Database Develop

[TUT]Flashing the easy way

Hey everyone!
Read lots of threads here on the xda-developers forum, many questions, many answers, lots of "good guys" who are willing and able to help (many have helped me, thank you goes to them and all the others).
The bottom line:
Saw many many questions concerning flashing, bad flashes, error messages and so on.
I really don't know WHY people won't go for the easy way?
Flashing from a PC involves a USB connection through Activesync/WMDC, an application, we all know the procedure thanks to racerx_ (http://trinityguides.info). There are so many things that can go wrong: think about it, from unplugging the device, app error, comm error, power drop, connection drop, system hang and so on.
I don't know about the rest of you but I have done it the hard way but also learned to do it the easy/safe way. There's nothing more to the story than flashing from SD card. Procedure is well described in the Wiki (http://wiki.xda-developers.com/index.php?pagename=Trinity_SDCardFlashing).
I mean, all you have to do is press three buttons and wait for the flash, no risky connection drops, error messages, driver incompatibilites (see Vista problems), no app hangs.
I have tried many ROMs from over here and except for my first two flashes (first was Des' Crash Proof SPL, second was a cooked ROM) I've made them all using the SD card method and never got an error nor a situation with it.
So here's the question: why won't people flash the easy way?

well, have you actualy tried this procedure before posting this?

banesi said:
well, have you actualy tried this procedure before posting this?
Click to expand...
Click to collapse
Read my post once again, carefully.

hold Power button on right side and Camera button at same time and stick with stylus in RESET on bottom
This procedure brings boot loader screen, with three colors, it doesn't bring anything similar to that image posted there.

banesi said:
hold Power button on right side and Camera button at same time and stick with stylus in RESET on bottom
This procedure brings boot loader screen, with three colors, it doesn't bring anything similar to that image posted there.
Click to expand...
Click to collapse
Follow the steps carefully.
1. SD card with FAT32 and no label (it can contain other files, no need to wipe it)
2. Renamed nbh file to TRINIMG.nbh placed on SD card root
3. Power+Camera+Reset
4. Follow instructions on screen (Power button to brgin flash and Soft reset when prompted at the end).
It don't get any easier!
It SHOULD work.

Totally agree, I don't understand why ppl persist with the multitude of errors that crop up from flashing via active sync.
Using the SD card you can chuck a few ROMs on board to test and just rename each in turn to TRINIMG.nbh, move it to the SD root and enter boot loader.
Before I test a new ROM I make a static settings image with SPB Backup so I can flash back to the old ROM and restore back to how it was in a jiffy.
Just to point out for some ppl, some of the ROMs here are packaged into EXEs, you will need to extract the contents and only use the file named RUU_signed.nbh.
This process can also be used to flash Radio ROMs in case you flash a ROM that includes a radio that you don't like/use.
Good thread

P3600i saga continues
I wonder if the SD Card method works on the P3600i? According to the Wiki, it doesn't bypass the SuperCID check.
Olipro has modified his SPL-Trin to work with the P3600i. But so far there's still no definite way to flash it. No Hard-SPL, splxploit don't work, same for JumpSPL. So maybe this is the way? Any opinions?

remofo said:
I wonder if the SD Card method works on the P3600i? According to the Wiki, it doesn't bypass the SuperCID check.
Olipro has modified his SPL-Trin to work with the P3600i. But so far there's still no definite way to flash it. No Hard-SPL, splxploit don't work, same for JumpSPL. So maybe this is the way? Any opinions?
Click to expand...
Click to collapse
No, sorry, it's not the way.
Flashing from SD card is not a workaround for bypassing SPL.
You still have to have some kind of a Hard SPL installed.
Please check the Wiki.

evojulz said:
This process can also be used to flash Radio ROMs in case you flash a ROM that includes a radio that you don't like/use.
Click to expand...
Click to collapse
...and also bootscreens.
In other words, this method can flash any nbh file which could be flashed through the update utility method.

Easy and reliable
Fully agree with you tnyynt!
I always flash using the SD method.
Sometimes I even download the new nbh and keep it on the SD and upgrade later on when having time, not connected to a Pc... (I also have all the cab I need on my SD card).
Quick, easy and reliable (done many times).
Would be fine if the nbh would be released on this forum (rather than the .exe package).
Would allow to download them directly from the Trinity. i.e.: no more need for a Pc !!!

I always use this method, it is the only one that works for me and it's the most convenient I think.

