Related
Hey guys..
Well i want to star by saying this site is asome and alot of helpul information..
Thank you to those who work hard to help others...
Well let me start by explaning a lil of my problem that im having with this phone..
I happen to love this phone just hate the Rom that cingular or HTC has for it.. Well i have a BMW that comes with bluetooth and it shows the calls on my car screen but i know its a 100% issue with the phone that i can't access my contact to the car.. I try every other phone infact also a friend has a PDA with tmobile and that works fine.. But my Cingular 8125 just acts stupid in my car.. I when ahead and follow the intruction for the update of the rom that is posted here for the phone.. I when ahead and unlock it.. It work ok... Then i upgarded to the custom AKU 2.3 ROM which also install good.. My question is? It is the current rom version there is that has been made or there is a better one? the reason for my question cause i see that when i check the device info i see the rom itself didn't change much and its still giving me a problem with the bluetooth on my car ..
I have this as follows:
Rom Ver. 1.5.4.2 WWE
Rom Date: 11/8/05
radio ver. 02.25.11
protocol ver. 4.1.13.12
extrom ver. 2.25.11.102
Please anyone can help me.. i would be truely greaful for the help.. I been working on this for days and can't harly sleep anymore trying to fix this problem...
Also wondering why my shows the Rom Ver 1.5.4.2 when i just did the AKU 2.3 which shows the rom /radio etc should look like this:
2.25.11.1 WWE
5/11/06
RADIO 02.25.11
PROTOCOL 4.1.13.12
Ext ROM 2.25.11.102
You need to CID unlock before you try to upgrade.
Your phone is not CID unlocked.
Its there a way to confirm if its unlock or lock becuase I even have the unlock files and the lock files the software makes before doing the unlock and it rebooted phone and it said that was the confermation that the phonone would be unlock..
Well here another thing, I just took my parents Tmobile phone and put there sim card on my phone it it works.. It won't work before when it was lock..
I beleive that means its unlock.. Unless if there is another lock your speaking off and im not sure.. Im sorta new to the whole cell phone thing..
Ok it looks like i have a bit of a problem..
As per the dirrections it looks like everything thing when well with the unlocking.. The phone is unlock when i used a Tmobil Sim Card it works ...
But when i try to load the rom To 2.5.11.1
but it looks like it just gives me the 1.5.4.2 wwe then i did it again .. It tells me congratulations the phone is ready to used..
when i check the ROm ver is still the same as before..
lanceny, the SIM unlock and CID are two different unlocks. You must CID unlock to change ROM. SIM unlocks allow you use other SIM cards. CID unlock will allow you to upload different ROM.
This is the code from lokiwiz:
Code:
C:\Documents and Settings\MengesB\Desktop\New Folder>Lokiwiz.bat
machinagod's HTC Wizard Unlocker v0.2
NOW WITH CID Unlocking POWER!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
U. Unlock
L. Lock
C. CID Unlock (SuperCID)
Q. Quit
--------------------
Type the letter and press Enter: U
Unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
Copying C:\Documents and Settings\MengesB\Desktop\New Folder\Utils\itsutils.dll
to WCE:\windows\itsutils.dll
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
g=78: 0043bbc5 - 9519c7a3459aaf60
Key idx: 78
olddata: cf30320b42870681Unlocking... newdata: dee342037c9d3bd3
newsum=4a89850e encsum=add2675de7343d5d
DONE.
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
CopyFileToTFFS(unlocked.bin:0, 0, 00010000)
result=80072746
Your phone is now unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
ECHO is off.
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
C:\Documents and Settings\MengesB\Desktop\New Folder>Lokiwiz.bat
machinagod's HTC Wizard Unlocker v0.2
NOW WITH CID Unlocking POWER!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
U. Unlock
L. Lock
C. CID Unlock (SuperCID)
Q. Quit
--------------------
Type the letter and press Enter: C
CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
g=78: 4a89850e - add2675de7343d5d
Key idx: 78
olddata: 5a59d28bc2764cc8460f100469464259621e8365aeb43277cf2858b925828379
newdata: 95ea23df0bf16432cf7be60912a5cbdedee342037c9d3bd3dee342037c9d3bd3
newsum=30bee074 encsum=b2a1355d0d25fe1c
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
result=80072746
Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
ECHO is off.
