Helmi BA WM2k5 AKU3.0 Beta (v.1.1 Beta)
01. Ramdisk 32mb (just plain ramdisk no more experimental crap)
02. Storage Card Extended_ROM (Create ExtROM dir on ur Storage Card) so u can hv full size wm storage.
03. MMS Composer v3.0.16.6 Built On ROM, send/receive ok mp4, 3gp,jpg,etc (Just need to Enable with MMS_Enable.cab, included in Extrom Pack)
04. Album v.3.0 (Built 17747)
05. Camera v.2.21 (Built 19307) Record Video/Picture and Send to MMS ok (when sending picture the dialog might dont hv a caption on MMS)
06. PocketMSN, Hotmail Ok.
07. Wifi/BT/Ir ok.
08. No limitation on installin App (no problem when installin SPB Plus etc)
09. ActiveSync Ok.
10. Extra App Built in. (Data Backup, Flight Mode, Phm Registry, etc)
11. Speed tweakin enable, sorry for the Beta 1 release I dont include speed tweakin. this release is included now....
12. Mp4, Amr, Wav, wma, as ringtone is workin now.
13. New Shell Icon (Control Panel, Folder, etc).
EDIT:
14. BTA2DP WORK see attachment.
Known issues:
01. There no internal integration beetween Comm Manager and Wifi, cos Different Driver beetween Wizard & BA.
02. Sometimes System complain about missing Pimg app (I've strip them out, cos its useless , fix is below PIMG)
03. When BT On, IR On, WIFI On, ActiveSync On, the tray might flick.
04. Some help file and Some Silly Picture/images has been strip out from the ROM to create space for more usefull app.
Tips:
01. Disable Sound (Sound & Notification >> Events) might help system speed.
02. Disable Sound in phone (Phone Settings >> Keypad >> Off) might help phone speed.
03. Backup ur PIM with active sync first (Contact, email, etc) before u upgrade to AKU3.0 if u upgrade it from old rom (anything below AKU3.0 ROM)
been use it for 4 days now... seems stable...btw its still beta, and might be not suitable for daily use, input is welcome...
download here:
ftp://xda:[email protected]/Uploads/Blue Angel/Helmi_WM2k5_AKU3.0_32mb_v1.1b.rar
or here
http://micmeo.com/BlueAngel/AKU_3.0/Helmi_WM2k5_AKU3.0_32mb_v1.1b.rar
thanks micmeo ur really helpfull..thanks!.
For anyone download before please re-upgrade ur ROM with the newest one, since the previous AKU.3.0 has a critical bug. (missing files)
Please read the readme file, I dont hv time to update Wiki page, I think the information in Readme file is enough to flash ur rom and since no 'real' extended rom so no further preparation is needed, but u might consider to make ur old Extended_ROM size to 128kb to make more storage space for ur device.
Btw The EXTROM folder is included Indonesian GPRS/MMS Setting, if u not Indonesian just delete it and change with ur county/region setting CAB, just follow the ilustrated method on the Cfg.txt/Autoconfig.txt file to make changes that suite ur need.
With the Global Contacts Access plugin from Microsoft U can use the central/global exchangeserver address book. (Thanks to xdaradar for the info)
look here:
https://www.microsoft.com/windowsmobile/downloads/global/default.mspx
Operator AutoConfig (GPRS/MMS):
For Most Asia and O2UK Operator Autoconfig
go here:
http://forum.xda-developers.com/viewtopic.php?t=57279&postdays=0&postorder=asc&start=125
And for middle East GPRS/MMS/WAP AutoConfig:,
Batelco,Etisalat,Eygept Vodaphone,Fastlink,Jawalnet,Maroc Telecom,Mobinil,MTC,Oman Mobile,QTel,Syriatel,Vodaphone,Wataniya,WIND
go here:
http://forum.xda-developers.com/viewtopic.php?t=57279&postdays=0&postorder=asc&start=175
Thanks for your diligent work,I will test this rom as soon as possible
WoooooooooooooooooooW
thank you
Dowloading Now
well done helmi_c,
aku3 has a nice startup screen eh
testing it now. thanks
can you show us some images from the new rom, thanks
Looks good
I've just installed the new rom and so far so good. Installation went smootly, active sync is working (and much faster then on aku2.3).
The first thing I notived was the option to SKIP the moving of the appointment during the start-up. This has been something that has annoyed me a lot. Finally the option to skip it .
The other thing I have noticed are the soft-buttons: They are not assinged (and default to "active sync").
Other then that, it looks good and I will start to install some software now.
Thanks for this one.
First of all
i cant install arabic software in this Rom
Installation was unsuccessful
any help
Isaac said:
First of all
i cant install arabic software in this Rom
Installation was unsuccessful
any help
Click to expand...
Click to collapse
hmm... try this 2 cab... install OpenCert.CAB first if it still cant, try the FinalCert.CAB then. If it still cant.. I'm confuse then.. or send ur cab to my mail at [email protected] let me try it.
EDIT: this attachment is not necesary I've already fix the issues in ROM. sorry for this.
sint2006 said:
can you show us some images from the new rom, thanks
Click to expand...
Click to collapse
its just the same looks, but the OS is new built, and maybe the newest wm5 available.
helmi_c said:
Isaac said:
First of all
i cant install arabic software in this Rom
Installation was unsuccessful
any help
Click to expand...
Click to collapse
hmm... try this 2 cab... install OpenCert.CAB first if it still cant, try the FinalCert.CAB then. If it still cant.. I'm confuse then.. or send ur cab to my mail at [email protected] let me try it.
Click to expand...
Click to collapse
I had tried both of the cab files but still the same I cant install the Arabic software
I will attached my Arabic cab file her
BTW it was working perfectly in Helmi_BA_WM2k5_AKU_2.3_32mb rom
Please help because without this software I cant read or write Arabic and then this rom will be useless for me
Isaac said:
helmi_c said:
Isaac said:
First of all
i cant install arabic software in this Rom
Installation was unsuccessful
any help
Click to expand...
Click to collapse
hmm... try this 2 cab... install OpenCert.CAB first if it still cant, try the FinalCert.CAB then. If it still cant.. I'm confuse then.. or send ur cab to my mail at [email protected] let me try it.
Click to expand...
Click to collapse
I had tried both of the cab files but still the same I cant install the Arabic software
I will attached my Arabic cab file her
BTW it was working perfectly in Helmi_BA_WM2k5_AKU_2.3_32mb rom
Please help because without this software I cant read or write Arabic and then this rom will be useless for me
Click to expand...
