Database Develop

Siemens SX66 ROM Update Issue

I have a Siemens SX66 Cingular branded PPC. I downloaded the latest Official ROM Update but get the Wrong Country ID error. I found out that this was due my phone being an AT&T varient even though the phone says Cingular. So I wanted to know is anyone has the original ROM update that came out before the Siemens-1.33.10-Full_Update and if so could provide it to me thank you in advance. I need to put an offical rom back on my phone so I can send it back to cingular so they can send me a replacement phone.

Go to the SX66 Standardization Project to get the most recent ROMs for the SX66; they have both Cingular & ATT versions.

I went there but it's not an official version number which cingular will check for.

hakushox said:
I went there but it's not an official version number which cingular will check for.
Click to expand...
Click to collapse
Try following the instructions here:
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_Upgrade_Errors
You will need to run the upgrade a second time for it to install, the first time clears the previous contents, the second time the upgrade should run.

That wont work already tried that. Thankz for the resond though. BTW how do you like that new wizard OS on your sx66?

hakushox said:
That wont work already tried that. Thankz for the resond though. BTW how do you like that new wizard OS on your sx66?
Click to expand...
Click to collapse
Did you edit the .conf file as outlined in step 4? This worked for me. You may also try the MaUpgradeUt_noID route as well.
I prefer WM 2005 over 2003 I'm willing to work with the warts and try to advance the ball

Ya it gets rid of that error but then i get a error in the checksum

hakushox said:
Ya it gets rid of that error but then i get a error in the checksum
Click to expand...
Click to collapse
go back and make sure you have edited the editfix.bat file correctly, there is a set of three lines to recalculate the checksum and update it for each of the nba files (xda3nbftool -c -u ?????.nba).

hakushox,
The only way to get back to an officially supported ROM on the AT&T variant of the SX66 is with the MaUpgradeUt_noID. Now, I have not tried this, but here is what you'd need to do. Download the official Siemens update for the 1.33.10 System, and launch it. Once the first screen screen appears, open the Windows File Explorer, and search for nk.nbf. The one you are looking for will exist in a temp directory, and will exist with ms_.nbf, and radio_.nbf. Copy these files to a easy to find directory as these are the files you'll need to do the downgrade with. Cancel the offcial upgrade tool. Now, download the MaUpgradeUt_noID tools from this site, and extract it to a directory on your computer. Copy the .nbf files into that directory. Now, place your phone into boot loader mode, and place it in the cradle. Wait a few minutes for the OS to detect the "new" sync device. Finally launch the MaUpgradeUt_noID tool, and step through the screens. Once completed, it will place System 1.33.10, Radio 1.06.02, and Extended 1.33.110 ROMs on your device.
This works because the MaUpgradeUt_noID tool does check the ROM ids, and will let you flash any IDed rom onto your phone. As you can imagine, it is a rather dangerous tool if you don't have a good idea what you are doing, which is why I have tried to get it away from the Standardization project.
-Chris

Worked like a charm much thanks

Excellent!
-Chris

I tried uploading the original SX66 Cingular rom to the FTP but for some reason its not responding, if some one wants it email me and I will send it.

SysCrasher13 -
I am interested in downloading the factory Siemens SX66 firmware, after upgrading the firmware my SD slot no longer recognizes SD Memory... very strange.
Please let me know where to download the factory firmware.
Note: I have (2) SD PNY cards that work fine in my PPC4100, however, my SX66 doesn't recognize either card and wondering if this maybe a compatibility issue. I'm going to swap the 512MB with a SANdisk tomorrow to see if this rectifies the problem. Can anyone confirm SD compatibility issues with the SX66 --- is there a SD Memory quick reference chart available for the SX66?
Mike

Let me know if anybody has any ideas before I send it in for repairs...
Thanks - Mike

