio AT Command with GSM trace route.
Type(hex) 10: Set radio external boot UART mode(fast(1)/normal(0)).
USB>rtask 7
Radio AT command debug.
Wait 177 ms
ATCmd Version 0.1
CAIF Init Done
ate1
0
atv1
aatv1
OK
[email protected]?40
[email protected]?40
ERROR
[email protected]?40
[email protected]?40
ERROR
[email protected]?40
[email protected]?40
ERROR
ati
aati
Ericsson Mobile Platform
OK
And when i trie [email protected]=0, facility(0 to 32), unlocking code => ERROR
I've tried with the first ROM 1.05 and the last 1.23, with the 1.23 the help for rtask disappear!
Does Someone know another methode or command to accomplish my unlocking action? Please I gonna be crazy, I've left my ipaq running simlock 7 days and Validation button stay grey!! I've reset to test [email protected] without success
ouch, then hw6515 bootloader is different from what I've seen previously....
hw6515a locked
i have the same problems for months. my hw6515a 22 times. and i cannot have the button ok enabled. i cannot reset it. im still fresh on the boat. i downloaded the mtty.exe but i dont know how to use it. how to get my fone in the bootloader. Pof. you genius. plz show me how to unlock this fone. or reset the simlock count back. many thanks. Andrew. [email protected]
pof said:
Go into bootloader using mtty.exe, you need to access AT command interpreter, in some htc devices this is done by command 'rtask 7' on others is 'rtask b' (I don't know on the beetles). Should be something like this:
Code:
USB> rtask b <--- go into AT command interface
ate1 <--- type this to enable local echo
atv1 <--- type this to enable verbose output
[email protected]=0,1,code <--- replace "code" with your MSL
[email protected]=0,2,code
[email protected]=0,4,code
[email protected]=0,8,code
[email protected]=0,16,code
[email protected]=0,32,code
[email protected]?40
If the last command returns simlock=00 means it's unlocked, other vaule means is still locked.
No need to reset the counter
Click to expand...
Click to collapse
The bootloader are totally different, maybe the one that your are testing is on ipaq 6365...CMIIWW thanks
do HARD-RESET, that what i did to my H6515 USA version
Need a little help I am new with Ipaq 6515 but have unlocked other PDA and Pocket pcs, one thing how to put 6515 in bootmode and also how to hard reset it please can any one help.
thanks
bcnboy
need too to reset simlock counter.. this also can unlock beetles devices??
Hi all. I have the hw6515 spanish, sim locked, and french, without sim lock. Iz it possible to make both english and unlock it???
How to reset unlock codes counter on HP 6515a?
How can I manage connection with mtty.exe and device. Because there is not any COM ports emulated by AS.
Pof - a little help with X01HT
Hi - this worked on the HTC Hermes (I have X01HT)
Before i started - [email protected]?40 - returned - 01
I then ran [email protected]=0,1,code (code= the code I bought off a member here)
Then [email protected]?40 - returned - 00 (unlocked)
Thanks heaps
lemming77 said:
Hi - this worked on the HTC Hermes (I have X01HT)
Before i started - [email protected]?40 - returned - 01
I then ran [email protected]=0,1,code (code= the code I bought off a member here)
Then [email protected]?40 - returned - 00 (unlocked)
Thanks heaps
Click to expand...
Click to collapse
I think i need help with this. In mtty i get command error!!! all the time. Maybe I need to get the password? bootloader_pwn3d.pdf doesnt help.
I have my code, I just need to know how to input it. I have HardSPL installed maybe I will try flashing another rom to input the code?
How to apply to elf
dear sir
HOW TO APPLY TO ELF & what is Msl that will be inserted instead of code
Cant reset hermes
Khianto said:
The bootloader are totally different, maybe the one that your are testing is on ipaq 6365...CMIIWW thanks
Click to expand...
Click to collapse
DOES ANYONE KNOW HOW TO RESET COUNTS ON HERMES I TRIED LIKE THIS WITHOUT ANY RESULT
task 32
Level = 0
Cmd>28
Command error !!!
Cmd>task 32
Level = 0
Cmd>task 28
Storage format start
Write Nand Success
dwBlockToWrite = 13
Storage start block: 464
Storage Total block: 472
Total Bad Block in CE: 0
NeedToEraseBlockStart: 477
Storage format success
Cmd>task b
Cmd>task 7
Cmd>task b
Cmd>rtask b
Command error !!!
Cmd>rtask 7
Command error !!!
Cmd>task 7
Cmd>ate 1
Command error !!!
Cmd>ave 1
Command error !!!
Cmd>rask ave 1
Command error !!!
Cmd>task ave1
Cmd>task ate 1
Cmd>USB hrtask
Command error !!!
Cmd>hrtask
Command error !!!
Cmd>h rtask
Command error !!!
Cmd>task h rtask
Cmd>USB> rtask b
Command error !!!
Cmd>rtask b
Command error !!!
Cmd>rtask 7
Command error !!!
Cmd>'rtask b'
Command error !!!
Cmd>rtask 7'
Command error !!!
Cmd>[email protected]=0,1,code <--- replace "code" with your MSL
[email protected]=0,2,code
[email protected]=0,4,code
[email protected]=0,8,code
[email protected]=0,16,code
[email protected]=0,32,code
[email protected]?40
Cmd>
Cmd>[email protected]=0,1,00000000
Command error !!!
Cmd>simlock=00
Command error !!!
NO USB JUST CMD BUT I READ IT WAS THE SAME THING.
THANK YOU ANYONE WHO KNOWS OR HOW TO DOWNGRADE SPL 1.4 OLIPRO TO 1.04 I HAVE SIM LOCKED 18 TIMES THX. AND I HAVE THE CODE.
AND ANYONBE KNOWS HOW MANY TIME I HAVE TO WAIT FOR OK BOTTON? OR IT CANT BE DONE

