any roms i can use? pplease help - MDA III, XDA III, PDA2k, 9090 Software Upgrading

i have a siemens sx66 w/o the camera built in. I have been trying to use the other ROMs on the site but the say that they arent for my phone. if you could link me to some roms that would be great. thanks in advance.

That depends on what you want to do and how good you are at flashing.
WM5 or WM2003? Everything in this forum area is for SX 66 but you do have to be careful about the no Camera part. However, the newest WM5's you either get the no-camera rom [TuMu 1.4] or the Helmi ROM which seems to auto dect the Camera [only need to remove the camera bat from the startup].
If you want to do WM2003, I suggest to start out easy with the SX66 Standardization Project site. This is in fact how I started with flashing my SX 66... then progressed to this site with WM5.
If you are going to do WM5 I suggest to start with Helmi BA Aku.2.3 v1 Beta. IMO its a good WM5 ROM to start off with. However, it is beta and if you never have flashed before you may want to think twice before doing it.
Good Luck!

help! i cant get any one to work with it!! nothings working!!!! the rom keeps saying that it wasnt made for my phone. i already have wm2003 (not SE) and i would love to upgrade to WM5. if anyone could please help just let me know asap. thanks

You have to change the operator ID in the nk.nbf file first, which BTW for our phones is AT%CID?
In most of the ROMs there is a *.bat to change the operator code.
Also, do a little searching/reading the Wiki's you should be able to get this information and not freaking out on the forums

but how! please give me step by step.. lol.. thanks

not true at all
odie3 said:
You have to change the operator ID in the nk.nbf file first, which BTW for our phones is AT%CID?
In most of the ROMs there is a *.bat to change the operator code.
Also, do a little searching/reading the Wiki's you should be able to get this information and not freaking out on the forums
Click to expand...
Click to collapse
this is not true in the least, and youre supposed to be a hardcore flasher eh! hah sorry dude I dont mean to tease but thats useless work you dont need.
For the siemens sx66 or and blue angel POS you can just get the MAupgradeUT_noID prog (helmi has a folder named PH20B1 in AKU 2.3 That is the folder with ALL you need minus ROM)
copy your desired hacked MS stack into that folder, cradle your Angel and bam start it up. No more bs id codes or whatever, works everytime.

nstefanelli said:
but how! please give me step by step.. lol.. thanks
Click to expand...
Click to collapse
and man youre just a lazy bum wanting to mooch software

Re: not true at all
atom069 said:
this is not true in the least, and youre supposed to be a hardcore flasher eh! hah sorry dude I dont mean to tease but thats useless work you dont need.
For the siemens sx66 or and blue angel POS you can just get the MAupgradeUT_noID prog (helmi has a folder named PH20B1 in AKU 2.3 That is the folder with ALL you need minus ROM)
copy your desired hacked MS stack into that folder, cradle your Angel and bam start it up. No more bs id codes or whatever, works everytime.
Click to expand...
Click to collapse
Hard core I am not - thank you very much. I use update operator ID unless that will not work. Then I use NoID if I have to - I was unsure if it was proper to use the NoID from the start. So next time I'll STFU and the you do the support.

Re: not true at all
odie3 said:
atom069 said:
this is not true in the least, and youre supposed to be a hardcore flasher eh! hah sorry dude I dont mean to tease but thats useless work you dont need.
For the siemens sx66 or and blue angel POS you can just get the MAupgradeUT_noID prog (helmi has a folder named PH20B1 in AKU 2.3 That is the folder with ALL you need minus ROM)
copy your desired hacked MS stack into that folder, cradle your Angel and bam start it up. No more bs id codes or whatever, works everytime.
Click to expand...
Click to collapse
Hard core I am not - thank you very much. I use update operator ID unless that will not work. Then I use NoID if I have to - I was unsure if it was proper to use the NoID from the start. So next time I'll STFU and the you do the support.
Click to expand...
Click to collapse
Hah sorry man Im just giving you a hard time! You know Americans are punkasses
You can use the same prog for all flashing, radio to BT to whatever

actually odie3 is right, you should try the set operator method first as it is much more reliable to use BaUpgradeUt.exe as it hardly ever fails, but MaUpgradeUt_noID.exe (for me anyway) fails about 30% of the time you use it.