Discovery? I think I found an easy way to upgrade ROMS

Hey guys, I'm new to this side of the forums. Just bought a Treo 750 and I think I like better than my old Hermes.
Anyways, I didn't have a MicroSD card adapter to format my card, so I did a little bit of risk taking and decided to flash my ROM any way I could (I'm impatient). What I did was take the custom RUU updater from the Patcher/Unlocker and upgraded using that. I'm not sure if this is already posted somewhere, and I didn't see it, but I think its pretty cool and easier than formating an SD card every time you need to upgrade ROMS.
Here is what I did.
Find the ROM I wanted
http://palmone.r3h.net/downloads.palm.com/Treo750_2_23_ROW_EN_DesktopUpdater.zip
Having 7-zip installed, I decompressed the File and found CHEEIMG_FW.nbh
I then renamed that to: CHEEIMG_FW.nbh
I made a new folder and put the RUUWrapper and CHEEIMG_FW.nbh into the same folder.
finally, I just hit all the buttons and checked all the boxes to upgrade my ROM.
Now, I have windows Mobile 6.0 (from 5.0) on my Treo.
I am thinking that I can do this to the Radio also, but I'm a little scared to try it. If anyone is brave to tested and tell me, I'd really appreciate it.
I have attached the RUUWrapper that the Cheetah Patcher/Unlocker comes with. Obviously I didn't really make anything.
If this has already been posted, Just delete this thread...Just trying to bring new in site.

tested now on treo 750v with spanish language
Just work great and have english lang now and win mobile 6!
flash only OS CHEEIMG_FW.nbh
great discovery!
best regards
vali

cd85233 said:
...clip..
I decompressed the File and found CHEEIMG_FW.nbh
I then renamed that to: CHEEIMG_FW.nbh
Click to expand...
Click to collapse
Not sure if the above is a Typo.
You said you renamed CHEEIMG_FW.nbh to CHEEIMG_FW.nbh
Same Name?

valibuzauro said:
tested now on treo 750v with spanish language
Just work great and have english lang now and win mobile 6!
flash only OS CHEEIMG_FW.nbh
great discovery!
best regards
vali
Click to expand...
Click to collapse
So is this only updated OS and not the Radio?

Wow, sorry...
What I meant was name the file CheetahPatched.nbh
I don't know if it matters what name it is, aslong as its in the folder it might work.
But, if that doesnt work, just name the rom to CheetahPatched.nbh
I don't know if the Radio Rom will be upgraded as well, but I guess you could be brave and try it.

Since my last post I went ahead and tried it.
Everything went smoothly.
Radio did infact show a newer version 1.54.01.
But,.....
It could just be something I did wrong on my end, but the SW still was 1.13 CNG.
So I went ahead and flashed the Official ATT 2.25, and then it still said 1.13 CNG.
Finally, I flashed the RWE the normal way (editing the payloads.xml) and now everything shows the correct Sw & Fw.
So I may have just had an isolated issue.
If another person comes along and gives your flashing method a run and everything updates correctly, then I will be convinced it was just my isolated issue.
Thanks either way.
Berd

Mine says 1.13ATT...I really don't know much about the Treo Phone, since I moved froma Hermes, so I don't know what that really means lol.

I believe you need to run "UpdInfo.CAB" extracted from the updater version to get the ROM version to read correctly...

berdinkerdickle said:
Finally, I flashed the RWE the normal way (editing the payloads.xml) and now everything shows the correct Sw & Fw.
So I may have just had an isolated issue.
Click to expand...
Click to collapse
Please HOW TO???
I trying edit payloads.xml from this guide: http://forum.xda-developers.com/showthread.php?t=345531 and above run PalmDesktopUpdater,not working/connect errot/nothing flash....Sw & Fw in T750 /Setting/About NOT VIEW Correctly
This same with PalmSD Updater...not work.
I used WM6 Treo750_2_27_ROW_EN flashed on my device Sw & Fw is still not view correctly
I tryinng UpdInfo.cab and this same......version is "ooooooooooooooooooo"

