TuMa 1.3 & Model ID - MDA III, XDA III, PDA2k, 9090 Software Upgrading

I did a upgrade to TuMa 1.3 month before. I am happy with the WM5. I descided to upgrade to some other WM5 version. The attached is my device data...
I tried to do the Setoperator.bat CDL__001. But this didnt work. It resulted in "MODEL ID ERROR"
Please help....

Now Connection error
Now it shows connection error....
I put the device in the boot loader mode. And tried to upgrade... results in Connection error. Screen-shot attached.
PLEASE HELP

I tried to upgrade without putting in the BootLoader mode. It gave a error as Model ID error. Please help

Related

Stack on bootloader

Hello,
i have a
PDA2K i tried to upgrade it & now it's stack on the boatloader
i tried to upgrade the radio first when i got the message
ERROR 114
then i treid to full upgrade the ROM & Radio
I got the following message
ERROR 120: Country ID ERROR N-N-12-12-12
So what should i do.
Please help.
I never got this, but TRY using the Magician No Country ID upgrade files. You can find them inside the upgrade files for WM5 (I don't know if they're available anywhere else)

qtek9090 upgrade interrupted

Hi, my colleague tried to upgrade qtek9090.... and now returned to me crashed!!
Now when I turn on I see on splash screen: No GSM and D 1.40.04 ITA.
I tried to reapply latest original ROM (BA_DT_ITA_14004_153_11200_Ship) but I get the message R2500 D1001 - CB2.07 -1 and red message ERROR 120: COUNTRY ID ERROR No-No-21-21-21
If I use MaUpgradeUt_noID.exe with same ROM the update starts, but after few seconds I get the message R2500 D1001 - CB2.07 -1 and a red message with ERROR 114: RADIO ROM UPDATE ERROR
It seems that only Radio ROM is corrupted, but I don't know how to restore it.
If someone has any idea, please let me know, otherwise I have to return this for servicing to dangaard (and wait)
many thanks

CRASH after updating Rom 1.32 to 1.34 !! :(:(

Hello everybody, my name is sebastien and i come from belgium.
I have a problem with my mteor mobile phone. I was one version 1.32 and i tried like everybody to upgrade it on 1.34. Now the phone doesnt work anymore (freezing on the startup screen).
The bootloader is working (power + cam button), but i have different versions of rom upgrade utility on my computer. Only one version works (v3.12.3.0, properties of ROMUpgradeUt.exe). This version of upgrade rom utility came with the 1.34 rom.
The others one give me an 260 Error : Update Error. (crash on "verifying information on your smartphone, please wait").
So i tried the working Upgraderom Utility with all the roms i have (1.13, 1.32 and 1.34) and i have always the same error after 1% updating : 294 invalid vender ID.
I tried to put the firmware on the root of my microSD card (rename BREEIMG.nbh). The bootlaoader checks the firmware ("checking") and then it says "00028002" "Not allow" and then it goes back to the bootloader. I tried this method with the three firmware i've got.
Could you help me please !! Thank you very very much. Sebastien.
Hi
I have a same problem
Hi lacenko!
just put your mteor in bootloader mode
connecto to pc (disable activesync usb connection)
and start the mtty (usb console program) -> infos about in wiki!!
now just use the info command and look what cid you have!!!
after you know that search/ask provider for an update !!!
only this can help!!
after you have the original shipped rom, please upload it to rapidshare and we can link it...
when you have flashed you can reflash with a other newer better rom!!
but theres no way now until you become a rom that matches your cid to flash the phone to working state!

conection lost during upgrade

hello i have a qtek 9090 but my wm6 rom didnt work anymore zo i ceep gettig
stuck in bootloader mode
but now the problem when i want to get it working agian but when i start an upgrade it wil work for 7 to 98 % and then the upgrader says ce upgrade faild and windows says that my device is disconnected
so the problem is i cant get it upgraded.
can someone give me some advice
are you receiving the Error 112? if you are then i found this posts from another thread it is titled Error 112 CE ROM Update Error it mentioned requiring a clean pc setup.
i hope that works.
mine is able to complete the process but then the wm6 is the same....same contacts same programs...no difference...dont understand

Please help, and please dont abuse

Hi Guys, I have bricked my Cingular branded BA Siemens SX66 PH20B. I am getting the no GSM error, I have read the WIKI and read the thread that follows Help, my device shows "No GSM" after upgrading, and I can not perform any more ROM upgrades Link. I have tried the steps and nothing seems to be working, I guess I must be a complete noob but i have spent hours trying to get the radio to install and nothing will work. I have spent 6 or 7 hours looking on here before i requested help I was running the radio unlock when a tree took out the power line to my house. I edited the ruu.conf and that didnt help I ran the MaUpgradeUt_noID.exe and it will update my rom with no problems at all it just hangs at the radio install and wont go anywhere i get a "Error 114: Radio update error" If someone can help I would appreciate it.
Might help.
I'm not quite sure about your problem but I did get the same radio update error couple times. One thing that I had to do is to let my computer (active sync) recognize my device first. After that the redio update error is gone.
I got it fixed, what i did was install an original rom from seimens that i got at SX66 (Blue Angel) Standardization Project, itfixed the radio error and then i could reinstall the updates

Categories

Resources