:lol:

Midget_1990 said:
actually odie3 is right, you should try the set operator method first as it is much more reliable to use BaUpgradeUt.exe as it hardly ever fails, but MaUpgradeUt_noID.exe (for me anyway) fails about 30% of the time you use it.
Click to expand...
Click to collapse
hah of course hardware. Different units will have different problems that's a given.
I've flashed all of these roms (2003se to wm5 back to 2003se to wm5 again) doing benchmarks roughly 50X+ now inbetween with different models. My buddy has 2 qteks and another the tmobile and have had zero fail on the noID prog.
midget you have must hardware issues bra (must be orange units). they are the same program with the same outcome without the Country/id code. I was just stating no use in doing extra work when not needed.
I've used your rom as well and it ran like poo on a siemens sx66 which you said runs great on your orange. Makes sense

Related

New Radio 1.13.1

Found following file on FTP: BA_BRPT_Radio_11310
After looking at the header it seems to be a radio rom
Type II
Mobel ID: PH20B
Carrier: BRIGH001
Version: 1.13.1
Instructions:
Download file
ftp://xda:[email protected]/Radio_1.13.1_Type_II/BA_BRPT_Radio_11310.exe
Extract files
Download file
ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
Extract files
Move radio.nbf from Extracted BA_BRPT_Radio_11310 to Extracted MaUpgradeUt_noID
Run the MaUpgradeUt_noID
Have fun
AS Said I have not tested this nor Have I made a wiki page
is there any idea about this upgrade?
I see there's a link to here from wiki.
Bumping the topic. Anyone? I cant test the stack because I dont have a SIM now. Should we think some company is developing another 1.4x rom?
z_rudy said:
I see there's a link to here from wiki.
Bumping the topic. Anyone? I cant test the stack because I dont have a SIM now. Should we think some company is developing another 1.4x rom?
Click to expand...
Click to collapse
Ok - I downloaded the 1.13.01 Radio this afternoon and so far used it whilst connected to the Logi-Tech Pro BT Headset that I use when I'm in the car.
I have to say, I've not noticed any improvement betweeen this and the 1.13.00 but to be fair, I've only used the phone a few times..
I'll keep you posted if anything obvious comes up..
Personally, I can't see this as evidence that another company is developing an additional 1.4X ROM..
I guess we'll see how it goes..
Cheers!
Move radio.nbf from Extracted BA_BRPT_Radio_11310 to Extracted MaUpgradeUt_noID
Run the MaUpgradeUt_noID
I've downloaded these 2 files and there isn't radio.nbf in the Extracted BA_BRPT_Radio_11310.
Where can I find it?
Can anyone post it here?
Help please because my father have some problems of connecting to my BT headset.The voices are so crappy, and some people cannot hear him loud enough.
HyperMalac said:
Move radio.nbf from Extracted BA_BRPT_Radio_11310 to Extracted MaUpgradeUt_noID
Run the MaUpgradeUt_noID
I've downloaded these 2 files and there isn't radio.nbf in the Extracted BA_BRPT_Radio_11310.
Where can I find it?
Can anyone post it here?
Help please because my father have some problems of connecting to my BT headset.The voices are so crappy, and some people cannot hear him loud enough.
Click to expand...
Click to collapse
When you run the exe, it creates the radio.nbf in a temp folder. You just need to do a search for it on the computer.
SPV M2000 + Jabra BT200 - No difference
Cheers
alan_n_mills said:
When you run the exe, it creates the radio.nbf in a temp folder. You just need to do a search for it on the computer.
Click to expand...
Click to collapse
Stop - You need to Extract the file using WinRAR or similar then extract MaUpgradeUt_noID into the same folder.. From there, you need to Double-click the MaUpgradeUt_noID!
As is known with this method, you sometimes have to run it twice.. The first time, you sometimes get an error..
