Database Develop

[TUT]Flashing the easy way

Hey everyone!
Read lots of threads here on the xda-developers forum, many questions, many answers, lots of "good guys" who are willing and able to help (many have helped me, thank you goes to them and all the others).
The bottom line:
Saw many many questions concerning flashing, bad flashes, error messages and so on.
I really don't know WHY people won't go for the easy way?
Flashing from a PC involves a USB connection through Activesync/WMDC, an application, we all know the procedure thanks to racerx_ (http://trinityguides.info). There are so many things that can go wrong: think about it, from unplugging the device, app error, comm error, power drop, connection drop, system hang and so on.
I don't know about the rest of you but I have done it the hard way but also learned to do it the easy/safe way. There's nothing more to the story than flashing from SD card. Procedure is well described in the Wiki (http://wiki.xda-developers.com/index.php?pagename=Trinity_SDCardFlashing).
I mean, all you have to do is press three buttons and wait for the flash, no risky connection drops, error messages, driver incompatibilites (see Vista problems), no app hangs.
I have tried many ROMs from over here and except for my first two flashes (first was Des' Crash Proof SPL, second was a cooked ROM) I've made them all using the SD card method and never got an error nor a situation with it.
So here's the question: why won't people flash the easy way?

well, have you actualy tried this procedure before posting this?

banesi said:
well, have you actualy tried this procedure before posting this?
Click to expand...
Click to collapse
Read my post once again, carefully.

hold Power button on right side and Camera button at same time and stick with stylus in RESET on bottom
This procedure brings boot loader screen, with three colors, it doesn't bring anything similar to that image posted there.

banesi said:
hold Power button on right side and Camera button at same time and stick with stylus in RESET on bottom
This procedure brings boot loader screen, with three colors, it doesn't bring anything similar to that image posted there.
Click to expand...
Click to collapse
Follow the steps carefully.
1. SD card with FAT32 and no label (it can contain other files, no need to wipe it)
2. Renamed nbh file to TRINIMG.nbh placed on SD card root
3. Power+Camera+Reset
4. Follow instructions on screen (Power button to brgin flash and Soft reset when prompted at the end).
It don't get any easier!
It SHOULD work.

Totally agree, I don't understand why ppl persist with the multitude of errors that crop up from flashing via active sync.
Using the SD card you can chuck a few ROMs on board to test and just rename each in turn to TRINIMG.nbh, move it to the SD root and enter boot loader.
Before I test a new ROM I make a static settings image with SPB Backup so I can flash back to the old ROM and restore back to how it was in a jiffy.
Just to point out for some ppl, some of the ROMs here are packaged into EXEs, you will need to extract the contents and only use the file named RUU_signed.nbh.
This process can also be used to flash Radio ROMs in case you flash a ROM that includes a radio that you don't like/use.
Good thread

P3600i saga continues
I wonder if the SD Card method works on the P3600i? According to the Wiki, it doesn't bypass the SuperCID check.
Olipro has modified his SPL-Trin to work with the P3600i. But so far there's still no definite way to flash it. No Hard-SPL, splxploit don't work, same for JumpSPL. So maybe this is the way? Any opinions?

remofo said:
I wonder if the SD Card method works on the P3600i? According to the Wiki, it doesn't bypass the SuperCID check.
Olipro has modified his SPL-Trin to work with the P3600i. But so far there's still no definite way to flash it. No Hard-SPL, splxploit don't work, same for JumpSPL. So maybe this is the way? Any opinions?
Click to expand...
Click to collapse
No, sorry, it's not the way.
Flashing from SD card is not a workaround for bypassing SPL.
You still have to have some kind of a Hard SPL installed.
Please check the Wiki.

evojulz said:
This process can also be used to flash Radio ROMs in case you flash a ROM that includes a radio that you don't like/use.
Click to expand...
Click to collapse
...and also bootscreens.
In other words, this method can flash any nbh file which could be flashed through the update utility method.

Easy and reliable
Fully agree with you tnyynt!
I always flash using the SD method.
Sometimes I even download the new nbh and keep it on the SD and upgrade later on when having time, not connected to a Pc... (I also have all the cab I need on my SD card).
Quick, easy and reliable (done many times).
Would be fine if the nbh would be released on this forum (rather than the .exe package).
Would allow to download them directly from the Trinity. i.e.: no more need for a Pc !!!

I always use this method, it is the only one that works for me and it's the most convenient I think.