Click to collapse
oke, btw the file u send is quite old, I hav a new one, and I'll try to make it work with this rom. give me some time..
Helmi you rock. This ROM is quick, and works flawlessly for my needs. AS is super fast and the new look of the icons is pretty neat.
Thanks and I can't wait to see the improvements you have in store for the next release.
helmi_c said:
Isaac said:
helmi_c said:
Isaac said:
First of all
i cant install arabic software in this Rom
Installation was unsuccessful
any help
Click to expand...
Click to collapse
hmm... try this 2 cab... install OpenCert.CAB first if it still cant, try the FinalCert.CAB then. If it still cant.. I'm confuse then.. or send ur cab to my mail at [email protected] let me try it.
Click to expand...
Click to collapse
I had tried both of the cab files but still the same I cant install the Arabic software
I will attached my Arabic cab file her
BTW it was working perfectly in Helmi_BA_WM2k5_AKU_2.3_32mb rom
Please help because without this software I cant read or write Arabic and then this rom will be useless for me
Click to expand...
Click to collapse
oke, btw the file u send is quite old, I hav a new one, and I'll try to make it work with this rom. give me some time..
Click to expand...
Click to collapse
you have a new Version of Arabic Windows Mobile (FJE) ???
Take your time
Okay found a problem. Pocket Hack Master 3.33 won't install. Says "Critical Component Missing"
Never had this before. Tried reinstalling it several times, no go. What version of the .NET framework does this ROM run?
Not a lot to say really....
...except, absolutely stunning!
Everything works first time that I have tried, Pocket MSN, all the Apps, even WiFi in Comm Manager (Clicked on 'Settings' within Comm Manager, turned on WiFi... worked off the bat, and switches on/off no probs!)
Off to take a look at the A2DP... don't expect too much, no matter what I did with AKU2.3 it wouldn't start the service... but I'll give it a shot )
Off to rebuild the server under the stairs as an Exchange Box to make the most of the Push functionality !
Edit: EtenPack Call Filter doesn't play... 'Cannot open 'PfUi'...' not an issue, I can use an alternative!
Shocked and awed
Helmi, what can I say?
This is just incredible.
It's better than any professionally-made BA Rom I've seen.
Congratulations, and thanks for this amazing ROM.
Superb job helmi - really, just an excellent ROM.
I have two (minor) issues with the push email though;
Each time a new email arrives I get an alert (with sound) along with a preview of the message - in the AKU 2.3 ROM you did I would get a silent notification just saying 'xx messages unread'. I much preferred the older type of notification.
Spam is now appearing in the inbox - even though Outlook has filtered it into it's junk mail folder - again the AKU 2.3 ROM didn't do this.
Is this AKU3 standard functionality now or are these settings we have some sort of control over?
spkr4thdd said:
Not a lot to say really....
...except, absolutely stunning!
Everything works first time that I have tried, Pocket MSN, all the Apps, even WiFi in Comm Manager (Clicked on 'Settings' within Comm Manager, turned on WiFi... worked off the bat, and switches on/off no probs!)
Off to take a look at the A2DP... don't expect too much, no matter what I did with AKU2.3 it wouldn't start the service... but I'll give it a shot )
Off to rebuild the server under the stairs as an Exchange Box to make the most of the Push functionality !
Click to expand...
Click to collapse
spkr4thdd, I would be interested in knowing how you got ur exchange server setup, something I have been thinking of doing myself. Any chance of a tutorial or walkthrough/tips? Probably best by PM. Thanks.
ftp://xda:[email protected]/Uploads/Blue Angel/Helmi_WM2k5_AKU3.0_32mb_v1.1b.rar <--- File size is 555KB. That ROM probably changed by someone.
And there is another ROM at: ftp://xda-developers.com/Uploads/Blue Angel/Helmi_WM2k5_AKU3.0_32mb_v1.1b_BAD_ROM.rar. Should I make a mirror for it?
Hi,
why is this download only 555kb and not like other ROM's 28Mb or more?
Sorry Micmeo is ahead of me
Related
8)
I created this topic due it's terrible hard to find the simplest software what you had standard under wm2003.
We Still miss some Simple Stuff,
For all who downloading, this software works for me with Mamaichs testversion or v3 version or whatever :twisted:
ftp://xda:[email protected]/Uploads/Blueangel/wm5_test/ba_wm5_patch3.rar
With This use at your own risk reg thing from M. you are able to see you extended rom of 128k in explorer
http://forum.xda-developers.com/download.php?id=6826
Already installed the patches from the wiki:
http://wiki.xda-developers.com/index.php?pagename=BA_WM5_Patches_ChangeLog
Still Missing some standard software for your Blueangel? YES.
Anybody Found A Working Midlet Manager? (Damn i need this one :evil: )
MMS is solved for me here thanx ncruz http://forum.xda-developers.com/viewtopic.php?t=27968&start=0
By Downloading this cab:
ftp://xdaupload:[email protected]/Blueangel/WM5_ArcsoftMMSv2_From_Universal.CAB
Also Found A Working fax Machine For My Device KSE TrueFax 2.09
Anybody else who has working operator software originally under 2003 that fit 2005 please share.
Thanx.
BlueAngel Operator Standard Sofware For WM2005 Here
Also found a sim manager,
At least with this one i am able now to create or delete a contact on my simcard, :twisted:
Think this one was also on wm2003 on my device, i've seen it before,
Hi there!!!!
Thanks for the efforts.But I think u hv not done the full search in the whole forum.Try logging on to FTP and search in Himalaya section for a zip folder "2577" .This is suppose to be the AUto Run type Extended ROM, which contains numerous softwares which are tested and Run on WM5..
You will simply love it.Try reading more in Himalaya section.
BlueAngel Operator Standard Sofware For WM2005 Her
hdubli said:
Try logging on to FTP and search in Himalaya section for a zip folder "2577" .This is suppose to be the AUto Run type Extended ROM, which contains numerous softwares which are tested and Run on WM5..
You will simply love it.Try reading more in Himalaya section.
Click to expand...
Click to collapse
Well, done, already spitted trough all big topics for wm2005 last weekend, horrible to do so by the way(spended more than 20 hours on this fora, shall not mention all others):evil: for a little effort. (yes, sometimes skipped some reply's)
Also copied the half of the ftp servers to my pc :lol:
Some of the stuff of the extended roms there is useless for BlueAngels, also some things can work, or needs to be patched, but to find out what will work for me under wm2005 takes some time.