HyperMalac said:
Help please because my father have some problems of connecting to my BT headset.The voices are so crappy, and some people cannot hear him loud enough
Click to expand...
Click to collapse
This will have nil effect to the BT Headset.. This is the Radio which sends the signal from the phone to the transmitter.. You might need to update your Bluetooth Radio Stack to the latest available..
See Wki - Link in Signature!
Cheers!
Hi Philly i will report newest radio from xdaIIs
Hi Phil
i test radio 1.13.01 and cant find what a different witn old version ( 1.13 ) and i test this in thailand with my own device ( XDAIIs )
Would u mind if i ask u something ? i have a problem in Rom version 1.42 Nl tmobile .. when i have a call most of people who say with me will alway say my voice is Echo !!!! is this Bug ???
Last night i Flash back to 1.40 O2 asia with AudioPatch and test to call . That ok and caller say my voice Clear and better than 1.42. is this real ? and if i use AudioPatch in 1.42
it will fix a problem same a 1.40 rom ???
Pls u answer me
God be with u
Cheer ... time for beer now Yeah ha ...
ps. sory in my very Poor english ... -___-"
Re: Hi Philly i will report newest radio from xdaIIs
[email protected] said:
Hi Phil
i test radio 1.13.01 and cant find what a different witn old version ( 1.13 ) and i test this in thailand with my own device ( XDAIIs )
Would u mind if i ask u something ? i have a problem in Rom version 1.42 Nl tmobile .. when i have a call most of people who say with me will alway say my voice is Echo !!!! is this Bug ???
Last night i Flash back to 1.40 O2 asia with AudioPatch and test to call . That ok and caller say my voice Clear and better than 1.42. is this real ? and if i use AudioPatch in 1.42
it will fix a problem same a 1.40 rom ???
Pls u answer me
God be with u
Cheer ... time for beer now Yeah ha ...
ps. sory in my very Poor english ... -___-"
Click to expand...
Click to collapse
Well, I guess you could try the Audiopatch.. I'm not too sure what the outcome will be but if you do try, please be prepared to have to put it right if you don't get the answer you want.. Sometimes it's down to experimentation..
all this probably is, is a carrier update, added new channels or frequencies... its not a major update, although it may improve reception.
MrPhilly said:
alan_n_mills said:
When you run the exe, it creates the radio.nbf in a temp folder. You just need to do a search for it on the computer.
Click to expand...
Click to collapse
Stop - You need to Extract the file using WinRAR or similar then extract MaUpgradeUt_noID into the same folder.. From there, you need to Double-click the MaUpgradeUt_noID!
As is known with this method, you sometimes have to run it twice.. The first time, you sometimes get an error..
HyperMalac said:
Help please because my father have some problems of connecting to my BT headset.The voices are so crappy, and some people cannot hear him loud enough
Click to expand...
Click to collapse
This will have nil effect to the BT Headset.. This is the Radio which sends the signal from the phone to the transmitter.. You might need to update your Bluetooth Radio Stack to the latest available..
See Wki - Link in Signature!
Cheers!
Click to expand...
Click to collapse
I've upgraded my ROM and Radio too and it works well.
And I've tried to upgrade my father's BA too, but I've realised there's no fresher stack what he uses.So I think there's no solution until we get a fresher stack...
Salutations
Why not get radio 1.15 now?
z_rudy said:
Why not get radio 1.15 now?
Click to expand...
Click to collapse
Yeah - Good point.. However, when this was discussed, there was only the 1.13.10 available..
Echoing z_rudy's comments though and agreeing that you should now update to 1.15!
Cheers!

Can I use a Wizzard rom on a xdaIIs?

