OK, so I just upgraded to a Transcend 8GB Class 6 MicroSD card from the stock card that was included with the phone originally.
Now, my issue is I have it partitioned for APP2SD and such for Nightlys.
If I partition the new card, I know I'll obviously take all the base data off my old card and put it on the new one. Now, all the apps and stuff on my ext3 part of the card....
Should I just:
A) Do nandroid backup +ext, put new card in and restore (I'm just taking a shot in the dark and assuming this would work)
B) Other method?
Any advice would be great
Shoot, my apologies.
I posted this in the development section by mistake. I had too many tabs open!
Well i just recently got a 32GB card. All i done was any apps i had on the sd card i moved back to the phone. Backed-up anything i had on old card (mp3s, photos etc). Plugged in new sd card, formatted it then thats about it.
Only thing that changed was beautiful widgets, but all that had to do is download some little file again.
Also, when partitioning, how much do you suggest for ext3? I was thinking about 32MB SWAP, 256MB Ext3.....ext3 is used for apps, right?
Thanks.
uoY_redruM said:
Also, when partitioning, how much do you suggest for ext3? I was thinking about 32MB SWAP, 256MB Ext3.....ext3 is used for apps, right?
Thanks.
Click to expand...
Click to collapse
personally i don't think 256 is enough. i currently have 756 and have 100mb free.
you can just do a nandroid +ext backup and it will restore it correctly as all it does is tar the sd ext directories then extract them on restore. obviously the partition has to be larger or equal in size.
i didnt partition my card at all. Is that bad? Wont the phone do it when you format it?
zok-star said:
i didnt partition my card at all. Is that bad? Wont the phone do it when you format it?
Click to expand...
Click to collapse
Are you using the FroYo FAT method or the A2EXT method?
wdfowty said:
Are you using the FroYo FAT method or the A2EXT method?
Click to expand...
Click to collapse
?? No idea, i just formatted the card via the phone. so im guessing froyo fat?
Related
I bought a Transcend 4gb class 6 SD card, and partitioned it with paragon, now that ext2 partition has dissapeared and all Im left with is basically 3gs of space on a 4g card. I cant get it through paragon or anything on windows, is there a certain way to recover that partition or have I perminently fried it.
get the format software
hey I went through the same thing... I got panasonic's software called SD Memory Card Formatting Software Ver.2.0, I used it format by sd and got the original space back... good luck
Use ubuntu. If you need a tut look in my sig.
supremeteam256 said:
Use ubuntu. If you need a tut look in my sig.
Click to expand...
Click to collapse
Or if you don't have/don't want ubuntu do it right from the phone, there's a very good guide in the development section on how to do it... you do need CM 1.3 and up recovery though
Good luck
How would I upgrade my linux Swap to say 96mb without erasing SD card?
I know there is a way I saw the thread before but now I can't find it.
Thanks
Nick
Also is there a way to upgrade to ext3 or 4 without deleteing content on sd card?
If there is not a way to do this part how would I take apps off sd card and then push them back onto sd card so they run as if installed once again?
Considering I have to re format sd card in order to upgrade to ext3 or 4.
I'm doing my friends sd card for him and he doesnt want to re install apps and plus its knowledge I would like to know
Thanks,
Nick
You would use the resize command in parted to change the swap size. Also, if you use RA's 1.3.2 recovery, you can easily upgrade to ext4 without losing anything
none of the above should cause dataloss as long as its done right
bansawbanchee said:
How would I upgrade my linux Swap to say 96mb without erasing SD card?
I know there is a way I saw the thread before but now I can't find it.
Thanks
Nick
Also is there a way to upgrade to ext3 or 4 without deleteing content on sd card?
If there is not a way to do this part how would I take apps off sd card and then push them back onto sd card so they run as if installed once again?
Considering I have to re format sd card in order to upgrade to ext3 or 4.
I'm doing my friends sd card for him and he doesnt want to re install apps and plus its knowledge I would like to know
Thanks,
Nick
Click to expand...
Click to collapse
If you can, look in to loading an Ubuntu or Gparted live CD. It's makes everything soooo much easier than using parted, and it will allow you to do everything you asked about.
Is moving to 96 a larger or smaller partition than what you have now? And if it is larger, do you have the space to resize it w/o disturbing the other partitions?
PsychoPomp said:
Is moving to 96 a larger or smaller partition than what you have now? And if it is larger, do you have the space to resize it w/o disturbing the other partitions?
Click to expand...
Click to collapse
I am at 32mb on this specific sd card now. I would like to change it to 64mb and if it runs smoothly change it to 96mb and see how that goes.