Sure normal applications work, but a working midlet manager, still no luck for me. :evil:
But renember that a Himalaya and the BlueAngel are totaly different devices, (also wm2003 and wm2005)common thing like a bootscreen will not work, as for now. caller-id is totaly obsolete, (don't know for Hima).
The fax of my original ext rom did gave errors, during install. :evil:
At the moment the wiki of the BlueAngel is totally outdated, since there is so many fixed.
Also from M. a ba_wm5_fix_v3.rar versie on the wiki still reverts to V1.
(Think i missed a reply to? i'm not reading a topic of 10+ pages every day again starting at page 1 due to Changes)
http://forum.xda-developers.com/download.php?id=6617
So has Anybody found a working midlet manager? Or something else i missed??
Re: BlueAngel Operator Standard Sofware For WM2005 Her
pimbo said:
At the moment the wiki of the BlueAngel is totally outdated, since there is so many fixed.
Click to expand...
Click to collapse
True
But wiki is only as good as we are, take this example.
http://forum.xda-developers.com/viewtopic.php?p=154311#154311
http://wiki.xda-developers.com/index.php?pagename=BA_WM5_MMS_Fix
Wiki has a button at the bottom that is called edit. We can all use it.
the mms cab file is saying it is notdigitally signed!!! can someone help!! i have the patched version of wm5
Re: BlueAngel Operator Standard Sofware For WM2005 Her
xrodney, You installed also ba_wm5_fix_v3.rar or a elder one?
http://forum.xda-developers.com/download.php?id=6617
_______________________________________________________________
MDAIIIUser said:
Wiki has a button at the bottom that is called edit. We can all use it.
Click to expand...
Click to collapse
Sorry man, still not able to get acces, whats the status of the problem, since you say'd somewere else that you posted it to the admin forum or something?
I Have the same problem. When I try to install the MMS cab, I get saying it's not signed with a trusted certificate. I followed the link and downloaded the Version 3 Patch Cab. It made no difference. Any other ideas?
I Have the same problem. When I try to install the MMS cab, I get saying it's not signed with a trusted certificate. I followed the link and downloaded the Version 3 Patch Cab. It made no difference. Any other ideas?
does anyone have the Modem application that used to be in the programs on 2003, the one you use to set the BA as a moden on a PC or laptop and connect when craddled that way, know what I mean ???
MotoBarSteward said:
I Have the same problem. When I try to install the MMS cab, I get saying it's not signed with a trusted certificate. I followed the link and downloaded the Version 3 Patch Cab. It made no difference. Any other ideas?
Click to expand...
Click to collapse
Same problem here. Can anyone help please?
Slave1 said:
MotoBarSteward said:
I Have the same problem. When I try to install the MMS cab, I get saying it's not signed with a trusted certificate. I followed the link and downloaded the Version 3 Patch Cab. It made no difference. Any other ideas?
Click to expand...
Click to collapse
Same problem here. Can anyone help please?
Click to expand...
Click to collapse
Try the version 2 of mms
updated the link of the 1st post. or
ftp://xdaupload:[email protected]/Blueangel/WM5_ArcsoftMMSv2_From_Universal.CAB
Also on the WIKI now.
http://wiki.xda-developers.com/index.php?pagename=BA_WM5_MMS_Fix
Chinese software works in wm5
http://www.mactiontech.com/download_1.htm#monster download monster chinese SIP
http://www.mactiontech.com/download_monster_chinese.htm download the magneto version of the monster chinese
pimbo said:
Slave1 said:
MotoBarSteward said:
I Have the same problem. When I try to install the MMS cab, I get saying it's not signed with a trusted certificate. I followed the link and downloaded the Version 3 Patch Cab. It made no difference. Any other ideas?
Click to expand...
Click to collapse
Same problem here. Can anyone help please?
Click to expand...
Click to collapse
Try the version 2 of mms
updated the link of the 1st post. or
ftp://xdaupload:[email protected]/Blueangel/WM5_ArcsoftMMSv2_From_Universal.CAB
Also on the WIKI now.
http://wiki.xda-developers.com/index.php?pagename=BA_WM5_MMS_Fix
Click to expand...
Click to collapse
That's the version I was using, I tried the one you linked to in case mine was corupt or something but still go the error message. Is there a way to stop WM 5.0 checking for a digital signature?
Slave1 said:
but still go the error message. Is there a way to stop WM 5.0 checking for a digital signature?
Click to expand...
Click to collapse
well i managed to got it working on a PH20B by installing the latest signed rom. (still the test one)
Now Version 3 is out: not on my system yet.
ftp://xda:[email protected]/Uploads/Blueangel/wm5_test/ba_wm5_patch3.rar
than i installed the patches according to this list.
starting with:
- ba_wm5_fix_v3.rar
- Buttons_Fix_v2.rar
- WM5_ArcsoftMMSv2_From_Universal.CAB (install this before the camera)
- Camera2K5_v1.rar
- Album with midi.rar
Maybe this works for u to? 8)
Helmi BA WM2k5 AKU3.0 Beta (v.1.2 Beta)
In this beta, Today Themes, BTA2DP, PIMG, Photo Contact, GPS, Animated Gif, Phone with CommManager (signal light turn off while in flight mode) FIXED!
Known issues:
1. There no internal integration beetween Comm Manager and Wifi, cos Different Driver beetween Wizard & BA (I've succesfully combine them in the past but forgot now how to do it again...lol).
2. When BT On, IR On, WIFI On, ActiveSync On, the tray might flick.
3. Some help file and Some Picture/images has been strip out from the ROM to create space for more usefull app.
Tips:
1. Disable Sound (Sound & Notification >> Events) might help system speed.
2. Disable Sound in phone (Phone Settings >> Keypad >> Off) might help phone speed.
3. Backup/Sync ur PIM with active sync first (Contact, email, etc) if u upgrade it from old rom (anything below AKU3.0 ROM) cos PIM management are different from the old rom ur old backup will not work, but ActiveSync will work ok.
Please read the readme file, I dont hv time to update Wiki page, but I'll love if someone do the wiki page for me. btw I think the information in Readme file is enough to flash ur rom and since no 'real' extended rom so no further preparation is needed, but u might consider to make ur old Extended_ROM size to 128kb to make more storage space for ur device.
Btw The EXTROM folder is included all operator curently supported for GPRS/MMS Setting, just delete the .CAB in ExtROM that u dont need.
