What is the significance of running SetOperator when flashing between ROMs? In the wiki it just says
This is the code of how your device was sold as, not what SIM you are using.
Click to expand...
Click to collapse
1) Would you mess up your device if you forgot to do this when flashing?
2) Does it make a difference what the operator is?
3) Mine says CDL__001, what does that stand for? Couldn't find a list.
first off, if you forget to do the SetOperator thing, the software wont even allow you to flash the rom. I know from first hand experience. I believe the importance of SetOperator is that each of these devices has its unique operator code, and using SetOperator modifies the rom you try to flash to match the operator ID your device needs in order to be upgraded. I have an SX66 from Siemmens/Cingular, so by doing the command SetOperator Cingular, the rom is patched to be used on my device...
There is one thing I don't understand. I did only retrieved the correct operator data during the first update from 2003 to Tuma 1.4, i.e. O2ASI602 by GetDeviceData.exe.
When I tried to migrate to Helmi's Roms, the returned code is simply gibberish. Then I try to use the PH20B1 folder and used MaUpgradeUt_noID.exe and simply skip the SetOperator step. The ROM installed without any problem.
THe BA works kind of OK but with recurring hangs during night time (prolong idle period) and I need to reset the machine to make it working again.
IS my installation by the above step compromising the reliability of Helmi's ROM?
Related
I got now:
IPL, SPL: 1.03
GSM: 1.4.10.0
OS: 1.3.2.3
ROM versie: 1.3.2.3 NLD
Radioversie: 01.04.10
Can you tell me.. do i need to upgrade? What will be better when i upgrade?
With which ROM do i need to upgrade?
Please help.
Qtek ROM version 1.6.7.1
In my humble opinion; Qteks 1.6.7.1 ROM is the most stable ROM to date. Everything works perfectly for me with all my 3rd party software installed too!!
PS if you haven't already done so, you can totally unlock your phone from T-mobile by following the following instructions. Also do searches for the quted software (download them first):
mackaby007 said:
abgarman said:
hey mackaby007!
I wonder whether you had any problems during new rom installation...
I tried this ROM, but after the installation was finished, Etx_rom installed and system rebooted I got a "device locked message. illegal ROM, given only to customers who bought their wizard/qtek at ...[]" I had to go back thru several instals to restore my original ROM (which i never truely accomplished - i have no ability to change ring tones and assign them to different contacts)
Click to expand...
Click to collapse
Hey back at ya.
First download lokiwiz v2b. Don't use previous versions or you'll not get through this!!
Hard reset your device (not necessary, but it ensures you'll have no hassle with Activesync).
Done that? Good. Extract the lokiwiz v2b .zip folder and copy enablerapi.cab to your memory card or to 'My Documents' folder on your device. Then execute the 'enablerapi.cab'.
Done? Just switch off the device (power button; put it in standby mode).
If you have Activesync already installed, un-install it and re-install directly afterwards (ensure a brand new partnership).
Then when prompted by Activesync, plug in your USB cable PC-PPC and it should recognise as usual.
Then execute the lokiwiz.bat file (in the folder that was generated earlier when you extracted the lokiwiz02b.zip file) and when you see the MS Dos (black screen) choose the option CID Unlock (SuperCID) and wait for it to COMPLETELY finish. You'll know it's finished when your Wizard is re-booting. Plug out your USB cable at this stage.
Once re-booted and back into WM5, re-connect your cable and if all goes well it should re-connect to Active Sync (wait till it has finished syncing or says connected!).
Finally......double click the executable file, which should be:
RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe
Hopefully it will now install the ROM without hiccups (about 10 minutes).
Hope this helps. let us know how you get on.
Click to expand...
Click to collapse
I searched the whole forum.. I i unlocked my Vario 15 minutes ago. Thanx a lot!!
Re: Qtek ROM version 1.6.7.1
Will the follwoing also work with the Cingular 8125. I haven't SIM unlocked it yet. Also, is a SIM unlock the same as a CID unlock. Is there tow different things that need to be unlocked. And which do I do first, if there are two things that I must unlock. Thanks for the help...and sorry if this questions has been answered before...
-OnImpulse-
mackaby007 said:
In my humble opinion; Qteks 1.6.7.1 ROM is the most stable ROM to date. Everything works perfectly for me with all my 3rd party software installed too!!