I tried this method several times, but I was never able to get it work.
Yes I followed instructions carefully, but no. I only get three colored bootloader screen, that's it. No button to start flashing, nor screen that looks like that photo in wiki.
I really wanted this to work, cause I have an OsX. Since I couldn't get it to work I had to install xp and use it as virtual machine. From there everything works just great. Because of that, I still have to have windows on my laptop :-(

Speed
About this method: is it faster, same or slower than usb? (consider an average SD card, no high-speed)

Sure SD is faster
g77 said:
About this method: is it faster, same or slower than usb? (consider an average SD card, no high-speed)
Click to expand...
Click to collapse
I flashed recently FinixNOver 3.0.2 (BTW - superb ROM) - only OS + splashscreens and it took 2.5 mins in SD (regular 2GB miniSD SANDISK). I think it is fast enough...

Hi!
I want to tell me,if anybody knows, if i make my device superCID i loose the waranty!
I try to flash it with Trinity_SDCard Flashing from wiki (i make 3 step) and after the reset when is in the grey screen and loading i saw in the up side of screen the number 00068002 and after that change to 3 colored screen!
Any help?

jukkus said:
I tried this method several times, but I was never able to get it work.
Yes I followed instructions carefully, but no. I only get three colored bootloader screen, that's it. No button to start flashing, nor screen that looks like that photo in wiki.
I really wanted this to work, cause I have an OsX. Since I couldn't get it to work I had to install xp and use it as virtual machine. From there everything works just great. Because of that, I still have to have windows on my laptop :-(
Click to expand...
Click to collapse
me second, i also have tried many times and still just can go to the tri-color screen.
i am using hardspl 1.20, and a 4GB sd card with fat32, will these matter?
thanks.

manos_23 said:
Hi!
I want to tell me,if anybody knows, if i make my device superCID i loose the waranty!
I try to flash it with Trinity_SDCard Flashing from wiki (i make 3 step) and after the reset when is in the grey screen and loading i saw in the up side of screen the number 00068002 and after that change to 3 colored screen!
Any help?
Click to expand...
Click to collapse
yes, super-cid will void the warranty.. use hard-spl.. there's no reason to super-cid your device if you're flashing cooked roms..

racerx_ said:
yes, super-cid will void the warranty.. use hard-spl.. there's no reason to super-cid your device if you're flashing cooked roms..
Click to expand...
Click to collapse
Ok, and thank's you very much!

ctrlaltdel said:
me second, i also have tried many times and still just can go to the tri-color screen.
i am using hardspl 1.20, and a 4GB sd card with fat32, will these matter?
thanks.
Click to expand...
Click to collapse
Interesting, I'm sure someone will shoot me down but I'm not convinced it works with all SDHC cards... is your 4GB SDHC?
I can't get it to recognise the NBH from my 8GB but I have flashed many times successfully from my 2GB. Not to bothered, as long as it works

Nope, I'm using 2Gb normal sd-card. Also tried 512Mb card.

Unable to Flash new Roms

Good Afternoon,
First i'd like to thank everyone for the great forum we built.
Don't know if anyone explained this before, but i was unable to find.
I've always been able to flash new roms. I've got SPL 1.07.ds. Last Rom I flashed was Finix'n'over 's Ultra Light.
Today, while trying to flash a new rom, i pressed ROMUpdateUtility.exe, as usual, everything seemed ok, but when into spl i just get serial port (not USB port) and PC just can't find the device. Anyone, plz?
Thanks in advance.

pjvieira said:
Good Afternoon,
First i'd like to thank everyone for the great forum we built.
Don't know if anyone explained this before, but i was unable to find.
I've always been able to flash new roms. I've got SPL 1.07.ds. Last Rom I flashed was Finix'n'over 's Ultra Light.
Today, while trying to flash a new rom, i pressed ROMUpdateUtility.exe, as usual, everything seemed ok, but when into spl i just get serial port (not USB port) and PC just can't find the device. Anyone, plz?
Thanks in advance.
Click to expand...
Click to collapse
You could either use the Flash from SD method, or use this Flash Utility attached. Unzip, then copy your RUU_Signed.nbh file to this folder and flash. I apologize, I don't know whose this is, but it works for me every time. I hope it works for you...

thanks for your fast reply.
Will try it as soon as i get home.
Was afraid i might had brick it.