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
The top portion of the copy/paste shows the SIM unlock, notice the input. The SECOND portion (lower half) is a CID unlock. To update the ROM on a Cingular 8125, which is CID locked, you will have to unlock the CID, for my particular version it was C for CID unlock. Please note - this will VOID your warranty - so do so at your own risk.
lanceny said:
Hey guys..
Well i want to star by saying this site is asome and alot of helpul information..
Thank you to those who work hard to help others...
Well let me start by explaning a lil of my problem that im having with this phone..
I happen to love this phone just hate the Rom that cingular or HTC has for it.. Well i have a BMW that comes with bluetooth and it shows the calls on my car screen but i know its a 100% issue with the phone that i can't access my contact to the car.. I try every other phone infact also a friend has a PDA with tmobile and that works fine.. But my Cingular 8125 just acts stupid in my car.. I when ahead and follow the intruction for the update of the rom that is posted here for the phone.. I when ahead and unlock it.. It work ok... Then i upgarded to the custom AKU 2.3 ROM which also install good.. My question is? It is the current rom version there is that has been made or there is a better one? the reason for my question cause i see that when i check the device info i see the rom itself didn't change much and its still giving me a problem with the bluetooth on my car ..
I have this as follows:
Rom Ver. 1.5.4.2 WWE
Rom Date: 11/8/05
radio ver. 02.25.11
protocol ver. 4.1.13.12
extrom ver. 2.25.11.102
Please anyone can help me.. i would be truely greaful for the help.. I been working on this for days and can't harly sleep anymore trying to fix this problem...
Also wondering why my shows the Rom Ver 1.5.4.2 when i just did the AKU 2.3 which shows the rom /radio etc should look like this:
2.25.11.1 WWE
5/11/06
RADIO 02.25.11
PROTOCOL 4.1.13.12
Ext ROM 2.25.11.102
Click to expand...
Click to collapse
What problem are you having with the BMW car kit and your phone?
The Issue I have is that you cant scroll through the contacts with the steering wheel.
So far the only fix I have found is from www.jetwaremobile.com. After installing that I can now scroll through my contacts. When somoene calls me it shows the caller ID on the screen but it doesnt work perfectly. When someone calls me I get *me lastname meaning I get the * and a few letters of the first name then I get the full last name. I havent figured out why that has happened but at least I can make outgoing calls with the steering wheel.
Hope that helps.
I can't view the contact at all...
the phone doesn't let the car pick up my contact list...
saids contact empty.
i just updated the ROm i will let you know later today if it work or not..
with the contact
Also mengesb thank you so much that was the problem.. I fell so stupid cause i thought it was only one lock and i had done it.. I guess i was wrong and i thank you so much..
On Guys thank you all for all the help..
The new Rom its working ok...
The Problem that i first thought it would get fix with the new rom 2.25.11.1 WWE i thought it would fix on issue with the bluetooth, Well it did Not ... Still having a problem with my Cingular 8125 and getting the phone book to Syn with my BMW Bluetooth system..
For some reason the Car trys to pull the Phone Book but it still shows on the screen of the car Phone Book Empty.. Not sure what else to do and not sure if Rom 2.25.11.1 WWE is the latest there is.. If anyone knows of any newer one that may fix this issue please let me know.
And to answer the previest question.. With the issue of the stearing weel button, it doesn't work as well with me.. My caller id on the screen of the car shows the number doesn't show any name. Maybe thats because the phone book won't show out in the car to show the name that is associated witht he phone book number..
Please anyone can help me...
DavidT. said:
lanceny, the SIM unlock and CID are two different unlocks. You must CID unlock to change ROM. SIM unlocks allow you use other SIM cards. CID unlock will allow you to upload different ROM.
Click to expand...
Click to collapse
HEHEHEHE...
Thank you, that was the problem..
lanceny said:
On Guys thank you all for all the help..
The new Rom its working ok...
