Thanks for the info
err, u dont need a sd card though.
u can just flash it from the computer.
xorphan, as imatrix said, you don't actually need an SD card to upgrade. I thought what you thought too - probably because you read the documentation. It does suggest that you need one but I can tell you that I've just done mine without it.
Have fun
you can't flash on the computer with a 4gig SD in the slot
Related
I just purchased a TopRam 2GB MiniSD Card for my 8125. It came with a USB card reader too. I'm pretty new to all this, so I was wondering what steps do I need to take (if any), before I can use this card? Do I just put it into the device and start using it, or do I need to format it first?
Yes
Yes I did that no problem... Scandisk 2GB.
Re: Yes
kull said:
Yes I did that no problem... Scandisk 2GB.
Click to expand...
Click to collapse
No you don't need to format it! Just put it in and go! When you install it and your device reads it then it will do to what it needs to do use it.
NO
you're card may perform better if not.
Hi. My Windows computer is on it's last leg; I'm not sure if it will be able to run long enough for me to flash a ROM and I don't want my phone to break. Which brings me to my question:
Can you install ROMs from the Storage Card?
Thanks.
your device must be HardSPL'd.
for the Herald, drag the .nbh file to the root of the card after renaming it HERAIMG.nbh.
SDHC cards are not compatible, and the larger the partition that the .nbh is on (usually the main one), the longer it will take to flash.
Be patient. You will think that something has gone wrong, but nothing has. It takes a really really really long time (like 10-15 mins)(for real, not like the RUU)
is it better?
is it better to flash it to the sd carD?
pr0cl1v1ty said:
is it better to flash it to the sd carD?
Click to expand...
Click to collapse
Your not quite flashing it to the sd card, the sd card acts as the img file needed for the phone to accept the flash. Another thing is to make sure the sd card is formatted fat32. Personally I have a 1gb card that I partitioned down to 100mb formatted fat32 for my flashing needs
its not necessarily better or worse to flash it from the sd, its just useful if your device doesnt feel like connecting for some reason.
thanks! i appreciate the quick response.
fzzyrn said:
your device must be HardSPL'd.
Click to expand...
Click to collapse
I had to HardSPL my phone to install the ROM I'm using now.. once you do it once is the phone permenately HardSPL'd, or do u have to run the HardSPL everytime u change ROMs?
Thanks.
hardspl with sd card
I understand that Flash rom with sd card is possible, but hardspl with sd card is possible too? Thanks
wshader said:
Another thing is to make sure the sd card is formatted fat32. Personally I have a 1gb card that I partitioned down to 100mb formatted fat32 for my flashing needs
Click to expand...
Click to collapse
will it work if it's formatted fat16? how long do you think it would take for a 2gb card (1 partition) to flash a rom?
thanks,
-adam
i have tried this with 2 different micro sd cards. both 1gb. 1 sandisk, the other is a samsung. both work fine in the g1 and if i connect to my laptop (windows) i can access the files and everything as normal. when i right click and tell it to format however it ejects itself and i have to remount. i do not have an adapter to put it in my card reader, so this is the only way i can do it. can anyone tell me what i'm either doing wrong or a quick fix for this?
dont know man cuz i didnt hve that problem sorry dude
The g1 doesn't like it when you do that. If you don't have the adapter. Your only option that I know of is to format it is from android itself in the system options. Sorry to hear about your situation
kxxstarr said:
i have tried this with 2 different micro sd cards. both 1gb. 1 sandisk, the other is a samsung. both work fine in the g1 and if i connect to my laptop (windows) i can access the files and everything as normal. when i right click and tell it to format however it ejects itself and i have to remount. i do not have an adapter to put it in my card reader, so this is the only way i can do it. can anyone tell me what i'm either doing wrong or a quick fix for this?
Click to expand...
Click to collapse
I have/had the same issue, so i will tell you what i did and maybe it will help. I formatted my sd card on the RC33 update in fat32 and from the computer.(when the g1 liked the sd card).
My suggestion if you don't want to downgrade to upgrade..is to stick the card in another phone that can connect to your computer and format it that way.
Upgraded to cupcake (what ever version you want). Then the g1 was reading my 4gb card wrong. So i removed all info on the sd card just copied to folder on pc and formatted the sdcard through the phone. From there it was reading the card correctly. To go on, i then partitioned with apps2sd. Placed all info back on sd card and waa laa...like magic...or dream...or hero...i dunno confusing...who's on first?
Hello everyone,
I am new to the hero and just rooted my phone using kitchen. I wanted to get an 8GB card and wanted to know what the process was. I didn't want to mess anything up so how do I change micro sd cards. I did a search but was unable to find the answer.
Are you using apps 2 sd?
If yes there is a guide
If no, then copy your data to your pc.. unmount the card(or turn the phone off) .. insert new card, format... then copy stuff back.
cool, never used apps 2 sd. Thanks! Will wait to get a new rom after.