Currently Supported Operator:
Most ASIA, O2 UK, US, Orange Israel:
1O1O
3-DUALBAND-
AIS
Celcom
ChungHwa Telecom
CTM
DiGi
DTAC
Globe
IM3
M1
Maxis
New World Mobility
One2Free
Optus
Orange Thailand
Peoples
ProXL
Satelindo
SingTel
Smart
SmarTone
StarHub
StarHub Prepaid
Sun Cellular
Sunday
Telkomsel
Telstra
Vodafone Australia
O2 UK
T-MOBILE UK-MMS
T-MOBILE USA Internet
ORANGE Israel
MIDDLE EAST:
Batelco
Etisalat
Eygept Vodaphone
Fastlink
Jawalnet
Maroc Telecom
Mobinil
MTC
Oman Mobile
QTel
Syriatel
Vodaphone
Wataniya
WIND
If ur operator not in the list just delete all file in OPERATOR folder except CAB-Customization-BlueAngel-O2ASIAWWE-19May05.reg.CAB and run it to make a default mms profile that u can change, see README (in .RAR) for more detail.
With the Global Contacts Access plugin from Microsoft U can use the central/global exchangeserver address book. (Thanks to xdaradar for the info)
look here:
https://www.microsoft.com/windowsmobile/downloads/global/default.mspx
and download the ROM here:
http://micmeo.com/BlueAngel/index.php?dir=AKU_3.0
or here:
ftp://xda:[email protected]/Uploads/Blue Angel/Helmi_WM2k5_AKU3.0_32mb_v1.2.zip
thanks MicMeo for the space and the help, thanks man, really appreciate it.
BIG Thanks to MAMAICH
and also Bepe, Lt.Cmdr.Ivan, MicMeo, Midget_1990, xplode, Black6spdZ, Xdaradar, thingonaspring, odie3, imatrix, spkr4thdd, Brazilian Joe, efjay, motisu... geez to much to mention, cos so many people involved with this rom...thanks guys...
EDIT: The original O2SMSPLUS.CAB in extrom packet hv problem, Unable to send/recieve sms use the modify version here if u planning to use it. remove the old one, reset device and install the attachment bellow.
or delete the vcard.lnk in \windows\startup will also fix this problem.
Assume Today Theme fix in this ROM too? [Nevermind - see that it is via the Readme]
Also what do you mean by "Tray Flick"?
odie3 said:
Assume Today Theme fix in this ROM too? [Nevermind - see that it is via the Readme]
Also what do you mean by "Tray Flick"?
Click to expand...
Click to collapse
yes it does, I've edit the post, I means the tray icon is blinkin/flick it also happens in My Aku2.3 right?,
In my device if i turn on Wifi, BT, IR, ActiveSync on the same time. the tray is blinkin a little.
btw, I hv 1 question, Is there any WModem that work on WM5? do you guys ever have a Wmodem that work with BA WM5? please let me know. and also any info about BT SIM ACCESS PROFILE (SAP) is more then welcome...
Another suggestion to make communication easier
So, in the quest to have things going smooth and to make our lives easier, I want to drop in another suggestion.
In Helmi 1.1 we had a few hotfixes in the form of cab files which added/fixed features on the rom
So, my suggestion is to adopt the standard usage of a few KEYWORDS, so that we can instantly identify the attachments in the forum thread
ADDON - cab adds a feature
HOTFIX - cab fixes (or attempts to fix) broken stuff
These identifications could come embedded on the cab name. Additionally, to avoid confusion on which CAB is the latest one, they should use VERSION NUMBERS too.
after the KEYWORD, then would come either the version number, starting at 1.0, or the keyword UNTESTED.
Examples:
10xSpeed_Increase.HOTFIX.UNTESTED.cab
10xSpeed_Increase.HOTFIX.1.0.cab
I believe this little detail could make testers' lifes easier...
Up, up and away!
Downgrade first?
I know this is probably in the wiki, but I didn't find it from a brief search.
I'm currently on Tuma 1.3. If I want to try this, do I need to downgrade to 2003SE first? If not, do I need to wipe the hive, etc?
Sorry for the basic question...
You can upgrade to Helmi's ROM without downgrading.
But yes, you will need to clear the registry.
SpeedTweak CABs?
@helmi:
The 'speedtweak' CABs are not inside the EXTROM. Can you put them on the FTP site or attach them on the first post of the thread? BTW, just flashed, going to test now.
And many many thanks!
are the contact entries shown using pocket informant with this new rom?
hey helmi_c,
great work man. and plz remember how to integrate beetween Comm Manager and Wifi.
I notice u removed Speedtweak cab from your v1.2. has the speedtweak been incorporated directly or we dont need that anymore.
good work man,
imatrix
raymonds said:
are the contact entries shown using pocket informant with this new rom?
Click to expand...
Click to collapse
It can be seen with Pocket Informant 2007 Beta.
http://download.pocketinformant.com/FTF/PI2007/
Thanks mi...!!!!!!!
:twisted:
Helmi AKU3.0 v1.2beta
hey helmi_c,
Nice and good great work man. Is sprit backup program work with this new Rom Helmi AKU3.0 v1.2 Beta and what about the speed and stability of the new Rom , also I can not used Pocket Informant program
PDA2K
Helmi AKU3.0 v1.1beta
:lol:
MicMeo said:
raymonds said:
are the contact entries shown using pocket informant with this new rom?
Click to expand...
Click to collapse
It can be seen with Pocket Informant 2007 Beta.
http://download.pocketinformant.com/FTF/PI2007/
Click to expand...
Click to collapse
wow you've just made this new rom a lot more attractive. thanks a lot, MicMeo!!!
i just flashed ... will soon give my comments.
great work, too, helmi!
hmm... when i'm in phone mode and press some numbers, the corresponding names aren't shown... where can i get the cab file?
Thank yoy
i will try it now
sms_alert_fix :?
when i started my ppc i got an error saying sms_alert_fix could not be found :s why is taht so?
hmm... when i'm in phone mode and press some numbers, the corresponding names aren't shown... where can i get the cab file?
Click to expand...
Click to collapse
Do u mean Smartdial?
Maybe this cab can help u to solve ur prob.
[/quote]
sevenslidegrills said:
hmm... when i'm in phone mode and press some numbers, the corresponding names aren't shown... where can i get the cab file?
Click to expand...
Click to collapse
Do u mean Smartdial?
Maybe this cab can help u to solve ur prob.
Click to expand...
Click to collapse
[/quote]
thanks sevenslidegrills, but when i run the cab file, it says
"Installation of WM5_SmartDial.Cab
was unsuccessful."
am i supposed to change anything before installing the cab file?
edit: i found another cab file with the same name (but larger size) that worked! should perform soft reset after installation.