PS if you haven't already done so, you can totally unlock your phone from T-mobile by following the following instructions. Also do searches for the quted software (download them first):
mackaby007 said:
abgarman said:
hey mackaby007!
I wonder whether you had any problems during new rom installation...
I tried this ROM, but after the installation was finished, Etx_rom installed and system rebooted I got a "device locked message. illegal ROM, given only to customers who bought their wizard/qtek at ...[]" I had to go back thru several instals to restore my original ROM (which i never truely accomplished - i have no ability to change ring tones and assign them to different contacts)
Click to expand...
Click to collapse
Hey back at ya.
First download lokiwiz v2b. Don't use previous versions or you'll not get through this!!
Hard reset your device (not necessary, but it ensures you'll have no hassle with Activesync).
Done that? Good. Extract the lokiwiz v2b .zip folder and copy enablerapi.cab to your memory card or to 'My Documents' folder on your device. Then execute the 'enablerapi.cab'.
Done? Just switch off the device (power button; put it in standby mode).
If you have Activesync already installed, un-install it and re-install directly afterwards (ensure a brand new partnership).
Then when prompted by Activesync, plug in your USB cable PC-PPC and it should recognise as usual.
Then execute the lokiwiz.bat file (in the folder that was generated earlier when you extracted the lokiwiz02b.zip file) and when you see the MS Dos (black screen) choose the option CID Unlock (SuperCID) and wait for it to COMPLETELY finish. You'll know it's finished when your Wizard is re-booting. Plug out your USB cable at this stage.
Once re-booted and back into WM5, re-connect your cable and if all goes well it should re-connect to Active Sync (wait till it has finished syncing or says connected!).
Finally......double click the executable file, which should be:
RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe
Hopefully it will now install the ROM without hiccups (about 10 minutes).
Hope this helps. let us know how you get on.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Re: Qtek ROM version 1.6.7.1
OnImpulse said:
Will the follwoing also work with the Cingular 8125. I haven't SIM unlocked it yet. Also, is a SIM unlock the same as a CID unlock.
Click to expand...
Click to collapse
I don't know if this will work with the 8125, but If under 'Start/Settings/System/Device Information/Identity' it says 'WIZA200', i would assume so, as it was created for the HTC Wizard, but I'm not sure.
As for totalyy unlocking your phone, YES it will. CID Unlock did it for me, but I'm not the developer of this software so am not in the best position to advise if it is suitable for anything else other than a Wizard.
Hope this helps.
I get te following message when I run lokiwiz.bat
CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
ECHO is off.
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Click to expand...
Click to collapse
The device does not reboot and the ROM upgrade afterwards fails. Any tips?
hav0c said:
I get te following message when I run lokiwiz.bat
CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
ECHO is off.
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Click to expand...
Click to collapse
The device does not reboot and the ROM upgrade afterwards fails. Any tips?
Click to expand...
Click to collapse
First download lokiwiz v2b. Don't use previous versions or you'll not get through this!!
ROM
When I double click on the new Rom, does it erase everything on the Vario (Programs) ?! Do I first have to sync and then put the new rom on it !?
what r the main diffrences between the roms ?
I have a T-Mobile Vario with a german rom and I'm thinking about putting the RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship or the
RUU_Prodigy_1060701_101_11310_QTEK_GER_Ship
on it, which one is better and again what r the differences between those two and the original ?
or is there even a better one !?
greetz
Absolutely 100% perfect working tutorial. CID unlock worked as did the new ROM. I too changed form MDA T-mobile NL version to Qtek WWE one.
Great tips. Thank you very much, you just saved me a few 100 euro's, and I got a device which is useful and faster.
Hi there
I'm trying to downgrade my Qtek9090. I have WinMob 5 and I want it to be the Rom from http://www.orange.ch/offers/orangePhones/spvM2000/spvM2000Rom?ts=1144157178509.
Now, I got the MaUpgradeUt_noID.exe and I did just use it like its written...
Now I have Win2003se but none of that stuff provided by Orange in this Rom (At the first start it said some stuff was missing and it xould be deleted). Then I tried again without the MaUpgradeUt_noID.exe and still get a country error...
Do I have to re-partition the memory like I did for the WM5 update?