pjvieira said:
thanks for your fast reply.
Will try it as soon as i get home.
Was afraid i might had brick it.
Click to expand...
Click to collapse
I think now days, there are so many work arounds, that it's pretty hard to end up with a permanant brick.
If what I sent does not work, reply back and let us know. I'm sure someone will get it going again.
Update: If it still does not flash using the above method, then try the SD method. Make sure you have an SD Card in your Trinity and that it is NOT an SDHC Card. Be sure it's formatted FAT32 and has NO NAME. Unzip the included attachment, and copy the SSPL.exe to your SD Card's Root Directory. Then rename the RUU_Signed.nbh file from the ROM of your choice to TRINIMG.nbh, and copy it to the Root Directory of your SD Card.
Go to the File Explorer, and browse to the SD Card Root Directory and run the SSPL.exe file. This should initiate the Flash Process. Again, good luck.
On rare occasion, I've not been able to flash any cooked ROM. In this case, flash back the OEM ROM originally installed on your Trinity. After this flash, it will work again with cooked ROMs.

Thanks for your help. None of the methods above seem to work.
How do i flash the original ROM if i cannot flash the TRIN?

Files needed for OEM ROM SD Card Flash
pjvieira said:
Thanks for your help. None of the methods above seem to work.
How do i flash the original ROM if i cannot flash the TRIN?
Click to expand...
Click to collapse
So the SD Method did not work either? Strange, try flashing the OEM, but for that purpose, I always use the SD Card method. So far, it's always worked.
Pull the RUU_Signed.nbh from the OEM ROM and rename it to TRINIMG.nbh, (I've done this step in the Linked zip file) Copy it to your SD Card and try that method... This will flash back your radio also, so you will need to update it again if you've changed it.
For my phone, I use this ROM:
This is the Full ROM - - My Mirror of Full ROM
Click Here for the needed files
Yours might need something else, but this works for me.

Thanks man!!! SD Flash works...
after you repeat the name in second post, i realise what i've done wrong...
TRINIMB.nbh -> On your first post about it, you wrote a "B". No big deal
Thanks a lot for your time!!!

pjvieira said:
Thanks man!!! SD Flash works...
after you repeat the name in second post, i realise what i've done wrong...
TRINIMB.nbh -> On your first post about it, you wrote a "B". No big deal
Thanks a lot for your time!!!
Click to expand...
Click to collapse
Oops! I'm VERY sorry about that. I try to watch my spelling, but I missed it.
Glad it works now!

Reverted back to original ROM. Doesn't change to USB either but forget it... i can always flash it from SD Card...
Thanks again...

pjvieira said:
Reverted back to original ROM. Doesn't change to USB either but forget it... i can always flash it from SD Card...
Thanks again...
Click to expand...
Click to collapse
Are you able to use the USB for Sync and data transfer? Wondering if it could be a bad USB Port on your Trinity. Or cable?

May i have a question?
I flash my PDA with micro sd with adapter.
Is it possible?

Thanks SuperSport!!! You rule... My stupidity got me to this state :S i recall one night, i missed the hole to softreset with stylus.... probably i caught the usb pin, which moved to the top of other pin...
Don't Know how ActiveSync continued detecting device.... got the pin into its correct position... Everything ok now! Thanks a lot for your patience and time man!!!

rubbish.guy said:
May i have a question?
I flash my PDA with micro sd with adapter.
Is it possible?
Click to expand...
Click to collapse
I have done it with an adapter, as long as it's NOT an SDHC card. My 2GB Micro SD in a Mini SD Adapter worked fine. Just be sure to follow the above instructions.

pjvieira said:
Thanks SuperSport!!! You rule... My stupidity got me to this state :S i recall one night, i missed the hole to softreset with stylus.... probably i caught the usb pin, which moved to the top of other pin...
Don't Know how ActiveSync continued detecting device.... got the pin into its correct position... Everything ok now! Thanks a lot for your patience and time man!!!
Click to expand...
Click to collapse
You are VERY welcome. Obviously you are not too stupid. I'm not sure others would have thought to look into the port for the bent pin. Good Work!