The Problem that i first thought it would get fix with the new rom 2.25.11.1 WWE i thought it would fix on issue with the bluetooth, Well it did Not ... Still having a problem with my Cingular 8125 and getting the phone book to Syn with my BMW Bluetooth system..
For some reason the Car trys to pull the Phone Book but it still shows on the screen of the car Phone Book Empty.. Not sure what else to do and not sure if Rom 2.25.11.1 WWE is the latest there is.. If anyone knows of any newer one that may fix this issue please let me know.
And to answer the previest question.. With the issue of the stearing weel button, it doesn't work as well with me.. My caller id on the screen of the car shows the number doesn't show any name. Maybe thats because the phone book won't show out in the car to show the name that is associated witht he phone book number..
Please anyone can help me...
Click to expand...
Click to collapse
Sorry to be a pain but does anyone, know any bluettoth fix for the Cingular 8125 as im still having the same problem from when i stared thinking that the new Rom would fix but it didn't?
I even try the http://www.mountainwings.com software but the contact list will Not pull on my Car Bluetooth.
lanceny said:
lanceny said:
On Guys thank you all for all the help..
The new Rom its working ok...
The Problem that i first thought it would get fix with the new rom 2.25.11.1 WWE i thought it would fix on issue with the bluetooth, Well it did Not ... Still having a problem with my Cingular 8125 and getting the phone book to Syn with my BMW Bluetooth system..
For some reason the Car trys to pull the Phone Book but it still shows on the screen of the car Phone Book Empty.. Not sure what else to do and not sure if Rom 2.25.11.1 WWE is the latest there is.. If anyone knows of any newer one that may fix this issue please let me know.
And to answer the previest question.. With the issue of the stearing weel button, it doesn't work as well with me.. My caller id on the screen of the car shows the number doesn't show any name. Maybe thats because the phone book won't show out in the car to show the name that is associated witht he phone book number..
Please anyone can help me...
Click to expand...
Click to collapse
Sorry to be a pain but does anyone, know any bluettoth fix for the Cingular 8125 as im still having the same problem from when i stared thinking that the new Rom would fix but it didn't?
I even try the http://www.mountainwings.com software but the contact list will Not pull on my Car Bluetooth.
Click to expand...
Click to collapse
WTF is mountainwings.com??? its some religious stuff...what that gotta do with 8125? You lookin for Jesus to save your phone???
That would be funny if the mountainwings people hadn't put Bush in the White House. Instead it's scary.
redrover said:
lanceny said:
lanceny said:
On Guys thank you all for all the help..
The new Rom its working ok...
The Problem that i first thought it would get fix with the new rom 2.25.11.1 WWE i thought it would fix on issue with the bluetooth, Well it did Not ... Still having a problem with my Cingular 8125 and getting the phone book to Syn with my BMW Bluetooth system..
For some reason the Car trys to pull the Phone Book but it still shows on the screen of the car Phone Book Empty.. Not sure what else to do and not sure if Rom 2.25.11.1 WWE is the latest there is.. If anyone knows of any newer one that may fix this issue please let me know.
And to answer the previest question.. With the issue of the stearing weel button, it doesn't work as well with me.. My caller id on the screen of the car shows the number doesn't show any name. Maybe thats because the phone book won't show out in the car to show the name that is associated witht he phone book number..
Please anyone can help me...
Click to expand...
Click to collapse
Sorry to be a pain but does anyone, know any bluettoth fix for the Cingular 8125 as im still having the same problem from when i stared thinking that the new Rom would fix but it didn't?
I even try the http://www.mountainwings.com software but the contact list will Not pull on my Car Bluetooth.
Click to expand...
Click to collapse
WTF is mountainwings.com??? its some religious stuff...what that gotta do with 8125? You lookin for Jesus to save your phone???
Click to expand...
Click to collapse
LOL, guess i am.. I happen to love the phone but not working well at all.. I will get rid of it and get me a razor its a pain now.. and it does me no good to spend 800.00 on the BMW bluetooth and the stupid phone doesn't work..
I wish i can back charge Cingular but there sheap as hell....
