Database Develop

Kaiser not accessing net through my pc

AFAIK the kaiser should use my home net connection when synched with my PC right?
I remember when I was setting up / installing that I ticked some kind of box to not use hosts net conn when attached via USB (God knows why I did, I knew it was a bad idea after i hit OK...) but I don't remember where I set it.
I have looked around and can't seem to find any setting like that - any ideas?

if i'm not mistaken, that's a setting you need to change when you DON'T have your device connected to your pc.
eric b

evilc said:
AFAIK the kaiser should use my home net connection when synched with my PC right?
I remember when I was setting up / installing that I ticked some kind of box to not use hosts net conn when attached via USB (God knows why I did, I knew it was a bad idea after i hit OK...) but I don't remember where I set it.
I have looked around and can't seem to find any setting like that - any ideas?
Click to expand...
Click to collapse
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000

Hmm, that reg entry didn't seem to do it. I still can't access the net on my mobile through my pc.

its a setting in activesync/Mobile Device center, you will know it when you see it

In activesync go to file-->connection settings...--> and uncheck the allow wireless connection on device when connected to the desktop and your phone should stop using gprs instead of activesync to connect to the net when your connected.

hmm I still can't get a Internet connection through my computer! Does someone else still have the same problem?
Geko

Same problem here. I have the latests ActiveSync....I have "The Internet" selected as what my PC connect to in ActiveSync. I have un-checked "Allow Wireless Connection" - and still nothing. The phone won't sync with my Exchange server when connected to my PC....very annoying because the phone lags behind my 'real' schedule as a result!
Anyone?

GekoCH said:
hmm I still can't get a Internet connection through my computer! Does someone else still have the same problem?
Geko
Click to expand...
Click to collapse
Go check your router and/or firewall settings....
Your Kaiser should have it's own IP adres cause syncing is a network-based affair these days, so this might cause the problem in your network setup...

Check Settings/USB to PC ; change the Enable advanced network functionality, and try again. Happend to me in Vista, and after messing with this setting Windows Update downloaded latest driver for HTC and fixed the problem. (As i remember you can change it back afterwards, if it solves your problem).

thanks for all the help so far guys.
It definately seems to be an issue with activesync (ie the desktop PC) because when I connect to my PC here at work, it is all fine.

darkilici said:
Check Settings/USB to PC ; change the Enable advanced network functionality, and try again. Happend to me in Vista, and after messing with this setting Windows Update downloaded latest driver for HTC and fixed the problem. (As i remember you can change it back afterwards, if it solves your problem).
Click to expand...
Click to collapse
Thanks darkilici...!! I un-checked "advanced network functionality" under Seettings, Connections, USB-to-PC, and when I plugged my TyTn II back into my PC - it "found" the device again, re-loaded the driver, and now I am accessing the Internet on my TyTn II through my PC! Thanks......HUGE!
Much appreciated.

Unchecking it caused my phone to be able to use wireless while synched - thanks!
But if I tick it again, it goes back to how it was.
The error I am getting is:
"The page you are looking for cannot be found due to error 0x80072f78"
Even with it unticked, it's not really what I want. I want it to use my much faster broadband connection while tethered...
I think I may do a hard reset.

I forgot to ask, by any chance are you on T-Mobile (or any network that requires a proxy to access the net over GPRS)? If you are, then you have to disable the proxy server to be able to access the net over activesync.

Yes, I am on T-Mobile with Web n Walk.
Do you mean the one in "Connections"?
I removed that proxy tickbox and it seems to work now. Do I not need the proxy? What is it for? Cacheing? Or is it only to enforce the "No adult content sites" block? (Which I have removed so I can access facebook)
Thanks ever so much!

I'm on t-mobile in the US and I have to have the proxy to access the net over GPRS or it won't work at all. I'm not sure about if you need the proxy in the UK or not, but the easiest way to find out is to try to access the net over GPRS without the proxy and see if it works or not. If it doesn't the it would probably be easier for you to set up a second connection, the first with the proxy the way you already have it set up and then a second that has the same settings as the first only without the proxy settings. Then, just switch between the 2 when needed. Unfortunately that's the simplest way to do it that I have found.