Thanks cd85233.
Updated for windows mobile 6 Spanish, and gave it perfectly ..

cd85233 said:
Wow, sorry...
What I meant was name the file CheetahPatched.nbh
I don't know if it matters what name it is, aslong as its in the folder it might work.
But, if that doesnt work, just name the rom to CheetahPatched.nbh
I don't know if the Radio Rom will be upgraded as well, but I guess you could be brave and try it.
Click to expand...
Click to collapse
I just tried this method to 'downgrade' my radio version. It went through all of the motions, and then ended up not having changed it at all.
Never mind - it was worth a try.
I haven't tried using this method for upgrades of radio though, so it'll be good to find out if it works for that..

Hope it works out for you, if you need a SD card, I think buy.com has a 4 gig for 15 bucks right now, free shipping. that way you can upgrade the normal way.

Mouse2007 said:
Please HOW TO???
I trying edit payloads.xml from this guide: http://forum.xda-developers.com/showthread.php?t=345531 and above run PalmDesktopUpdater,not working/connect errot/nothing flash....Sw & Fw in T750 /Setting/About NOT VIEW Correctly
This same with PalmSD Updater...not work.
I used WM6 Treo750_2_27_ROW_EN flashed on my device Sw & Fw is still not view correctly
I tryinng UpdInfo.cab and this same......version is "ooooooooooooooooooo"
Click to expand...
Click to collapse
I am so sorry,
I realize I never replied.
I'm going try and help trjons over at http://discussion.wmexperts.com/showthread.php?p=1493252#post1493252
If he has the same concern, I will post it over there.

Thanks dude
hey man thanks it does work
simple, download the RRU... and the FW.
run the exe
follow instructions
thats it.. cool

cd85233 said:
Hey guys, I'm new to this side of the forums. Just bought a Treo 750 and I think I like better than my old Hermes.
Anyways, I didn't have a MicroSD card adapter to format my card, so I did a little bit of risk taking and decided to flash my ROM any way I could (I'm impatient). What I did was take the custom RUU updater from the Patcher/Unlocker and upgraded using that. I'm not sure if this is already posted somewhere, and I didn't see it, but I think its pretty cool and easier than formating an SD card every time you need to upgrade ROMS.
Here is what I did.
Find the ROM I wanted
http://palmone.r3h.net/downloads.palm.com/Treo750_2_23_ROW_EN_DesktopUpdater.zip
Having 7-zip installed, I decompressed the File and found CHEEIMG_FW.nbh
I then renamed that to: CHEEIMG_FW.nbh
I made a new folder and put the RUUWrapper and CHEEIMG_FW.nbh into the same folder.
finally, I just hit all the buttons and checked all the boxes to upgrade my ROM.
Now, I have windows Mobile 6.0 (from 5.0) on my Treo.
I am thinking that I can do this to the Radio also, but I'm a little scared to try it. If anyone is brave to tested and tell me, I'd really appreciate it.
I have attached the RUUWrapper that the Cheetah Patcher/Unlocker comes with. Obviously I didn't really make anything.
If this has already been posted, Just delete this thread...Just trying to bring new in site.
Click to expand...
Click to collapse
Bro, You are a genius!!
Nothing else was working for me and I tried this as my last resort, and worked the first try. now im on 6.1!! thank you!!

Stuck in RED, GREEN, BLUE, WHITE screen

Hi. I already did a search for this but didn't find any help for a Herald.
I tried updating to 6.1 and it would not work. It would start to install but then crash and start over again. I probably tried 20 times and it would not work...not my phone is stuck on this screen with Red, Green, Blue and White stripes. Is my phone dead? Is there any hope? Thanks in advance!

This question is asked at least one or 5 times a week. Please search.
If your SPL still says 4.0.0.0, just flash another ROM. Assuming you have HardSPL setup or you were using USPL.
If your SPL says 1.0.0.0, then follow this.