Can anyone tell me how to use this rom
ftp://xda:[email protected]/Wizard/Roms/Tmobile/RUU_Prodigy_2170702_217_20710_TMO_US.exe
and put it on a xdaIIs?
Do I need to use a noid.exe and if so wihci one should I use?
You can't do it like that - it would be lovely if you could but a rom for the Wizard would need to be ported for it to work on the BlueAngel. To try it would give you a very nice doorstopper.
Ahh thanks for the warning!! So can this be ported from the wizard to the xdaIIs?
I would love to use the WM5 but as far as I have learned WM5 does not support Blackberry Enterprise aka Instant mail, and I have not found any CAB files that will work on my XDAIIs with WM5 installed. I am getting pretty good at upgrading and downgrading tho :-(
All of the TuMa editions are using a Wizard Port (allbeit an old version). They are really quite stable now and I think we're getting close to a rom to stick with
As far as Blackberry support, I haven't seen a BA WM5 rom with it however I imagine it could be ported but then again, I am no porter!
Kind regards
Lee
I found a German BB connect cab that will install on the BA WM5 that ivan made but right at the very end of the install it says cannot load instal module. You click ok and the program tells you it installed. When you go to find the BB settings eve in the BA it is under \windows and when you try to execute it the unit hangs up.
I assume that this cab is looking for the T-Mobile info to complete the install so we would have to have one of the very bright individuals in this forum find out what it is looking for exactly and fix that part of it. The BA WM5 would work with BB connect