Hmm, I'm actually looking for something like this, but not. Anyone know of a way to make it use AT&T's internet while connected to a computer with ActiveSync? That registry tweak works great for when I'm at home, but when I'm at work or something, I may want to use my phone's internet (GPRS/EDGE/3G/HSDPA). I have a program that lets me control my kaiser from a computer (MyMobiler), but it needs activesync. If I have Activesync, I have to use my work internet (which I don't want to do). Hopefully that makes sense.. Any ideas?

internet sharing tool and enable/disable cabs

yea, that should do the trick since it's been the same when i had a hermes

How do I use my Tilt as a wireless modem?

I have used my 8525 as a wireless modem but I can't seem to get the Tilt to connect. Did HTC come out with new modem drivers or did the dial up connection settings change when we switched back to ATT? I'm using a Win XP laptop and trying to connect over USB. Can someone give me a step by step process?
Thanks

yeah i'm lookn to see how to enable dun

Search around more for "Internet Sharing" for more information, there have been a few posts about it.
To use your cellular data connection for PC internet most people seem to use the included (but semi hidden Internet Sharing application).
It's located in the windows folder called "Internet Sharing". If you run it it's pretty clear how to get it up and running. The stock version works for USB or Bluetooth PAN connections to a PC. If you follow the instructions in the thread here you can supposedly set it up to use it as an adhoc Wifi access point. Haven't tried it myself so can't vouch for that one.
Basically you run the program, select your PC connection type, select Media Net and boom you're connected.

I am having the same problem connecting via a USB cord. Unfortunately I do not have an installation CD to update the modem drivers either. The drivers Windows is using may be from my 8525(which I got to work as a modem). I tried using Internet sharing from the windows folder but it does not help. The furthest I have gotten is a yellow light in the first box.
If anyone happens to have a link to the modem driver, please post it so I can keep hacking away. I'll post a solution if I can ever figure this out.

Tilt as a wireless modem
The easy way is to open File Explorer, go to the Windows directory and look for a file called "Internet Shar....". Press and hold on it and select Copy. The go to Windows>Start Menu>Programs and Paste it in here. Now it will be a selectable program in your Programs menu. Start the program while connected via USB to your laptop and hit "Connect" on the lower left side of the screen. Worked like a charm for me.

ciaeyes said:
The easy way is to open File Explorer, go to the Windows directory and look for a file called "Internet Shar....". Press and hold on it and select Copy. The go to Windows>Start Menu>Programs and Paste it in here. Now it will be a selectable program in your Programs menu. Start the program while connected via USB to your laptop and hit "Connect" on the lower left side of the screen. Worked like a charm for me.
Click to expand...
Click to collapse
I have this working for me as well. It's so much easier then setting up the phone as a modem. No drivers needed. Just plug and play.

Add bluetooth DUN to ICS
THis will add bluetooth DUN to ICS, basically you can tether over bluetooth with ICS as a modem or whatever..You need to install the .cab file posted here and thats basically it..Works perfect
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=2121&more=1&c=1&tb=1&pb=1
direct link to cab file - --- http://www.winmobiletech.com/sekalaiset/WM6_BT_DUN.cab
Ohh and the post about wifi tethering , IT Does work. It allows you to make your kaiser into a wireless router! =)

Thanks guys, I've been searching other forums and the internet share is the answer and soooo easy

Internet Sharing over Wifi, New all in one program!
http://forum.xda-developers.com/showthread.php?t=341803

Can't tehter USB with Internet Sharing
Hi guys: I have an AT&T rom without the bloatware. I have also Blackberry Connect unlimited plan as my email solution. I haven't been able to tether via usb with my laptop using Internet Sharing. I get the message: check usb cable and then neither of the 3 data connections (Medianet, AT&T GSPR and Blackberry) can connect. I get the message: the other party disconnected the connection. I would appreciate any help I can get. I really need to tether through my laptop. Thanks!

htc modem
i have my phone hooked up as a modem and everytime i disconnect, some of my programs dont work. then my text messages dont go through and i have to reset my phone then they come through on my sim card. can someone tell me what is going on?

I'm sure you need to start a whole new thread for this.

On the Internet sharing do you choose - ATT ISP GPRS or MediaNet ?

I used MediaNet and it worked, but you have to turn off USB connections in ActiveSync. It will interfere.

Comm Manager Internet Sharing instead of Wireless Modem?

