Hey, sorry if this has been asked before (I'm sure it has, but I couldn't find anything through the search). I just bought an 8gb class 4 sd card that I'm looking to upgrade to from the stock N1 card. What exactly do I need to do to have everything run smoothly? Do I just need to copy everything from my N1 to my PC then pop in the new card and copy back or is there something special I need to do? I'm running CM 5.0.5.2 (upgrading to 5.3 after card swap) and Amon Ra 1.7.0.
Thanks for any help.
Basically you answered you own question. Only thing is are you planning to do app2sd?
Hi,
Thanks for confirming. I just wanted to make sure that I wouldn't run into any problems just copy/pasting. I was considering apps2sd but I dont use the phone for games or anything big like that so I wasn't sure if I really needed it.
Also, I'm pretty sure I need to format the new card before I copy everything back, right? Will the phone prompt/perform the format or do I need to do that from a pc?
Format the card to fat32. I use the pc to format. If you do want app2sd, the card is easily partition using Amon_Ra recovery. I would suggest to do partition now if you know this is something you want to so. Little less work now that when you have a lot on the card. This is just my view point on the matter. I love app2sd. I have 75 apps and only use 10 mb of internal memory with cm rom it is fast.
thanks for the clarification. How much space is recommended for the apps2sd partition and can it be expanded later on?
e/
I dont have a computer with an sd card reader, is there another way?
e2/
nvm, I can do it with the phone apparently
DreamScar said:
thanks for the clarification. How much space is recommended for the apps2sd partition and can it be expanded later on?
e/
I dont have a computer with an sd card reader, is there another way?
Click to expand...
Click to collapse
512mb is all you'll really need. You can use recovery and do USB mass toggle to access it. But one thing I think u might need class 6 card for ap2sd
Ok, so I've partitioned the sd card (ext-2 size 512, fat32 remainder). Do I need to do the upgrades to ext-4 or do I leave it as is?
A2SD will work with either ext2/3/4...
I'm running cyanogenmod 5.0.5.3 with apps2sd and amon_ra recovery 1.70 on a 4gb sd card planning on getting a 32gb card how do I swap this out and keep my existing ext.?
Related
ok guys. i am running a rooted g1 with the 2.6.3 hero build. i am running it on the 1 gb sd card that the phone came with. the speed of the build sucks and lags because of the card. i am going to purchase a 4 gb or 8 gb class 6 card today to improve speed and will also get on a newer hero rom. my question is, when i put all the data that is on my old card to my new card will i still be on root, and will i still be on hero? will it be plug and play basically? will i have to reformat to fat32 or will it already be on there? one last thing..how do you partition the sd card? i will need to do this so i can jump to a newer build of the rom..
anything helps.
thanks,
Nick
The rom and root .... is based on the phone it's self, not the SD card.
You are best to install an Ubuntu live cd .... and use G-Parted to partition your SD card.
Serious Answer!
I'm assuming you are already running apps2sd right now. So when you get your new card you will NOT be able to just swap them out. Best thing to do is format your new card (just like other poster said in ubuntu, look in my sig for tut) in 3 partitions fat32, ext3, and linux-swap. Then load up your hero rom on your sd card and flash away. And yea you will still be rooted.
Im getting a bigger memory card for g1. Have Cyanogen 4.2.15.1 Do i have to format the new card for everything to work or just pop it in. Backed up sd card on laptop. Any answers appreciated. thanx ( by forma ti mean wipe partition card and such)
You're going to have to, at the very least, format it to FAT32 so that you can actually use it. Second, you will have to make an ext2, 3 or 4 partition if you want Apps2sd to work. Setting a 3rd partition for swap would be up to you if you decide to use it or try a hero rom in the future. Look at the current partitions on the memory card you use and just create similar partitions for the new memory card. You will also have to copy your current ext2, 3 or 4 partition to your new memory card if you currently have Apps2sd enabled on your current rom because that is where all the apps are stored.
thanx
i figured i would but just wanted to make sure. Thanks for the reply and you guys do such a great job that i wanted to say thanks for all the hard work you guys do.
OK, so I just upgraded to a Transcend 8GB Class 6 MicroSD card from the stock card that was included with the phone originally.
Now, my issue is I have it partitioned for APP2SD and such for Nightlys.
If I partition the new card, I know I'll obviously take all the base data off my old card and put it on the new one. Now, all the apps and stuff on my ext3 part of the card....