Thx for answers...
greetz
Well for wm5 you most lickly got rid of your ext rom as you wanted it for storage.
So now there is no place to flash the extrom so the cabs that are part of the extrom do not run and thus you get no ORANGE related files.
What you need to do is create a new EXT rom partion and flash the rom again.
This time you can delete the radio.nbf and the NK.nbf and just leave the MS.nbf (it will be a lot faster).
First of all, thanks for the reply!
great...now, how do I do it? Do I need a special size of the rom?
Sorry to say this but.....
Please read wiki
Ta
For more info you can read here
omfg this looks like work..
Sorry MDAIIIUser I used the search button (but only for the forum, my bad)...But anyway, I know you are very busy just read some threads while waiting for an answer...But you're doing a great job...All of the people here in fact...
i'm also downgrading to WM2003SE according to the directions on wiki,
BUT i have 2 questions:
1. i bought my qtek 9090 as a stand-alone qtek9090 (so not combined with a provider). does this mean i don't need the Extended ROM?
2. i aksed this question in another topic aswell, but lateron i found that this topic is more acurate to my question..so sorry for that!
here's the question:
in the manual, it says I have to download my latest favorite WM2003SE ROM version (which in my case is the Dutch Qtek DANGA001 version 1.40.00, EXTROM 1.40.556),
and FROM that file i should copy the nk.nbf to my "\DOWNGRADE TO WM2003SE\" folder..
and THAT'S what seems impossible to me, since the Rom-update i downloaded is an .exe application, and not a .zip or .rar archive..
so how should i get/extract/copy the nk.nbf file out of this Rom-update .exe file..?
i simply skipped that step but now my device keeps crashing every minute (even DURING soft and hard resets!)
HELP!
spdfrx said:
and THAT'S what seems impossible to me, since the Rom-update i downloaded is an .exe application, and not a .zip or .rar archive..
so how should i get/extract/copy the nk.nbf file out of this Rom-update .exe file..?
Click to expand...
Click to collapse
execute the application and search in C:\Documents and settings\NAME\Local settings\Temp for your file.
if you don't find it, continue on your application and try again.
thats how i had to do extract the files from my swisscom update file (wich was an exe file too)
I downgraded my spv m2000 from wm5 to 2003 and everything is fine apart from the phone doesn't work.
It just says no service all the time, can anyone help please?
Thanks.
Check the radio version on the boot screeen to see if the device sees it.
Check that you see the version under settings.
Check that you have a sim in the device
Check that you not in flight mode.
ok now onit thanks for the quick reply
Be also aware that in the boot process the radio can sometimes not load, no know reason for this but fixed with a soft reset (stick up the hole).
My device sees the radio version on the boot screen (1.06.02)
I can see the version under settings and i have a sim in and flight mode is off but still no luck.
Shall i try another sim?
Try your sim in another phone (and another sim in that phone).
What do you see at the top of the screen (should be a bar chart with an x) if you have no link.
I put another sim in and now it's all fine GPRS and Phone works
thanks for the help.
Would the device be affected if you had a pin code on the sim?
The sim code is only for the sim card.
Without the sim pin code you can not unlock the sim card.
Thus the radio will not connect to a carrier and you will not beable to phone out.
A phone lock is a lock that stops you putting in a different sim card into the phone (thus you need to stay with the same carrier)
This is a device lock and needs to be unlocked on the device to be able to put in a different sim from a different carrier.
Tool found on wiki
I would think that your first sim is either no longer valid (out of date or is a pre-paid with no money) or it has a sim lock that you dont not have the pin code of and failed to mention that it asked you for it.
Anyway have fun with the BA and read wiki for more info.
Thanks
Eager to be able to use the GPS in my phone I began upgrading it with the new dopod-ROM. I unlocked it with the sspl-trin.exe and started the process. After approx 58% of upgrading it halted, complaining about communication error. The upgrade program asked me to remove the battery for 3 seconds. I did so and the screen returned to the red,green,blue-thing. The upgradeprogram now complains about the CID, since the sspl-trin.exe is not running, and it won't install the new ROM. Niether do I find a way to get back to my old ROM. I guess I need to install the old one again...
Where can I find an old ROM?
Can I fix the phone without reinstalling?