QTEK 9090 - Help plz

Hello. First of all thanks for this great forum.
Second, i got a QTEK 9090 (not the best but welll...) and I was trying to unlock the SIM. I went to:
http://forum.xda-developers.com/showthread.php?t=240784 and download the two versions of the unlocker:
xdadev_all_unlock-v1.5.exe
xdadev_all_unlock-v1.6_138.exe
I did this, just like it says in the thread:
copy it to your phone, and run it.
some diagnostic output will be in the file \xdadev_all_unlock.log
After a few minutes it says Phone successfully unlocked and then I restart the QTek. I have done this with both, the sim inside and without the sim.
The log is the following:
dadev_all_unlock started
device=PH20B
key found
ril ioctl 0xc2: 00000000
simlock answer: %SIMLOCK= 00
0
current lock status: 00
security answer:
000
security answer2:
at%LISTNETWORKCODE answer: 0
at%LISTNETSUBCODE answer: 0
at%LISTSPCODE answer: 0
at%LISTCORPORATECODE answer: 0
at%LISTSIMCODE answer: 0
at%LISTIMSIRANGECODE answer: 0
at%CLEARNETWORKCODE answer:
at%CLEARNETSUBCODE answer:
at%CLEARSPCODE answer:
at%CLEARCORPORATECODE answer:
at%CLEARSIMCODE answer:
at%CLEARIMSIRANGECODE answer:
simlock answer:
invalid sim lock answer
xdadev_all_unlock done
ril ioctl 0xc2: 00000000
ril ioctl 0xc6: 00000000
After I restart it SOMETIMES it says its looking for the network and others it just says out of service. When it tries to look for the network it just stays there... I mean its like an infinitive loop. It never finds out a network.
The info about the QTEK is:
PH20B 0 B ESN N TELCE301     1.40.03 0 3 1.40.178 1.12.00 12.00
So I thought that maybe the ROm version or radio may affect and looked up for xda2unlock but it says its only for 1.05.12 soo I'd better to ask here.
I know that maybe all of you have just got this working, so I'd like to ask for help.
Thanks if you can help me. Any info that you guys need, just ask it and I will try to get it.
Thanks a lot.
Oh and my last question is that as I see this Pocket uses 802.11b as wireless protocol, is there any way(a hack or something) to use it with a 802.11g wireless router?
Thanks.
Any ideas...?

Categories

Resources