Should I just:
A) Do nandroid backup +ext, put new card in and restore (I'm just taking a shot in the dark and assuming this would work)
B) Other method?
Any advice would be great
Shoot, my apologies.
I posted this in the development section by mistake. I had too many tabs open!
Well i just recently got a 32GB card. All i done was any apps i had on the sd card i moved back to the phone. Backed-up anything i had on old card (mp3s, photos etc). Plugged in new sd card, formatted it then thats about it.
Only thing that changed was beautiful widgets, but all that had to do is download some little file again.
Also, when partitioning, how much do you suggest for ext3? I was thinking about 32MB SWAP, 256MB Ext3.....ext3 is used for apps, right?
Thanks.
uoY_redruM said:
Also, when partitioning, how much do you suggest for ext3? I was thinking about 32MB SWAP, 256MB Ext3.....ext3 is used for apps, right?
Thanks.
Click to expand...
Click to collapse
personally i don't think 256 is enough. i currently have 756 and have 100mb free.
you can just do a nandroid +ext backup and it will restore it correctly as all it does is tar the sd ext directories then extract them on restore. obviously the partition has to be larger or equal in size.
i didnt partition my card at all. Is that bad? Wont the phone do it when you format it?
zok-star said:
i didnt partition my card at all. Is that bad? Wont the phone do it when you format it?
Click to expand...
Click to collapse
Are you using the FroYo FAT method or the A2EXT method?
wdfowty said:
Are you using the FroYo FAT method or the A2EXT method?
Click to expand...
Click to collapse
?? No idea, i just formatted the card via the phone. so im guessing froyo fat?
Hey guys. I'm a noob to the nook. Got mine yesterday and flashed nookie froyo 0.6.8. Flashed auto nooter 3.0 before that (not sure that was necessary, but I did it anyway - Was it necessary?)
I digress... I'm confused about the sd card and from what I've read in the forum, it's still not clear to me. So here are my questions and I apologize if they were answered elsewhere. If someone could link a post that might be helpful that would be great!
1. Which roms run off the external sd card?
2. Is it better to run off the external sd card?
3. I'm using an 8 gig class 10 card, but only 1.78 is accessible and and less than 500 mb of open space is left.
4. NookcolorUMS is confusing. I've tried mounting all partitions and cant access the extra space. And yes I did format it after flashing so it's allocated using FAT32.
Any help or direction to helpful posts would be really greatly appreciated.
Thanks!
treylemkn said:
Hey guys. I'm a noob to the nook. Got mine yesterday and flashed nookie froyo 0.6.8. Flashed auto nooter 3.0 before that (not sure that was necessary, but I did it anyway - Was it necessary?)
I digress... I'm confused about the sd card and from what I've read in the forum, it's still not clear to me. So here are my questions and I apologize if they were answered elsewhere. If someone could link a post that might be helpful that would be great!
1. Which roms run off the external sd card?
2. Is it better to run off the external sd card?
3. I'm using an 8 gig class 10 card, but only 1.78 is accessible and and less than 500 mb of open space is left.
4. NookcolorUMS is confusing. I've tried mounting all partitions and cant access the extra space. And yes I did format it after flashing so it's allocated using FAT32.
Any help or direction to helpful posts would be really greatly appreciated.
Thanks!
Click to expand...
Click to collapse
1. I think CM7, NookieFroyo, and the HC build have all been made to run off the SD.
2. I don't think so; it does give you the nice "sandbox" feel that you can't screw anything up though. It is MUCH faster to run off the internal memory; and with the multi boot ability in my opinion there really is no reason to run off an SD card.
3. I'd look at the card in some type of partition manager; there may be some partitions that can not be seen otherwise. Have you already flashed a rom to the card?
4. Not sure.
themoe said:
1. I think CM7, NookieFroyo, and the HC build have all been made to run off the SD.
2. I don't think so; it does give you the nice "sandbox" feel that you can't screw anything up though. It is MUCH faster to run off the internal memory; and with the multi boot ability in my opinion there really is no reason to run off an SD card.
3. I'd look at the card in some type of partition manager; there may be some partitions that can not be seen otherwise. Have you already flashed a rom to the card?
4. Not sure.
Click to expand...
Click to collapse
I flashed the image to the external sd card. It put the boot image after flashing on the card. I just reformatted the card and can now see it in the nook.
New questions.
1. Is there a way to create a nandroid back up?
2. How do I get to clockwork recovery without using the image on the sd card?
Maybe more questions later.