I'm stuck with the RGB-screen and can't do anything at all with my precious piece of plastic, so please help!
/ Pete
Magician -> Tornado -> Trinity
pter said:
Eager to be able to use the GPS in my phone I began upgrading it with the new dopod-ROM. I unlocked it with the sspl-trin.exe and started the process. After approx 58% of upgrading it halted, complaining about communication error. The upgrade program asked me to remove the battery for 3 seconds. I did so and the screen returned to the red,green,blue-thing. The upgradeprogram now complains about the CID, since the sspl-trin.exe is not running, and it won't install the new ROM. Niether do I find a way to get back to my old ROM. I guess I need to install the old one again...
Where can I find an old ROM?
Can I fix the phone without reinstalling?
I'm stuck with the RGB-screen and can't do anything at all with my precious piece of plastic, so please help!
/ Pete
Magician -> Tornado -> Trinity
Click to expand...
Click to collapse
Check FTP for HTC shipping ROMs if your device was non-branded.
If upgrade soft complains about wrong CID for HTC ROM, try to run the upgrade program with a Dopod shipping version (so that it matches CID you currently have)?.
As a last resort you can try to perform the upgrade from miniSD card, refer to instructions elsewhere on this forum.
Technically as long as IPL and SPL are ok (which seems to be the case since you get to bootloader screen), it should be possible to flash one ROM or another one.
Good luck!
Ok, some additional information.
I've tried the english HTC ROM available on the xda-ftp but it complains about the vendor ID. Mtty.exe says that my ID is 'HTC__G09' and G09 probably refers to a swedish company in some way.
I threw away 20£ on an unlock that couldn't be run without active sync. This could be read in the instructions, but I kind of gave it a shot, beeing a poor student and all. :/ Oh God I'm stupid....
Now some additional questions...
Is it possible to get a working ROM from a similar device with the same vendor?
Is it possible that there is a file ready to send to me somewhere in the galaxy? Who should I ask to prevent myself from getting the "send it to us"-answer?
Try to update the ROM with matching CID of yr handset.Check Wiki reg this.After update if it stucks on the same screen then type "set 14 0" (without commas) in mtty utility.
Ok... Tried the miniSD-way but it didn't work. ("not allow" was the answer from my display) My CID differs from all in the list so it's really no surprise. The CID seems to be the key here.
My Dopod D810 (trinity) goes logo screen and stops running after an upgrade failure. I can run bootloader 1.07.0000 I also hope someone can upload an original ROM for my salvage.
hdubli said:
Try to update the ROM with matching CID of yr handset.Check Wiki reg this.After update if it stucks on the same screen then type "set 14 0" (without commas) in mtty utility.
Click to expand...
Click to collapse
pter said:
Ok... Tried the miniSD-way but it didn't work. ("not allow" was the answer from my display) My CID differs from all in the list so it's really no surprise. The CID seems to be the key here.
Click to expand...
Click to collapse
You may want to check out this thread:
http://forum.xda-developers.com/showthread.php?t=294046
If you create a .nbh with the CID as you device shows it, it might accept a cooked ROM with matching CID. If IPL/SPL gets damaged, though, it will get worse.
So, what's it mean when you run GetDeviceData.Exe and all you get in your ../windows/devicedata.txt file is "PH20B" ?
Strange, huh? I've tried it a couple of times. Always the same... Nothing but "PH20B". I'm also having the "No GSM" in the boot screen problem, and can't upgrade (well, load AT ALL!) my radio stack. In my device info screen the OS and Extended info are right, but Protocal and Radio are both blank now. This has all happened after trying to do a ROM upgrade tonight.
1. What (exactly) device you own? What was DeviceData BEFORE first upgrade?
2. What ROM you had, and which one you tried to load?
3. How did you do that (what procedure)? Have you omitted any steps?
Lets say you really own PH20B (Blueangel) then if the radio is inactive the devicedata.txt will not output the info from it. Reflash radio only
Also this may happen if you have flashed PH20A (Harrier) and you flashed WM5, go back to WM2003 and all will work fine
jakubd said:
1. What (exactly) device you own? What was DeviceData BEFORE first upgrade?
2. What ROM you had, and which one you tried to load?
3. How did you do that (what procedure)? Have you omitted any steps?
Click to expand...