Bluetooth and turn on ???
Are there some ideas about BT , when device is turning on by itself ,
And as i sad WM5 is turning on by itself without display you can observ it by playing mp3's and turning off your device...
MicMeo said:
raymonds said:
are the contact entries shown using pocket informant with this new rom?
Click to expand...
Click to collapse
It can be seen with Pocket Informant 2007 Beta.
http://download.pocketinformant.com/FTF/PI2007/
Click to expand...
Click to collapse
Does this beta need any registration info?
New Release... and must try !! This rom..
Rom Download :
http://micmeo.com/BlueAngel/AKU_3.0/BA_WM2005_Logout_5.0.06_AKU3.0.zip
Thanks Logout , Micmeo And All Developers!!
:twisted:
good job!
flash it now
Autorom is wrong?
I've just downloaded the ROM and tried to install it on my BA, but the autorun on the extended rom didn't do anything.
So, I've copied to the autorun.exe from Helmi's rom and it's loading the extended files now.
Up and Running now
After the little autorun problem was fixed, my BA is up & running.
At first look, I would say that it is a little bit faster then Helmi's 1.2 ROM.
The system quickly responds to taps on the screen (menu, buttons etc).
Wireless & Bluetooth are working (Bluetooth via the Comm.Manager and TrayIcon, Wireless only via the TrayIcon).
I had no problems installing some other software (iSilo, BeeLineGPS, AvantGo, SPB Weather, PocketLAN, mNotes) and they seems to be running fine.
Maybe Logout can share with us what is specific about this release and if there are any known problems.
It is 5.04.06 not 5.0.06.
You can see the version 5.04.06 in boot image(The green image of push technology) or in Device Information.
Please correct the name.
anyone know... why my mms always failed to send ....help!!!
some1 plz.. post shutupxp for wm5.0
@vivi can u send MMS on logout Rom ?
Thanks
:twisted:
Phreakazoidz said:
anyone know... why my mms always failed to send ....help!!!
@vivi can u send MMS on logout Rom ?
Thanks
:twisted:
Click to expand...
Click to collapse
It's a shame.I never use MMS.
Try configure MMS account but no success yet. :wink:
Phreakazoidz said:
New Release... and must try !! This rom..
Rom Download :
http://micmeo.com/BlueAngel/AKU_3.0/BA_WM2005_Logout_5.0.06_AKU3.0.zip
Thanks Logout , Micmeo And All Developers!!
:twisted:
Click to expand...
Click to collapse
Thanks, downloading right now.
ringing delay
if use mp3 as ringtone, it will be delay about 5-7seconds....but if use midi or wav then it take around 2 or 3 sencond......any solution for this??
thanx
Very fast rom !!!!
But :
If I turn on speakerphone the icon and notification stays on the screen even after the call is ended.
How can I remove this ??
Finnaly Logout ROM is out!!... been waitin for quite some times... congratulation logout.. :wink:
btw, I believe u strip the os part from my rom, cos some part ar not from bepe version, I recommend u remove some drivers that didn't not needed, this is my mistakes, and this is why I release the hotfix logout. that drivers is only usable with iDO device, for our device its only taken resource and no noticable function...
I'm happy with the rom release, so we can have an options, and maybe we can hv a good comparating in the way to find the ROM that we can use in the end, that my goal not popularity...lol...
once again... congratulation logout...
Phreakazoidz said:
anyone know... why my mms always failed to send ....help!!!
some1 plz.. post shutupxp for wm5.0
@vivi can u send MMS on logout Rom ?
Thanks
:twisted:
Click to expand...
Click to collapse
its seems this problem is ur main problem bro...what setting cab u use? if u use from wm2003 version, u just need to check the setting in Messaging >> MMS Configuration >>Servers>>Choosse ur operator >>and change the connect via dropdown list to ur operator MMS setting, reset maybe needed and then try to send again... btw also look at the preference tab there's a setting for Photo resolution.
@helmi....
i check mms configuration , i change port 3337 to 9201 ,send MMS again my MMS work perfectly !!!
SOLVED!!
Thanks helmi
:twisted:
anyone have a thoroughly tested speed analisys with everything turned on and synced a few times yet? How the speed compared to heli's latest?
Thanks Bebe, Helmi and all for new tesed Rom.
@Helmi: Yes, I replace some your file, module, registry were missing in original AKU3.0 Rom.
I thinks you should build your rom on new core (nk.nba with AKU3.0 Xip file) and some registry add in boot.hv better than default.hv. Boot.rgu on BA WM2005 is not necessary.
@ekapco: I try to add speaker phone in my rom, but It doesn't work, can't turn off it. Pls delete speaker phone in startup folder.
Now I'm very busy in my office, may be I can't edit bugs in my rom in longer time. I believe Helmi will release best rom WM2005 for BA.
logout said:
@ekapco: I try to add speaker phone in my rom, but It doesn't work, can't turn off it. Pls delete speaker phone in startup folder.
Now I'm very busy in my office, may be I can't edit bugs in my rom in longer time. I believe Helmi will release best rom WM2005 for BA.
Click to expand...
Click to collapse
@ Logout : It turns off okay, but just the Icon remains !
Small bug -> Yesterday missed some calls. Red light was flashing. I read the notifications, but red light won't turn off, until soft reset !
Another small bug -> Softkeys are not working like they should.
For example in commanager there should be an exit/done key ??
Wifi and Bluetooth work fine. Speed is very good
SIM Access Profile
Hello,
doeas anyone know if Bluetooth SIM Access Profile works with Logout's ROM?
I've read SAP work only with Bluetooth 2.0... doeas anyone know wich bluetoothversion the WM5-ROM's use?
What I found
Hoi Logout
The fastest rom I've ever tried.
I flashed it yesterday and found following issiues:
- Speed-Dial-Button in Phone missing
- The Networkcard-list is corrupt - blank lines between and configuration of them will mess up.
Also activesync-error 85002003, when trying passthrough Laptop to Internet and exchangeserver. This happens often like in Helmi's rom after wifi was used. Perhaps it's a timeout-prob or Issiues with the Comm-Mgr. Error never happens, when BA has been softresetted.
Thank you all for your great efforts to get WM5 working on BAs.
Chris from Zurich
Hopping rain will stop when streetparade is going on
Qtek9090
Helmi_c AKU 3.0 1.1b
there is a way to install Speed Dial?
I love this function
Can't we have a ROM overview like we usually do?