I told you how to get the BT working in the Bimmer...see below!!! I just quoted myself...
What problem are you having with the BMW car kit and your phone?
The Issue I have is that you cant scroll through the contacts with the steering wheel.
So far the only fix I have found is from www.jetwaremobile.com. After installing that I can now scroll through my contacts. When somoene calls me it shows the caller ID on the screen but it doesnt work perfectly. When someone calls me I get *me lastname meaning I get the * and a few letters of the first name then I get the full last name. I havent figured out why that has happened but at least I can make outgoing calls with the steering wheel.
Hope that helps.
redrover said:
When someone calls me I get *me lastname meaning I get the * and a few letters of the first name then I get the full last name. I havent figured out why that has happened.
Click to expand...
Click to collapse
Hey Red,
I don't use Beemer BT but I've skimmed the site you posted and just have a thought (probably nothing but what the hey).
If you are using any filters to determine what contacts are synced with your car BT make sure you don't have a typo in any of the fields..
kyphur said:
redrover said:
When someone calls me I get *me lastname meaning I get the * and a few letters of the first name then I get the full last name. I havent figured out why that has happened.
Click to expand...
Click to collapse
Hey Red,
I don't use Beemer BT but I've skimmed the site you posted and just have a thought (probably nothing but what the hey).
If you are using any filters to determine what contacts are synced with your car BT make sure you don't have a typo in any of the fields..
Click to expand...
Click to collapse
Thanks for the input but what typos would you mean? All of my contacts are displayed like that when someone calls me. Maybe its an outlook thing as my contacts are listed in outlook lastname, first and that is how they are displayed on the phone. I did change them to first name last and I get the same result.
Suggestiions?
Thansk
redrover said:
I told you how to get the BT working in the Bimmer...see below!!! I just quoted myself...
What problem are you having with the BMW car kit and your phone?
The Issue I have is that you cant scroll through the contacts with the steering wheel.
So far the only fix I have found is from www.jetwaremobile.com. After installing that I can now scroll through my contacts. When somoene calls me it shows the caller ID on the screen but it doesnt work perfectly. When someone calls me I get *me lastname meaning I get the * and a few letters of the first name then I get the full last name. I havent figured out why that has happened but at least I can make outgoing calls with the steering wheel.
Hope that helps.
Click to expand...
Click to collapse
Yes, I done just that...
The software jetwaremobile doesn't make it work as well..
Ok the main problem i have on the BMW is that the Bluettoth doesn't allow the contact to work on the BMW screen. I can Pair with the car and all.. I can receive and make calls just find.. But i have to make the calls from the phone itself.. Because when i used the car phonebook then it tells me its empty when i have 382 contacts on the phone.. as you may know it trys to save on the phone memory not in the Sim card.. BUt not sure if thats the causing the problem. But since i install the jetwaremobile software when i click on phonebook on the BMW screen it tells me Please wait and i let it 30 minutes or more and then just freezes the whole phone part of the system.. I have to go to the back and reset the system otherwise the phone will not work again.. I try to do this numerious amount of times.. I also try to send contact one by one on pairing mode but freezes as well. I try other phones and they work in about 30 secound the contact its on the screen..
I don't mean to sound like i don't know what im doing but i know im doing it right atleast to the intructions from here hehehe
Let me know if you know any other way.. I'll try to take picture of it and post them ok.. If its ok with you...
You can post pix if you like...
you can do 1 of 2 things...
post on
http://www.bimmerboard.com/forums/bluetooth/
That is the BMW Bluetooth forum board.
you can also look on
http://bimmernav.com/
You can look there too...Im sure you can call Martin at Bimmernav as well he may be able to help. Those 2 places are a start as well.
redrover said:
You can post pix if you like...
you can do 1 of 2 things...
post on
http://www.bimmerboard.com/forums/bluetooth/
That is the BMW Bluetooth forum board.
you can also look on
http://bimmernav.com/
You can look there too...Im sure you can call Martin at Bimmernav as well he may be able to help. Those 2 places are a start as well.
Click to expand...