help needed on aku3

Hi folks
could any of the little genius in this forum told me why , every time i try to install a Aku3 rom on my wizard (fully unlocked,and with the good ipl/spl verson) i got stuck after the second reset on the green windows screen ,no way to go further but hard reset the device , at the end back to a lower rom ,in my case the molsky's rom wich i have to say is perfect (thanks Molsky) ,but i 'd like to try a fully aku3 rom only once, damned it !
Genius
leroy06 said:
Hi folks
could any of the little genius in this forum told me why , every time i try to install a Aku3 rom on my wizard (fully unlocked,and with the good ipl/spl verson) i got stuck after the second reset on the green windows screen ,no way to go further but hard reset the device , at the end back to a lower rom ,in my case the molsky's rom wich i have to say is perfect (thanks Molsky) ,but i 'd like to try a fully aku3 rom only once, damned it !
Click to expand...
Click to collapse
Men give me credit for some genius. All the genius I have lies in this; when I have a subject in hand, I study it profoundly. Day and night it is before me. My mind becomes pervaded with it. Then the effort that I have made is what people are pleased to call the fruit of genius. It is the fruit of labor and thought.
i have the solution but as im not a genius the question wasnt meant to me, so im not going to answer...
ROFL, had to say that, sorry, i dunno how to solve ur problem...im using farias closed test aku 3.2 on my qtek 9100 and is working like a charm...
BTW vilem...why r u so sure he was referring to u??? LOL
i will be the self proclaimed genius for a minute... but it helps to know which aku3 rom you are trying to flash to..... riddle us that and maybe we can find you an answer
help needed on Aku3 rom
Thanks for the fellows who pretend to have the solution but wouldn't give it (there's not that much genius after all!) .
i stupidly thought this forum was for helping each others , but never mind .
well , i've tried the ell 's rom , i was betta tester for faria 's and hadd the problem.
could it be something with the extended rom , cause after the hard reset there is no track of it ...
leroy06 said:
Thanks for the fellows who pretend to have the solution but wouldn't give it (there's not that much genius after all!) .
i stupidly thought this forum was for helping each others , but never mind .
well , i've tried the ell 's rom , i was betta tester for faria 's and hadd the problem.
could it be something with the extended rom , cause after the hard reset there is no track of it ...
Click to expand...
Click to collapse
well i dont know anything about ell's, but i think faria's first release had that problem, he had to correct it and re-upload it (dont qoute me, i havent been able to keep up with his thread much less this board) But try to re-download faria's beta and try it again...
Me, too
I've had the same problem, both with ell's and with faria's (version 3), it reaches 99% on the phone, then says finished on the PC, but never actually finishes. Board members suggested various things (rolling back to an earlier rom, cid unlocking) which I tried best I could. In particular, when I tried to cid unlock, which involves a long list of instructions including installing activeperl, the perl program reported a missing file and failed. I've installed several other roms, but perhaps thanks to the clever cooks (xelencin and molski) the cid unlocking was taken care of.
There is another thread on this issue which didn't seem to reach a conclusion.
Trashman said:
i have the solution but as im not a genius the question wasnt meant to me, so im not going to answer...