Sorry like I already mentioned in my post I could not find a thread specifically for the Herald so I made a post.
My screen says IPL 4.26.0002 and then SPL 4.26.0000.

galva said:
Sorry like I already mentioned in my post I could not find a thread specifically for the Herald so I made a post.
My screen says IPL 4.26.0002 and then SPL 4.26.0000.
Click to expand...
Click to collapse
There's a million threads on this for the Herald.
Anyhoo, have you tried just reflashing back to the stock ROM or another ROM?
Tell me exactly what you did to flash.

Went to T-Mobile site. Typed in my phone's info and downloaded the 6.1 update for Windows Mobile...followed the instructions to install. It would start installing and then stop or crash I can't remember exactly. But I tried many times. I called T-Mobile and they said I had to get a new phone. I've never flashed my phone or anything like that...I had Spb installed on it and that was it...

Well I took out my ol Wing and tried to do the update once again to remember what error I keep getting.
The update starts to install on my Wing as the bar loading bar starts to fill it stops and then tells me an error has occurred.
ERROR [262]: UPDATE ERROR
Some type of communication error. But I can recover. So I do and then I try again. I've done this like 20 times before. I don't know if that helps any but thats my problem...

First, find hardspl and flash then flash rom

galva said:
Well I took out my ol Wing and tried to do the update once again to remember what error I keep getting.
The update starts to install on my Wing as the bar loading bar starts to fill it stops and then tells me an error has occurred.
ERROR [262]: UPDATE ERROR
Some type of communication error. But I can recover. So I do and then I try again. I've done this like 20 times before. I don't know if that helps any but thats my problem...
Click to expand...
Click to collapse
Sounds like there's a problem with your computer talking to the phone. Try taking tmobile's ROM, take out the NBH, rename it to HERAIMG.nbh and place it into your SD card (formatted to FAT32.) Then turn on your phone while holding the camera button.

galva said:
Went to T-Mobile site. Typed in my phone's info and downloaded the 6.1 update for Windows Mobile...followed the instructions to install. It would start installing and then stop or crash I can't remember exactly. But I tried many times. I called T-Mobile and they said I had to get a new phone. I've never flashed my phone or anything like that...I had Spb installed on it and that was it...
Click to expand...
Click to collapse
Tmobile has a 6.1 update?

galva, which windows do you use? XP or Vista?

igord said:
galva, which windows do you use? XP or Vista?
Click to expand...
Click to collapse
Wow guys thanks...I'll give these a try. I am using BootCamp to read my phone.
ivanmmj, do I need format the card using another phone or can I use a card reader. I don't have another phone I could use.

galva said:
Wow guys thanks...I'll give these a try. I am using BootCamp to read my phone.
ivanmmj, do I need format the card using another phone or can I use a card reader. I don't have another phone I could use.
Click to expand...
Click to collapse
You can use a card reader.
Smoke362 said:
Tmobile has a 6.1 update?
Click to expand...
Click to collapse
No. It's a 6.0 update.

I was updating from 6.0 to 6.1 and I am running XP in Bootcamp.

ivanmmj said:
Sounds like there's a problem with your computer talking to the phone. Try taking tmobile's ROM, take out the NBH, rename it to HERAIMG.nbh and place it into your SD card (formatted to FAT32.) Then turn on your phone while holding the camera button.
Click to expand...
Click to collapse
Wait...so I'm a noob...T-Mobile's ROM? Where do I get that? Do you mean the update file that I downloaded from T-Mobile? Thanks again!!! I hope this works! And will MS-DOS FAT work when I format the card? I am using Mac's Disk Utility and I don't get a FAT32 option.
Well I think I have the ROM actually. It's an EXE file so I'm not sure how I can go into it and rename a file inside of it. Sorry...my noob is showing huh? Here's what I downloaded awhile back that I think is the original ROM you are talking about.
RUU_Atlas_TMO_US_4[1].10.531.3_4.1.13.37_02.83.90_Ship.exe

IT WORKED! Thanks!!!!

galva said:
IT WORKED! Thanks!!!!
Click to expand...
Click to collapse
No problem. ^_^ Glad to hear that it worked. Were you able to flash it through a FAT format? Or were you able to format it to FAT32?