Is it bricked? (Upgrade ROM error)

(I'm not 100% sure this is the correct forum, but since it is very ROM related it didn't feel all wrong to put it in here...)
Hi guys. After som serious flashing of cooked ROMs I decided for some unknown reason that I should try to restore a stock ROM. Now, being very tired as I was, i completely forgott that its probably a good idea to flash a new Stock ROM on the unit BEFORE flashing it with a signed SPL....so I just flashed the Signed SPL to the device. That in it self seem to have gone ok, because when I start the unit it say "SPL-1.15.0000". Problem is though that it also says "Upgrade ROM error, please try again"
Now, what should I do? Have tried put both signed and unsigned SPLs on the storage card and started up via the volume down/pwr button thingy, but that does not seem to do anything. I have also tried to attach the unit to a USB port when in tricolor mode ("USB" shows up on the screen) and tried the CustomRUU program. It finds the device and starts to "upgrade" (grey screen on the device with 0%) but then it just doesnt seem to get any further...
As the device was working fine with a custom ROM before I started all this, I suspect that the main problem proably is that I now have a Standard SPL with a cooked ROM, and that they collide sort of. I, as well as the Blackstone, is now stuck and I am all out of ideas what to do? Have also tried Hard and Soft resets, but that doesnt seem to change anything.
Help!

try removing the SD Card and put the phone into bootloader mode and re-flash the stock ROM! if this doesn't work ... still with the SD Card removed try flashing to USPL and flash the stock ROM again!
hope this helps

You can try USPL on your HD and flash a custom or stock ROM with it.

PapaDocta said:
try removing the SD Card and put the phone into bootloader mode and re-flash the stock ROM! if this doesn't work ... still with the SD Card removed try flashing to USPL and flash the stock ROM again!
hope this helps
Click to expand...
Click to collapse
Thanks for the feedback!
Just be be sure, "into bootloader mode" is when you start the device holding down volume down and powerkey until you see the tricolor screen? Then that is probably what I have tried to do for a while now without success (total success that is, I do get into the tricolored screen)). Or maybe I am doing something wrong, could you perhaps point to a detailed explaination besides the one in "HardSPL" thread?
USPL I havnt tried, will do that! Is it still so that trying to do USPL on Vista is asking for trouble?
I read somewhere that Stock ROMs should only be flashed from internal storage, not SD cards, is that true? If so, how do I go about accessing that storage now when it doesnt show up in the file explorer on my PC (PC recognizes it as USB device, "HTC Sync" but I get no file access to it).

improwise said:
Thanks for the feedback!
Just be be sure, "into bootloader mode" is when you start the device holding down volume down and powerkey until you see the tricolor screen? Then that is probably what I have tried to do for a while now without success. Or maybe I am doing something wrong, could you perhaps point to a detailed explaination besides the one in "HardSPL" thread?
USPL I havnt tried, will do that! Is it still so that trying to do USPL on Vista is asking for trouble?
Click to expand...
Click to collapse
just do uspl it will work

improwise said:
Thanks for the feedback!
Just be be sure, "into bootloader mode" is when you start the device holding down volume down and powerkey until you see the tricolor screen? Then that is probably what I have tried to do for a while now without success (total success that is, I do get into the tricolored screen)). Or maybe I am doing something wrong, could you perhaps point to a detailed explaination besides the one in "HardSPL" thread?
USPL I havnt tried, will do that! Is it still so that trying to do USPL on Vista is asking for trouble?
I read somewhere that Stock ROMs should only be flashed from internal storage, not SD cards, is that true? If so, how do I go about accessing that storage now when it doesnt show up in the file explorer on my PC (PC recognizes it as USB device, "HTC Sync" but I get no file access to it).
Click to expand...
Click to collapse
bootloader mode is when you power off the device and hold the volume button down and press power till you get the tricolor screen...
so here is what you need to do .
1. remove the sd card
2. go into the tricolor mode connect your device to the pc and make sure it says (USB) at the bottom
3. run the stock shipped exe from you pc
if that didn't work then you should try the USPL version.. and there is a guide if you are using vista.. i just tried and worked fine.. here it is
http://forum.xda-developers.com/showpost.php?p=3331078&postcount=153
and the reason i'm asking you to remove the sd card because if you have a rom (blacimg.nbh) it won't let you do anything it will try to flash from the sd card and right now you don't want to do that.
and you shouldn't put any rom into the internal storage of the phone..

PapaDocta said:
and you shouldn't put any rom into the internal storage of the phone..
Click to expand...
Click to collapse
What happens if you do that? will it try and flash over the flash? Proper *&@! it up?

nicelad_uk said:
What happens if you do that? will it try and flash over the flash? Proper *&@! it up?
Click to expand...
Click to collapse
i don't think anything would happen... the file will get deleted when you flash as the rest of the files in the internal memory

Thank you everyone! The USPL thing solved it, when I did it from a XP machine! The once bricked Blackstone is not alive an kicking again!
About USPL, I saw the workaround for Vista, but downgrading a few components to make it work just doesn't seem like a safe way to do it. And I cant help but to think that it might have unwanted side affects, ie affecting system stability. But maybe I am wrong?

