hi guys, i've got the following problem.
i've successfully paired and conected both my r35 and laser keyboard and both work great as long as i'm using just one device, the problem occurs when i try to use both of them at the same time. for example, i'm listening to music on the r35 via tcmp, i turn on the keyboard and my music starts cutting on the r35 until finally it's gone and the keyboard never manages to connect.
any ideas?
yep
dont do both at same time hehe
Sounds like both devices are using more simultaneous bandwidth than the BT spec allows... Sorry :/
Related
upgreading to 2.8.7 last night, go to buy an itech r35 stereo bt headset this morning...... and..... bad sound comes from my earphone when i open wmp and play mp3...... :shock: ............which cost me 550 CNY
you're using the a2dp profile?
what exactly do you mean by ugly sound?
i have s35, too. but i haven't tried it with the a2dp yet.
I have the WWE A2DP rom loaded, I have a S38 and I have found that once paired it works but if you turn off the headset and turn it on it does not connect the stereo profile again, you have to go in to the bluetooth device and tap set bluetooth stereo audio to get it to work again.
Have you found this?
yea...same here...i have the itech BlueBAND...and everytime i turn it off, i have to reconnect it manually via the bluetooth settings.
anothing thing is...sometimes my music gets cut for a few seconds and it comes back....this happens when i dont use a sim card (PDA only mode)...anyone else found this?
niver2002 said:
upgreading to 2.8.7 last night, go to buy an itech r35 stereo bt headset this morning...... and..... bad sound comes from my earphone when i open wmp and play mp3...... :shock: ............which cost me 550 CNY
Click to expand...
Click to collapse
Which city did you buy the R35 in China?
mack said:
yea...same here...i have the itech BlueBAND...and everytime i turn it off, i have to reconnect it manually via the bluetooth settings.
anothing thing is...sometimes my music gets cut for a few seconds and it comes back....this happens when i dont use a sim card (PDA only mode)...anyone else found this?
Click to expand...
Click to collapse
using the motorola ht820 headphones connect as soon as i switch on the headset, the headphones make a low quality sound then a nice quality sound as the bluetooth streaming is found. no need to re-pair.
i have noticed a loss of sound sometimes, but this seems to coincide with other people near me on the train turning on their phones.
hmm...guess its an Itech thing. Hope it get works out by the final release. I love the earbuds, or we will be looking for the motorola.
I have the same problem (sound being cut) with Anycom BSH-100 stereo headset. To my amazement, I found out that I can cut down these disturbances if I place the phone on my sleeve instead of on the belt. Also, it happens much less when I'm static - as opposed to riding my bicycle (for which I bought the BT headset in the first place). I'd love to find out who's the culprit - whether the headset, the RF in the K-Jam - or the software (in which case there's hope for an improvement).
I have the same problem (sound being cut) with Anycom BSH-100 stereo headset. To my amazement, I found out that I can cut down these disturbances if I place the phone on my sleeve instead of on the belt. Also, it happens much less when I'm static - as opposed to riding my bicycle (for which I bought the BT headset in the first place). I'd love to find out who's the culprit - whether the headset, the RF in the K-Jam - or the software (in which case there's hope for an improvement).
where did you download the profile for 838/9100?
my device can't work with s35, so my s35 has to stay in a side.
Just wonder if Niki can support to have BT connection to A2DP BT Headset while using BT GPS receiver for GPS....
yes it works, although not stable when calling.
you may have to restart the bt headset a2dp. after conecting the bt gps antenna.
erkv said:
yes it works, although not stable when calling.
you may have to restart the bt headset a2dp. after conecting the bt gps antenna.
Click to expand...
Click to collapse
Do you mean that while i'm using the BT connected to GPS receiver and navigating... all the sudden a call came in... i can use the BT headset to answer the call... and the GPS will still able to track and navigating?
ZhenMing said:
Do you mean that while i'm using the BT connected to GPS receiver and navigating... all the sudden a call came in... i can use the BT headset to answer the call... and the GPS will still able to track and navigating?
Click to expand...
Click to collapse
Thats right - at least with the sony headset and tomtom set I use. Both work well all the time
Here it works fine a Logitech bluetooth stereo headset with mic and TomTom with a keomo 16 ch gps receiver, when your call is ended it activates the mediaplayer by itself, only sh*ty thing is that the logitech headset so now and then isnt receiving 100% , but its a almost perfect combination.....
Mine works fine, either with the Moto HS820 or the A2DP Jabras. However I wouldn't ever recommend using A2DP phones whilst driving - it cab be dangerous.
Your normal one-ear devices don't tend to stop you from hearing external noises, which can be essential for safety whilst driving.
that's true... having a2dp headphone in the car is dangerous... but if it's using the normal headset with the GPS that will be great!!!!
since in spain it is forbidden to use headsets while driving, either a2dp or calls, i use a parrot mk6100 w a2dp.
when using the a2dp thru my car stereo i can connect my gps bt antenna.
when the call comes everything works fine.
but, it gets some time to go back after the call (navigator + a2dp). and it is not that smooth. it seems like that is pushing too hard to the limits of the niki.
i read the answer is to restart the conection w the a2dp.
btw, i dont have installed the voices in the navigator so the navigator doesnt interfere w the a2dp.
i can keep trying if you have some other issues.
gps antenna issue blue tooth
hi,
I just boot a niki100, with orange provider in frence. i'm tryng to use a bluetouth gps antena.
both equipement are copled but when i'm launching the navigor the gps peripheric is shown bu the niki only durong approximatively 10 seconds.