Just remember its a mounted filesystem, if you just took it out that would be like unhooking your computer's hard drive. Probably going corrupt some data.
So just make sure the phone is off before switching cards?
i just made that mistake last night, burnt up an 8gb card, make sure phone is off!!!!!!!!!!!!!!!!!!!!!!!!
You don't need to turn the phone off. Right in SD Card and Storage Settings, there's a button to unmount the SD card. Hit that button, eject the card, then put the new one in and copy all the data back on via USB.
lv2bll said:
i just made that mistake last night, burnt up an 8gb card, make sure phone is off!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
You shouldn't have been able to burn a card doing that. Maybe confuse the filesystem on it. If worse comes to worst, reformat the sdcard.
What items on the SD card are necessary? I did the root and there are two recovery images on there. I haven't done anything else besides rooting the phone.
Sorry dumb question, rooting doesn't change when changing cards right?
Since there is an SDcard discussion. Every time I play music the songs glitch at the beginning of the track and sometimes mid song..but always at the start UNLESS the phone is awake, then it plays fine.
Could it be the class of the card or that the phone wakes up after the end of every track and glitches? I still have the stock 2 gig card and was looking to get a higher class / more capacity to swap if that is the case. if not I'll just stick to my ipod shuffle.. bleh.
vrundmc said:
What items on the SD card are necessary? I did the root and there are two recovery images on there. I haven't done anything else besides rooting the phone.
Sorry dumb question, rooting doesn't change when changing cards right?
Click to expand...
Click to collapse
Nothing on the SD card is strictly necessary. Rooting and applying ROMs does not affect the SD card.
vrundmc said:
What items on the SD card are necessary? I did the root and there are two recovery images on there. I haven't done anything else besides rooting the phone.
Sorry dumb question, rooting doesn't change when changing cards right?
Click to expand...
Click to collapse
Necessary? Nothing. The phone should run without the sdcard even installed. Some applications aren't going to like it not being there, like the camera.
New card partition question
Stock hero with new 8 gb card. Will be rooting and using fresh 2.0 and apps2sd. Question is: Do i need to partition the card first before rooting or will it happen on its own when i flash new rom? thanks
eydoc said:
Stock hero with new 8 gb card. Will be rooting and using fresh 2.0 and apps2sd. Question is: Do i need to partition the card first before rooting or will it happen on its own when i flash new rom? thanks
Click to expand...
Click to collapse
No and no.
You only need to partition the card if you want it partitioned and partitioning it has zero to do with rooting or with applying a new ROM.
posguy99 said:
No and no.
You only need to partition the card if you want it partitioned and partitioning it has zero to do with rooting or with applying a new ROM.
Click to expand...
Click to collapse
If i want to run apps2sd do i need to partition the card?
Yes, you'll need a ext partition for a2sd.
-------------------------------------
Sent via the XDA Tapatalk App
Hey, sorry if this has been asked before (I'm sure it has, but I couldn't find anything through the search). I just bought an 8gb class 4 sd card that I'm looking to upgrade to from the stock N1 card. What exactly do I need to do to have everything run smoothly? Do I just need to copy everything from my N1 to my PC then pop in the new card and copy back or is there something special I need to do? I'm running CM 5.0.5.2 (upgrading to 5.3 after card swap) and Amon Ra 1.7.0.
Thanks for any help.
Basically you answered you own question. Only thing is are you planning to do app2sd?
Hi,
Thanks for confirming. I just wanted to make sure that I wouldn't run into any problems just copy/pasting. I was considering apps2sd but I dont use the phone for games or anything big like that so I wasn't sure if I really needed it.
Also, I'm pretty sure I need to format the new card before I copy everything back, right? Will the phone prompt/perform the format or do I need to do that from a pc?
Format the card to fat32. I use the pc to format. If you do want app2sd, the card is easily partition using Amon_Ra recovery. I would suggest to do partition now if you know this is something you want to so. Little less work now that when you have a lot on the card. This is just my view point on the matter. I love app2sd. I have 75 apps and only use 10 mb of internal memory with cm rom it is fast.
thanks for the clarification. How much space is recommended for the apps2sd partition and can it be expanded later on?
e/
I dont have a computer with an sd card reader, is there another way?
e2/
nvm, I can do it with the phone apparently
DreamScar said:
thanks for the clarification. How much space is recommended for the apps2sd partition and can it be expanded later on?
e/
I dont have a computer with an sd card reader, is there another way?
Click to expand...
Click to collapse
512mb is all you'll really need. You can use recovery and do USB mass toggle to access it. But one thing I think u might need class 6 card for ap2sd
Ok, so I've partitioned the sd card (ext-2 size 512, fat32 remainder). Do I need to do the upgrades to ext-4 or do I leave it as is?
A2SD will work with either ext2/3/4...
I'm running cyanogenmod 5.0.5.3 with apps2sd and amon_ra recovery 1.70 on a 4gb sd card planning on getting a 32gb card how do I swap this out and keep my existing ext.?