Click to collapse
Answers:
1: It is a HTC BlueAngel. It's one of those with just "PocketPC" on the front. No cell provider branding. I bought it off ebay last year. Don't know what the file showed before. Never had a problem, so I never looked.
2: Was running a I-Mate ROM since I bought it. But the radio was really old. The radio version was like .9xx . Don't remember exactly what. SHould have written it down. But it was less than 1.00, I know that for sure. I was upgrading to the Siemens 1.33 ROM with the 1.15 radio added on.
3: Used MaUpgradUt_NoID. Never been able to use BaUpgradeUt. It's always given a country ID error, but Ma..NoID has always worked before.
xplode said:
Lets say you really own PH20B (Blueangel) then if the radio is inactive the devicedata.txt will not output the info from it. Reflash radio only
Also this may happen if you have flashed PH20A (Harrier) and you flashed WM5, go back to WM2003 and all will work fine
Click to expand...
Click to collapse
Yes. It is a blue angel for sure. See my reply above.
It's always been WM2003, and all I get when I try to flash ANY radio rom version to it now is a country ID error.
flash with noid app
maupgradeut_noid.exe
Yep. Already tried that. In fact, that's the ONLY way I've been able to do any upgrades at all since I bought the phone. Never have found a ROM that would work with BAupgradeUt.exe. Strange thing is, I can load the OS and EXT ROM's no problem using Ma..NoID.exe... Just not the Radio ROM. Even using NoID when I try to load a Radio ROM, it dies with a country code error. I believe the error is N-N-50-50-50 if that means anything to anyone. Any more ideas? I've tried all the obvious things I could think of. I wonder if maybe I could use a null data field in editfix.bat? That is, instead of using real data values from devicedata.txt like you normally would, replace the "???" in the .bat file with " ". Anyone know if that's even possible? Or should I just try taking it up to WM5, then back to 2003?
Thanks for all the thought and effort so far folks.
does anyone know why my imate kjame would give an error or Windows/autoconfig.exe doesnt exist.
i have tried a number or roms but the phone failed to upgrade to wm6. it then reverts back to the wm5 after encounting this error.
i have tried the CID unlock but there is no hope
can anyone please assist me urgently.
ghumanfly said:
does anyone know why my imate kjame would give an error or Windows/autoconfig.exe doesnt exist.
i have tried a number or roms but the phone failed to upgrade to wm6. it then reverts back to the wm5 after encounting this error.
i have tried the CID unlock but there is no hope
can anyone please assist me urgently.
Click to expand...
Click to collapse
We need more information than this if you want help...
1. Wireless Carrier?
2. IPL/SPL?
3. Roms tried?
4. How have you been trying to flash roms? What method of flashing?
5. What is your PC's operating system(your computer, not PPC)
EDIT>> Answer these questions for me and I will try my best to help you tomorrow some time. I live in Cental US so I might not get your messages until later tomorrow your time but I will respond in the morning tomorrow.
info
forgive me if there is anything that i dont get correct....
1. Wireless Carrier?
i am assuming that this is the service provider and that is vodacome for me. it is a not the same as vodafone however they have a JV running
2. IPL/SPL?
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
3. Roms tried?
i tried one of the ROMs that my IT team provided to me. i have attached the rom.
i also tried Octvio's rom (ROM_Wizard_OCTAIVOI_OS_1908_v4[1].8_PP6MB)
i also tried CB-AIRAF
4. How have you been trying to flash roms? What method of flashing?
here i loaded the EnableRapi cab file and ran it on my wizard. then i ran the lokiwiz.bat file on my machine. i didnt see any error there so i take it that it ran fine.
5. What is your PC's operating system(your computer, not PPC)
i am running XP SP2 on my notebook.
couldnt attach any of the files... not sure what was causing the problem
ghumanfly said:
forgive me if there is anything that i dont get correct....
1. Wireless Carrier?
i am assuming that this is the service provider and that is vodacome for me. it is a not the same as vodafone however they have a JV running
2. IPL/SPL?
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
3. Roms tried?
i tried one of the ROMs that my IT team provided to me. i have attached the rom.
i also tried Octvio's rom (ROM_Wizard_OCTAIVOI_OS_1908_v4[1].8_PP6MB)
i also tried CB-AIRAF
4. How have you been trying to flash roms? What method of flashing?
here i loaded the EnableRapi cab file and ran it on my wizard. then i ran the lokiwiz.bat file on my machine. i didnt see any error there so i take it that it ran fine.