I have an AT&T Tilt running its original ROM. Is there a way to change the Comm Manager to have a shortcut to Internet Sharing instead of Wireless Modem? I replaced the Comm Manager with a nice touch style one, but it still shows Wireless Modem, so I assume there is somewhere in the registry which tells Windows which one to use by default for this type of task. Does anyone know how to change it?

Bump...It's been awhile since this question was asked and I'm looking for the same thing. Anyone have any ideas yet?

Has anyone found a way?

where is Internet Sharing?
I'd like to give ICS a try instead of using wireless modem.
I have the original ROM. Where should I find Internet Connection Sharing?
I've looked in Start > Programs, and it's not there. If it is not on my phone, can I add it?
Thanks, Bren

xdafile said:
I'd like to give ICS a try instead of using wireless modem.
I have the original ROM. Where should I find Internet Connection Sharing?
I've looked in Start > Programs, and it's not there. If it is not on my phone, can I add it?
Thanks, Bren
Click to expand...
Click to collapse
If its not there, its hidden in your My Device/Windows directory. Its there, you just gotta look. On mine its called Internet Sharing. You can then create a shortcut to it and place it in your programs or start menu.
-Jay

download both AdvancedConfig_v1.1.CAB and AdvancedConfig_v1.0.CAB from http://xda.scan4.us/index.php?sort=date&order=desc&path=Cabs/ and change it from there

Internet Connection Sharing
Thanks for your responses to my post. I did find the app in my Windows folder. It's called IntShrUI.exe. I pasted a shortcut of it into my Start Menu > Programs folder. I haven't been able to figure out how to configure my PC to make it work.
I've been researching in the forums how to configure a PC to use the internet connection of my phone. My PC doesn't have Bluetooth, so I would like to use the USB connection. Most of the postings are how to configure for Bluetooth.
If you know where to find a good explanation, please post the link for me. I'm running Windows XP Pro. I want to use the phone as a back up connection if my cable connection goes down.
I have been successful using my phone with AT&T connection manager on my computer, but I have a problem with that. I have Virtual PC installed on my computer, and the network configuration of Virtual PC doesn't recognize the AT&T Connection Manager as a network card, so my VPC doesn't have access to the internet through my phone.
I'm hoping that with Internet Connection Sharing, the network adapter on my PC will still be used, and access the Internet through the gateway on my phone.
Thanks, Bren

xdafile said:
Thanks for your responses to my post. I did find the app in my Windows folder. It's called IntShrUI.exe. I pasted a shortcut of it into my Start Menu > Programs folder. I haven't been able to figure out how to configure my PC to make it work.
I've been researching in the forums how to configure a PC to use the internet connection of my phone. My PC doesn't have Bluetooth, so I would like to use the USB connection. Most of the postings are how to configure for Bluetooth.
If you know where to find a good explanation, please post the link for me. I'm running Windows XP Pro. I want to use the phone as a back up connection if my cable connection goes down.
I have been successful using my phone with AT&T connection manager on my computer, but I have a problem with that. I have Virtual PC installed on my computer, and the network configuration of Virtual PC doesn't recognize the AT&T Connection Manager as a network card, so my VPC doesn't have access to the internet through my phone.
I'm hoping that with Internet Connection Sharing, the network adapter on my PC will still be used, and access the Internet through the gateway on my phone.
Thanks, Bren
Click to expand...
Click to collapse
There are 2 ways to get it working over USB. Either get the USB modem drivers working, (Which I have never been able to do) or use windows dial up networking. I have connected my Tilt to the AT&T 3G data network with the Windows xp Professional DUN interface. When I get home I'll copy my DUN settings and post them here. Its the same settings I used to use to teather my Motorola V551 for data. I accidentally clicked on DUN a few weeks ago while the Tilt was connected and it worked with the same settings.
Of course, I do have a USB Bluetooth dongle, and getting ICS working is easiest with BT. All you have to do for that is set up a pairing between the 2 devices, and create a BT Personal Area Network.
-Jay

I got it working
Thanks, Jay.
I pieced together information I found about ICS, and I got it working. It works with my Virtual PC because Windows XP puts a Network Connection in the Network Connections folder that I can use to create a Virtual Network in the VPC configurations.
When my phone is connected to my computer via USB, and I open Internet Connection Sharing app on the phone, and then connect to the phone's data network, the Network Connection is automatically created in XP.
I'm not sure what was missing, but when I tried this earlier on my laptop, it didn't successfully automatically install the Generic RDNIS driver that my desktop did successfully install. I'm going to try it again on my laptop. On my laptop, I do have bluetooth, and I will try to get that working instead of USB.
I'm wondering, is there any advantage to using AT&Ts Communication Manager instead of Internet Connection Sharing?
Thanks again for your response.