I tried this method several times, but I was never able to get it work.
Yes I followed instructions carefully, but no. I only get three colored bootloader screen, that's it. No button to start flashing, nor screen that looks like that photo in wiki.
I really wanted this to work, cause I have an OsX. Since I couldn't get it to work I had to install xp and use it as virtual machine. From there everything works just great. Because of that, I still have to have windows on my laptop :-(

Speed
About this method: is it faster, same or slower than usb? (consider an average SD card, no high-speed)

Sure SD is faster
g77 said:
About this method: is it faster, same or slower than usb? (consider an average SD card, no high-speed)
Click to expand...
Click to collapse
I flashed recently FinixNOver 3.0.2 (BTW - superb ROM) - only OS + splashscreens and it took 2.5 mins in SD (regular 2GB miniSD SANDISK). I think it is fast enough...

Hi!
I want to tell me,if anybody knows, if i make my device superCID i loose the waranty!
I try to flash it with Trinity_SDCard Flashing from wiki (i make 3 step) and after the reset when is in the grey screen and loading i saw in the up side of screen the number 00068002 and after that change to 3 colored screen!
Any help?

jukkus said:
I tried this method several times, but I was never able to get it work.
Yes I followed instructions carefully, but no. I only get three colored bootloader screen, that's it. No button to start flashing, nor screen that looks like that photo in wiki.
I really wanted this to work, cause I have an OsX. Since I couldn't get it to work I had to install xp and use it as virtual machine. From there everything works just great. Because of that, I still have to have windows on my laptop :-(
Click to expand...
Click to collapse
me second, i also have tried many times and still just can go to the tri-color screen.
i am using hardspl 1.20, and a 4GB sd card with fat32, will these matter?
thanks.

manos_23 said:
Hi!
I want to tell me,if anybody knows, if i make my device superCID i loose the waranty!
I try to flash it with Trinity_SDCard Flashing from wiki (i make 3 step) and after the reset when is in the grey screen and loading i saw in the up side of screen the number 00068002 and after that change to 3 colored screen!
Any help?
Click to expand...
Click to collapse
yes, super-cid will void the warranty.. use hard-spl.. there's no reason to super-cid your device if you're flashing cooked roms..

racerx_ said:
yes, super-cid will void the warranty.. use hard-spl.. there's no reason to super-cid your device if you're flashing cooked roms..
Click to expand...
Click to collapse
Ok, and thank's you very much!

ctrlaltdel said:
me second, i also have tried many times and still just can go to the tri-color screen.
i am using hardspl 1.20, and a 4GB sd card with fat32, will these matter?
thanks.
Click to expand...
Click to collapse
Interesting, I'm sure someone will shoot me down but I'm not convinced it works with all SDHC cards... is your 4GB SDHC?
I can't get it to recognise the NBH from my 8GB but I have flashed many times successfully from my 2GB. Not to bothered, as long as it works

Nope, I'm using 2Gb normal sd-card. Also tried 512Mb card.

Can't flash Kaiser HardSPL in any way???

Iv'e tryed to flash HardSPL to Kaiser... Downloaded various unlockers/flashers, even SD card solution... When trying to flash over usb with some Kaiser-HardSPL.exe - after entering tricolor mode and when progressbar appears it always stuck on 0%, and nothing happens... Update utility shows error (Rom update utility encountered communication error or smth.) and sugests me to do recovery. Tryed everything - SoftSpl1.56, Softspl1.93, SSpl-kais...
Other method i've tryed - SD card
Iv'e followed instructions, formatted card, copied those two files (http://forum.xda-developers.com/showthread.php?t=420683) to sd card, but after resetting Kaiser it only shows "Loading..." and hangs... no restart, nothing... just "loading..." on screen...
Bootloader menu shows following versions:
KAIS130
SPL-3.29.0000
CPLD-8

somehow... after trying another 1000 -th time... it just flashed...

Have exactly the same problem, tried all other solutions! any idea on what the last method was that worked?

When flashing via USB it will hang at 0% (and fail w/ 260 error on PC side) if the SD card is left in. I've made that mistake more than once.
Remember to remove SIM, too.

I don't have sd card and I've got the same problem...
Any ideas?

I have the same problem. I want to upgrade Hard SPL 3.24 to newer version. I always get 262 error. Also tried all possible ways (MicroSD uses FAT32, but I didn't formatted It, because I don't have SD adapter).
Sometimes It's shown that flashing complete, but HardSPL version still is the same.