Click to collapse
Yeah i check there forum because i purchase the bluetooth from them and i can't post on there forum it tells me i have no confirm the email but it never sends me one and i email martin his is who i purchase the device from but there on vacation and he never answer my last email.. his answer others..
I have added a picture.
Hi
Tried looking through all the threads and checking what I have done but still no joy hence post.
Have upgraded my old BA PH20B (I have another one so no panic) to WM5 with the latest WM2k5_AKU3.2_32mb_v1.3.2 setting Operator to ORANG001 (Orange UK).
1st time I tried everything seemed fine except although I had a signal from Orange I couldnt ring the phone (went to answer machine) and if I tried calling out the call disconnected with 0min 0sec calltime. I did receive a text message saying I had missed a call (me calling phone to test). But couldn't make or receive calls.
So I tried again from scratch twice and both times I have no signal and in Device Info have "Radio version: NONE" - followed instructions to the letter anyone any ideas?
Cheers
RichardC
ps. I can re-flash ROM OK.
this happened to me, too. but only when i changed batteries...
try to soft reset until the word NONE is replaced by the radio rom version (during boot up).
good luck!
Thanks for that, did soft reset and suddenly I have a radio ROM, so removed battery and inserted SIM then no radio again. Soft reset and radio back...weird
Now I can make calls and receive text but can't call phone (engaged or answerphone, maybe network I guess) but also GPRS connection info wrong so guess better start searching for info on that now. lol.
Thanks for the tip.
Check out my signature - use the links provided.
_TB_TB_ said:
Check out my signature - use the links provided.
Click to expand...
Click to collapse
Makes sense thanks...just the GPRS issue now. lol
Just stepped through GPRS settings not changing anything but clicked OK at the end and it works now. Looks like install didnt configure everything fully.
Weird issue I now have is dialling out cancels and yet the phone I dialled rings about 10 seconds later (very weird).
When receiving a call - nothing happens on the BA, no ringing down phone calling out from then when the network drops the call the BA makes a small burp sound. So it knows it should be ringing but something is stopping it.
Tried upgrade to 1.15 Radio ROM - same. So now going to try downgrade to original WM2003SE Radio ROM version (1.06) and see how that goes unless someone has another bright idea?
same issue here
I am now experiencing the same issue, suspect its battery related though...hope someone can come up with something better than that. :lol:
_TB_TB_ said:
Check out my signature - use the links provided.
Click to expand...
Click to collapse
You'll need to update those links for the new forum it seems.
Tried everything but although it all worked phone usage was inconsistant. Sometimes calling out works, sometimes just drops call with duration 00:00. Sometimes receives a call, other times goes straight to voice mail or un-obtainable tone even when signal fine and 2nd BA running WM2003SE works fine (same operator, Orange UK). Bluetooth also needed re-boot most of the time to be enabled. So reverted to WM2003SE for now .
just for comparison i have an xda iis that works fine phone and all and im in wm2k5......except cam doesnt work lol gunna fix taht later .....i used radio version 12.00
hirsty said:
just for comparison i have an xda iis that works fine phone and all and im in wm2k5......except cam doesnt work lol gunna fix taht later .....i used radio version 12.00
Click to expand...
Click to collapse
Thanks for that I tried 12 and then finally went back to standard WM2003SE radio version out of desperation. Nothing worked.
When I have the energy! I may try upgrading my other (newer) BA to see if that helps but first I need to backup my current ROMS as it works faultlessly under WM2003SE...why am I thinking of upgrading I ask myself
Alhumdulillah
everything is working fine for me
AKU 3.2 owns
CAM is fine
ricardo there must be some other problem i hope u didnt drop the phone too many times
looks more like a hardware problem to me
Hi
Phone is 100% OK with WM2003SE, so not a hardware issue...may try again soon, thanks for input.
Guys
I have been using shoguns rom for while now and keep checking for a final one..
However since this rom i have seen threads about 3.2 and all the gods shogun,molski,DrP ,faria,risidoro are working on roms and i am totally confused.
But its beenok as i know eventually i will read a thread saying " this rom is fantastic and works on my G4" then i can just use that one.
Problem is since yesterday my perfect shogun machine has been playing up.