Xperia brainfart: Problems with flashing

So people around here sometimes get troubled with regular flashing that doesn't work anymore.
I'll explain my problem on this part:
I flashed to a new ROM just to find out that i didn't like the content so i wanted to flash back to TOUCH X.
I did the usual stuff to flash my phone with, Hardspl, then bootloader etc. etc.
PROBLEM!
Now all my phone seems to be doing is go into bootlader and start updating. However, after 3 seconds i get the message that the update is complete. My phone resets itself, and i found out that nothing has changed. I tried it a number of other times, without results.
Now my question is: is there any other way to do this, this is obviously not working!
post all your ideas here so other people can read this in case that they have the same problem!

Everytime you flash a ROM, you do not need to hardspl your device, only once...I would reformat your memory card,use a stock original rom and see if it will flash with that....usually the issue you are seeing is because the nbh file is not being read properly, make sure your nbh file is named correctly.I have had the issue earlier in my days where if I copied the nbh file through active sync something gets screwed in the transfer...used an external card reader and copied it to my memory card after formatting it and it went through....just some suggestions....Good Luck
Regards,
WC

didn't solve it at all.
More suggestions?

SyntheticDistortion said:
didn't solve it at all.
More suggestions?
Click to expand...
Click to collapse
seems to be your problem? ---> CLICK

Nope, didn't do anything..
Any other suggestions?
EDIT: Really a lot of thanks for anyone helping, i really would love to start flashing again!

grateful for the help arnt you..

try flashing the USB method, if it works its probably due to your memory card. (unless ur already using the usb method, then try the memory card method!)

How do i use the USB method exactly?
And really guys, thanks for all the feedback, maybe make this a sticky for future reference?

SyntheticDistortion said:
How do i use the USB method exactly?
And really guys, thanks for all the feedback, maybe make this a sticky for future reference?
Click to expand...
Click to collapse
well what you do is download the file attached to this post (it is available in one of the stickies but when i tried to download it, it failed so i zipped this one up for you)
extract the .exe within to where your nbh file is (not on xperia, on computer)
make sure there is no KOVSIMG.nbh on your memory card!
put your phone in bootloader (tricolour screen) and plug in via USB
run the custom_RUU.exe and follow the prompts pressing next etc.
you don't have to sync via activesync 1st like it says.
ignore the version number of the ROM just make sure your using the correct nbh and flash!

urm i think you should at least try to look at the stickies .........
this is very useful. i had problem flashing using micro sd so all my flashes are via usb.
http://forum.xda-developers.com/showthread.php?t=497511

That seemed to have done the trick people!
Thanks very much and keep up the good work!

Rom Problem With my X1

Hi`Guys
for the last few days im having an serious rom problem with my Sony Ericsson X1 sines i was looking for an good 6.5 rom that fits and works smooth with my X1 i found an cooked 6.5 rom belong to HD2 aka Leo2 and i reveiw it and i like it so i charged my phone to the full and unlock my phone using "HARDSPL Tool" after that i upgraded my phone with the new rom ,i like it at the first but after some times i faced alot of hangs and bugs within the rom besides the rom overload the processor that would make the phone runs slow so i had to place back my original rom so i used Sony Ericsson Update service "SEUS" to replace my current rom and when i runed the update it asked me to place back the stock SPL and i did and runed the update again but it said that i have he latest software update so i tryed to go all the way around and use the traditional way to downgrade my phone but here is the problem when ever i start the downgrade prosses it gives me update error number {[260] connection} the update stop and start the recovery prosses ,then i tryed to reunlock the phone but it gave me the same error ,so i tryed to get smart and i stop using the computer for the downgrading and moved to flashing methods farmatted my micro-sd to FAT32 placed the required nbh file named with Kovsimg but when i bootload my phone it stops at the loading part without going throw the checking prosses then done the same with the the SPL but the same it stick at the loading stage ,i start to get hopeless my last option was to use the MTTY Tool but it only formatted the rom without flashing the phone
so now im using 20% of my phone option to avoid bugs or hangs and my phone stick with bad 6.5 rom protacted with StockSPL that cant be changed
so guys any one faced the same problem ? plssss help i really feel like my phone its on handicap status
pls help me...