-I would prefer to do everything on the phone directly and not on computer.
where could I find these commands in order to change my swappyness?
-I have 2gb ext2 and the rest fat32 on an 8gb card. 32 mb is swap.
-I want to upgrade ext2 to ext4 and then swap from 32mb to 64 mb.
-I want to do all of this without using computer and only parted.
-Also if it happens to be easier to reformat and do it the original way through parted than fine but then where could I find the commands to push apps from root of sd card to the apps2sd area that cyan pulls them from so I dont have to reinstall all apps. I have over 260 apps on this card that are installed and it would be a pain to install agian.
Thanks,
Nick
Hey, sorry if this has been asked before (I'm sure it has, but I couldn't find anything through the search). I just bought an 8gb class 4 sd card that I'm looking to upgrade to from the stock N1 card. What exactly do I need to do to have everything run smoothly? Do I just need to copy everything from my N1 to my PC then pop in the new card and copy back or is there something special I need to do? I'm running CM 5.0.5.2 (upgrading to 5.3 after card swap) and Amon Ra 1.7.0.
Thanks for any help.
Basically you answered you own question. Only thing is are you planning to do app2sd?
Hi,
Thanks for confirming. I just wanted to make sure that I wouldn't run into any problems just copy/pasting. I was considering apps2sd but I dont use the phone for games or anything big like that so I wasn't sure if I really needed it.
Also, I'm pretty sure I need to format the new card before I copy everything back, right? Will the phone prompt/perform the format or do I need to do that from a pc?
Format the card to fat32. I use the pc to format. If you do want app2sd, the card is easily partition using Amon_Ra recovery. I would suggest to do partition now if you know this is something you want to so. Little less work now that when you have a lot on the card. This is just my view point on the matter. I love app2sd. I have 75 apps and only use 10 mb of internal memory with cm rom it is fast.
thanks for the clarification. How much space is recommended for the apps2sd partition and can it be expanded later on?
e/
I dont have a computer with an sd card reader, is there another way?
e2/
nvm, I can do it with the phone apparently
DreamScar said:
thanks for the clarification. How much space is recommended for the apps2sd partition and can it be expanded later on?
e/
I dont have a computer with an sd card reader, is there another way?
Click to expand...
Click to collapse
512mb is all you'll really need. You can use recovery and do USB mass toggle to access it. But one thing I think u might need class 6 card for ap2sd
Ok, so I've partitioned the sd card (ext-2 size 512, fat32 remainder). Do I need to do the upgrades to ext-4 or do I leave it as is?
A2SD will work with either ext2/3/4...
I'm running cyanogenmod 5.0.5.3 with apps2sd and amon_ra recovery 1.70 on a 4gb sd card planning on getting a 32gb card how do I swap this out and keep my existing ext.?
[Solved]Okay, I currently have a 2gb (don't even know the brand) MicroSD in my rooted Dream/G1. I am running SuperD 1.10.2. I have Apps2SD setup already. I just bought a PNY 4gb Class 4 MicroSD yesterday and I want to use it. How do i transfer EVERYTHING to it? And will I have to re-install all the apps that were installed on the 2gb card?
Thanks, xKr4zex
Krician said:
Okay, I currently have a 2gb (don't even know the brand) MicroSD in my rooted Dream/G1. I am running SuperD 1.10.2. I have Apps2SD setup already. I just bought a PNY 4gb Class 4 MicroSD yesterday and I want to use it. How do i transfer EVERYTHING to it? And will I have to re-install all the apps that were installed on the 2gb card?
Thanks, xKr4zex
Click to expand...
Click to collapse
The possibilities.....
You could do it the hard way or the easy way.
Hard way is by using adb and do
command prompt
adb pull /system/sd /sdbackup/sd
and partition your new card using amon_ra recovery
then
command prompt
adb shell
mount -a
exit
cd c:\sdbackup
adb push sd /system/sd
and that should do it.
Easy way
Make a nandroid backup with ext,
save the contents of you sdcard (especially nandroid folder)
partition your new sdcard with amon_ra recovery with your desired ext partition,
restore your backups from your old card,
place new card in phone,
nandroid restore and reboot.
You should be good.
Thanks for the reply. I also wanted to know, if I already have apps2sd and Linux swap enabled, do I have to disable>power off>new card>restore>re enable apps2sd and Linux?
Krician said:
Thanks for the reply. I also wanted to know, if I already have apps2sd and Linux swap enabled, do I have to disable>power off>new card>restore>re enable apps2sd and Linux?
Click to expand...
Click to collapse
You shouldn't have to re-do anything once your partitions are in place.