Helmi BA WM2k5 AKU3.2 Beta (v.1.3 Beta)
In this beta, hv all the feature from v1.2 plus new OS built (AKU3.2 OS part taken from Lt.Cmdr.Ivan AKU3.2 for UNI with help by indra9110) and speed improvement and also new ROM base (5.04.06 taken from logout template since its newer version display).
Known issues:
1. There no internal integration beetween Comm Manager and Wifi, cos Different Driver beetween Wizard & BA (I've succesfully combine them in the past but forgot now how to do it again...and i still cant remember it...hell!!!..lol). I think I'll love someone who help on this.
2. When BT On, IR On, WIFI On, ActiveSync On, the tray might flick.
3. Some help file and Some Picture/images has been strip out from the ROM to create space for more usefull app.
Tips:
1. Disable Sound (Sound & Notification >> Events) might help system speed.
2. Disable Sound in phone (Phone Settings >> Keypad >> Off) might help phone speed.
3. Backup/Sync ur PIM with active sync first (Contact, email, etc) if u upgrade it from old rom (anything below AKU3.0 ROM) cos PIM management are different from the old rom ur old backup will not work, but ActiveSync will work Ok.
Please read the readme file, I dont hv time to update Wiki page, but I'll love if someone do the wiki page for me. btw I think the information in Readme file is enough to flash ur rom and since no 'real' extended rom so no further preparation is needed, but u might consider to make ur old Extended_ROM size to 128kb to make more storage space for ur device.
WIKI page is provided by Fraser (thanks man! it really help alot) here the wiki page:
http://wiki.xda-developers.com/index.php?pagename=Helmi
Btw The EXTROM folder is included all operator curently supported for GPRS/MMS Setting, remember to delete the .CAB in ExtROM that u dont need.
Currently Supported Operator:
Most ASIA, O2 UK, US, Orange Israel:
1O1O
3-DUALBAND-
AIS
Celcom
ChungHwa Telecom
CTM
DiGi
DTAC
Globe
IM3
M1
Maxis
New World Mobility
One2Free
Optus
Orange Thailand
Peoples
ProXL
Satelindo
SingTel
Smart
SmarTone
StarHub
StarHub Prepaid
Sun Cellular
Sunday
Telkomsel
Telstra
Vodafone Australia
O2 UK
T-MOBILE UK-MMS
T-MOBILE USA Internet
ORANGE Israel
MIDDLE EAST:
Batelco
Etisalat
Eygept Vodaphone
Fastlink
Jawalnet
Maroc Telecom
Mobinil
MTC
Oman Mobile
QTel
Syriatel
Vodaphone
Wataniya
WIND
If ur operator not in the list just delete all file in OPERATOR folder, cos the MMS_ENABLE.CAB already build a standar MMS account that u cant change.
With the Global Contacts Access plugin from Microsoft U can use the central/global exchangeserver address book. (Thanks to xdaradar for the info)
look here:
https://www.microsoft.com/windowsmobile/downloads/global/default.mspx
and download the ROM here:
Micmeo is back!
http://micmeo.com/BlueAngel/index.php?dir=AKU_3.2
or
ftp://xda:[email protected]/Uploads/Blue Angel/AKU3.2/Helmi_WM2k5_AKU3.2_32mb_v1.3.rar
thanks Indra9110 and micmeo for the space and the help, thanks man, really appreciate it.
BIG Thanks to MAMAICH
and also Bepe, Lt.Cmdr.Ivan, indra9110, MicMeo, Logout, Midget_1990, xplode, Black6spdZ, Xdaradar, thingonaspring, odie3, imatrix, spkr4thdd, Brazilian Joe, efjay, motisu... geez to much to mention, cos so many people involved with this rom...thanks guys...
NOTE:
Rommaker, U welcomde to take apart this rom and use or built with ur own custom rom, cos u might thing this rom as a base/test built for AKU port (My way/Hardcode ways). or I'll post the AKU3.2 OS dir if someone needed it (bepe's way, isn't he brilliant??).
But please, gave credits to all hard worker guys here who fix the huge bug list If u use it and before u put ur name on it...specially if u're who want/usually completely copy paste the contain of the rom... btw post input or bugfix for os/rom bug is even more welcome, lets make it better guys...
best regard
helmi
EDIT: The previous post is an uncompleted/wrong ROM please delete it (I've rename the old file) and re-download the rom here:
ftp://xda:[email protected]/Uploads/Blue Angel/AKU3.2/Helmi_WM2k5_AKU3.2_32mb_v1.3.rar
really sorry for this.
hey Helmi_c,
damn u r fast, i am gonna grab it now
and will do some testing tomorrow.
thanks man.
btw, u posted the wrong link
this is correct one
ftp://xda:[email protected]/Uploads/Blue Angel/Helmi_WM2k5_AKU3.2_32mb_v1.3.rar
imatrix
download link!
Helmi,
First of all, congratulation on your new ROM. I have been looking forward to using this ROM for long time.
Will have feedback soon!
Great work on this Helmi, you are producing some smashing ROMs and showing us that the BA is more than capable of WM5.
Good God you are fast!!!
I am downloading right now. I will post feedback on it as soon as I flash it.
Thanks Man!!!
Issues:
(1)No SimToolKit?
(2)THe "Display Switch" inside Programs is not functioning - After pressing the button the screen will turn OFF (=press power button) - Anyone is it switch lands-->Prop?
oh, this is real fast
i just dl logout 5.04.06 wwe aku3.0, and just finish installed everything down.
i grap this one anyway, Thz a lot.....
hope this one is more stable than last one :lol:
Thanks Helmi
Downloading now :lol:
Just flash this new ROM.
Encounter "no service" on phone function, tried radio 1.13 & 1.15 , same issue.
Anyone have the same problem ?
Phone not working, keeps saying "Operation Failed" after PIN.
it seems a very fast and complete rom.
i got "Operation Failed" as well
sometimes i have to wait for a very very long boot....
one more thing, i used logout .06 WWE, the lastest rom
there is no noise with Jabra 250 bluetooth headset
this is the FIRST rom thats no problem w/ my 250
can u plz do anything about that? its gonna b great and thnkfull for that..
Phone's working here with new ROM. Getting great signal using Cingular.
Now, after a reset, I'm getting the operation failed. Played around some and it seems that if I reset out of the cradle, I get operation failed. If I reset in the cradle it connects up to the network fine.
First of all, thanks for the graet work helmi_c.