xdafile said:
Thanks, Jay.
I pieced together information I found about ICS, and I got it working. It works with my Virtual PC because Windows XP puts a Network Connection in the Network Connections folder that I can use to create a Virtual Network in the VPC configurations.
When my phone is connected to my computer via USB, and I open Internet Connection Sharing app on the phone, and then connect to the phone's data network, the Network Connection is automatically created in XP.
I'm not sure what was missing, but when I tried this earlier on my laptop, it didn't successfully automatically install the Generic RDNIS driver that my desktop did successfully install. I'm going to try it again on my laptop. On my laptop, I do have bluetooth, and I will try to get that working instead of USB.
I'm wondering, is there any advantage to using AT&Ts Communication Manager instead of Internet Connection Sharing?
Thanks again for your response.
Click to expand...
Click to collapse
I would think that the advantage is that they then know for a fact you are teathering, and can be exxxxtra sure you are being "properly billed" on an "appropriate" data plan that probably costs at least $60/mo
-Jay

Ok, I found the Cingular / AT&T DUN settings on my computer.
Username: [email protected]
Password: CINGULAR1 (This is case sensitive!!!)
Number to Dial: *99***3#
I also always max out the port speed in the modem configuration so the port doesn't restrict a nice fast HSDPA connection.
This will work for Bluetooth or USB modem connections.
-Jay

HTC USB Modem Driver for XP or 2000

I have been working on setting up Internet Sharing on my laptop(s) for a few days now and have searched and read through the forums to no avail. I need the USB Modem Driver for Win2K and XP (SP2 if it matters). I put the set up CD in and searched it, but it list drivers only for Vista (32 and 64 bit).
Does anyone know a solution for this or know how to get hold of these drivers?
Thanks for your help.
Bobby

Can you not use Internet Connection Sharing?

If I knew how....
I could most likely use ICS if I knew how. When I plug the phone into the laptop it displays the found new hardware wizard, but no compatible driver for it to use. I have done a search on google, here on the forums and the MS website and am not able to locate the HTC USB Driver that is called for in the wireless modem section of the users guide.
I have seen some information about using ICS, but nothing to tell me how it works or what I need to do to get it to work. Is it a matter of installing Active Sync onto the laptops I want to use, then kick off ICS to access the web from the laptop?
Thanks,
Bobby

i too have been desperately searching for this. I can't seem to find anything. This laptop is my primary computer so it already has ActiveSync and the Tilt setup, but it won't recognize it once I switch the phone into "wireless modem" mode (where it deactivates the activesync functions)

Is this what your looking for?

Internet Sharing
2001bmw330xi said:
i too have been desperately searching for this. I can't seem to find anything. This laptop is my primary computer so it already has ActiveSync and the Tilt setup, but it won't recognize it once I switch the phone into "wireless modem" mode (where it deactivates the activesync functions)
Click to expand...
Click to collapse
I'm sure this has already been covered somewhere... but, did you search for the standard Internet Sharing app that was supposed to be on WM6 ROMS by default? I bought my Tilt 2 weeks ago, am on the stock ROM, and found the app hidden in \Windows and it works fine here. If you find it there just create a shortcut and place it in \Start\Programs or wherever you want.

ercave1 said:
I'm sure this has already been covered somewhere... but, did you search for the standard Internet Sharing app that was supposed to be on WM6 ROMS by default? I bought my Tilt 2 weeks ago, am on the stock ROM, and found the app hidden in \Windows and it works fine here. If you find it there just create a shortcut and place it in \Start\Programs or wherever you want.
Click to expand...
Click to collapse
i tried to use the internet connection share - but it wouldn't work either. it kept showing me the bubble (starting GPRS, Edge, 3G connection) and then eventually said "the remote party has ended the connection"
EDIT: never mind, got it to work! Had to change "Network Connection:" from "AT&T ISP" to "MEdia Net".

