Related
Hi guys,
I've accidently moved Autorun.exe from Extended_ROM to Storage on my XDA-III, Now my EPROM doesn't load into drives anymore. I tried reflashing ROM with i-mate_PDA2k_WWE_12200_162_10600_SHIP but it says: ERROR 100 MODEL ID ERROR 12-N-10-10-10 and exits.
I am completely lost what to do, as Storage where my Autoexec is doen't load anymore.
Any help is highly appreciated!
Maybe someone can just upload autorun.exe?
I thought maybe someone would be kind enough to upload their Autorun.exe file here, so I try launching it from RAM? Maybe it will load the drives? and I put the file at original location?
get on the ftp server, go to BlueAngel\Extended_Rom_Kitchen_1_3X\Autorun
It's right there :wink:
Can't login to FTP server, how should I log in?
User : xda
Pass : xda
Both in lower case. This forum automatically displays xda i uppercase.
user xda password xda (small both th post makes caps out of xda), there is also a 1.22 kitchen
Thanks for FTP info, I've downloaded all this, but it doesn't work. Totally lost at this point. I have no idea why it has stopped displaying ROM, even if I use xda-developers_Unlocker.
It also gives a message after reset in a window Connection Flash Manager - Saved data is corrupted, System will erase all data to fix this error! (Yes) (No)
Heres a strange one.....
Just recently tried to sync my MDA Compact 4 and got the following error message:
"Synchronization cannot be completed successfully. Reconnect your device and try again. If the problem persists, see the Microsoft ActiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop computer."
On investigating further, i tried the following suggestions:
- Turned off all firewalls
- Removed partnership between phone and pc (on both the phone and pc)
- Unchecked "Enable advanced network functionality" in USB to PC settings on the phone
- Reinstalled Activesync 4.5 (and also a tried a repair)
- Different USB cable and USB port (not using a USB hub)
- Several soft reboots
and finally tried a different PC just to see if i could get a guest partnership! Guess what? Same error message.
I am, however, able to explore the phone with activesync but only explore. I cant change file names, add files or delete.
On even further investigation, i've now also discovered that i cant delete/ rename files on the phone itself (using file explorer on either the device or internal storage). When i do, i get the following message:
"Cannot remove/ rename etc: Access is denied.
Be certain that the folder/file is not write-protected and is not currently in use"
(Even creating a new folder and then immediately trying to delete it gives the same error)
If i connect the phone to the PC as a disk drive though, i am able to delete files just fine. Add new files, rename them etc....without any problems.
This leads me to believe that the problem is with Windows Mobile!?!
Has anyone else experienced the same/ similar problem and figured out how to fix it? (Other than perform a HARD reset/ Clearing the storage)
Any help would be greatly appreciated.
Thanks
UPDATE:
I found this on the Microsoft help forum.
Although it hasnt fixed my problem, it might help someone else who is having the same problem.
1) soft reset device
2) Start / Office Mobile / Word
3) Create a new document (click on New)
4) type some text (just plain text - no formatting - it was 'plain text document') just a few characters
5) File / Save As...
6) I have selected type 'Plain Text'
7) It asked me whether I want to save it at 'Word document instead' - I clicked No.
8) I have powered off the device and did soft reset
9) Start file explorer, find the file (it was in My Device / My Documents), click on it - it opens Word again.
10) Add some formatting (I have selected part of text and changed font to bold)
11) Close Word - it asked whether to save it in Word format - this time I said Yes
12) Power-off the device and press soft reset again
Also, i noticed that i am able to modify any DOCX or TXT file within Mobile Word (and even delete them) just not from File explorer on the device or Explore within ActiveSync.
Can anyone help???
Same problem with different model
sh00ter said:
Heres a strange one.....
Has anyone else experienced the same/ similar problem and figured out how to fix it? (Other than perform a HARD reset/ Clearing the storage)
Click to expand...
Click to collapse
You're not alone. I have HTC Touch Pro (ie. Raphael) with exactly the same problem and I've also already tried that "Word-solution" several times without any help. However I can synchronize with my exchance server via 3G. I can also add/remove/rename files if I use some of the Office mobile applications, but not with file explorer.
Getting sooooo frustrated, but still not willing to do the hard reset.
Do both of you by any chance have Fsecure Mobile installed? Just trying to narrow the cause for the problem.
Same Problem Here
I have a T-Mobile Wing and I'm having the exact same problem. Anyone figure out whats up yet? It's so strange that I can delete/remove files and folders through active sync, but I can't through the device file explorer. I have also tried creating a folder with the file explorer, but then I cant delete, move or rename it.
Here's something that might work for you, http://www.24hsoftware.com/How-To/this-device-is-restricted-from-downloading-this-file-type.html
Unfortunately it hasn't work on any devices that I've seen but then again, I'm still thinking that F-secure mobile is causing the problems in our devices. F-secure has confirmed that they have heard about the problem and are investigating it.
This is very interesting as in the past 24 hours my Xperia X1 has started to do the same, I can create files ok but am unable to remove/copy files.