I had the same problem with operation failed, then the phone wasn't in cradle, but after a reset in the cradle the phone works fine.
cfg.txt
In CFG.TXT in EXTROM ----
Where is the CAB: \Storage Card\ExtROM\Recorder_WWE.cab
i cant foung it in EXTROM folder (file Helmi_WM2k5_AKU3.2_32mb_v1.3.rar)
Also having problems with included profile aplication -> its icon on today screen do nothing (after u set show Item)
same probles with phone - but i just reset it in another place where is a stronger signal and works fine
yep, my device keeps telling NO SERVICE
please fix that
imatrix
imatrix said:
yep, my device keeps telling NO SERVICE
please fix that
imatrix
Click to expand...
Click to collapse
Same here. Seems like this ROM isn't stable yet.
csl1010 said:
Issues:
....
(2)THe "Display Switch" inside Programs is not functioning - After pressing the button the screen will turn OFF (=press power button) - Anyone is it switch lands-->Prop?
Click to expand...
Click to collapse
It's working good. It turns off the display, but device stays on. When U press power button, the whole device goes suspended state.
U're talking about screen rotare function, which is probably not included ATM
No service
Also, I've experienced some problems with phone support.
@ first turn on, after standard format + cleaning registry hive, There appeared a bubble, saying "Operation Failed" and there was no service.
After doing "hard reset" (I mean like old 2k3, pwr+rst, which resets date, unlike just rst= soft reset) Problem is gone, and service is on.
Wow - Thanks Helmi. Best yet!
Had same problem once only - sr, and its working.
How can we replace 'Wireless Manager' with 'Comm Manager' on the Today Screen. Is it a reg setting?
i had this problem in some of my roms (internal) dont know why it happens, i usually just rebuilt the rom and there was no problem.
Helmi BA WM2k5 AKU3.2 Beta (v.1.3.1 Beta)
In this minor update currently progress is:
- Wifi & Bluetooth Coexistentcy.
- Ability to save everywhere with Pocket Excel
- Smart Dial v2.2 is added to ROM. (if u dont use it just disable it)
- Flight Mode, Task Manager, WM5 New Menu, WM5 Storage, & USB Mode Switch added to extras folder.
- StartUp Manager by Baniazek
- Use ace_ddi as video driver (Landscape & Portrait fully supported but gif file wont show in PIE, use D3D_Driver driver to support gif with PIE but Landscape mode will need to re-align after soft reset)
- .NET Fix included
- Transcriber included.
In this beta, hv all the feature from v1.2 plus new OS built (AKU3.2 OS part taken from Lt.Cmdr.Ivan AKU3.2 for UNI with help by indra9110) and speed improvement and also new ROM base (5.04.06 taken from logout template since its newer version display).
Known issues:
1. There no internal integration beetween Comm Manager and Wifi, cos Different Driver beetween Wizard & BA (I've succesfully combine them in the past but forgot now how to do it again...and i still cant remember it...hell!!!..lol). I think I'll love someone who help on this.
2. When BT On, IR On, WIFI On, ActiveSync On, the tray might flick.
3. Some help file and Some Picture/images has been strip out from the ROM to create space for more usefull app.
Tips:
1. Disable Sound (Sound & Notification >> Events) might help system speed.
2. Disable Sound in phone (Phone Settings >> Keypad >> Off) might help phone speed.
3. Backup/Sync ur PIM with active sync first (Contact, email, etc) if u upgrade it from old rom (anything below AKU3.0 ROM) cos PIM management are different from the old rom ur old backup will not work, but ActiveSync will work Ok.
Please read the readme file, I dont hv time to update Wiki page, but I'll love if someone do the wiki page for me. btw I think the information in Readme file is enough to flash ur rom and since no 'real' extended rom so no further preparation is needed, but u might consider to make ur old Extended_ROM size to 128kb to make more storage space for ur device.
WIKI page is provided by Fraser (thanks man! it really help alot) here the wiki page:
http://wiki.xda-developers.com/index.php?pagename=Helmi
Btw The EXTROM folder is included all operator curently supported for GPRS/MMS Setting, remember to delete the .CAB in ExtROM that u dont need.
Currently Supported Operator:
Most ASIA, O2 UK, US, Orange Israel:
1O1O
3-DUALBAND-
AIS
Celcom
ChungHwa Telecom
CTM
DiGi
DTAC
Globe
IM3
M1
Maxis
New World Mobility
One2Free
Optus
Orange Thailand
Peoples
ProXL
Satelindo
SingTel
Smart
SmarTone
StarHub
StarHub Prepaid
Sun Cellular
Sunday
Telkomsel
Telstra
Vodafone Australia
O2 UK
T-MOBILE UK-MMS
T-MOBILE USA Internet
ORANGE Israel
ORANGE UK
MIDDLE EAST:
Batelco
Etisalat
Eygept Vodaphone
Fastlink
Jawalnet (Some Modification is needed)
Maroc Telecom
Mobinil
MTC
Oman Mobile
QTel
Syriatel
Vodaphone
Wataniya
WIND
Note on MMS configuration, since it was from the wm2003 u should set the MMS. to go into MMS config and select ur operator MMS on the Connect Via selection. Messaging >> MMS Configuration >> Server >> Connect Via >> your operator MMS account
If ur operator not in the list just delete all file in OPERATOR folder, cos the MMS_ENABLE.CAB already build a standar changeable MMS account.
With the Global Contacts Access plugin from Microsoft U can use the central/global exchangeserver address book. (Thanks to xdaradar for the info)
look here:
https://www.microsoft.com/windowsmobile/downloads/global/default.mspx
and download the ROM here:
http://micmeo.com/BlueAngel/index.php?dir=AKU_3.2
or here:
ftp://xda:[email protected]/Uploads/Blue Angel/Helmi_WM2k5_AKU3.2_32mb_v1.3.1.rar
thanks Indra9110 and micmeo for the space and the help, thanks man, really appreciate it.
BIG Thanks to MAMAICH
and also Bepe, Lt.Cmdr.Ivan, indra9110, MicMeo, Fraser, Logout, Midget_1990, xplode, Black6spdZ, Xdaradar, thingonaspring, odie3, imatrix, spkr4thdd, Brazilian Joe, efjay, motisu... geez to much to mention, cos so many people involved with this rom...thanks guys...
NOTE:
Rommaker, U welcomde to take apart this rom and use or built with ur own custom rom, cos u might thing this rom as a base/test built for AKU port (My way/Hardcode ways). or I'll post the AKU3.2 OS dir if someone needed it (bepe's way, isn't he brilliant??).