Try to install this:
http://forum.xda-developers.com/showthread.php?t=606799

drnjstj said:
Try to install this:
http://forum.xda-developers.com/showthread.php?t=606799
Click to expand...
Click to collapse
im not looking for a rom i want to release my phone from it hanging in rom updating it stops at 0% when i use the computer and at the loading screen when i use the micro-sd
but thanks for ur help anyways

error_man said:
im not looking for a rom i want to release my phone from it hanging in rom updating it stops at 0% when i use the computer and at the loading screen when i use the micro-sd
but thanks for ur help anyways
Click to expand...
Click to collapse
good info that
I read often that it might be solved with one of the following
1. Remove your SD card, run the HardSPL again, then reinsert the SD card with your kovsimg file and it should work
2. reinstall active sync via .msn
3. change the usp port and the data cable
4. disable firewall and antivir
...
But item 1 is reportedly the main reason for most of the error 260 connection failures.
good luck

DrakenKorin said:
good info that
I read often that it might be solved with one of the following
1. Remove your SD card, run the HardSPL again, then reinsert the SD card with your kovsimg file and it should work
2. reinstall active sync via .msn
3. change the usp port and the data cable
4. disable firewall and antivir
...
But item 1 is reportedly the main reason for most of the error 260 connection failures.
good luck
Click to expand...
Click to collapse
sorry it didnt help it showed me a new error with the number of [262] now and the upgrade i think the problem its within the phone it self
thanks for the help tho

error_man said:
sorry it didnt help it showed me a new error with the number of [262] now and the upgrade i think the problem its within the phone it self
thanks for the help tho
Click to expand...
Click to collapse
how did you try the update? w or w/o sd card?
if with card: did you check if the card is formatted as FAT32?
did you try it with a custom rom? maybe try a stock rom (pavelx1 thread) first
pls try to find some aid in hard-spl unlocker... thread
sry, but from here it's like looking for a needle in a haystack...

DrakenKorin said:
how did you try the update? w or w/o sd card?
if with card: did you check if the card is formatted as FAT32?
did you try it with a custom rom? maybe try a stock rom (pavelx1 thread) first
pls try to find some aid in hard-spl unlocker... thread
sry, but from here it's like looking for a needle in a haystack...
Click to expand...
Click to collapse
my dear friend i thank u so much for ur close support to me and my problem
i tryd the activesync first and after the update start on the computer and my phone the update stops at 0% on the computer and the phone as well then the update stops showing error #[262] update error then start the recovery prosses and i formatted my micro-sd to FAT32 and load it with the required file but when i bootload it start the update but stops at the 1st prosses the loading prosses and never move next to the checking and so on
i believe my problem it had something to do with the SPL the rom its locked with the StockSPL that not allowing the update to happen or to get unlocked with the HardSpl

error_man said:
my dear friend i thank u so much for ur close support to me and my problem
i tryd the activesync first and after the update start on the computer and my phone the update stops at 0% on the computer and the phone as well then the update stops showing error #[262] update error then start the recovery prosses and i formatted my micro-sd to FAT32 and load it with the required file but when i bootload it start the update but stops at the 1st prosses the loading prosses and never move next to the checking and so on
i believe my problem it had something to do with the SPL the rom its locked with the StockSPL that not allowing the update to happen or to get unlocked with the HardSpl
Click to expand...
Click to collapse
it's of no use if we can't solve it ... and I'm nearly out of ideas
pls read this, hopefully it helps