I am using f-secure mobile security, so it would seem there is an issue there. I'll fire an email to them to get myself on a fix list when it comes out if that's the problem!!
Any news on this issue?
I am using a trial version of F-secure mobile (on my SE Xperia, a sort of HTC ). Now, out of the blue I am experiencing similar problems:
- not able to connect to pc via Active Sync
- not able to delete/rename/copy files on both internal as external memory
- programlist appears empty
Did anyone try to remove F-secure to solve the problem?
Thanks.
I just got a reply from F-secure. They have identified the problem and are expecting to release a new version of the client within next two weeks.
Hopefully that's the end of this...
Meiz- said:
I just got a reply from F-secure. They have identified the problem and are expecting to release a new version of the client within next two weeks.
Hopefully that's the end of this...
Click to expand...
Click to collapse
Updated client was published on last friday.
I am experiencing a very similar problem on my HTC HD2 with wm6.5. If I connect the phone as USB mass storage i can copy files as much as I want to on the SD card, however when I disconnect the cable after copying WM6.5 cant read the folder sometimes.
Othertimes when I connect the phone as Activesync and start to copy some files, it stops half way through, sayign "access is denied". if that happens I cant transfer any files anymore, it will always give same error until some time passes, few disconnections, restarts, no consistency, no definite workaround. The strange is when it gets into this "access is denied" mode I can still browse the device (storage card) and create and delete folders. very-very frustrating.... did a few soft and hard resets, reinstalled activesync couple of times, still no joy...and i dont have any FW app on my device...
thanks.
Alrighty so here is the issue.
I got a new AT&T Fuze and tried to load "RaphaelHardSPL-Unsigned_190_1_3".
1) I load Windows Mobile Device Center
2) Run the aphaelHardSPL-Unsigned_190_1_3 exe
3)THe load bar comes up, HTC screen goes black and then the loader fails at %0.
4) It gives the 262 error
5) I take the battery out, turn on and phone is fine
What is the problem?
Ps...
This on on my Visa 64 sp2
ROM Development Thread
UndertoW said:
Alrighty so here is the issue.
I got a new AT&T Fuze and tried to load "RaphaelHardSPL-Unsigned_190_1_3".
1) I load Windows Mobile Device Center
2) Run the aphaelHardSPL-Unsigned_190_1_3 exe
3)THe load bar comes up, HTC screen goes black and then the loader fails at %0.
4) It gives the 262 error
5) I take the battery out, turn on and phone is fine
What is the problem?
Ps...
This on on my Visa 64 sp2
Click to expand...
Click to collapse
Have you searched in the Raphael ROM Development thread. I believe this is covered in that thread.
I did check the forum and an extensive google search with no useful information found......not that it's not there.....just that i could not locate it.
Any specifics or a link would be much appreciated.
thanks in advance
Rinse and repeat.
I occasionally get a an error when flashing a new ROM, Radio etc. just try again if that fails seek advice from the wiki/appropriate thread.
mcspikesky said:
I occasionally get a an error when flashing a new ROM, Radio etc. just try again if that fails seek advice from the wiki/appropriate thread.
Click to expand...
Click to collapse
I tired it about 4 or five times...all with the same error code.
do you know where i can find these appropriate threads?
thanks in advance
Still looking for some advice help bump
I am having the same problem with the same Vista set-up. I've even tried running the RUU and Windows Mobile Device Center in compatability mode, with no success.
Ok, I just figured it out. do not start the Mobile device center in Vista. Just make sure that the phone shows up as a device under my computer. took about 10 seconds to flash after that. (and I had the sim and sd card removed for good measure).
Thank you very much...i'm now up and running 4.5 and love it.
Thank you dkevinscott very much for you time and help!
how to flash my htf fuze.
hi, is anyone can get me a hand to flash my htc fuze, thankyou very much.
I'm still getting this error.... anyone have a work around? I have XP
i had same problem it came down to qualcomm drivers .no workaround for me just used vista
ITT: People who refuse to spend 10 minutes reading for themselves
Same problems
Hi there,
I have a Xperia X1 and i'm trying to upgrade to 6.5 aswell.
Everytime i launch the exe file (Kovsky customRUU) it'll give me a 262 error.
I'm running vista and didn't run mobile center.
The X1 appears in my explorer though.
But still. It's a nogo.
Pls help
HTC Touch Pro, Fuze HardSPL Error 262 FIX
Alright, this is how i fixed my 262 error after ripping out all my hair for a week.
- Plug your phone into any working usb port (make sure Active sync is up and running)
- Run RaphaelHardSPL-Unsigned_190_1_3.exe and on the first screen pop up, 9 files will be created in the directory you run the .exe from.
- Copy these 9 files to another folder because you will be clicking cancel on the pop up which will in turn erase the 9 files it created.
- Click cancel on the pop up.
- Go to the folder in which you copied these 9 files to.
- Run ROMUpdateUtility.exe and the same screen pop will appear as before.
- Follow the prompts and it should work.
i had this exact same error. this worked flawlessly. thanks!
xidesu said:
Alright, this is how i fixed my 262 error after ripping out all my hair for a week.