I didnt receive a txt all day assumed that all my friends have deserted me.
But whats happening is that my txts are not getting thru.
after testing I have worked out that if someone sends a txt then my phone lights up but nothing arrives.
If i remove my 2gb then txts get through as normal
If i remove my 2gb al ong time after someone sends the txt then they get lost in the ether .
What ever the issue is ( installed skype and agile the day before and now removed them again) i need a working phone.
I am expecting a text from sandra bullock saying she cant stand to be without me and wants to have my babies, and i really dont want to miss that txt
anyone with knowledge of this problem ?
or anyone using the latest roms with G4 ( locked)?
help would be appreciated.
Also
How far overclocked is your G4? The tmail.exe app has known problems with overclocking corrupting the mailstore. In my case I get notified of mail sometimes and then when I go to look at it, there's no mail there.
Im set t 240. just tried downing it to 162 and reseting etc but no change.
I think short of a new G4 rom I need to reset , wipe my 2gb and reinstall the apps one by one.
~Damn
I was really hoping for good new rom to be here by now.
bhayani
after lots of searching i have sorted it. i deleted the inbox folder on the 2gb and it all works again. damnn!. i went to tell my brother and he said " yeah i did that last week. sorted it out straight away arghhhhhh.
bhayani
Hey everyone ..
i was using my Blueangel normaly and so happy with it until i faced this problem before 2 days ..
I was texting my gf while i was out and kept on even though the battry gave me a warrny that its really low .. i ignored and kept SMS's her until it went off.
i went home charged my device but its not connecting to the network. it shows either "No Service" (where it shows X beside the signal tower) or "Searching" (where it shows ! beside the signal tower).
Please anyone knows how to turn it on im really in a bad situation here.
Note: just to let you know im using WM5 Hemi's rom and upgraded it today to Xplode's rom just hoping it would help.
Well when i tried another sim on my blueangel it worked and my sim card on another mobile it worked also. im really losing my brain
44 views no one have a slight idea..
anyways thanks alot everyone for visiting
Hi,
All I can suggest is to re-install radio rom! prob 1.15.
If not that then ensure flight mode is NOT active, and battery's fully charged
Also when you reset BA, on first screen does the R show a none?
If so reset, twice, its a common problem with BA and WM5, it isn't able to intialise the radio rom before WM5 boots.
It seems wierd that another sim worked on your BA, must be a faulty/damaged sim.
I also note you've tried the non-working sim on another phone and that works! Wierd that too!
Hope that helps,
Sunny
Have you tried to manually select the network in the "Phone" settings screen? I've heard of similiar problems being fixed by that.
well after i asked here and there and got disappointed with I-Mate people.. they know nothing at all
an IT in my company told me the problem is with my sim card. its damaged cause of the change in the battry power (as he says) it damaged the frequency that my mobile use to read the sim so there for it would work on any mobile except mine.
so i would change the sim but it needs me ages to get free and do that.
THANKS ALOT TO EVERYONE ATLEAST READ MY THREAD OR TRIED TO HELP
YOU GUYS HERE ARE THE BEST
By the way
sunny: the Radio is already 1.15 from ages. but thanks alot for trying to help me.
Fraser: I tried to manualy select the network but it says there is no network which is funny cause there is 4 networks in my area.. actuly im working with the same operator so im inside the tower LOL. the signal streth is the best here.
Thanks alot mates
No problem!
Thats what we're here for!
Regards
Same problem
I once had the same problem. Now I'm no genius when it comes to these phones and it actually took me a whole week to get an idea of what the hell happened to my phone. Basically, these phones are Quad Band (GSM 850/900/1800/1900) and for some reason after I upgraded I lost my signal. I found a little application that let me reselect my band (its not built into windows for some reason) and that solved my problem. I just selected "Auto select" and the problem was solved after a soft reset.
Now, I can not remember what that application was but maybe that can give you an idea of what to search for.
No Service issue
sunnyd24 said:
Hi,
.......
Also when you reset BA, on first screen does the R show a none?
If so reset, twice, its a common problem with BA and WM5, it isn't able to intialise the radio rom before WM5 boots.