Going back to shipped ROM without bricking?
Hi,
After reading this thread I am now a bit worried and, as a newbie, would appreciate maybe a "simple" answer to my question.
I''ve been experimenting with various cooked ROMs after following the guide in the WIKI for installing HardSPL and then putting the ROM file (BLACKIMG.nbh) on my SD card and installing it using the power on + volume down button method.
However, I now want to revert back to the original "shipped" ROM, which I have downloaded from the list of shipped ROMs via the WIKI (I downloaded the one which closely matched what was originally on my HD - as I didn't know how to backup the actual ROM on my HD at the time).
So, my question:
How should I put the downloaded original/shipped ROM:
RUU_BlackStone_HTC_WWE_1.14.405.3_Radio_52.49a.25.26_1.09.25.14_Ship.exe
into my HD without bricking it?! Do I just run it on my PC with ActiveSync enabled or do I need to do something to remove the HardSPL or something first?
Sorry if this has been answered previously but I get confused when a thread just makes loads of references to SPLthis and SPLthat etc.!

if you have the HardSPL already installed on your phone then you don't need to do anything more.. just connect your phone to the pc and let it sync (activesync enabled) and flash to any shipped rom you want by simply running the exe file..

PapaDocta said:
if you have the HardSPL already installed on your phone then you don't need to do anything more.. just connect your phone to the pc and let it sync (activesync enabled) and flash to any shipped rom you want by simply running the exe file..
Click to expand...
Click to collapse
Brilliant! Thanks for the simple answer Worked no problem!

Annoying Phone problem

I apologize if this thread has been seen before, I searched and couldn't find anything pertinent. Anyways, my phone has recently started to freeze, causing me to turn it off where it then erases its memory equivalent to a hard reset on an hourly basis. This happens even if I turn it off without it freezing it still acts like I performed a hard reset on it. Also when I text my messages fail to send because I get the error code "failed to encode message" And the majority of my programs are not working as in it will say something like "failed to run xml file" or "failed to run kfreeplay file." I tried flashing different roms to no avail. I think there are some crucial memory blocks on my phone that have been corrupted. I am at a loss as to what to do and any help is appreciated.
Thanks,
-John

what ROMs? WinMo 6.5 roms?
I had the reset issue, until I flashed to stock ROM first, then to 6.5 ROM. Time will tell, as I just did that this morning
I made the mistake of not reading the cook's FAQ at the beginning of his thread about flashing to stock ROM first

Well this all came about because my PDA corner ultimate V.5 was getting slow so I was going to upgrade to make it faster. When I flashed the new ROM it turned bad and so I flashed to some other ROMS which had the same problem. So I eventually went back to my PDA corner ultimate V.5 but I am still having the problems associated with the other Roms as well. I will try flashing the stock Rom see if that helps.

No dice reflashing the stock ROM because I use a mac and so the only way I can flash is through USB and the file isn't able to be flashed by USB only through .exe Any other suggestions?

Johnster988 said:
No dice reflashing the stock ROM because I use a mac and so the only way I can flash is through USB and the file isn't able to be flashed by USB only through .exe Any other suggestions?
Click to expand...
Click to collapse
I 2nd "cmwgimp" in that flashing the stock ROM BEFORE flashing a new ROM is a must. If you read through any of the ROM threads you will find that to be true as well.
The fact that you haven't flashed the stock ROM before trying the new ROM's is most certainly the reason all of the additional ROM's you flashed after PDA Ultimate V5 have had problems.
Download the HTC stock ROM onto a flash drive, find someone with a PC (maybe even a library/college/etc.) and reload it from there. It will take less than 15 minutes and it will certainly eliminate many of your issues. Just remember to hard reset after loading the stock ROM, then hard reset again after loading your "preferred" ROM.
Hope this helps! Take care!

Johnster988 said:
No dice reflashing the stock ROM because I use a mac and so the only way I can flash is through USB and the file isn't able to be flashed by USB only through .exe Any other suggestions?
Click to expand...
Click to collapse
Alternatively, you can download the HTC stock ROM, extract it using any UnRAR program for OS X (a google search will yield plenty of results) and after doing that, rename the extracted file called RUU_Signed.nbh to KAISIMG.nbh. Then, you can move KAISIMG.nbh to your MicroSD card using a card reader, and put that back in your device. Hold the Camera and Power Button at the same time while the device is off to load the bootloader, and if you did everything right, you should be able to follow the instructions from there.

