Ugly sound from my i.tech r35 - 8125, K-JAM, P4300, MDA Vario Software Upgrading

upgreading to 2.8.7 last night, go to buy an itech r35 stereo bt headset this morning...... and..... bad sound comes from my earphone when i open wmp and play mp3...... :shock: ............which cost me 550 CNY

you're using the a2dp profile?
what exactly do you mean by ugly sound?
i have s35, too. but i haven't tried it with the a2dp yet.

I have the WWE A2DP rom loaded, I have a S38 and I have found that once paired it works but if you turn off the headset and turn it on it does not connect the stereo profile again, you have to go in to the bluetooth device and tap set bluetooth stereo audio to get it to work again.
Have you found this?

yea...same here...i have the itech BlueBAND...and everytime i turn it off, i have to reconnect it manually via the bluetooth settings.
anothing thing is...sometimes my music gets cut for a few seconds and it comes back....this happens when i dont use a sim card (PDA only mode)...anyone else found this?

niver2002 said:
upgreading to 2.8.7 last night, go to buy an itech r35 stereo bt headset this morning...... and..... bad sound comes from my earphone when i open wmp and play mp3...... :shock: ............which cost me 550 CNY
Click to expand...
Click to collapse
Which city did you buy the R35 in China?

mack said:
yea...same here...i have the itech BlueBAND...and everytime i turn it off, i have to reconnect it manually via the bluetooth settings.
anothing thing is...sometimes my music gets cut for a few seconds and it comes back....this happens when i dont use a sim card (PDA only mode)...anyone else found this?
Click to expand...
Click to collapse
using the motorola ht820 headphones connect as soon as i switch on the headset, the headphones make a low quality sound then a nice quality sound as the bluetooth streaming is found. no need to re-pair.
i have noticed a loss of sound sometimes, but this seems to coincide with other people near me on the train turning on their phones.

hmm...guess its an Itech thing. Hope it get works out by the final release. I love the earbuds, or we will be looking for the motorola.

I have the same problem (sound being cut) with Anycom BSH-100 stereo headset. To my amazement, I found out that I can cut down these disturbances if I place the phone on my sleeve instead of on the belt. Also, it happens much less when I'm static - as opposed to riding my bicycle (for which I bought the BT headset in the first place). I'd love to find out who's the culprit - whether the headset, the RF in the K-Jam - or the software (in which case there's hope for an improvement).

I have the same problem (sound being cut) with Anycom BSH-100 stereo headset. To my amazement, I found out that I can cut down these disturbances if I place the phone on my sleeve instead of on the belt. Also, it happens much less when I'm static - as opposed to riding my bicycle (for which I bought the BT headset in the first place). I'd love to find out who's the culprit - whether the headset, the RF in the K-Jam - or the software (in which case there's hope for an improvement).

where did you download the profile for 838/9100?
my device can't work with s35, so my s35 has to stay in a side.