Read you noobs
FOLLOW THE DIRECTIONS
http://forum.xda-developers.com/showthread.php?t=396922

latinohot, I'm doing all right...
EDIT:
I changed cable, and it went for the first time

Biker182 said:
latinohot, I'm doing all right...
EDIT:
I changed cable, and it went for the first time
Click to expand...
Click to collapse
good, also check the contact pins, sometimes they get bent.

hmmm...
i STILL can't get hardspl to work at all...just get stuck at 0%

sabzi43 said:
i STILL can't get hardspl to work at all...just get stuck at 0%
Click to expand...
Click to collapse
Are you using sspl to upgrade? sim and sd out? usb cable or sd flash? Do you already have a hspl and are just upgrading?
If you're on an original spl you must use sspl to do it.
If you're upgrading then you can use the kaisdiag file by cmonex and an sd.

aaaaahhhhh
WarByte said:
Are you using sspl to upgrade? sim and sd out? usb cable or sd flash? Do you already have a hspl and are just upgrading?
If you're on an original spl you must use sspl to do it.
If you're upgrading then you can use the kaisdiag file by cmonex and an sd.
Click to expand...
Click to collapse
I'm using usb to windows 7, sim and sd were out.
The thing is i've never done this before, but i am pretty sure i have it down...
I tried this I think 3 times then started to panic when after the recover from the freeze, i noticed things being weird, so i hard reset so i still have a functioning phone until i figure this out.
(it still has bugs it never had before :/)
ive downloaded numorous hardspls, all didnt work.
it's been one saaaaaaaaaaaad experience cuz i really want to make this happen and brag to my guy friends I FLASHED MY PHONE.
and get win 6.5, of course.
any help much appreciated!!!!!!!

sabzi43 said:
I'm using usb to windows 7, sim and sd were out.
The thing is i've never done this before, but i am pretty sure i have it down...
I tried this I think 3 times then started to panic when after the recover from the freeze, i noticed things being weird, so i hard reset so i still have a functioning phone until i figure this out.
(it still has bugs it never had before :/)
ive downloaded numorous hardspls, all didnt work.
it's been one saaaaaaaaaaaad experience cuz i really want to make this happen and brag to my guy friends I FLASHED MY PHONE.
and get win 6.5, of course.
any help much appreciated!!!!!!!
Click to expand...
Click to collapse
copy sspl.exe into your device and run it then you can flash with CustomRUU
to much better you are using ActiveSync on Windows XP

Thanks so much!!! i got it to work!!!! i actually used a jump spl instead, but i now am running win 6.5 on my kaiser!!!!!!! and i'm beyond stoked
THANKS Y'ALL!

Is it bricked? (Upgrade ROM error)

(I'm not 100% sure this is the correct forum, but since it is very ROM related it didn't feel all wrong to put it in here...)
Hi guys. After som serious flashing of cooked ROMs I decided for some unknown reason that I should try to restore a stock ROM. Now, being very tired as I was, i completely forgott that its probably a good idea to flash a new Stock ROM on the unit BEFORE flashing it with a signed SPL....so I just flashed the Signed SPL to the device. That in it self seem to have gone ok, because when I start the unit it say "SPL-1.15.0000". Problem is though that it also says "Upgrade ROM error, please try again"
Now, what should I do? Have tried put both signed and unsigned SPLs on the storage card and started up via the volume down/pwr button thingy, but that does not seem to do anything. I have also tried to attach the unit to a USB port when in tricolor mode ("USB" shows up on the screen) and tried the CustomRUU program. It finds the device and starts to "upgrade" (grey screen on the device with 0%) but then it just doesnt seem to get any further...
As the device was working fine with a custom ROM before I started all this, I suspect that the main problem proably is that I now have a Standard SPL with a cooked ROM, and that they collide sort of. I, as well as the Blackstone, is now stuck and I am all out of ideas what to do? Have also tried Hard and Soft resets, but that doesnt seem to change anything.
Help!

try removing the SD Card and put the phone into bootloader mode and re-flash the stock ROM! if this doesn't work ... still with the SD Card removed try flashing to USPL and flash the stock ROM again!
hope this helps

You can try USPL on your HD and flash a custom or stock ROM with it.