DaveTheTytnIIGuy said:
Alternatively, you can download the HTC stock ROM, extract it using any UnRAR program for OS X (a google search will yield plenty of results) and after doing that, rename the extracted file called RUU_Signed.nbh to KAISIMG.nbh. Then, you can move KAISIMG.nbh to your MicroSD card using a card reader, and put that back in your device. Hold the Camera and Power Button at the same time while the device is off to load the bootloader, and if you did everything right, you should be able to follow the instructions from there.
Click to expand...
Click to collapse
Great tip - I never knew this! Thanks for posting!

krouth said:
Great tip - I never knew this! Thanks for posting!
Click to expand...
Click to collapse
I learn something new each day I come here, might as well pass that on to others. The wiki page concerning it is here, if anyone wants the original source. It goes into more depth and discusses troubleshooting options as well.

USB Method and Card method don't work

Like the title says, any possible method on flashing does not work on my Xperia anymore....what to do now?
I use a card which has always worked with Flashing, and my PC recognizes my phone as long as it is not in bootloader.....

more info on "doesn't work", how doesn't it work?
also try formatting your card again

Reset?
I take it you've tried a hard reset?!
Have you searched the forum as well? There's quite a few threads about flashing problems. Your answer might be there somewhere already!
Also, you haven't posted which ROM you are using but if its a stock R3AA series ROM then it might have written the stock SPL back to your device (and new radio firmware too) so that might be your problem, since the stock SPL doesn't support SD card flashing.
Without more information on your problem I doubt anyone will be able to help!

The Rom I use is Touch it BL, and I have formatted the card several times, that is all the info I can give you I guess...any idea on how to solve this? And thanks in advance for the help, I read through a lot of the forum but nothing seemed to help me...

re-check the image file name, make sure it is not KOVSIMG.nbh.nbh

Did that too, still no results...

SyntheticDistortion said:
Like the title says, any possible method on flashing does not work on my Xperia anymore....what to do now?
I use a card which has always worked with Flashing, and my PC recognizes my phone as long as it is not in bootloader.....
Click to expand...
Click to collapse
does that mean you can't get into boot loader or that when you are in boot loader mode no image is found?

DrakenKorin said:
does that mean you can't get into boot loader or that when you are in boot loader mode no image is found?
Click to expand...
Click to collapse
No Image is found, not on the card and not via the USB :S

Did you make sure that the image file is copied on to the root directory of your storage card? What brand and size SD card are you using? Is it formatted Fat32? Also, try a different SD card as there have been some problems with certain brands. Could also be that the image file is corrupted. Might try a different image file.

Same problem here!!!
can't flash via card and activesync anymore recently!
AND must boot with usb cable with power to pass the bootloader, otherwise, the screen will stuck in tri-color screen

Make sure you're using a Micro SD and not a Micro SDHC as that usually has the issue you mentioned. If you can still boot to windows try to access the card and see if it's corrupted. You may have a dead card. Just a couple things to try.

Tried all that, after some trying I found out that the phone is performing well when it has started up, WMDC does what it's supposed to and the phone behaves well..untill I try to flash, as soon as it's in bootloader it seems like my PC doesn't recognise my phone and the phone doesn't recognise it's arttached to a computer...

SyntheticDistortion said:
Tried all that, after some trying I found out that the phone is performing well when it has started up, WMDC does what it's supposed to and the phone behaves well..untill I try to flash, as soon as it's in bootloader it seems like my PC doesn't recognise my phone and the phone doesn't recognise it's arttached to a computer...
Click to expand...
Click to collapse
Have you tried re-flashing the Hard SPL to your device?
I know you've said that you can't flash once you are in bootloader but flashing the Hard SPL might work even though flashing a new ROM didn't.
I had a related problem ages ago and re-flashing Hard SPL fixed it for me.
Fingers crossed for you!

Still nothing...I appreciate for the help guys...but I'm getting desperate here...nothing is working!

SyntheticDistortion said:
Still nothing...I appreciate for the help guys...but I'm getting desperate here...nothing is working!
Click to expand...
Click to collapse
sry I didn't post this earlier, hopefully it helps
bootloader app

DrakenKorin said:
sry I didn't post this earlier, hopefully it helps
bootloader app
Click to expand...
Click to collapse
Sorry mate...again I am stuck in bootloader and the phone is unwilling to co-operate any further..