Related

Best Compatible Bluetooth Headset for Advantage

Can you recommend the best bluetooth headset for the HTC Advantage? Im getting confused with so many options out there. Jawbone, Jabra, Blueant?
kendedel said:
Can you recommend the best bluetooth headset for the HTC Advantage? Im getting confused with so many options out there. Jawbone, Jabra, Blueant?
Click to expand...
Click to collapse
i'm using an r35 itech headset. has ad2p, you can change the headset to plug in more quality cans (uses a 3.5mm jack), there's a buzzer that can be enabled when a call comes through. take note, this is a clip-type headset. which means the "body" is clipped to my collar while there's a wire which leads to the earpiece. i like it because i don't have anything dangling in my ear all the time.
others like the jabra have features like caller id, a2dp, etc.
cheers
Thank you for the suggestion. Ill look into it. God bless
kendedel said:
Thank you for the suggestion. Ill look into it. God bless
Click to expand...
Click to collapse
I have both Jabra BT8010 and i.Tech Clip D. I myself would recommend Jabra for using with Advantage.
I have a Jabra 8010 and now I like it. Initial results were poor but not because of the Jabra. The problems were regristery settings and I suspect they affected most blue tooth headsets.
jabra 8010 promblem with athena
i used this jabra and is very bad ..i throw it away and now i use nokia BH 900.and is very good on the athena.ok you dont have the dialing mode from this headset but you have the voice dialing and voice is very clean.
I tried the Jabra for a while and still use it for stereo, but for everyday use, I'm back to my BlueAnt V12. The V12 has vibrate feature and shows incoming numbers (not names). It is working well for me. Keeps a good connection, great range, voice dial works reliably. I can hear people and they can hear me. That's the main things I want.
IMHO, the Jabra is better in theory than in practice. Biggest deal breaker for me was that all audio seemed to go to the headset, with no audible alarms or ringtones. Since I only put it on when I need it, this wasn't so great for me. It you wear it 20/7 (allowing four hours for sleep) I think it would be OK.
I'm using the simple HTC M100.
Everything goes OK. Only problem I got is because I have beard and when touch the microphone of the M100 they hear terrible noise in the other end.
Two solutions: a) Peel my face or b) Change to other headset that avoid the problem.
The HTC M100 is cheap and reliable anyway.
You use regular headphones by the 3.5 headphone jack often? How is the sound qualty of the X7500? Ive heard its pretty bad but Ive also heard it depends on what player you use? How do you connect a BT headset and a regular pair of headphones at the same time? Ive read so much info about the X7500 now so Im a bit confused
Robson said:
i'm using an r35 itech headset. has ad2p, you can change the headset to plug in more quality cans (uses a 3.5mm jack), there's a buzzer that can be enabled when a call comes through. take note, this is a clip-type headset. which means the "body" is clipped to my collar while there's a wire which leads to the earpiece. i like it because i don't have anything dangling in my ear all the time.
others like the jabra have features like caller id, a2dp, etc.
cheers
Click to expand...
Click to collapse
hobs0n said:
You use regular headphones by the 3.5 headphone jack often? How is the sound qualty of the X7500? Ive heard its pretty bad but Ive also heard it depends on what player you use? How do you connect a BT headset and a regular pair of headphones at the same time? Ive read so much info about the X7500 now so Im a bit confused
Click to expand...
Click to collapse
nope, i hardly plug anything in the 3.5 jack of my u1000. my bluetooth is turned on like 24 hours a day =)
what i do is my itech r35 is bonded with my u1000. the setting is only for hands free...meaning when a call comes in i then answer it using the r35. i have another bt headset: jabra...and i forgot the model...but basically it's the same as the r35 (interchangeable headsets). that unit is bonded to my u1000 for music. i leave the jabra in my car as it's connected to the car stereo. so, whenever i'm in the car i can then listen to my soundz anytime. when a call comes through, the music pauses. i then answer the call using my r35.
when i'm not in the car, i can set the r35 for both handsfree and stereo....if i want to listen to my tunez that is.
even if you have a headset bonded to your unit, you can still plug in a 3.5mm jack headphone. what happens is the music will be played. if there's a call, it goes through your bonded headset. the music will simply pause...once your call is done the music resumes. unless you set your headset for hands free AND a2dp stereo, plugging in a 3.5mm headphone will not be a problem.
sound is not bad at all. i mean we're not talking about having bang and olfusen quality here =) but the soundz coming out of my r35 or the jabra are quite good. coupled with the car speakers, there you go. i use the regular media player and i've installed the skin with large keys for easy control.
