Related
Wondering if anyone can help,
I have an 8125 which I CID unlcoked and SIM unlocked and upgarded to the latest official Cingular ROM.
I then downgraded back to the original shipping rom and RE-CID unlocked the phone.
Then I loaded the 2.26 T-mo ROM and the phone just hung at the splash screen.
So I went into the bootloader (camera held Down) and reloaded the factory ship 1.8 ROM and now it's hanging on that splash screen.
Can anyone offer any help? Reply, PM, e-mail [email protected]HING to help!
Thanks in advance!
Marc
You can try to install my 2.26.10.2 Rom from www.molski.biz
Regards,
Molski
Molski rom didn't work
Molski,
Tried your rom, loaded, but now I'm hanging on your splash screen.
I did also try a hard reset and I get the format failed.
Anyone else got any ideas. Can't find a ROM that will get past the splash....
Marc
I'd downgrade to the 1.05 and take it from there.
Still dead..
I've tried a number of roms.. Buttons 1.05 custom rom, that didn't work, and the one being the K-jam K-JAM_WWE_1010903_106_10110_ship.exe from the XDA ftp site.
I'm still hanging on the splash with the following data:
IPL 1.01
SPL 1.06
GSM 01.01.10
OS 1.1.9.3
And a hard reset still gives a format is failed.
Any more ideas? Please?
Thanks a ton
Marc
Need SD image
Ok...none of the RRUs seem to work, so I'm desperate to try the SD card path, I downloaded the image on the FTP server, but when I load it onto the CD card with NTRW I get the "parameter is incorrect" message. I've ignored it like poeople say.
I Insert the SD card, get to the bootloader, but get no indication that it sees the rom image on the card, I've done it with and without USB.
Can anyone offer some direction, I've read many a post out there, but can't seem to figure out where i'm going wrong. Perhaps someone has an SD backup image they could FTP to me, I have an FTP server avaialble.
Again, thanks for your help,
Marc
UnBricked
While I didn't get much response, I still want to thank the group as reading about 100 posts and taking bits and pieces saved my bacon. I did a successful SD backup of an 8125 with my laptop at a Cingular store...very cool reps and reloaded it on my brick.
If anyone needs an SD backup image of the Shipping 8125 ROM or the 2.25, let me know and I'll FTP it to you.
Thanks,
Marc
mlampcov
I need sd buckup. Now my wizard hung at splash screeen, only way to revive it is the sd backup.
Please tell me where to find the sd-backup.
Ok...
awhile back, I updated my MDA with hacked ROM that made bluetooth better (bluetooth 1.2 i think). anyway, i had no problems with loading new ROM. IPL is 2.17
now, i want to update to newer ROM. as instructed, i downloaded new Tmobile ROM 2.26 and tried to update my MDA.
during the install, i get an error saying my nbk file is corrupt and cannot proceed. so i have the tri color screen and i have to reload ROM 2.17. so my problem is that i cannot update to a newer ROM without fixing the nbk files that are corrupt.
anyone have any ideas on this??? i need help please....
tia,
mike
Read and follow:
http://forum.xda-developers.com/showthread.php?t=298613
Just do everything it says and you will be fine... This will point you to the links you need
thanks...i have some more questions
1) i currently have a full backup of my stuff. if i reload the backup, will it interfere with my new ROM?
2) can you point me to where i can find wm6?
again, thanks for your help....
-mike
1). Yes it will interfere with your new ROM.. not stable anymore
2). Just search around and you'll find plenty.. trust me
ok...went thru the procedures and i am now dead...
not dead really but my mda works but it at Button 1.05 ROM. i cannot write a new ROM...everytime I try, my phone powers off...no tricolor screen.
my IPL is 2.17 and my SPL is 1.01.000
i was trying to get IPL and SPL to 1.XX in order to write Tmobile 2.26 ROM.
anyone, please help!! does anyone know how to manually get to the tricolor screen?
thanks,
mike
Reset while holding the camera button
does anyone know why my imate kjame would give an error or Windows/autoconfig.exe doesnt exist.
i have tried a number or roms but the phone failed to upgrade to wm6. it then reverts back to the wm5 after encounting this error.
i have tried the CID unlock but there is no hope
can anyone please assist me urgently.
ghumanfly said:
does anyone know why my imate kjame would give an error or Windows/autoconfig.exe doesnt exist.
i have tried a number or roms but the phone failed to upgrade to wm6. it then reverts back to the wm5 after encounting this error.
i have tried the CID unlock but there is no hope
can anyone please assist me urgently.
Click to expand...
Click to collapse
We need more information than this if you want help...
1. Wireless Carrier?
2. IPL/SPL?
3. Roms tried?
4. How have you been trying to flash roms? What method of flashing?
5. What is your PC's operating system(your computer, not PPC)
EDIT>> Answer these questions for me and I will try my best to help you tomorrow some time. I live in Cental US so I might not get your messages until later tomorrow your time but I will respond in the morning tomorrow.
info
forgive me if there is anything that i dont get correct....