...........
Hope that helps,
Sunny
Click to expand...
Click to collapse
Hi, is there more 'democratic' way to resolve this issue than reseting BA twice?
After installation of xplode's R4 for noobs an old version of R 1.06 was left on BA. Thinking that this was a reason for No Service of the phone I dumped latest R , but double f..reseting necessity still persists ...
Is that a normal thing to reset twice such an advanced device when you want even just to call smbdy? Thanks
there is a lil bug in my roms, after totally draining both bateries when you power it on it says NONE for radio you have to soft reset it again in order to work. I have never had a band selection problem but it is possible reason for this
xplode said:
there is a lil bug in my roms, after totally draining both bateries when you power it on it says NONE for radio you have to soft reset it again in order to work. I have never had a band selection problem but it is possible reason for this
Click to expand...
Click to collapse
Hi hi there! First of all please accept my deepest appreciation for such a great work you have done to make us - PPC ordinary users - little bit more happy Just one small note - is it possible to upgrade your downlodable R4 file with all necessary ROMs - Radio, etc., etc. With the intention that every Noob trying to upgrade his/her BA, should do it in a push of one button - not searching for separate latest ROMs and HowTo instructions? Thanks for your time!
P.s. Sorry it seems came out little bit off topic....
well it is possible but i have no time to do it. or you can try to copy the radio nbf file into the folder of the nk.nbf and run the upgrade utility
Any solution on this matter ? I am using Helmi MW6 ROM with radio 1.15.00 and i'm having the same problem.
I've searched the forum but found no solution yet.
JP
Hello again, I have this big problem with my Kaiser :
since I installed the last HTC 6.1 ROM update, my device randomly freezes for 10-20 seconds.
I also noticed that my devices sometimes slow down ...
Does anyone else have this problem ?
The solution : Downgrade to WM6 !
I think I've found where the problem is :
since I stopped using "Quick Menu", the Kaiser does not freeze anymore ...
That means this is another usefull application I will have to stop using with the HTC 6.1 ROM !!!
Sorry but I don't know what is Quick menu...
vertpoulpe said:
Sorry but I don't know what is Quick menu...
Click to expand...
Click to collapse
If you don't know it, that means you didn't install it on your Kaiser. So your freeze problems were not coming from this application. Sorry ...
The biggest bug i've been with wm6.1 : my kaiser soft reset alone all the time ! Maybe they're drunk when they're built this rom lol ! They should have write : THE MAGIC FUNNY WM6.1 RELEASE WITH GHOST TOUCH !
I disabled Weather tab and contacts tab with HTC home customizer. It seems to work well now. I will see if problem has really gone. Thank you for your help Dizzy. You gave a direction to my searchs
You're welcome ... But I use HTC home mainly for its contact and weather application ... So it's not a solution for me.
I noticed that orange france users had problems. Perhaps it is linked with our SIM CARD...
do you really need to post two threads on this?
I thought about using HTC's rom, but instead, i used dutty's lite rom, and built it up myself with what i wanted. Its a hell of a,lot faster, i wouldnt touch another oem htc rom ever again, they are full of rubbish, and slow as my old wizard
Finally I discovered that the problem didn't come from "Quick Menu", but from "HTC home" !!!!!
HTC home does slown down my Kaiser and is responsible for randoms freezes of it !
If I disable "HTC home" on the today setup screen, then everything is faster (start menu display ...).
I re-installed Quick-menu and now my Kaiser is working fine.
I will have to replace HTC home by a clone application ...
I haven't had any issues with my Kaiser freezing with the 3.28.405.0 WWE ROM, but then I haven't used ROM that was oficially released by HTC. Instead I've been using the one that was leaked out a couple of days before the official release.
Is it possible that the official ROM image is corrupted in some way? I've noticed this post over in the Kaiser ROM Development forum, which was posted today:
http://forum.xda-developers.com/showpost.php?p=2234850&postcount=356
grusy said:
Called HTC today.
I'm not the only one having trouble with 6.1. They said in the next two days there will be a "new" version available.