cheers and i hope that doesn't add to your confusion =)
Go for a Style-i !! Then in car use the headphones on it - works great, and you can use it to make callls during the day too when not in the car - and you dont look like a knob talking to yourself like you do with an earpiece on!
Robson said:
nope, i hardly plug anything in the 3.5 jack of my u1000. my bluetooth is turned on like 24 hours a day =)
what i do is my itech r35 is bonded with my u1000. the setting is only for hands free...meaning when a call comes in i then answer it using the r35. i have another bt headset: jabra...and i forgot the model...but basically it's the same as the r35 (interchangeable headsets). that unit is bonded to my u1000 for music. i leave the jabra in my car as it's connected to the car stereo. so, whenever i'm in the car i can then listen to my soundz anytime. when a call comes through, the music pauses. i then answer the call using my r35.
when i'm not in the car, i can set the r35 for both handsfree and stereo....if i want to listen to my tunez that is.
even if you have a headset bonded to your unit, you can still plug in a 3.5mm jack headphone. what happens is the music will be played. if there's a call, it goes through your bonded headset. the music will simply pause...once your call is done the music resumes. unless you set your headset for hands free AND a2dp stereo, plugging in a 3.5mm headphone will not be a problem.
sound is not bad at all. i mean we're not talking about having bang and olfusen quality here =) but the soundz coming out of my r35 or the jabra are quite good. coupled with the car speakers, there you go. i use the regular media player and i've installed the skin with large keys for easy control.
cheers and i hope that doesn't add to your confusion =)
Click to expand...
Click to collapse
Spank thee for ze good explanation :up:
Now I know how it works, I long for the X7500 even more..
Style-i and Jabra connected simultaneously?
cayotte said:
I have both Jabra BT8010 and i.Tech Clip D. I myself would recommend Jabra for using with Advantage.
Click to expand...
Click to collapse
I don't own the Advantage. Can you keep both the Style-i and a BT headset connected simultaneously?
Thanks
kendedel said:
Can you recommend the best bluetooth headset for the HTC Advantage? Im getting confused with so many options out there. Jawbone, Jabra, Blueant?
Click to expand...
Click to collapse
My HTC is far more than simply a phone for me - it is an indispensable productivity component for my business. In particular, I'm addicted to Microsoft Voice Command - and use it heavily to announce my daily appointments and upcoming events. While the style-i seems quite compelling, I don't see it as a hands-free device. I need to look like a "knob" as I've trained myself to listen to announcements from my PDA such as "Meeting with Mr. Smith in 10 minutes" or "Mr. Smith calling on mobile" during face-to-face conversations while not going through all the fumbling, grabbing and excusing myself I would have to do without a hands free bluetooth device. For a busy person like me, the "whisper in the ear" aspect of hands free bluetooth is incredible - even if I do look like Lt. Uhura.
So, I need the following from my bluetooth device:
1) best sound possible
2) complete functionality with MS Voice Command
I have been using the Jawbone now for about two months and I am utterly, completely thrilled. Granted, it took some registry hacks to get the HTC to only accept voice input from the Jawbone and also to only output to the Jawbone (I am a user, not a developer) but it now works flawlessly. I cannot recommend it enough.
Many people complain that the buttons on the Jawbone are "mushy". I think the problem is that users simply take one of the stock earpieces and put on the Jawbone. I certainly did at first and found the volume too low, the Jawbone very uncomfortable and the buttons incredibly mushy. I then spent over an hour trying the different earpieces and earbuds provided, bending the earpiece I preferred until the earbud finally fit snugly and comfortably in my ear. Suddenly, the sound quality was fantastic (I had to turn down the volume - a first for me), I couldn't even feel the Jawbone and the buttons felt far more crisp.
I use it with a Sony Ericsson HBH 662. It has a small display for the number. I especially love the great sound. Works really well with voice dial. Even in the car.
desweds said:
My HTC is far more than simply a phone for me - the "whisper in the ear" aspect of hands free bluetooth is incredible - even if I do look like Lt. Uhura.
So, I need the following from my bluetooth device:
1) best sound possible
2) complete functionality with MS Voice Command
I have been using the Jawbone now for about two months and I am utterly, completely thrilled. Granted, it took some registry hacks to get the HTC to only accept voice input from the Jawbone and also to only output to the Jawbone (I am a user, not a developer) but it now works flawlessly. I cannot recommend it enough.
Click to expand...
Click to collapse
Hi desweds, excited to read about your finding. Wish to have a bluetooth earpiece able to go with MS Voice Command, may I know which earpiece you can recommend other than the Jawbone. Thanks.