what am I missing
So to get this to work all that needs to be done.
connect phone to laptop (regardless of O/S Version) via USB cable
start ICS and you are off and running?
No driver install is needed on the laptop (including no activesync install needed), is that correct?
Thanks,
Bobby

Instruction for setting up Internet Connection Sharing
I was able to locate instructions on how to set this up on the Tilt (located in the HTC Tytn II users manual). I have included the section referring to this below so others who may want to know how can get it up and going.
Thanks,
Bobby
========================================================
10.9 Using Your Device as a Modem
(Internet Sharing)
Internet Sharing connects your PC or notebook computer to the Internet by using your device’s data connection (GPRS or EDGE, for instance). You can choose to connect via USB or Bluetooth.
Follow the procedure in this section to set up your device as a USB modem. To learn how to set up your device as a Bluetooth modem, see “Use the device as a Bluetooth modem” in this chapter.
Notes • Make sure your device has a SIM card installed, and your device has a GPRS or phone dial-up modem connection. If your device has not been set up with a data connection yet, tap Menu > Connection Settings on the Internet Sharing screen.
• If you want to use a USB cable connection, you must first install Windows Mobile Device Center or Microsoft ActiveSync version 4.5 or later on the computer.
• Before using Internet Sharing, disconnect from Windows Mobile Device Center or ActiveSync on your computer.
• On your computer, run 3gnetopt.exe from the Application Disc to optimize the connection speed between your device and computer.
To set up your device as a USB modem
1. On your device, tap Start > Programs > Internet Sharing.
2. In the PC Connection list, select USB.
3. In the Network Connection list, select the name of the connection that your device uses to connect to the Internet.
4. Plug in the USB cable between your device and the computer.
5. Tap Connect.
To end the Internet connection
On the Internet Sharing screen, tap Disconnect.

hope this helps someone
Hey guys, I usually try and post whenever I finally figure something out...I was getting the error message: Cannot Connect "the remote party has ended the connection" and from some of what I was reading it was because I was trying to use internet sharing with a mediamax $20 plan and I wouldn't be able to do that any longer because of something embedded in WM6 which told AT&T that I was tethering. Well my laptop is connected right now via usb through internet sharing on WM6 on my 8925/tilt and I have the $20 plan. I just checked my speeds and I am at 1485kb/s upload and 339kb/s (is that good?) seems much faster that wireless modem connection I used to use on 8525 w/ wm5. Internet sharing is the way to go. I am not exactly sure what fixed my problem--I did a few things and finally stopped getting the cannot connect: remote party...error. I first erased the user name and password under the connection settings ([email protected]) and left both fields blank. That didn't fix it like it did for some others that I read about so I did a power down and power back up (not sure if this is different than a reset with the stylus in the hole). Still wasn't fixed...On the internet sharing screen the second box under network connection I changed from "AT&T isp GPPRS" to "media net" and then connected and it worked. I don't think I need the username and password for anything because I can still browse on the phone without them--not sure why they were there. I haven't checked to see if I can internet share with the password and username reinserted...Hope that helps someone else out...don't give up it is possible to internet share through mediamax $20 with WM6...

Quick Fix For Those who couldn't figure it out
On your AT&T Tilt or (Possibly any Windows Mobile 6 Device)
Navigate to your "file explorer"
Step 1 (Locate the File Explorer) Not Internet Explorer
Start > Programs > Tools > File Explorer
(Possibly) Start > Programs > File Explorer
(Possibly) Start > File Explorer
Step 2 (Using File Explorer navigate to "My Device")
Then Locate the "Windows" Folder
Scroll all the way down to InternetSharing (Press the letter "I" to get you there faster)
Have your the device plugged into your computer and run that application and make sure these 2 options are selected:
PC Connection: USB
Network Connection: Media Net
Hit Connect
If it doesn't connect for you right away or gives an error message try this:
Unplug your phone from the computer
On the internet sharing application press Connect and immediately connect the USB cable.
Hope this works for others.
Have a data plan with at&t or you might be seeing some rather large charges on your internet bill.

Sane said:
Is this what your looking for?
Click to expand...
Click to collapse
Is that a USB RNDIS driver? As in no need for activesync?
I know it is possible, as I used usb-rndis-lite to use my kaiser as a modem on linux, but I never found anything that allowed me to share the conn via usb without activesync.
FYI, for those who do not have activesync for whatever reason, WMWiFiRouter will let you do it via WiFi.