If your card is setup like FAT/SWAP/EXT3 (using EXT3 for example) for card 1 then as long as your partitions are FAT/SWAP/EXT3 for card 2 then everything should work just fine. Even if your swap partition is a different size it should be alright. The only thing is that if card 1 (old card) EXT3 partition is 500mb and if you are using 300mb of that card you need to have 300mb+ on card 2 EXT3 partition so that all of your data can fit on there after you do your nandroid restore.
I did this method personally when I went from a 8gb to a 16gb.
Old card was 8gb composed of ~7gb (FAT)/64mb (swap)/500mb (ext3)
New card is 16gb composed of ~13gb (FAT)/96mb (swap)/1gb (ext3)
I simply performed a nandroid+ext backup
Backed up my entire sdcard onto my desktop (including nandroid directory)
Put the new card in and repartitioned with Amon_RA recovery as posted above.
Restored the data from my backup that was on my desktop
Performed a nandroid+ext restore
Done. Very easy.
Just do it. You'll be amazed how complicated your making this.
I just did this this morning before seeing this thread and i did exactly as it says here. I only encountered one problem...My Music playlists didnt transfer how do i get those? I still have my old sd card with all the stuff in it by the way.
Thanks! Solved.
Krician said:
Thanks! Solved.
Click to expand...
Click to collapse
Remember to edit the title of your original post with FIXED or SOLVED
kalpa11 said:
I just did this this morning before seeing this thread and i did exactly as it says here. I only encountered one problem...My Music playlists didnt transfer how do i get those? I still have my old sd card with all the stuff in it by the way.
Click to expand...
Click to collapse
I think there are third party apps that will do that. I'm not sure what file that is exactly.
Hello,
Ok, first, the briefing:
I used verygreen´s Size-agnostic SD Card image and CM7 installer for SD Cards to run CM7 (installer 1.3 -> nightly 87 + gapps) on my nook. Works great. Kudos verygreen.
I tested 3 different SD cards to do so. Sadly, none of my Class 4 cards worked and only an old Class 2 2g Toshiba did the trick. Since I don´t intend to have a big fight with my wife about why I need to buy a 2nd. class 4 SD card this week, I am keeping the 2g Toshiba. (I know, I know, I should´ve bought a Sandisk Class 4 to begin with but they're a not easy to come by here in Brazil. At least, not a real Class 4).
And this is my problem:
The CM7 sees only 350 - 400 MB available in the "SD Card". That is hardly enough for HD games. Meanwhile, the "internal" memory has over 700 MB available.
What I'd like to do is:
Change the SD card partition to move some of the available space from the "internal" memory to the "SD card" on CM7.
Question:
Is it possible? How? Is it gonna mess up the CM7?
Alternatively, I was considering WobbleTheHutt method to swap SDcard and emmc. But, before I do it, I need to know if this method would affect the booting of the stock Nook. Does anyone knows?
Thnx.
I freaking did it!
I freaking did it! And it's running smoothly!
Ok! For those who want to give it a try.
First, I used Gnome Partition Editor for Windows to decrease the size of the EXT partition. Then, I used Minitool Partition Wizard Home edition to increase the FAT partition.
I actually created a image of my original SD card, just in case, but it was unnecessary since it didn't mess any of my data or apps. Still, as a security measure, I suggest who ever try this to also create a backup image of the original SD card.
santosacm said:
I freaking did it! And it's running smoothly!
Ok! For those who want to give it a try.
First, I used Gnome Partition Editor for Windows to decrease the size of the EXT partition. Then, I used Minitool Partition Wizard Home edition to increase the FAT partition.
I actually created a image of my original SD card, just in case, but it was unnecessary since it didn't mess any of my data or apps. Still, as a security measure, I suggest who ever try this to also create a backup image of the original SD card.
Click to expand...
Click to collapse
Hey! Nice idea.
I was looking for a method to backup my CM7(verygreen) SD card but I don't have a card reader with me currently.
Is is possible to backup complete SD card(all 4 CM7 partitions) using just the nook and windows??
P.S. I have Clockworkmod recovery installed onto emmc, if it's possible through that?
thanks.
santosacm said:
I freaking did it! And it's running smoothly!
Ok! For those who want to give it a try.
First, I used Gnome Partition Editor for Windows to decrease the size of the EXT partition. Then, I used Minitool Partition Wizard Home edition to increase the FAT partition.
I actually created a image of my original SD card, just in case, but it was unnecessary since it didn't mess any of my data or apps. Still, as a security measure, I suggest who ever try this to also create a backup image of the original SD card.
Click to expand...
Click to collapse
Why didn't you use GPE for both steps? I use it all the time and it works fine.
____________________________________________________
Sent from NookColor CM7 uSD using Tapatalk