desweds said:
My HTC is far more than simply a phone for me - it is an indispensable productivity component for my business. In particular, I'm addicted to Microsoft Voice Command - and use it heavily to announce my daily appointments and upcoming events. While the style-i seems quite compelling, I don't see it as a hands-free device. I need to look like a "knob" as I've trained myself to listen to announcements from my PDA such as "Meeting with Mr. Smith in 10 minutes" or "Mr. Smith calling on mobile" during face-to-face conversations while not going through all the fumbling, grabbing and excusing myself I would have to do without a hands free bluetooth device. For a busy person like me, the "whisper in the ear" aspect of hands free bluetooth is incredible - even if I do look like Lt. Uhura.
So, I need the following from my bluetooth device:
1) best sound possible
2) complete functionality with MS Voice Command
I have been using the Jawbone now for about two months and I am utterly, completely thrilled. Granted, it took some registry hacks to get the HTC to only accept voice input from the Jawbone and also to only output to the Jawbone (I am a user, not a developer) but it now works flawlessly. I cannot recommend it enough.
Many people complain that the buttons on the Jawbone are "mushy". I think the problem is that users simply take one of the stock earpieces and put on the Jawbone. I certainly did at first and found the volume too low, the Jawbone very uncomfortable and the buttons incredibly mushy. I then spent over an hour trying the different earpieces and earbuds provided, bending the earpiece I preferred until the earbud finally fit snugly and comfortably in my ear. Suddenly, the sound quality was fantastic (I had to turn down the volume - a first for me), I couldn't even feel the Jawbone and the buttons felt far more crisp.
Click to expand...
Click to collapse
What earpieces did you choose that worked well?
Style-i
adamelphick said:
Go for a Style-i !! Then in car use the headphones on it - works great, and you can use it to make callls during the day too when not in the car - and you dont look like a knob talking to yourself like you do with an earpiece on!
Click to expand...
Click to collapse
I agree!! Style-i is fantastic... it does drop calls sometimes, but all you have to do is quickly go into Comm Manager, re-activate bluetooth and press the call button on the style I and you're back... takes seconds... and only happens to me once every couple of weeks if that!
It's crystal clear both ends, easy to use, and has a dial pad on the device! 9/10!
desweds said:
My HTC is far more than simply a phone for me - it is an indispensable productivity component for my business. In particular, I'm addicted to Microsoft Voice Command - and use it heavily to announce my daily appointments and upcoming events. While the style-i seems quite compelling, I don't see it as a hands-free device. I need to look like a "knob" as I've trained myself to listen to announcements from my PDA such as "Meeting with Mr. Smith in 10 minutes" or "Mr. Smith calling on mobile" during face-to-face conversations while not going through all the fumbling, grabbing and excusing myself I would have to do without a hands free bluetooth device. For a busy person like me, the "whisper in the ear" aspect of hands free bluetooth is incredible - even if I do look like Lt. Uhura.
So, I need the following from my bluetooth device:
1) best sound possible
2) complete functionality with MS Voice Command
I have been using the Jawbone now for about two months and I am utterly, completely thrilled. Granted, it took some registry hacks to get the HTC to only accept voice input from the Jawbone and also to only output to the Jawbone (I am a user, not a developer) but it now works flawlessly. I cannot recommend it enough.
Many people complain that the buttons on the Jawbone are "mushy". I think the problem is that users simply take one of the stock earpieces and put on the Jawbone. I certainly did at first and found the volume too low, the Jawbone very uncomfortable and the buttons incredibly mushy. I then spent over an hour trying the different earpieces and earbuds provided, bending the earpiece I preferred until the earbud finally fit snugly and comfortably in my ear. Suddenly, the sound quality was fantastic (I had to turn down the volume - a first for me), I couldn't even feel the Jawbone and the buttons felt far more crisp.
Click to expand...
Click to collapse
OK, after reading this I ordered a Jawbone. It's fantastic. I've spent ages already phoning myself while doing the vacuum cleaning.
Anyway, I was wondering if you have any pointers for:
1) Microsoft Voice Command - Is it necessary to purchase this or is it included in the ROM? And what version do you recommend
2) Registry settings needed to get VoiceCommand working as you described
Thanks for any help
I just bought a Sennheiser VMX 100 bluetooth headset for use with my Dopod U1000. A very good one in term of audio quality on both ends.
The problem is that it keeps disconnected after several calls. Anybody knows how to fix this?