The easiest way.
Just install the latest activesync.
If you don't want it syncing, no problem. Just right click on the activesync icon in your task bar, go to connection settings and uncheck allow USB connections. You'll still be able to use Internet Sharing but it won't try to sync every time.
After you have activesync on your computer you'll be able to use the Internet Sharing all you want. Just be sure you press connect on your device before you plug the usb cable in. Otherwise sometimes it won't connect.

Don't abuse it, or most likely your provider will slam you with tethering charges if it's very obvious you're using it. Assuming you don't have a tethering plan, of course.

Sometimes (eg on a corp laptop) you are not allowed to install activesync for example, but a driver would be OK - so it's always good to have alternatives.
Not so much of an issue now as WMWifiRouter is a more universal solution, but not all machines have wifi, so an RNDIS driver for USB would still be nice to have handy.
Been on T-Mobile web'n'walk (the basic one, not the tethered one) for over 6 months now, I use tethered mode on a daily basis, not had any complaints or charges yet. Mind you, I don't really hammer it, just web pages, ppc app downloads, a bit of youtube maybe. They could probably tell by looking at the browser IDs, but I doubt I am top of their list.
Even if they do hit me with the charge for the "Pro" version that allows tethering, it's only another £5 a month and I am on the lowest voice tariff anyway as I have an HTC original and not a subsidised phone.

WOW!!!! I can't believe this thread went as long as it did. Grats to DuMnUt101 and Evilc.. I wish I had my usb cable here with me so I could test the active sync part. Did this guy ever get it working?

The driver attached previously is not a ICS driver but a modem driver - you need to supply APN, username and password. Could possibly work, but when I run the EXE, it does not detect the phone as a modem.

bwc302 said:
I have been working on setting up Internet Sharing on my laptop(s) for a few days now and have searched and read through the forums to no avail. I need the USB Modem Driver for Win2K and XP (SP2 if it matters). I put the set up CD in and searched it, but it list drivers only for Vista (32 and 64 bit).
Does anyone know a solution for this or know how to get hold of these drivers?
Thanks for your help.
Bobby
Click to expand...
Click to collapse
Hi,
If you want to use internet sharing from HTC Modem via USB you just have to activate that functionality on the phone and then connect the USB cable to your PC.
Your windows will ask for drivers if you dont have ActiveSync4.5 installed (XP/NT2000/NT2003).
If you have ActiveSync already installed (this will install usb modem drivers you need) then you should have no problem with drivers and will be ready to use your mobile's shared internet.

bwc302 said:
I have been working on setting up Internet Sharing on my laptop(s) for a few days now and have searched and read through the forums to no avail. I need the USB Modem Driver for Win2K and XP (SP2 if it matters). I put the set up CD in and searched it, but it list drivers only for Vista (32 and 64 bit).
Does anyone know a solution for this or know how to get hold of these drivers?
Thanks for your help.
Bobby
Click to expand...
Click to collapse
Hi,
If you just want to use internet shared by your phone on your PC, you just have to install ActiveSync4.5 (this will install the usb modem drivers required).
This will set you ready to use the mobile's internet on your PC.
After this you can always get the drivers using "Device Manager".
Hope this is the answer you wanted!

Double post from out of no where..
Nothing to see here.

cant browse IE on kaiser thru active sync connection

aparently i have no COM ports avaible, so i cant browse the internet. im not sure how to fix this, but im also not sure if it's just a problem on my kaiser? when i try to go on the internet it tries to connect to 3G, but i want to use active sync

You want to connect to the internet through your home pc via usb/BT?
You might want to try this.. I'm not SURE, just offering a suggestion.. someone can confirm/bunk this either way..
Start|Settings|Connections|Connections
One of the settings there might work for you,
If not.. theres a Little blue Question mark in the top right that actually has some pretty in depth info..
Sorry I couldnt be of more help, but it's a start.

Is ActiveSync actually working for you? I mean... is your Kaiser synching with your PC?
If activesync is working fine, try this on your PC (not on your Kaiser).
Open Regedit and go to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Create a new DWORD data type called "AllowLSP" and set it to 0
Plug your Kaiser again and let me know if it worked.