ROFL, had to say that, sorry, i dunno how to solve ur problem...im using farias closed test aku 3.2 on my qtek 9100 and is working like a charm...
BTW vilem...why r u so sure he was referring to u??? LOL
Click to expand...
Click to collapse
He said Little Genius, I'm not that big...
btw, im using farias 3.2 and it has a minimal extrom, after a hard reset it finishes in about 3 seconds and it dont reset the device...it works that way...but u have to run a "setup" thats located in mi "mi documents/extras/runonce" but some bug makes the file "temperamental" so u have to run it several times sometimes...after the setup finish the device reset and u have the complete rom...
But all this only works when the rom proccess is finished, so this is not helpfull to the one having problem with not passing 99% ...
AKU3 problem
Well i've done all this with both rom even the run once on faria's ,it start ok with everything but after not the first re start but the second re start ,it froze on the green windows ...
leroy06 said:
Well i've done all this with both rom even the run once on faria's ,it start ok with everything but after not the first re start but the second re start ,it froze on the green windows ...
Click to expand...
Click to collapse
Faria's AKU3.2 Rom doesn't have a Green Windows Splash Screen...
yea, its like a washed light blue...maybe he refers to that?
in my case i had problems in the begining, but i did a hard reset and everithing worked fine from then...
AKU3 problem
no i refer to the windows WM5 direct push screen you got just opening your device after the version number !
IMO it is more a light blue than a green...
did u tried a hard reset?
Ak3 problem
sure i did try several time ,anyway after the windows screen that the only way to start the device again ,and then it starts wihtout the extended rom ,how do you explain that ...
kyphur said:
Faria's AKU3.2 Rom doesn't have a Green Windows Splash Screen...
Click to expand...
Click to collapse
Just you won't forget.
leroy06 said:
sure i did try several time ,anyway after the windows screen that the only way to start the device again ,and then it starts wihtout the extended rom ,how do you explain that ...
Click to expand...
Click to collapse
I don't think anyone can explain this, before you tell us exactly which "AKU3" ROM you're using. (The green screen puzzles me)
agree with vilem, r u sure u have the farias rom? (u r part of the test team, u received a mail from him with the password and a .doc with instructions and so on? what is the exact name of the file u downloaded and from where? )
and about the extrom question i quote myself again:
Trashman said:
im using farias 3.2 and it has a minimal extrom, after a hard reset it finishes in about 3 seconds and it dont reset the device...it works that way...
Click to expand...
Click to collapse
Aku 3 problem
Well i think i already said that a couple of time before ,i've tried all the AKU3 rom around ,ell ,faria and one other fellow i forgot the name but i don't think that's really important because all these roms were supposed to work with my wizard and did with many others , i can't join you a picture of this screen but everybody working on wm5 knows that damned windows screen which use to be blue on aku2 rom and it's now clear green on the aku3 rom (so far) ,just after the bootloader .
dunno the others aku3 but farias one dont have a green splash there...and i only have experience with farias version so i cant help you, sorry...
btw...farias version is in closed test so far, so unless u r part of the test team u hardly tried that particular one...