PapaDocta said:
try removing the SD Card and put the phone into bootloader mode and re-flash the stock ROM! if this doesn't work ... still with the SD Card removed try flashing to USPL and flash the stock ROM again!
hope this helps
Click to expand...
Click to collapse
Thanks for the feedback!
Just be be sure, "into bootloader mode" is when you start the device holding down volume down and powerkey until you see the tricolor screen? Then that is probably what I have tried to do for a while now without success (total success that is, I do get into the tricolored screen)). Or maybe I am doing something wrong, could you perhaps point to a detailed explaination besides the one in "HardSPL" thread?
USPL I havnt tried, will do that! Is it still so that trying to do USPL on Vista is asking for trouble?
I read somewhere that Stock ROMs should only be flashed from internal storage, not SD cards, is that true? If so, how do I go about accessing that storage now when it doesnt show up in the file explorer on my PC (PC recognizes it as USB device, "HTC Sync" but I get no file access to it).

improwise said:
Thanks for the feedback!
Just be be sure, "into bootloader mode" is when you start the device holding down volume down and powerkey until you see the tricolor screen? Then that is probably what I have tried to do for a while now without success. Or maybe I am doing something wrong, could you perhaps point to a detailed explaination besides the one in "HardSPL" thread?
USPL I havnt tried, will do that! Is it still so that trying to do USPL on Vista is asking for trouble?
Click to expand...
Click to collapse
just do uspl it will work

improwise said:
Thanks for the feedback!
Just be be sure, "into bootloader mode" is when you start the device holding down volume down and powerkey until you see the tricolor screen? Then that is probably what I have tried to do for a while now without success (total success that is, I do get into the tricolored screen)). Or maybe I am doing something wrong, could you perhaps point to a detailed explaination besides the one in "HardSPL" thread?
USPL I havnt tried, will do that! Is it still so that trying to do USPL on Vista is asking for trouble?
I read somewhere that Stock ROMs should only be flashed from internal storage, not SD cards, is that true? If so, how do I go about accessing that storage now when it doesnt show up in the file explorer on my PC (PC recognizes it as USB device, "HTC Sync" but I get no file access to it).
Click to expand...
Click to collapse
bootloader mode is when you power off the device and hold the volume button down and press power till you get the tricolor screen...
so here is what you need to do .
1. remove the sd card
2. go into the tricolor mode connect your device to the pc and make sure it says (USB) at the bottom
3. run the stock shipped exe from you pc
if that didn't work then you should try the USPL version.. and there is a guide if you are using vista.. i just tried and worked fine.. here it is
http://forum.xda-developers.com/showpost.php?p=3331078&postcount=153
and the reason i'm asking you to remove the sd card because if you have a rom (blacimg.nbh) it won't let you do anything it will try to flash from the sd card and right now you don't want to do that.
and you shouldn't put any rom into the internal storage of the phone..

PapaDocta said:
and you shouldn't put any rom into the internal storage of the phone..
Click to expand...
Click to collapse
What happens if you do that? will it try and flash over the flash? Proper *&@! it up?

nicelad_uk said:
What happens if you do that? will it try and flash over the flash? Proper *&@! it up?
Click to expand...
Click to collapse
i don't think anything would happen... the file will get deleted when you flash as the rest of the files in the internal memory

Thank you everyone! The USPL thing solved it, when I did it from a XP machine! The once bricked Blackstone is not alive an kicking again!
About USPL, I saw the workaround for Vista, but downgrading a few components to make it work just doesn't seem like a safe way to do it. And I cant help but to think that it might have unwanted side affects, ie affecting system stability. But maybe I am wrong?

Going back to shipped ROM without bricking?
Hi,
After reading this thread I am now a bit worried and, as a newbie, would appreciate maybe a "simple" answer to my question.
I''ve been experimenting with various cooked ROMs after following the guide in the WIKI for installing HardSPL and then putting the ROM file (BLACKIMG.nbh) on my SD card and installing it using the power on + volume down button method.
However, I now want to revert back to the original "shipped" ROM, which I have downloaded from the list of shipped ROMs via the WIKI (I downloaded the one which closely matched what was originally on my HD - as I didn't know how to backup the actual ROM on my HD at the time).
So, my question:
How should I put the downloaded original/shipped ROM:
RUU_BlackStone_HTC_WWE_1.14.405.3_Radio_52.49a.25.26_1.09.25.14_Ship.exe
into my HD without bricking it?! Do I just run it on my PC with ActiveSync enabled or do I need to do something to remove the HardSPL or something first?
Sorry if this has been answered previously but I get confused when a thread just makes loads of references to SPLthis and SPLthat etc.!

if you have the HardSPL already installed on your phone then you don't need to do anything more.. just connect your phone to the pc and let it sync (activesync enabled) and flash to any shipped rom you want by simply running the exe file..