Reviews for Best Bluetooth for Touch

Just received my Sony Ericsson HBH-DS980 Stereo Bluetooth Headset. It's being charged up right now. I'll let everyone know hows the sound quality tonight.
Paid: 99.99 + 5.95 Shipping = 105.94
Edited: Here is what i have experienced with this unit.
Here are the Specs: http://www.sonyericsson.com/cws/products/accessories/overview/hbh-ds980?cc=&lc=
Sound: Great Clarity and rich Bass( Sounds like your in a car thats equipped with Sound System)
Range: Since it is Bluetooth Version 2.0 , it has better range than any other bluetooth headset Version 1.2. ( My previous Stereo Bluetooth by LG HBS-110 was V1.2. While listening to music, it got cut off when i went into another room, and came back on when it was in line of sight.) On the Sony Ericsson, it was cutting off a little bit but not completely off, and can go farther than like the LG)
so far thats with the Music portion. Still have to play around with it more to see whats great about it.
Mind me asking where you ordered your ds980 from?
munchies000 said:
Mind me asking where you ordered your ds980 from?
Click to expand...
Click to collapse
Munchies, I ordered it from http://mobilecityonline.com They are located in NY
I ordered it on 12/11/07 at night and it got here 12/14/07 in the afternoon. I choose their cheapest shipping, but it got here faster than it was scheduled.
cool, thanks. Let me know how they sound with the touch as I was thinking getting a pair or the blueant z9.
i bougth the DS970.. waiting for it in mail!Z
teh DS970 works great. I got voice control working, Music plays sharp (almost as good as my bose headphones, and i got great range and the earbuds are great.! My only problems is i cant get the LCD display to show caller ID. This is important and i would like it to show the name of the person calling, or at least there phone ##. Is there a program i can download for this? or what do i have to do for this to work. (BTW Voice command works greaT!S
ambush276 said:
teh DS970 works great. I got voice control working, Music plays sharp (almost as good as my bose headphones, and i got great range and the earbuds are great.! My only problems is i cant get the LCD display to show caller ID. This is important and i would like it to show the name of the person calling, or at least there phone ##. Is there a program i can download for this? or what do i have to do for this to work. (BTW Voice command works greaT!S
Click to expand...
Click to collapse
Did you get VC working with confirmations? No one else seems to have accomlished this. If you did , what is the trick?
Rob
I think Sony DR-BT Serie is better. Its more a Headset for Bluetooth MP3 Player. They have better DA-Converter inside. I use in the moment ... DR-BT50.
NetrunnerAT said:
I think Sony DR-BT Serie is better. Its more a Headset for Bluetooth MP3 Player. They have better DA-Converter inside. I use in the moment ... DR-BT50.
Click to expand...
Click to collapse
i've been using the Sony DR-BT10CX for the past few months and am very pleased with the sound quality i am receiving. i am having two major problems that i do not know how to fix:
1. every time i go to connect the headset to the phone, i have to go into the bluetooth settings, uncheck the boxes a) wireless stereo and b) headset, then save those changes. then i have to go back into the settings and re-check the boxes and save. - this is a nightmare of an issue, when the headset should simply connect automatically when turned on.
2. making calls is fine, but when a call is received it does not answer through the headset, but through the phone. pointless if you are driving for example...
if anyone knows how i can fix this, i'd love to hear a solution...
MBR-100 Sony/Ericson stereo receiver
I'm using the MBR-100 Sony/Ericson stereo receiver to stream music to me car stereo via 3.5mm input cable and to me earbuds when I am riding on my motorcycle. It connects quickly, sounds good and lasts about a week between charges. I only commute about an hour a day. I got it for $80 at Fry Electronics. I have seen a few of them ob ebay as well.
HT820 + Telus P3050 Touch
I have the Motorola HT820 on a Telus Touch P3050 Vogue and it is very good. I am pleased with my choice.
Sadly I must say stay away from the BlueAnt X5's...horrid sound quality. It seems that the sony's have good sound quality, at least as good as a wired buds that are included. The X5's are much worse. Less spatial seperation, more "muddy" sound, just not good.
Everything I've heard and read about the Jawbone BT headset says that it's a very high quality unit, with excellent noise reduction/cancellation properties. I'll be getting one when I save up some pennies. (10,000 pennies to go!)
i'm using the BlueAnt Z9 with the new 3.4 firmware update and, for me, it's loud and clear with the Vogue. i actually have to turn it down...i have not had any complaints from others when using the headset. when i purchased the Z9 it had the 3.0 firmware and the volume was very acceptable to me. also, the 3.0 firmware allowed you to control the volume with the phone. with the 3.4 firmware, all volume is controlled by the headset.
Jawbone
I have the black jawbone best bluetooth I have used thus far and I have tested quite a few. connects flawlesly and quickly as soon as you turn it on and the noise cancelation that the jawbone is famous for actualy works
I have an old wep150 (samsung) I got it for another phone about a year and a half ago. Its sounds worse on the vogue than it did on my motorola phones. I hope to get a nice stero headset for listening to music and calls. I'm glad to hear the sound quality is good for these devices.
BT
I use the Jabra BT 5020 works awesome on my sprint (cdma) touch. Long life too.. I have always like the jabra products. You can also pair it with multiple devices. it has vibrate.
Timdawg
Just got the SE HBH-DS970 and it works pretty well. the call display only shows the number not the name unfortunetly. And My music tracks don't seem to show up on the screen. Any one else experience this?
I just got the new MOTOPURE H12 the other day and really like it. I got rid of the Jabra BT8010 because I felt like I had to yell into it. This new H12 is pricey at $129.00 but worth it because I am in the car alot. This thing is very small and very light. It comes with a cool desktop charger and carrying case that you can use as a charger also. Here is a link http://direct.motorola.com/hellomoto/h12/
Good question, CCRRAR!
Has anybody got a bluetooth to work with Voice Command??! The closest I've gotten has been with the Blue Ant Z9, I manage a RadioShack, and we just started carrying that unit. It is small, lightweight, comfortable, and very good volume. Better than almost any Motorola bluetooth re: volume. The plantronics are good volume as well, but a bit bulkier. But the Blue Ant actually recognizes Voice Command! The problem, like most, is it doesn't recognize the confirmation.
Very Frustrating!
Anyone found a fix? I've tried some that profess to be the "true fix" but no luck.
GT