The file we could download now is corrupt and they will upload a non corrupt version. Supposedly the file was corrupt by uploading to ftp server
I think they will release a patched version.
Click to expand...
Click to collapse
I've installed the official (English) rom I got from someone in the UK (there is none for TYTN II from Hong Kong being used in the USA as of yet ) and loved the idea that all I had to do is just install ( No hard SPL ) and everything seems fine. I have a lot of apps. installed and everything is fine.
I upgraded to the leaked ROM and have had nothing but Freezing problems !!
I turned off HTC home and this seemed to do the job...for about 12 hours and then wouldnt you know it, its slow again.
I did a hard reset and turned everything off, used Kaiser tweaks to change the cache options and its still not right.
I feel badly let down by this product. I upgraded from a blackberry 8800 which ran like a dream, no problems. I've always been alittle sceptical about Windows Mobile Products. I've owned many PDAs in the past and have always felt that they were always compromised. My Dell Axim X51v was a good PDA but too bulky to carry around. I've always been someone who wasnt bothered by Windows Mobile Devices because of their windows hang ups. Seems I was proved right, though I know this isnt necessarily a Windows thing, more likely a HTC thing....it still doesnt help !
I needed a product that offered, office apps, with internet and the ability to FTP easily at high speeds either over WiFi or 3g. The Vario III had the lot including imense flexability which made me give up my Blackberry (which was a big thing, trust me as I adored my blackberry,,,it was just alittle limited).
After having purchased HTC's almost flagship model I've feel totally let down, they knowingly shipped a product that was flawed and then released a dodgy fix that affectively made the device worse (for some of us!). Freezing all the time. When it wasnt freezing it was a pleasure to use...but seriously, i'm 5 weeks into using it and I'm absolutely pee'd off. I seem to be constantly looking for fixes all the time !! my wife thinks I've become bloody addicted to it, she wont listen when i tell her I'm trying to fix it. it always seems to be in my hand !! (the kaiser that is )
That blackberry of mine is going to be taken out of the box and this paper weight will be used as just that.
gutted man
Ste
You need to remove the HardSPL application from your Kaiser in order to stop the freezes ... Take a look at this thread :
http://forum.xda-developers.com/showthread.php?t=394783
It works ... Guaranteed !
Yes, the HardSPL is your problem, not HTC.
I tried the official htc e-club 6.1 and had lots of freezing issues. It would just freez for 20 seconds or so then start working again. Drove me crazy. I off-loaded it and re-loaded dutty's 6.1 hybrid and am very happy with it. Very stable, no more freezes either. I also reloaded mobile shell and found it to work much better than with the old 6.0. The memory issues, leaks etc. I had with shell on 6.0 seem to have become almost non-existant with this rom. And did I say batt life is heaven . I'm stickin' with what works for now.
I have the problem that Activesync is automatically turned on when I start the phone and it makes alot of problems but when I turn it off it usually solves it - anyone know how to fix this?
cbreze said:
I tried the official htc e-club 6.1 and had lots of freezing issues. It would just freez for 20 seconds or so then start working again. Drove me crazy. I off-loaded it and re-loaded dutty's 6.1 hybrid and am very happy with it. Very stable, no more freezes either. I also reloaded mobile shell and found it to work much better than with the old 6.0. The memory issues, leaks etc. I had with shell on 6.0 seem to have become almost non-existant with this rom. And did I say batt life is heaven . I'm stickin' with what works for now.
Click to expand...
Click to collapse
I have the e-club 6.1 and am experiencing the same freezes. Really annoying. I think there is a pattern that when I turn off the phone, the freezes go away.
Foxhunter123 said:
I have the problem that Activesync is automatically turned on when I start the phone and it makes alot of problems but when I turn it off it usually solves it - anyone know how to fix this?
Click to expand...
Click to collapse
I had a similar issue where Activesync would start running on my phone every so many minutes, when looking in the task manager it would be running. I fixed that by running task manager v2.8 from Fdcsoft you can download it from here http://www.dotfred.net/TaskMgr.htm with that go to notification and disable replog.exe (AppRunAfterTimeChange). This does not affect active sync working when connecting to a pc or with push email.