Upgrading to wm6 on Xda IIs

hi mates. is it possible to upgrade my Xda IIs with Windows mobile 5 or 6.? right now it has 2003.
please help me if its possible. or tell me some site where i will get some step-by-step proceidure.
Regards
I know that there is a WM6 for BA out there for a week, but have not tried out yet. Try search around here in this forum first for the WM5, which is very rich
There is NO WM6 for the XDAIIs (Blue Angel).
There are numerous WM5 ROMS for the BA though.
Everything you need to know is here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home
ruk_design said:
hi mates. is it possible to upgrade my Xda IIs with Windows mobile 5 or 6.? right now it has 2003.
please help me if its possible. or tell me some site where i will get some step-by-step proceidure.
Regards
Click to expand...
Click to collapse
You made time to do multiple posts but didn't spend a few seconds on searching?
the_scotsman said:
There is NO WM6 for the XDAIIs (Blue Angel).
There are numerous WM5 ROMS for the BA though.
Everything you need to know is here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home
Click to expand...
Click to collapse
There is, and I have it as well, dude. Some Vietnamese at handheldvn.com forum are using it and discussing quite a bit on it. Myself have not tried it out, because I have no time for the moment.
(http://www.handheld.com.vn/forum/showthread.php?t=55894)
link for the ROM is here:
http://www.4shared.com/file/15740822/f5c66922/ROM_53505_AKU_352_WM6_.html
I am surprise why it is not announced in this welknown forum?? Is the one at handheldvn a fake one?
thangbom said:
There is, and I have it as well, dude. Some Vietnamese at handheldvn.com forum are using it and discussing quite a bit on it. Myself have not tried it out, because I have no time for the moment.
(http://www.handheld.com.vn/forum/showthread.php?t=55894)
link for the ROM is here:
http://www.4shared.com/file/15740822/f5c66922/ROM_53505_AKU_352_WM6_.html
I am surprise why it is not announced in this welknown forum?? Is the one at handheldvn a fake one?
Click to expand...
Click to collapse
Thanx a lot dude. but is that file is in english? i dont think so. and also it will work for my XDA IIS. and also in case of some trouble. should i downgrade to my old rom.? just let me know. i also have the old rom image.
Yes, English
The forum is in Vietnamese, but the ROM is entirely in English. I have seen some screen shots, and they are all English. Have fun, dude. I am waiting for a vacation when I can make change to this one
I doubt it is windows mobile 6, the guy has not shown the version in any of there screeshots and apart from that, one of the screenshot attached here , dats xplodes R5 screenshot
if i remember well...it was said that the new rom is about 64MBs...however you can download from the link mentioned a 34Mb file in which extrom folder contains a 7Mb camera template cab...
I've tried it
I was also quite doubtful there would be an R6 for our BA, but since I'm about to re-install it, I decided to download it and give it a try.
And I confirm that it's still WM5. Some of the icons have changed, but it's still the same old thing with some WM6 icons.
Some details:
OS build: 15706.3.5.2
the default device name = PDAViet. Which is a known ROM "builder" on the UNI Forum.
Need some more testing, but all and all it seems to be working.
So, maybe it's all new, but it may have a few elements you may care for.
It works...
Hey maaan, thanks a lot, this ROM is perfect... I have Upgraded it at about 30 minutes ago, and i'm trying it.... I think it is not WM5 with WM6 icons, because everything is like in WM6....perfect, wifi works (i have tried to find wifi-net, it found it in 2 seconds...), BT too (i have tried only with my USB-BT on PC, and connect it), GUI is beautiful, nice themes.... PERFECT....
only one thing is bad - there isn't any FILE EXPLORER, but you can install total commander with active sync and then you can search your SD card or memory Phone works too (I have 1.15 Radio ROM)
And one thing which i don't like (but i had got same problem with explode ROM too) : Camera has got one white pixel.... so big white dot on the photo but nevermind..... this is super ROM Thank you again buddy...
So, it is right, it is WM5 with really realistic WM6 Interface.... but still perfect ROM
Thanks for the recent posts
Thanks all for the recent posts. I saw quite many positive applause on this version at the Vietnamese forum. Take care!
I knew WM6 doesn't yet exist for BA...
I'll give this one a miss....
yes thanks a lot. i also upgraded my O2 XDA IIS and its working perfect. great Rom . one little question. when i display my syatem info. its showing 96 MB ram instead of 127 Mb. and also. its not displaying any Extrom version.
i wrote all my info below.. so give me some info about this.
but overall the rom version is perfect thanks a lot.
ROM VERSION 5.35.05.WWE
ROM DATE 05/08/07
RADIO VERSION 1.12.00
PROTOCOL VERSION 1337.42
EXTROM VERSION
Hah some noob has cooked my rom with my kitchen and now publish it as hes own how silly the people can be i know every bug which it may cause,i know the reason for the bugs (and solution to them) but it is too hard to fix them. We will see what the noob will do with my rom
xplode said:
Hah some noob has kooked my rom with my kitchen and now publish it as hes own how silly the people can be i know every bug which it may cause and i know the reason for the bugsm but it is too hard to fix them. We will see what the noob will do with my rom
Click to expand...
Click to collapse
Thanks, xplode, I'll keep an eye for you in case you got stuck with Vietnamese
also for great WM6 theme you all can use the brand new Wisbar Advance 3 Beta2 it has Wm6 theme builtin
Explode please, can you upload it? Or is it possible to find it on the web?
when i was using 2003 on my O2 XDA IIS. i perform hard reset by pressing the top power button and the reset button. and now i have upgraded to wm2005 and again i am doing this. but it wont work. its only soft resetting. so anyone know how to perform hard reset. so i will get my registry setting to defaults. cause i made many mess in the registry for tweaking