PapaDocta said:
if you have the HardSPL already installed on your phone then you don't need to do anything more.. just connect your phone to the pc and let it sync (activesync enabled) and flash to any shipped rom you want by simply running the exe file..
Click to expand...
Click to collapse
Brilliant! Thanks for the simple answer Worked no problem!

Xperia brainfart: Problems with flashing

So people around here sometimes get troubled with regular flashing that doesn't work anymore.
I'll explain my problem on this part:
I flashed to a new ROM just to find out that i didn't like the content so i wanted to flash back to TOUCH X.
I did the usual stuff to flash my phone with, Hardspl, then bootloader etc. etc.
PROBLEM!
Now all my phone seems to be doing is go into bootlader and start updating. However, after 3 seconds i get the message that the update is complete. My phone resets itself, and i found out that nothing has changed. I tried it a number of other times, without results.
Now my question is: is there any other way to do this, this is obviously not working!
post all your ideas here so other people can read this in case that they have the same problem!

Everytime you flash a ROM, you do not need to hardspl your device, only once...I would reformat your memory card,use a stock original rom and see if it will flash with that....usually the issue you are seeing is because the nbh file is not being read properly, make sure your nbh file is named correctly.I have had the issue earlier in my days where if I copied the nbh file through active sync something gets screwed in the transfer...used an external card reader and copied it to my memory card after formatting it and it went through....just some suggestions....Good Luck
Regards,
WC

didn't solve it at all.
More suggestions?

SyntheticDistortion said:
didn't solve it at all.
More suggestions?
Click to expand...
Click to collapse
seems to be your problem? ---> CLICK

Nope, didn't do anything..
Any other suggestions?
EDIT: Really a lot of thanks for anyone helping, i really would love to start flashing again!

grateful for the help arnt you..

try flashing the USB method, if it works its probably due to your memory card. (unless ur already using the usb method, then try the memory card method!)

How do i use the USB method exactly?
And really guys, thanks for all the feedback, maybe make this a sticky for future reference?

SyntheticDistortion said:
How do i use the USB method exactly?
And really guys, thanks for all the feedback, maybe make this a sticky for future reference?
Click to expand...
Click to collapse
well what you do is download the file attached to this post (it is available in one of the stickies but when i tried to download it, it failed so i zipped this one up for you)
extract the .exe within to where your nbh file is (not on xperia, on computer)
make sure there is no KOVSIMG.nbh on your memory card!
put your phone in bootloader (tricolour screen) and plug in via USB
run the custom_RUU.exe and follow the prompts pressing next etc.
you don't have to sync via activesync 1st like it says.
ignore the version number of the ROM just make sure your using the correct nbh and flash!

urm i think you should at least try to look at the stickies .........
this is very useful. i had problem flashing using micro sd so all my flashes are via usb.
http://forum.xda-developers.com/showthread.php?t=497511

That seemed to have done the trick people!
Thanks very much and keep up the good work!

SE Updater failed to install new rom, what is the best thing to do now?

Hello,
I know you guys got some excellent walkthroughs, roms, programs and threads where you've helped a lot of people out but I could really use some personal feedback. I had hoped to fix my phone using one of the excisting threads but unfortunalty I can't get it to work with those.
My problem is one I've seen more of in here, I used the SE updater and it froze at 53%, I did what the program said, reconnected and it froze again at 12%, and again, again, etc. So I disconnected thinking it might be a bad USB port. But then the updater didn't recognise my phone at all. So I used the mtty program suggested in some of the threads and I got past the red/green/blue screen but now it's stuck at the Sony Ericson logo, as if WM6.1 is gone.
This is what the red/green/blue screen currently states:
KOV110
SPL-0.78.0000
MicroP1-787
MicroP2-707
From what I gather this means I can't flash roms, right? I tried making it a hard-spl but when I use the tool it says it can't connect.
So is there anyway to get a rom on it and bring it back to life?
Thanks inadvance!