TomTom7 and Car Holder -No Sound!!?

Hi all!
I have TomTom7 installed which is working fine (almost).
When I place my Diamond in the car holder (three way output w. USB-Charge/USB-Headphones/3,5mm Headphone) all sounds from my phone are muted (believed to be connected to a headphone I guess).
I could connect the phone to the car audio system via a 3,5 mm audio plug, but then I cannot listen to the radio at the same time as navigating with TomTom.
Is there any known way to solve this so the TomTom7 directions and warnings are always routed through the Diamond internal speaker?
groover71 said:
Hi all!
I have TomTom7 installed which is working fine (almost).
When I place my Diamond in the car holder (three way output w. USB-Charge/USB-Headphones/3,5mm Headphone) all sounds from my phone are muted (believed to be connected to a headphone I guess).
I could connect the phone to the car audio system via a 3,5 mm audio plug, but then I cannot listen to the radio at the same time as navigating with TomTom.
Is there any known way to solve this so the TomTom7 directions and warnings are always routed through the Diamond internal speaker?
Click to expand...
Click to collapse
i have this carholder too, it's from brodit right? It's true, the moment you plug in the diamond it thinks it's connected to a headset, so no sound from internal speaker. Ideal for listening to music when connected to your car stereo ofcourse, but when receiving a call you have to take out the diamond, because the sound goes through the car speakers (if the output is connected to your car stereo ofcourse) but you can't talk back because diamonds mic is also muted! I hope there is a way to solve this. Maybe a little program that allows you to direct sound and mic settings?
It's also a similar problem with the little USB to 3.5mm audio adapters, they make the diamond think there is a mic plugged in when there isn't and when someone calls you while you're listening to music, they cant hear you unless you unplug the headphones.
I've also noticed that when the diamond is in my car and connected to my bluetooth kit, the calls come via bluetooth but TomTom does not, this particularly annoys me, as when I'm listening to loud music I miss the speed camera alerts and also obviously cant hear the voice directions.
There seem to be some fairly serious shortcomings in this area. A simple set of options that let the user choose what he/she likes would be best.
Yepp Glenner, it is a Brodit car holder!
A program to solve this as you mention would be great!
Anyone got the skills to solve this?
Yesterday driving home from my work I noticed that the ring tone on an incoming call was heard even when the phone was placed in the holder...
So there must be a way to have the sound re-directed to the internal speaker???
Solved!
Try this little program http://www.freewarepocketpc.net/ppc-download-btmusic.html It sends audio from you diamond to either BT headphone or speaker. Just tried it and seems to work fine, but does need .netCF 2.
Best of luck!
Hi, this BT music doesn't seem to work with my car kit... My car kit supports HFP profile (Handsfree profile)...
What did you do exactly to make it work?
eadon said:
Try this little program http://www.freewarepocketpc.net/ppc-download-btmusic.html It sends audio from you diamond to either BT headphone or speaker. Just tried it and seems to work fine, but does need .netCF 2.
Best of luck!
Click to expand...
Click to collapse
if you rename btmusic.exe.config (not btmusic.exe!!) you can run it too with .NET CF 3.5
Trick i learned from the developer of BTMusic.
xavalon said:
if you rename btmusic.exe.config (not btmusic.exe!!) you can run it too with .NET CF 3.5
Trick i learned from the developer of BTMusic.
Click to expand...
Click to collapse
Rename to what?
I figured it out. Renaming btmusic.exe.config to btmusic.exe.configx does it.