WM6 HTC_Charmer Works

Okay I wanted to Apologize to everyone, It took some time to get my device flashed to WM6 and it’s know where I wanted. The only difference I did is not allowing the extrom to customize with HR.
No need to put any guide out if you read the forums you will get wm6 working.
Thanks.
Window Mobile6(thx 2 Vlodeck & Nocturne)
Rom version: 10.2.0.8 WWE
Rom date: 2/03/07
Radio version:02.19.21
Protocol version: 4.1.13.09
Your charmer is just the same as with mine.
I think it is just setup problem why you can not connect to GPRS.
I have flashed a TouchFlo version WM6 to my charmer (WWE version), it works well.
that you cannot flash wm6 does not mean others can't, so please stop shouting "wm6 does not work".
many people are using it - and many people are satisfied with it - imho this is proving that WM6 works. most of this people ha CIDs locked devices - and they have no problems. I don't khow why you have yor problems, but you have just few possibilities:
1) you are lazy to read forums and finding solutions, or
2) you do not understand what are you reading about or
3) you are using some really old radio and this may be the negative effect, or
4) your charmer is somehow damaged machine, bad memmory blocks or stuff like that
Remember, that charmer is just one, there are no variants, no different generations. All your problems are pointing to something, that must be completely different from others. Focus on radio at first...you have the old one (the same I have - mine works fine)
Another thing that may affect the gameplay is your computer - try to flash from another one. There are no more possibilities.
Ulymanchild said:
1. I’ve tried RUU update with wm6 essentials.002 and it wouldn’t flashed
Click to expand...
Click to collapse
it means JUST that your device is CID locked
Ulymanchild said:
2. Tried shelltool flashing & xbeta, and extracted OS and it worked, but it had bugs with elatepushservice.exe and not able to go GPRS Internet.
Click to expand...
Click to collapse
search for differences - nobody has the same problems
Ulymanchild said:
3. Repeated the process and 3-5 times and if you’re not careful you may crash you phone ( I did) had to get a new one.
Click to expand...
Click to collapse
Unlock your phone and you will never brick it. If you are rather buying new machine than finding solutions, get rid of WM devices, buy Nokia and leave us alone.
Ulymanchild said:
4. New phone has IPL: 2.06.001 SPL: 2.06.001 and it’s now even harder to try to flash
Click to expand...
Click to collapse
harder? It's the same, why should it be harder?
Ulymanchild said:
5. Able to flash WWE but it’s still wm5, oh well I guess I will wait two months and get a HTC_Touch but it will need to learn to Flash from German to English.
Click to expand...
Click to collapse
mentioned 1000 times in this forum...I cannot believe that somebody can still ask this...
The purpose of my thread was not to attack anyone. I think the information and effort here is very good and all the people like yourself and others developers are doing an outstanding job!
When you try and try and fail, I know it’s frustrating and some of us continue to try. I know I’m not done trying; I still want to be able to have my Charmer to operate under WM6.
I want to make it clear to everyone; I did take my time to read all the forums.
(PLEAES READ FORUMS PPL)
I’m not saying don’t try upgrading, (PLEASE DO TRY!) and don’t give up, take a break to clear your head and find other means to your goal.
All I’m giving is a caution. I flashed my device with out taking my time to go thru the step’s and it crashed. Lucky the T-mobile Company replaced it because my contract is not up!!!!
And lasting thing before I go, I’m not attacking anyone this is General for all!!! I thought forums were for discussions purpose and to help each other find solutions. So when I put information out here, it’s to see if anyone had same issues and maybe give me a some idea to resolve.
Yuking said:
I have flashed a TouchFlo version WM6 to my charmer (WWE version), it works well.
Click to expand...
Click to collapse
you flashed a touchflo version to charmer?
tried to find it, but no way! where can i find this ROM?
rgds,
ap0ll0
ap0ll0 said:
you flashed a touchflo version to charmer?
tried to find it, but no way! where can i find this ROM?
rgds,
ap0ll0
Click to expand...
Click to collapse
Touchflo version sounds good. Where, where, where!!!!!
People, please do not get so excited about that touchFLO. Firstly, it doesnt work as it should. You have to press softkey to launch it first. Secondly its slow and inconvenient.
And thirdly, happy to hear that Ulymanchild finally got the wm6 issue sorted out
vlodeck said:
People, please do not get so excited about that touchFLO. Firstly, it doesnt work as it should. You have to press softkey to launch it first. Secondly its slow and inconvenient.
And thirdly, happy to hear that Ulymanchild finally got the wm6 issue sorted out
Click to expand...
Click to collapse
vlodeck, have you tried the Wizard versions then?
I just like to try new things out, if I didn't i would still be on my original T-Mobile wm5 rom.
cheers
Sorry, these two days I did not come to here.
Here is the URL of TouchFlo version of WM6 (Charmer), but it is in Chinese. (Fantastic B4, with Touch FLO for 818+).
You should register first.
http://www.it1861.net/bbs/viewthread.php?tid=5480&page=1&fromuid=2244#pid36089
PS1: This rom is not created by me! I just quote it~
PS2: If you can not download it or do not want to register, just tell me a place I can upload it.
PS3: My charmer: 3.08.0001/3.08.0001
Thanks.
vlodeck said:
People, please do not get so excited about that touchFLO. Firstly, it doesnt work as it should. You have to press softkey to launch it first. Secondly its slow and inconvenient.
And thirdly, happy to hear that Ulymanchild finally got the wm6 issue sorted out
Click to expand...
Click to collapse
Yes, I agree with you strongly. I don not think using TouchFLO is a good way to operate my charmer. I flashed it and tried it, but I will not use it again but show it to others.
Vlodeck, I wanted to thank you for those kinds words also, I wanted to put out that it was allot easier for me to bootload essential v.002 by extracting the nk.nbf and placed it on 000.4. I think the trick was nb2nbf_wizard.
Oh and I was able to cid unlock with Lokiwiz03 after I flashed to wm6 YOU GUY’s ARE THE BEST!

Categories

Resources