5. What is your PC's operating system(your computer, not PPC)
i am running XP SP2 on my notebook.
Click to expand...
Click to collapse
Ok I see that you have a G4. Lokiwiz is a waste of your time since you have a G4.
Here is what you need to do:
Because you have a G4, you can't just flash a rom because of the DOC chip.
There are 3 ways I know of to flash a G4.
1. Download shelltools - install enablerapi.cab and cert_spcs.cab and reboot your device. connect with activesync and place the nk.nbf file of the rom of your choice in the shelltools directory and run shelltools and follow the directions in the readme. If you do it correctly, you will end up successfully flashing your device.
Link: http://forum.xda-developers.com/showthread.php?t=293480
2. Download SoftSPL and place the nk.nbf file of your choice in the RUU folder included and run SoftSPL and it is fully automated. It will call the RUU and your device will be flashed in about 7 minutes.
Link: http://forum.xda-developers.com/showthread.php?t=329147
3. Use the HardSPL(CID UNLOCK) and unlock your device prior to flashing. This will allow you to just flash roms at your leisure with no problems whatsoever from now on BUT it is still in developement so use at your own risk.
LINKS: http://forum.xda-developers.com/showthread.php?t=332330
http://forum.xda-developers.com/showthread.php?t=332320
I hope this helps you. I personally have a G3 so this is not my area of expertise...
wm6
thanks alot me. it upgraded properly
i am trying get all add ons.
ghumanfly said:
thanks alot me. it upgraded properly
i am trying get all add ons.
Click to expand...
Click to collapse
No problem... Now you're at the fun part. Add ons!!
add ons
when it comes to add ons,I was reading on the Rom Kitchen thread and and I couldn't see much more that could be added to the rom that Faris V5's nbf file.it seems to be one of thee most comprehensive files that I have come across. the only issue is that it runs a bit slow but it cool.I might just need to do some memory management.
other than that I would recommend the file.
do you have any other recommendations?
have u seen the article that microsoft wants xda dev... to remove all of its roms from the website?
ghumanfly said:
when it comes to add ons,I was reading on the Rom Kitchen thread and and I couldn't see much more that could be added to the rom that Faris V5's nbf file.it seems to be one of thee most comprehensive files that I have come across. the only issue is that it runs a bit slow but it cool.I might just need to do some memory management.
other than that I would recommend the file.
do you have any other recommendations?
have u seen the article that microsoft wants xda dev... to remove all of its roms from the website?
Click to expand...
Click to collapse
I personally use the TNT.1437 TouchFlo and TNT.1437 Professional+HTC Home roms personally modified to have a 10MB page pool. They are quite fast and are almost 100% stable with only minor bugs that are barely noticible...
Here is a link to the 10MB Version of TNT.1437 Touchflo
http://www.megaupload.com/?d=TM2N1W2R
Here is a link to the 10MB Version of TNT.1437 Prof+HTC Home
http://www.megaupload.com/?d=RZFKY868
If you would like, I can speed up the performance of faria's rom also and then upload the new nk.nbf file for you to try. Just let me know.
speed
Yes, please.... speed it up for me. if there are any other applications (add ons) that you feel should be added to the nbf file then please add them.
i have already shared the nbf file with many guys at work. we would be grateful if you can assist.
one last thing, i noticed that there is a 3G icon under the comms manager. one of the guys said that we should not have any issues accessing 3G even if the phone didnt come with it. is it possible to use 3G on these phones?
cmd> prompt when i use mtty
--------------------------------------------------------------------------------
hi,
i;ve managed 2 screw up my wizard
everything was going well
i flased sucessfully 2 three different roms..
then i flased the tnt latest beta rom
i worked fine
i reflased the same rom by mistake as i wanted 2 flash a diferent rom
this is when the problem sarted..
the upgrade got stuck at 66%
i waited for 15 minutes..
then i disconnected the usb from the phone & since then the phones stuck in the bootloader..
i've used mty
this is where i'm in unknown teritory..
it gives me cmd> prompt
no USB prompt..
any sugestions??