A2DP problem using sony BLUETOOTH headset

Morning All !!
Currently i have the HTC fuze (AT&T) aka Diamond. I just purchase the sony bluetooth headset DR-BT160AS. I have tried everyway possible i can think of to get more sound out of these headphones. It sound like im listening to music threw a bottle next door in MONO. I tryed adjusting the preset ( audio booster) with the help of tweaksdiamond. Nothing but here the knock why is it when i have the audio adapter plug into the phone i can get great sound and adjust the presets, But threw the bluetooth i get mono sound with no adjustments. Its pairs wirless headset, hands free, it work the fucntions of changing the track and adjusting volume and i can recive calls.... but with poor sound.
programs used :
blue audio
tweaksdiamond
Has anyone had this issue using wirless bluetooth stereo headsets w/a2dp enabled.
@LPHAR56 -aka- do you hear me now "HELL NO!"
I have a pair of Sony DR-BT140Q and they work/sound really great every time. They're not the same kind, but maybe yours are defective?
Try pairing it with a laptop or any other device to see if you get the same results
thanks i try to do it with a laptop. if i can see if it just my pair having issues.. just can figure out the issue

Anyone use Moto-X on a motorbike

I upgraded to the Moto-X for the touchless controls as I commute to work and back on my motorbike and I was really unsatisfied with alternatives floating around to simulate touchless control.
Now when I am in my car and using my bluetooth headset the voice control works just fine, I can navigate, call and send quick messages no problem
But on my bike I use a Viper RSv-131 helmet which has bluetooth built in and I listen to local radio or music whilst I'm riding but my Moto-X does not respond when I cay Ok Google now or when I press the button on my helmet either I can answer incoming calls fine but thats it.
Does anyone else use a Moto-X on a motorcycle/motorbike or even a regular bicycle with bluetooth and do you have similar problems?
Have you tried Google>Settings>Voice>Bluetooth headset
Solutions Etcetera said:
Have you tried Google>Settings>Voice>Bluetooth headset
Click to expand...
Click to collapse
Thanks Etcetra, I have bluetooth headset option turned on and it works using my BT headset in the car.
My gut reaction is my car headset is a regular over the ear BT headset but my helmet is like BT stereo headphones with a microphone and so I think it's a different kind of BT but I'm not an expert.
Any advice would be welcome
Check to see which profiles are connected on each device by going into Bluetooth settings and tapping the little settings icon next to the connection.
My helmet comes up as BLINK II and is ticked for phone and media audio
dr_strangetrick said:
My helmet comes up as BLINK II and is ticked for phone and media audio
Click to expand...
Click to collapse
That's unfortunate as it suggests an incompatibility issue between the two. It should certainly work using the phone profile.
Check with the helmet maker... maybe they have a firmware update available.
Turned off media audio and just tried phone audio but still the same: (

Categories

Resources