DrakenKorin said:
it's of no use if we can't solve it ... and I'm nearly out of ideas
pls read this, hopefully it helps
Click to expand...
Click to collapse
it toke me really long time to find the file in other site other than rapshared and it didnt worked i tryed also newer StockSPL also the same the phone its not updating im getting really helpless here

Have you ever tried to put your phone into the bootloader mode and try to hardSPL again?
Are you currently using win XP? Don't use Win 7 or Vista.

ted presley said:
Have you ever tried to put your phone into the bootloader mode and try to hardSPL again?
Are you currently using win XP? Don't use Win 7 or Vista.
Click to expand...
Click to collapse
yeas my friend i tryed it many many times it didnt work it give the same error [262] and i dont really trust windows 7 or vista with my phone upgrade i only use windows Xp for such things
thank u for ur support n help...

Try installing the newer SPL and then install hard-spl on a different computer without your sd card in the phone.

NeoXerO said:
Try installing the newer SPL and then install hard-spl on a different computer without your sd card in the phone.
Click to expand...
Click to collapse
do you have any idea where i can find an newer SPL ? hope if it is not on rapidshare server

http://forum.xda-developers.com/showthread.php?t=431218
its on XDA server..just click on the first link down on a list of downloads..it reads: X1_HardSPL_v1.zip
hope I cud help

error_man said:
do you have any idea where i can find an newer SPL ? hope if it is not on rapidshare server
Click to expand...
Click to collapse
sounds like he means newer stock spl
not sure if the latest stock roms already have 0.78spl, but you will get it it you flash an older stock rom (0.52) and update via SEUS
cheers

circleofomega said:
http://forum.xda-developers.com/showthread.php?t=431218
its on XDA server..just click on the first link down on a list of downloads..it reads: X1_HardSPL_v1.zip
hope I cud help
Click to expand...
Click to collapse
i didnt help too its the same one the i first used it that got my phone stuck..i really feeling helpless but i thanks u for ur hard work in helping me to get over my problem thanks

DrakenKorin said:
sounds like he means newer stock spl
not sure if the latest stock roms already have 0.78spl, but you will get it it you flash an older stock rom (0.52) and update via SEUS
cheers
Click to expand...
Click to collapse
can u pls tell me where i can find any new and old stocks..cuz SEUS is telling me that i have the latest software update

error_man said:
can u pls tell me where i can find any new and old stocks..cuz SEUS is telling me that i have the latest software update
Click to expand...
Click to collapse
sure
check pavelx1 rom thread in the sticky section
hes got R1-R3 country specific stock rom collection

1. Download stock rom for your country and flash
http://forum.xda-developers.com/showthread.php?t=475482
2. follow instruction: how to restore Stock SPL for warranty reasons from this post
http://forum.xda-developers.com/showpost.php?p=2710557&postcount=1
3. use SEUS to update your stock rom
YOU MUST FLASH STOCK ROM BEFORE RESTORING STOCK SPL

kjk said:
1. Download stock rom for your country and flash
http://forum.xda-developers.com/showthread.php?t=475482
2. follow instruction: how to restore Stock SPL for warranty reasons from this post
http://forum.xda-developers.com/showpost.php?p=2710557&postcount=1
3. use SEUS to update your stock rom
YOU MUST FLASH STOCK ROM BEFORE RESTORING STOCK SPL
Click to expand...
Click to collapse
i guess your way its the only thing that i didnt do yet but the problem is that all thouse stock roms are uploaded to rapidshare and i cant download it from there just hope is any body could tell me other site that i can download thouse new frimware or latest x1 stock rom