Thanks!
themoe said:
1. I think CM7, NookieFroyo, and the HC build have all been made to run off the SD.
2. I don't think so; it does give you the nice "sandbox" feel that you can't screw anything up though. It is MUCH faster to run off the internal memory; and with the multi boot ability in my opinion there really is no reason to run off an SD card.
3. I'd look at the card in some type of partition manager; there may be some partitions that can not be seen otherwise. Have you already flashed a rom to the card?
4. Not sure.
Click to expand...
Click to collapse
Multi-boot ability? I still have so much to learn. Is it basically a matter of rearranging the partitions on the internal storage? Would the best link be http://forum.xda-developers.com/showthread.php?t=959461
?
Can the primary partition continue to boot stock unrooted Nook ROM?
* Go to the parallel Development Forum to find threads on:
- Multi-boot (very simple to install)
and
- SD card booting versions of CM7, Honeycomb and Froyo
* Within the thread of each of those three, you will find instructions for adjusting things (installing missing capabilities, partitions, etc).
* Download Free Easeus Partition Manager (sp?) to extend 4th partition while looking at SD card in Windows, this will give Android's /sdcard folder the rest of your card. Then Download Free Notepad++ (linux file format text editor) to edit a file as described in those threads. See threads for more details.
* Download Free Win 32 Disk Imager to backup SD card in Windows ("read" backs up card, "write" burns an image to card, the latter is how you create bootable ROM on SD card).
Hello,
Ok, first, the briefing:
I used verygreen´s Size-agnostic SD Card image and CM7 installer for SD Cards to run CM7 (installer 1.3 -> nightly 87 + gapps) on my nook. Works great. Kudos verygreen.
I tested 3 different SD cards to do so. Sadly, none of my Class 4 cards worked and only an old Class 2 2g Toshiba did the trick. Since I don´t intend to have a big fight with my wife about why I need to buy a 2nd. class 4 SD card this week, I am keeping the 2g Toshiba. (I know, I know, I should´ve bought a Sandisk Class 4 to begin with but they're a not easy to come by here in Brazil. At least, not a real Class 4).
And this is my problem:
The CM7 sees only 350 - 400 MB available in the "SD Card". That is hardly enough for HD games. Meanwhile, the "internal" memory has over 700 MB available.
What I'd like to do is:
Change the SD card partition to move some of the available space from the "internal" memory to the "SD card" on CM7.
Question:
Is it possible? How? Is it gonna mess up the CM7?
Alternatively, I was considering WobbleTheHutt method to swap SDcard and emmc. But, before I do it, I need to know if this method would affect the booting of the stock Nook. Does anyone knows?
Thnx.
I freaking did it!
I freaking did it! And it's running smoothly!
Ok! For those who want to give it a try.
First, I used Gnome Partition Editor for Windows to decrease the size of the EXT partition. Then, I used Minitool Partition Wizard Home edition to increase the FAT partition.
I actually created a image of my original SD card, just in case, but it was unnecessary since it didn't mess any of my data or apps. Still, as a security measure, I suggest who ever try this to also create a backup image of the original SD card.
santosacm said:
I freaking did it! And it's running smoothly!
Ok! For those who want to give it a try.
First, I used Gnome Partition Editor for Windows to decrease the size of the EXT partition. Then, I used Minitool Partition Wizard Home edition to increase the FAT partition.
I actually created a image of my original SD card, just in case, but it was unnecessary since it didn't mess any of my data or apps. Still, as a security measure, I suggest who ever try this to also create a backup image of the original SD card.
Click to expand...
Click to collapse
Hey! Nice idea.
I was looking for a method to backup my CM7(verygreen) SD card but I don't have a card reader with me currently.
Is is possible to backup complete SD card(all 4 CM7 partitions) using just the nook and windows??
P.S. I have Clockworkmod recovery installed onto emmc, if it's possible through that?
thanks.
santosacm said:
I freaking did it! And it's running smoothly!
Ok! For those who want to give it a try.
First, I used Gnome Partition Editor for Windows to decrease the size of the EXT partition. Then, I used Minitool Partition Wizard Home edition to increase the FAT partition.
I actually created a image of my original SD card, just in case, but it was unnecessary since it didn't mess any of my data or apps. Still, as a security measure, I suggest who ever try this to also create a backup image of the original SD card.
Click to expand...
Click to collapse
Why didn't you use GPE for both steps? I use it all the time and it works fine.
____________________________________________________
Sent from NookColor CM7 uSD using Tapatalk