But please, gave credits to all hard worker guys here who fix the huge bug list If u use it and before u put ur name on it...specially if u're who want/usually completely copy paste the contain of the rom... btw post input or bugfix for os/rom bug is even more welcome, lets make it better guys...
best regard
helmi
Thank You
Dear Helmi, I want to thank you and all other people who works for a better ROM for us, the BA users. You are great!
Thank you very much for your hard job and your big passion...
I'll try it as soon as possible
:wink:
Tweaks2k2 problems ...again
Hi Helmi_c,
Thanks again for a new, wonderful ROM. It mostly seems to be running smoothly.
1 problem that has returned. under 3.2 1.3, after I installed the .NET fix, tweaks2k2 was able to register. With the new 1.3.1, it bombs out when I go into the register page. I tried to install the .NET patch but it didn't help.
Any ideas?
Have just downloaded the new ROM, gonna flash soon. Will have feedbacks as soon as possible.
Re: Tweaks2k2 problems ...again
motisu said:
Hi Helmi_c,
Thanks again for a new, wonderful ROM. It mostly seems to be running smoothly.
1 problem that has returned. under 3.2 1.3, after I installed the .NET fix, tweaks2k2 was able to register. With the new 1.3.1, it bombs out when I go into the register page. I tried to install the .NET patch but it didn't help.
Any ideas?
Click to expand...
Click to collapse
usually that got something to do with ati driver, u should use d3d_ddi driver moti. I've make Ace_ddi default video driver since it fully support Landscape & Portrait nicely and its faster, but some .NET might not function very well, especially Tweak2k app. currently I dont hv driver with the two driver functionality... arrgh...
many thank
thanks alot krub=pom for your work hard
i cannot use a2dp and avrcp with my bluetooth stereo headset
stk doesnt work still
Re: Tweaks2k2 problems ...again
helmi_c said:
motisu said:
Hi Helmi_c,
Thanks again for a new, wonderful ROM. It mostly seems to be running smoothly.
1 problem that has returned. under 3.2 1.3, after I installed the .NET fix, tweaks2k2 was able to register. With the new 1.3.1, it bombs out when I go into the register page. I tried to install the .NET patch but it didn't help.
Any ideas?
Click to expand...
Click to collapse
usually that got something to do with ati driver, u should use d3d_ddi driver moti. I've make Ace_ddi default video driver since it fully support Landscape & Portrait nicely and its faster, but some .NET might not function very well, especially Tweak2k app. currently I dont hv driver with the two driver functionality... arrgh...
Click to expand...
Click to collapse
Helmi_c
as usual you are a wonder!!! I installed the ddi driver, registered tweaks2k2 and the reinstalled ace driver. Other than this small proplem, everything seems to be working well.
Re-installing programs
Hello.
Which backup programme would ppl recommend to reinstall all settings and programs from the previous roms ?
At the moment i'm using Helmi BA WM2k5 AKU3.2 Beta v.1.3.0, but itching to upgrade, yet not looking forward to re-installing 30 programs.
Many Thanks Helmi You're the man.
Changing vide drivers
Hello Motisu,
How did you install the ddi driver then reinstal ace? And where do you download from?
I have 3 programs that display this error incl 'pocket workout wizard' grrr.
Many thanks.
Re: many thank
mpx2003 said:
i cannot use a2dp and avrcp with my bluetooth stereo headset
Click to expand...
Click to collapse
AVRCP works fine with my Motorola HT820. Nice work Helmi_c.
Re: Changing vide drivers
AbuGWM5 said:
Hello Motisu,
How did you install the ddi driver then reinstal ace? And where do you download from?
I have 3 programs that display this error incl 'pocket workout wizard' grrr.
Many thanks.
Click to expand...
Click to collapse
both of them are in the extrom subdirectory.
Re: Changing vide drivers
motisu said:
AbuGWM5 said:
Hello Motisu,
How did you install the ddi driver then reinstal ace? And where do you download from?
I have 3 programs that display this error incl 'pocket workout wizard' grrr.
Many thanks.
Click to expand...
Click to collapse
both of them are in the extrom subdirectory.
Click to expand...
Click to collapse
I still can't find them
Sorry Moti.
So, is Microsoft Voice Command still not working in the newer betas?
I hope it's working, since its the only issue keeping me away.
In Vesion 1.3, I could used Bluetooth but this vesion 1.3.1 don't use bluetooth. Don't open and manager bluetooth = Don't use Bluetooth (before/after soft reset) Help me!
Re:
viit said:
In Vesion 1.3, I could used Bluetooth but this vesion 1.3.1 don't use bluetooth. Don't open and manager bluetooth = Don't use Bluetooth (before/after soft reset) Help me!
Click to expand...
Click to collapse
No Bluetooth!
nice rom! have several questions, though...
1. do you recommend an overclocking application for this rom?
2. similar to the 1.3 version, while the BA is docked and charging, and an alarm/reminder or missed call comes, the charging is suspended until i touch the screen. the problem is that the battery drains out even if it is docked. any suggestions to remedy this?
3. the left portion of the display for call history does not show up (transparent)
4. i see some additional system settings, what do these do?
--- clear storage (nothing comes up when it is clicked)
--- startup
5. thanks for bringing back flight mode in the programs>extras. what are the following apps for?
--- wm5 storage
--- task manager
6. can the backup i made through spb backup be used to restore pim data?
Re: Changing vide drivers
AbuGWM5 said:
motisu said:
AbuGWM5 said:
Hello Motisu,
How did you install the ddi driver then reinstal ace? And where do you download from?
I have 3 programs that display this error incl 'pocket workout wizard' grrr.
Many thanks.
Click to expand...
Click to collapse
both of them are in the extrom subdirectory.
Click to expand...
Click to collapse
I still can't find them
Sorry Moti.
Click to expand...
Click to collapse
The CAB was in AddON dir.
odie3 said:
So, is Microsoft Voice Command still not working in the newer betas?
I hope it's working, since its the only issue keeping me away.
Click to expand...
Click to collapse
hallo there oddie, hmm... I think M$ VC will never work with AKU3.xx cos there's a difference with phone,PIM management method.
I've been thinkin to built a AKU2.3 since AKU3.0/3.2 hv some compabilty issue with some app, since most of the developer didn't realize/aware there's a AKU3 exist :lol: ...,
maybe I'll built a better AKU2.3 ROM if I hv time, since it support most of the app...hmm...
What do you guys think?
AKU3.xx newer rom but hv problem with some app
or
AKU2.3 older rom built but it seems to hv much compability with most of the software & PIM app.?
Newer is better.