- Plug your phone into any working usb port (make sure Active sync is up and running)
- Run RaphaelHardSPL-Unsigned_190_1_3.exe and on the first screen pop up, 9 files will be created in the directory you run the .exe from.
- Copy these 9 files to another folder because you will be clicking cancel on the pop up which will in turn erase the 9 files it created.
- Click cancel on the pop up.
- Go to the folder in which you copied these 9 files to.
- Run ROMUpdateUtility.exe and the same screen pop will appear as before.
- Follow the prompts and it should work.
Click to expand...
Click to collapse
work!!
man i spend two days without sucess.this working .thnx
Hi
I posted this in another board but didn't get an answer so I'll try again here (with more details).
I've tried to install TT5 on my Himilaya with esfane's German version WM6.5. After finally finding threads from people with the same problem I tried the solutions there but with no luck. What I've tried so far:
If I try to install the app using the .cab file it gets all the way to the end but then says installtion failed. I still get the today plug-in but it only beeps at me. The Navigator folder is empty.
I extracted the .cab on my PC, renamed the files according to the .ini and copied them to the folder on my PPC - no luck. The .exe just gives an error messge "failed to start". I'm assuming all of the registry entries are missing.
That brings me to the end of what I can do. I know the .cab install works with WM6.1, which is the solution in the wiki but it doesn't work on my device.
I don't want to upgrade because that means buying the software again.
HELP!!!!
Thanks in advance.
[Q] Why Do I get this error "The Parameter is incorrect." Trying to Write to my Phone
I have a brand new Samsung Captivate from Rogers.
I have updated it to 2.2 using kies.
I then did the one click root.
Now when I connect it to my computer I get "The Parameter is incorrect." every time I try to copy a file or make a new directory.
I have formatted the memory from the phone and I can then copy files or make folders temporarily. Until the phone decides that it wants to throw the error again.
I can also run a check disk from my computer with “Automatically Fix system errors" and "scan for and attempt recovery of bad sectors" check. This will also fix the problem temporarily.
So how do I fix the permanently?
This is my first post so please don't flame me to bad.
Thanks in advance.
looks like something wrong in your computer. try to reinstall the usb drivers and switch to another computer to see if it still happens.
I have tried it on my desktop, my laptop and my work desktop.
The problem always reappears.
I am using the driver from the Wiki.
Windows ?????
Windows 7 x64
Parameter is incorrect error:
You need to make sure your drives (SD) are/is formated with FAT32.
This will allow maximum file size of 4Gb.
I have formated fat32 and it has just started getting the error again.
I found this post http://forum.xda-developers.com/archive/index.php/t-907854.html
this is what is happening to me.
Has anyone found a fix?
i had this issue with stock 2.2 rogers.
one time i was able to fix by right clicking the phone in my computer> properties> tools > scan for errors. Found some.
it was also deleting files/songs that i put on the internal sd.
returned the phone. no problem since, but have also been using custom roms since.
This is weird. I had the same problem on an old version of di11igafs rom. It was related to the file vold.fstab which deals with mounting storage. I find it odd that this is happening o a sock rom. If any of you feel so inclined upload your vold.fstab and ill have a look.
HaiKaiDo said:
If any of you feel so inclined upload your vold.fstab and ill have a look.
Click to expand...
Click to collapse
I will upload my vold.fstab if you tell me where to find it.
Sent from my SAMSUNG-SGH-I896 using XDA App
Trusselo said:
returned the phone. no problem since, but have also been using custom roms since.
Click to expand...
Click to collapse
Did you return the phone ti rogers?
Sent from my SAMSUNG-SGH-I896 using XDA App
If you use root explorer or ASTRO (which is free) to navigate to the root directory of your phone, look for the folder named 'etc' inside that folder should be 2 VOLD files. make a copy of these.
PS: MAKE SURE NOT TO MOVE THEM!!! xD (or delete O: )
So I just got off the phone with samsung and they told me to return the phone to rogers because rogers website is giving the wrong firmware.
Now I do not know if this is true but I would like to fix the problem.
They also said that I can not put the correct 2.2 on as kies will see the wrong 2.2 and not install the correct one.
So now I guess I have no choice
I have attached both of the vold files for you to look at.
I hope someone can come up with a fix as Rogers does not want to change the phone. They are waiting on a fix from Samsung and Samsung says there is no fix coming and that I need to change the phone.
Is there a way to go back to 2.1 Rogers?
windburn said:
I hope someone can come up with a fix as Rogers does not want to change the phone. They are waiting on a fix from Samsung and Samsung says there is no fix coming and that I need to change the phone.
Is there a way to go back to 2.1 Rogers?
Click to expand...
Click to collapse
use odin 1.7 with
http://dl.dropbox.com/u/19201431/SGH-I896_UXJI2StockRogers2.1.zip
to get back to 2.1 rogers. use the PIT file and RE-Partition. i have been flashing phoenix roms with no problem.
i only had those error problems with stock 2.2 after updating, but to be honest only had the phone less than 1 week between 2.1> 2.2>custom> returned to store. the second phone was on phoenix within 2 hours of getting it.