Database Develop

SX66 Radio Upgrade - keep getting country code errors, help

YES, I READ EVERYTHING ON WIKI
Unfortunately the wiki dev is now outdated; I successfully applied the official ROM update from siemens, and have tried just about every freaking variation in order to apply the 1.06.02 radio upgrade, but to no avail. Can someone who has done this please please please point me in the right direction? Thanks!

http://forum.xda-developers.com/viewtopic.php?p=92574#92574

Got radio 1.06.02 to install on SX66 with this file
I was trying to upgrade the radio stack and had a heel of a time doing it. But I finally got it working. This is where I started:
I have siemens sx66 Cingular
It was:
Rom: 1.20.10
Date: 10/08/04
Radio 1.02.10
Protocol 1337.35
ExtRom 1.20.115
I installed the latest patch from siemens and then it was:
Rom: 1.33.10 WWE
Date: 1/21/05
Radio 1.02.10
Protocol 1337.35
ExtRom 1.33.110
It turns out you need to use the BaUpgradeUt.exe file from the source upgrade, the sx66 wont work with other radio stacks. It just gives you checksum errors. I got it working, and I'm attaching a radio stack update rar file. To install the radio stack on a sx66 with v1.33 just run the BaUpgradeUt.exe program in this rar file and follow direction on the screen.
This is what I tried before I got it working:
I am trying to install the radio rom and I'm getting errors. On the BA_FRA_BelDT_12202_558_10602_Ship version of 1.06.02 radio stack I get a checksum error. The operator and checksum fields are both blank when I run fix.bat. Here is the output of them. I added -v to get more info.
C:\Documents and Settings\1st User\My Documents\My Phone\SX66Update>xda3nbftool
-v -x radio_.nbf radio_.nba 0x20040523
devicetype= PH20B
operatorname=
language= WWE
version= 6.02
crc=
C:\Documents and Settings\1st User\My Documents\My Phone\SX66Update>xda3nbftool
-v -sd PH20B1 -sl WWE -so XGULA001 radio_.nba
devicetype= PH20B
operatorname=
language= WWE
version= 6.02
crc=
C:\Documents and Settings\1st User\My Documents\My Phone\SX66Update>xda3nbftool
-v -c -u Radio_.nba
devicetype= PH20B1
operatorname=
language= WWE
version= 6.02
crc=
updated checksum to e07cf3cf
C:\Documents and Settings\1st User\My Documents\My Phone\SX66Update>xda3nbftool
-v -x radio_.nba radio_.nbf 0x20040523
devicetype= PH20B1
operatorname=
language= WWE
version= 6.02
crc=
I thought the password looks like a date, so I changed the password the the create date of the file, that didn't work. I then decided to try a different radio rom. I grabbed the radio rom out of:
BA_WWE_BP_12200_169_10602_SHIP and tried it with that one. On that one I get a wrong password.
I tried searching for sx66 radio password on the search enging found nothing.
I tried BA_ITA_DT_12204_168_10602_ship radio stack same problem.
I'm beginning to think the checksum creation is different.
That's when I decided to use the source's version of BaUpgradeUt.exe . It complained because the HTCRUU.conf and HTCRUU.dll weren't there, I coppied those from the source as well, and VOILA!!! it worked like a charm!
HAPPY UPGRADING SX66ERS!!!!!!!

It turns out you need to use the BaUpgradeUt.exe file from the source upgrade, the sx66 wont work with other radio stacks. It just gives you checksum errors. I got it working, and I'm attaching a radio stack update rar file. To install the radio stack on a sx66 with v1.33 just run the BaUpgradeUt.exe program in this rar file and follow direction on the screen.
Can you tell me where you are getting this file and where this .rar file is?

Upgrading my UK o2 XDA IIs. Am I on the right track?

Hi guys,
I have had my XDA IIs for a few weeks now and I have been reading up on how to upgrade it to 1.40 with the latest 1.13 radio. I would appreciate if I could just describe the steps I am going to take to upgrade it and see if anyone can tell me if I have misunderstood some of the wiki/ forum instructions.
My current version is (from DeviceDate.txt) PH20B 0 B WWE E O2___001 1.31.00 0 0 1.31.139 1.06.00 06.00.
1. I have downloaded from the wiki (ftp://xda:[email protected]_11200_Ship/Extracted_Type_I_CE_Rom/nk.nbf) From what I understand, a Type I file is one that can be edited with xda3nbftool.exe- is this correct?
2. I have also downloaded the 1.13 radio ROM from http://forum.xda-developers.com/viewtopic.php?t=23807&highlight= . I understand this is also a type I file as mdaIIIuser converted it.
3. Using the Type I upgrade tools, I use the instructions from the wiki getting started (http://wiki.xda-developers.com/index.php?pagename=BA_GettingStarted) and edit editfix.bat for my Operator ID etc.
4. At this stage I am not upgrading my Extended ROM with anything, so I am not putting any ms_.nbf into my upgrade directory. I am not upgrading my ext rom like this as we cannot edit ms_.nbf for Blue Angel (which is a pig as I am used to my Himalaya!!!!!)
5. I run editfix.bat from command prompt which hopefully will convert my rom and radio files to O2 UK.
6. Now that my files are converted I run BAUpgrade_UT.exe (from what I understand I dont need the MA_upgradeUT.exe since my headers should all be correct) If this doesn't work due to country code error etc, I use the cracked MAUpgrade_UT files and try again (twice).
7. My radio and ROM shoudl now be 1.13 and 1.40 WWE respectively.
8. My extended ROM is still 1.31 though so I unlock and unhide it and remove all files (except for my O2 UK customization cabs for GPRS etc) and replace them with the 1.40 Base. At this stage I get a little confused, from what I gather, i need to pick one of the QTEK base roms. Which one would be the best to add my O2 stuff to? I was thinkng that I-Mate Qtek 1.40.147 WWE (as it uses the config.txt method, which I am used to!) I copy these files into my extended ROM, upadate the config.txt to include my O2 UK and other customizations and then I do a hard reset. And there you go, job done, I hope!
Please, if anyone who has done this before with Blue Angel could check over my steps to see if I have done anything particularly foolish. I am so used to all hte tools used to customise my Himalaya so it is just a case of getting used to a new way of doing things.
Thanks for any help in advance!
Fin