I checked all configurable possible, including the verification of the alimentation rule.
i tried si antenna with anothet pda, it is working well. all tests were done without success.
someone could help me?
thank you.
try google maps
or other navigation software
should work
and check the ports btw, just in case.
sometimes they are paired but, not using the right ports may cause some problems.
#2 10-04-2008, 04:16 PM
Marcos Paolo
Junior Member Join Date: Oct 2007
Posts: 9
bluetoouth GPs antenna issue
--------------------------------------------------------------------------------
I tried the antenna with another pda, it is working well. all tests were done with success. I don't understand whynot with the niki.
I did a complementary test, I tried the niki with another gps antenna and it is working well too.
I conclud about a compability issue between my antenna and the niki. maybe due to the bluetooth version.
is it existing a .cab to update the bluetooth driver?
thank you.
not found yet
but keep posting, i am interested too.
any news?
after to have tried many rom and radio version, i finished to buy a new antenna bluetouth v2.
the newone is working. i will sale the oldone to someboday having older phone.
I use a gear4 blueye (can get one for about £20ish on ebay including postage) at the same time as using gps (a holux gpslim 240 with tomtom) in the car.
Plug it into the car stereo and can now listen to ipod music, change tracks, volume & pause+play the ipod safely.
And also make calls by tapping the button and using phone's voice dial, this further pauses any music I'm listening to whilst in call and resumes at the end of the call. It really is a super little device!
ps. if people are having any interface issues: slow hanging up etc.. after calls, then it's worth disabling whatever phone skin you have using 'Advanced Configuration'. The default skin plays much nicer with bluetooth.
Quite a while ago I bought a Sony BT3600U car stero as it was bluetooth enabled so I could stream music from my Kaiser direct to the car speakers.
All was working well until I moved the car stereo to my new car.
Now although it's all paired up fine when I turn on the car stero it just links to the handsfree bluetooth but doesn't automatically go to wireless stereo.
Instead to get the wireless stereo to work I have to go into bluetooth settings click on xplode (which is the car stereo) and then choose set as wireless stereo.
I know from before that I managed to get it to automatically switch to wireless stereo when in range of the partnered car stereo but I can't for the life of me remember how I did it.
Does anyone have any clues?
Sounds to me like it's an issue with the stereo, not the Kaiser.
Perhaps try disabling the handsfree service (for that pair) on the Kaiser? I can't remember exactly if you disable certain services.
cotc2001 said:
Quite a while ago I bought a Sony BT3600U car stero as it was bluetooth enabled so I could stream music from my Kaiser direct to the car speakers.
All was working well until I moved the car stereo to my new car.
Now although it's all paired up fine when I turn on the car stero it just links to the handsfree bluetooth but doesn't automatically go to wireless stereo.
Instead to get the wireless stereo to work I have to go into bluetooth settings click on xplode (which is the car stereo) and then choose set as wireless stereo.
I know from before that I managed to get it to automatically switch to wireless stereo when in range of the partnered car stereo but I can't for the life of me remember how I did it.
Does anyone have any clues?
Click to expand...
Click to collapse
I have an XCarLink and I have the same behaviour which is a bit annoying. I did a bit of searching a while ago but never got anywhere. If there is an (easy) answer to this I would be interested.
Andy
No it's def not the stereo , i've got it working sort of using A2DP toggle but it's not automatic.
Installed A2DP toggle and linked it to the audio manager on the kaiser.
So I just click the play button on my home screen and it kicks in the wireless stereo and launches the audio manager at the same time and it all works.
It's just annoying as I know that before I moved the stereo from my Honda civic to my hyundai Coupe all I had to do was just start audio manager and the wireless stereo kicked in automatically.
I've seen this too; I have a Sony BT5000 (basically the same as the OP), and I've seen it with both Wizard & Kaiser devices.
A bit more testing - expected behaviour?
I went out in the car earlier and had to do the 'set as wireless stereo' trick to get the BT streaming working with the XCarLink. When I switched off the engine and the head unit powered off the headset icon disappeared from the phone (which is normal) indicating there was no connection. I then left the car but left the bluetooth enabled on the phone instead of switching it off as I normally do. When I returned and drove off the partnership was re-established and the headset icon re-appeared and I was able to stream music etc without doing the 'set as wireless stereo' trick.
I tested this a couple of times and the behaviour was the same - i.e. leave BT enabled on the phone but switch on/off the XCarLink (car kit) and the partnership re-establishes each time with Wireless Stereo working. Switch BT off and then back on on the phone and you have to manually select Wireless Stereo.
Is this the expected behaviour or is there a trick to getting this working seamlessly?
Andy
That didnt' work for me. I even did a hard reset on my phone to see if there was something I had installed causing it not to relink.