Get an original rom from here : http://forum.xda-developers.com/showthread.php?t=475482
copy .nbh file from the package onto your sd card and rename it to : Kovsimg.nbh then bring phone into boot loader via : vol down + power.
It should flash the rom now. i the problem is still present after that you
have to deal with mTTy but first try the flash...
i think you could also bring phone into bootloader without sd card inserted then connect usb cable, display should now print 'USB',and after that start rom update utility.
regards

meska said:
Get an original rom from here : http://forum.xda-developers.com/showthread.php?t=475482
copy .nbh file from the package onto your sd card and rename it to : Kovsimg.nbh then bring phone into boot loader via : vol down + power.
It should flash the rom now. i the problem is still present after that you
have to deal with mTTy but first try the flash...
i think you could also bring phone into bootloader without sd card inserted then connect usb cable, display should now print 'USB',and after that start rom update utility.
regards
Click to expand...
Click to collapse
Thank you for your reply, I will do as you said although I've already tried something similiar to this. I believe the problem was that I couldn't flash roms from my SD since I don't have the hard SLD. But I will try it anyway as soon as I get home.
In the mean time I would love to hear more ideas about how to fix my phone.

Ronnet said:
Thank you for your reply, I will do as you said although I've already tried something similiar to this. I believe the problem was that I couldn't flash roms from my SD since I don't have the hard SLD. But I will try it anyway as soon as I get home.
In the mean time I would love to hear more ideas about how to fix my phone.
Click to expand...
Click to collapse
You really need have to flash the HardSPL first as, based in your above post, you still have not done that. It will be useless to flash cooked ROM with that. If you can still power on your phone and you have an activesynch in your computer, i suggest you download the HardSPL first and update your phone using your PC. If you are successful doing that, then you can flash all you want.

original roms will still work with original spl... but nevermind =P

laurence0609 said:
You really need have to flash the HardSPL first as, based in your above post, you still have not done that. It will be useless to flash cooked ROM with that. If you can still power on your phone and you have an activesynch in your computer, i suggest you download the HardSPL first and update your phone using your PC. If you are successful doing that, then you can flash all you want.
Click to expand...
Click to collapse
My phone can still power on in the sense that it shows the Sony Ericson logo or that I can access the three collor screen. But it won't launch WM6.1. I also have a problem with updating to hard DSL. It does recognise my phone because without it connected the program finds nothing and with the phone connected it wants to start updating. It says ''updating from image version: (emply) to image version: 1.00.X1 Ipress next and it opens a progress bar on both my X1 and the PC. But it never goes beyond 0% and then gives me an connection error. I think it has something to do with not being able to get passed the Sony Ericson logo. I mean the hard-DSL program does recognise my mobile but activeSync is never active because my PC doesn't recognise a WinMobile phone (since it wont go past the Sony Ericson screen)

meska said:
original roms will still work with original spl... but nevermind =P
Click to expand...
Click to collapse
Really? That might fix my device then. Could you suggest a rom from the long list? Perhaps one that works on all versions? Because I'm dutch but my mobile has always been in english so I'm not sure what rom version I had. Except that it was identified as an R2 Rom by the Sony updater before it killed my X1...

Go here
Find the latest stock rom for your country (and perhaps your carrier) and flash it
No need to have Hard SPL for that

Mopral said:
Go here
Find the latest stock rom for your country (and perhaps your carrier) and flash it
No need to have Hard SPL for that
Click to expand...
Click to collapse
I'm now downloading the initial dutch R1 firmwire, could that one work?

Mopral said:
Go here
Find the latest stock rom for your country (and perhaps your carrier) and flash it
No need to have Hard SPL for that
Click to expand...
Click to collapse
Alright so I got an R1 original rom (I now realize that the R3's were originals aswell) and it worked! I'm not sure if it was the different rom or the formatting with FAT32 that did but it works again. So I'd like to thank everyone who was kind enough to reply.
The device is incredibly slow now but now I can use the hard-DSL installer, right? DOes anyone have a suggestion for a good rom to use?

laurence0609 said:
You really need have to flash the HardSPL first as, based in your above post, you still have not done that. It will be useless to flash cooked ROM with that. If you can still power on your phone and you have an activesynch in your computer, i suggest you download the HardSPL first and update your phone using your PC. If you are successful doing that, then you can flash all you want.
Click to expand...
Click to collapse
DON'T hard-spl if you're going to flash a stock ROM. And especially if you're going to use SEUS.
Try flashing the R3A first. The R1s are way slow, as you've seen.