I thought I should include the contents of my editfix.bat:
REM ~DeviceData.txt PH20B 0 B WWE E T-MOB101 1.12.22 2 2 1.12.169 1.02.00 02.00
REM Replace the question marks with the data from ~DeviceData.txt
REM 'sd' stands for device, e.g. PH20B.
REM 'sl' stands for language, e.g. WWE.
REM 'so' stands for operator (Country ID), e.g. T-M0B101.
REM ms_.nbf Password = 0x20040522
REM nk.nbf Password = 0x20040521
REM radio_.nbf PAssword = 0x20040523
xda3nbftool -x nk.nbf nk.nba 0x20040521
xda3nbftool -x radio_.nbf radio_.nba 0x20040523
xda3nbftool -sd PH20B -sl WWE -so O2___001 nk.nba
xda3nbftool -sd PH20B -sl WWE -so O2___001 radio_.nba
xda3nbftool -c -u NK.nba
xda3nbftool -c -u Radio_.nba
xda3nbftool -x nk.nba nk.nbf 0x20040521
xda3nbftool -x radio_.nba radio_.nbf 0x20040523
del *.nba
-Fin

Looks fine (only skiimed it though)
Note the files are type I so you need the type I upgrade files (which you have fixed) the Ma tool is for type 2 files.
Dont mix them up.

Thanks for checking for me. Have just updated my phone and all seems fine, still need to check my GPRS and operator settings are all there!
Thanks again,
Fin

the 1.40 has BT 3900, your EXT Rom might have cabs that install BT 3500, which will be a downgrade.
Check that your Ext rom is clean of patches and add the 1.40 patches off wiki that you need. Browse the kitchen for more info.

I have read through the ERK in wiki and I can't see anything to install bluetooth version 3500. I might be wrong though, the only cabs I have left from my previous extended ROM are as follows:
CAB: \Extended_ROM\BA_cm_rm_map_o2_v3.CAB
CAB: \Extended_ROM\O2UK_AP_09212004_BA_1.sa.CAB
CAB: \Extended_ROM\O2UK_Button9_WWE.sa.CAB
CAB: \Extended_ROM\O2UK_Connection_Setting.sa.CAB
CAB: \Extended_ROM\O2UK_Hide_WLan_message.sa.CAB
CAB: \Extended_ROM\O2UK_PIE_homepage.sa.CAB
CAB: \Extended_ROM\O2UK_Regional_TimeZone.sa.CAB
CAB: \Extended_ROM\install.ARM.CAB
From what I can gather these are just customization cabs for O2 UK, if anyone knows any different please let me know!
Thanks again for your help!
Fin

Looks good, have fun

Update XDA IIs
I have the unlock UK xda IIs, and I have download the new update. I was hopping someone can answer my question. If I install my update will it lock my phone again?

Once you unlock, it's unlocked for good - no need to worry about changing ROMs back and forth.

How to read this...

PH20B 0 B
WWE E
 
  
1.40.00 0 0
1.40.242
1.12.00 12.00
This is what i got after runnung the devicedata. What kind of phone i have??

You have blueangel device (PH20B) but the info for your cellular provider is unknown.
If you are trying to upgrade to WM5 and need to enter provider data from devicedata.txt into a bat file to patch the rom for your provider, you need to add the code for your provider.
You can find some of the operator codes here

My Provider is USA T-Mobile and I couldn't find provider code tho..What should I do?

Model ID Error during the updating

During the updating of WM5 the Model ID Error is visualized and with GetDevice Data there are strange and illegible characters. How can I resolve the problem?
Thanks
this is my DeviceData.txt:
Code:
ò„ó Ÿï€zj_Ÿ
ÿ@ð@ÿ¯÷@ÿ ?û ô ¿øü`ß
Eò„û"?ÿüû0ß
 W W E AT%CID?  
   5 . 0 3 . 0 2 5.03.02 1.12.00 % 4

1. download attachment, unrar it
2. copy the rom file nk.nbf to that unrar folder
3. run setoperator.bat
4. run MaUpgradeUt_noID.exe (sometimes it help to take out SD card)
imatrix

thanks
I have followed your suggestion and has been all right everything
thanks, thanks, thanks

I have iMate PDA2k. I forgot what operator ID it had before. Can anyone help....
Is it
CDL__001 or
CDL___001 or
other?????????

Help with Radio Upgrade on Tuma 1.3

I have upgraded my Cingular SX66 to Tuma 1.3 I must say it is very nice. I do need some help with a Radio ROM update. I get a code 100 error and I know the id needs to be set in the ROM I am unsure what ID to use. Here is the current DeviceData .txt results -
P H 2 0 B 1 W W E 5 . 0 3 . 0 2 TuMa NONE 4 % 4
xda3nbftool -sd ????? -sl ???? -so ???? ms_.nba
xda3nbftool -sd ????? -sl ???? -so ???? nk.nba
sd should be PH20B1
sl should be WWE
but what should "so" be?
THANKS