Monrad said:
Is ActiveSync actually working for you? I mean... is your Kaiser synching with your PC?
If activesync is working fine, try this on your PC (not on your Kaiser).
Open Regedit and go to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Create a new DWORD data type called "AllowLSP" and set it to 0
Plug your Kaiser again and let me know if it worked.
Click to expand...
Click to collapse
Hey m8, i have the same problem and i have tried to follow ur remedy
how ever still i am getting the error "the page cannot be displayed or downloaded because the connection was lost. check the connection and try again later." cannot connect... this is the same with Opera as well.

any having the same problem? is there any one with a fix for this...

sultan said:
any having the same problem? is there any one with a fix for this...
Click to expand...
Click to collapse
if i'm reading right you want to use internet sharing using usb or bluetooth and browse the internet using your PC?? is it?
1.first open setting in your active sync then uncheck allow the usb connection .
2.plug in the usb cable to ur pc and kaiser
3.open the internet sharing in your kaiser end select conection typ usb or bluetooth.
4.connect. (your computer will be installing rds driver automaticcaly)
5.then you'll have a gprs internet trough your pc
note you must have gprs/3g connection available in ur network.
in ur pc in the internet connection option makesure you select direct connection if you use firefox/opera.
Hope this solve your problem.

mikeeey said:
aparently i have no COM ports avaible, so i cant browse the internet. im not sure how to fix this, but im also not sure if it's just a problem on my kaiser? when i try to go on the internet it tries to connect to 3G, but i want to use active sync
Click to expand...
Click to collapse
You are wanting to browse IE on your phone using the Activesync usb or BT connection (phone uses PC's internet connection for data) am I correct in thinking that?
I'm not sure what you mean by 'No comm ports available' as your WM device connects via USB?
Sorry if these steps may seem a bit condecending but best to check all.
1, Has your PC got a working internet connection (can you browse IE on your PC) ?
2, Is Activesync actually working (your contacts and mail are sync'ed) ?
3, In connection settings on Activesync (PC) you need 'Allow wireless connection' unchecked (Checked for tethering, PC goes through phone 3G) or phone will try to go through any data connections of its own first.
4, On your WM device under 'Settings' 'Connections' 'USB to PC, check the 'Enable advanced network functionality'
Hope this helps.

I have a similar query, I can use my PC's internet connection from home, but when I connect to my work PC it does not. Now I know this is down to the fact that my Work PC uses a proxy server, but how do I add this info in to my Tytn2.

Hi Farsquidge,
I have followed your steps above, but when I try to connect to IE on my device, I get the message "The current connection cannot be used for your request. Please end the current connection and try again."
Any ideas?
Also, many thanks for the widespread advice you have given throughout the fora - it has really helped me get the most of out of my TyTN2!
Sarj

fisha21 said:
Hi Farsquidge,
I have followed your steps above, but when I try to connect to IE on my device, I get the message "The current connection cannot be used for your request. Please end the current connection and try again."
Any ideas?
Also, many thanks for the widespread advice you have given throughout the fora - it has really helped me get the most of out of my TyTN2!
Sarj
Click to expand...
Click to collapse
Your welcome.
Is your device an 'out of the box' HTC device that was not bound to a carrier contract? Some carrier (ie. AT&T Vodaphone) seem to have settings within the ROM (seen in other threads) that tie you in to only using their settings (ie Media.net) and using a proxy that cannot be changed for IE only for GPRS connections.
Anyone got ideas on this one.

Unfortunately, Orange UK got their hands on my TyTN2 before I did! Perhaps that's the source of my problems?

fisha21 said:
Unfortunately, Orange UK got their hands on my TyTN2 before I did! Perhaps that's the source of my problems?
Click to expand...
Click to collapse
Are Orange UK (I am from UK but living abroad now) still wanting to promote their own Internet?
I know only last year a pal of mine said he could not connect his Nokia through his home WiFi because it would not connect via his BT Internet.
Check if you have a proxy connection set up on your GPRS cause ya never know!!!

I can connect to any Wifi network and access webpages without problems. Doesn't seem that there are any restrictions from that point of view. Thanks for the help - guess it's not really a problem not having Internet access via ActiveSync, as it connects to the Wifi network.

i guess i shoulda been more specific.
i wanted to browse the internet on my kaiser, using the active sync connection. however it wasnt working, but now ive re-installed opera and it works with that, not sure if it works with IE yet.

installed Opera and still no hope.

my tytn II is out of the box, not on any contract with an operator. can any one please help me..