If I had any hair, i'd be pulling it out by now
It's so frustrating knowing that I had worked it out once before but when it comes to the crunch you can't remember for the life of you how you did it.
Well i've been searching for an answer and found this here
http://forum.xda-developers.com/showthread.php?p=1318542#post1320648
@ debully>
There is a very simple fix to enable the Pioneer to recognise and connect to your phone. You see the Pioneer is searching for a phone or a Smartphone, the Trinity identifies itself as a PPC and so the Pioneer ignores it.
The Class of Device or CoD must be changed so that the Trinity identifies itself as either a phone or Smartphone.
If you change the Dword Data value in.... HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SY S\COD"
to 5374476 (decimal) and set bluetooth to discoverable in your Trin, you should find that it connects automatically.
It took me 8 months to find this out.
PS. I don't have the problem with not hearing the callers.
Click to expand...
Click to collapse
But it didn't work for me - on the plus side though I did find a really cool mortscript from the same guy which when I plug the kaiser into my car cradle/charger it recognises the car stereo (but doesn't set to "wireless stereo" and automatically loads up my media player
My search continues
EDIT: Ok found that once the initial partnership for wireless stereo is done, if I turn off the radio and turn it back on again, the partnership is lost as usual until I press channel 6 (pause) on my head unit and then it comes back on.
So, I have a new Toyota Avalon with built-in bluetooth. Was wondering if anyone knew of hacks, tricks, tweaks - software or hardware - to permit a2dp to show up when connected through bluetooth. It says HANDSFREE but doesn't show WIRELESS STEREO on my ATT TILT (stock rom).
Anyway to do this?
Also, for anyone with a Toyota and bluetooth, is there any way to get Microsoft Voice Command activated from the steering wheel? On all my external car bluetooth speakers, hitting the call button activates Voice Command. Doesn't do it with the built-in Toyota system...unless I am overlooking something.
BUMP....
Is there someone on the forum with a Toyota and bluetooth?
I am bummed about this...the only way I can stream or play audio is use the AUX jack which is fine EXCEPT it means that the phone cannot be used via the built-in blue tooth...the other party can be heard by the car microphones don't pick up my voice (presumably because the AUX connector somehow hijacks it???!!)
Any help would be appreciated.
freddiemac1 said:
It says HANDSFREE but doesn't show WIRELESS STEREO on my ATT TILT (stock rom).
Click to expand...
Click to collapse
That's what would happen if the car's BT did not support A2DP. My guess would be that your car only supports handsfree.
I'm in the same boat. I have an '07 Sienna and I have been looking for a way to connect AD2P bluetooth. So far, I'm having no luck.
I've thought about mounting my i.tech clip inside the dash to the Aux input. That means I'd have to modify the i.tech to work when power is connected. I would also have figure out a way to use the Aux port directly (with another device) if I wish. It is always something...
The '09 Toyota's support the AD2P.
works for me
so, I am in a '10 toyota. When I get into the car, it will pair up as handsfree, but does not show AD2P initially. For me at least, if I go to the BT tab on the audio screen, and press and hold the play button, it will start playing from the last playlist I was using. The steering wheel seek up seek down work to skip forward and back.
The first time I needed to initiate some music playing on the phone, and then tell the car to connect bluetooth through the BT tab on the audio menu, I think it hides the AD2P unless the phone requests it, and treats it separately from the handsfree connection.
I wish you luck- for short trips, it is great to be able to just sit down in the car, and have the radio play my mp3s without having to muck with my phone or cables.
I upgraded to the Moto-X for the touchless controls as I commute to work and back on my motorbike and I was really unsatisfied with alternatives floating around to simulate touchless control.
Now when I am in my car and using my bluetooth headset the voice control works just fine, I can navigate, call and send quick messages no problem
But on my bike I use a Viper RSv-131 helmet which has bluetooth built in and I listen to local radio or music whilst I'm riding but my Moto-X does not respond when I cay Ok Google now or when I press the button on my helmet either I can answer incoming calls fine but thats it.
Does anyone else use a Moto-X on a motorcycle/motorbike or even a regular bicycle with bluetooth and do you have similar problems?
Have you tried Google>Settings>Voice>Bluetooth headset
Solutions Etcetera said:
Have you tried Google>Settings>Voice>Bluetooth headset
Click to expand...
Click to collapse
Thanks Etcetra, I have bluetooth headset option turned on and it works using my BT headset in the car.
My gut reaction is my car headset is a regular over the ear BT headset but my helmet is like BT stereo headphones with a microphone and so I think it's a different kind of BT but I'm not an expert.
Any advice would be welcome
Check to see which profiles are connected on each device by going into Bluetooth settings and tapping the little settings icon next to the connection.
My helmet comes up as BLINK II and is ticked for phone and media audio
dr_strangetrick said:
My helmet comes up as BLINK II and is ticked for phone and media audio
Click to expand...
Click to collapse
That's unfortunate as it suggests an incompatibility issue between the two. It should certainly work using the phone profile.
Check with the helmet maker... maybe they have a firmware update available.
Turned off media audio and just tried phone audio but still the same: (