1. Wireless Carrier?
i am assuming that this is the service provider and that is vodacome for me. it is a not the same as vodafone however they have a JV running
2. IPL/SPL?
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
3. Roms tried?
i tried one of the ROMs that my IT team provided to me. i have attached the rom.
i also tried Octvio's rom (ROM_Wizard_OCTAIVOI_OS_1908_v4[1].8_PP6MB)
i also tried CB-AIRAF
4. How have you been trying to flash roms? What method of flashing?
here i loaded the EnableRapi cab file and ran it on my wizard. then i ran the lokiwiz.bat file on my machine. i didnt see any error there so i take it that it ran fine.
5. What is your PC's operating system(your computer, not PPC)
i am running XP SP2 on my notebook.
couldnt attach any of the files... not sure what was causing the problem
ghumanfly said:
forgive me if there is anything that i dont get correct....
1. Wireless Carrier?
i am assuming that this is the service provider and that is vodacome for me. it is a not the same as vodafone however they have a JV running
2. IPL/SPL?
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
3. Roms tried?
i tried one of the ROMs that my IT team provided to me. i have attached the rom.
i also tried Octvio's rom (ROM_Wizard_OCTAIVOI_OS_1908_v4[1].8_PP6MB)
i also tried CB-AIRAF
4. How have you been trying to flash roms? What method of flashing?
here i loaded the EnableRapi cab file and ran it on my wizard. then i ran the lokiwiz.bat file on my machine. i didnt see any error there so i take it that it ran fine.
5. What is your PC's operating system(your computer, not PPC)
i am running XP SP2 on my notebook.
Click to expand...
Click to collapse
Ok I see that you have a G4. Lokiwiz is a waste of your time since you have a G4.
Here is what you need to do:
Because you have a G4, you can't just flash a rom because of the DOC chip.
There are 3 ways I know of to flash a G4.
1. Download shelltools - install enablerapi.cab and cert_spcs.cab and reboot your device. connect with activesync and place the nk.nbf file of the rom of your choice in the shelltools directory and run shelltools and follow the directions in the readme. If you do it correctly, you will end up successfully flashing your device.
Link: http://forum.xda-developers.com/showthread.php?t=293480
2. Download SoftSPL and place the nk.nbf file of your choice in the RUU folder included and run SoftSPL and it is fully automated. It will call the RUU and your device will be flashed in about 7 minutes.
Link: http://forum.xda-developers.com/showthread.php?t=329147
3. Use the HardSPL(CID UNLOCK) and unlock your device prior to flashing. This will allow you to just flash roms at your leisure with no problems whatsoever from now on BUT it is still in developement so use at your own risk.
LINKS: http://forum.xda-developers.com/showthread.php?t=332330
http://forum.xda-developers.com/showthread.php?t=332320
I hope this helps you. I personally have a G3 so this is not my area of expertise...
wm6
thanks alot me. it upgraded properly
i am trying get all add ons.
ghumanfly said:
thanks alot me. it upgraded properly
i am trying get all add ons.
Click to expand...
Click to collapse
No problem... Now you're at the fun part. Add ons!!
add ons
when it comes to add ons,I was reading on the Rom Kitchen thread and and I couldn't see much more that could be added to the rom that Faris V5's nbf file.it seems to be one of thee most comprehensive files that I have come across. the only issue is that it runs a bit slow but it cool.I might just need to do some memory management.
other than that I would recommend the file.
do you have any other recommendations?
have u seen the article that microsoft wants xda dev... to remove all of its roms from the website?
ghumanfly said:
when it comes to add ons,I was reading on the Rom Kitchen thread and and I couldn't see much more that could be added to the rom that Faris V5's nbf file.it seems to be one of thee most comprehensive files that I have come across. the only issue is that it runs a bit slow but it cool.I might just need to do some memory management.
other than that I would recommend the file.
do you have any other recommendations?
have u seen the article that microsoft wants xda dev... to remove all of its roms from the website?
Click to expand...
Click to collapse
I personally use the TNT.1437 TouchFlo and TNT.1437 Professional+HTC Home roms personally modified to have a 10MB page pool. They are quite fast and are almost 100% stable with only minor bugs that are barely noticible...
Here is a link to the 10MB Version of TNT.1437 Touchflo
http://www.megaupload.com/?d=TM2N1W2R
Here is a link to the 10MB Version of TNT.1437 Prof+HTC Home
http://www.megaupload.com/?d=RZFKY868
If you would like, I can speed up the performance of faria's rom also and then upload the new nk.nbf file for you to try. Just let me know.
speed
Yes, please.... speed it up for me. if there are any other applications (add ons) that you feel should be added to the nbf file then please add them.
i have already shared the nbf file with many guys at work. we would be grateful if you can assist.
one last thing, i noticed that there is a 3G icon under the comms manager. one of the guys said that we should not have any issues accessing 3G even if the phone didnt come with it. is it possible to use 3G on these phones?
cmd> prompt when i use mtty
--------------------------------------------------------------------------------
hi,
i;ve managed 2 screw up my wizard
everything was going well
i flased sucessfully 2 three different roms..
then i flased the tnt latest beta rom
i worked fine
i reflased the same rom by mistake as i wanted 2 flash a diferent rom
this is when the problem sarted..
the upgrade got stuck at 66%
i waited for 15 minutes..
then i disconnected the usb from the phone & since then the phones stuck in the bootloader..
i've used mty
this is where i'm in unknown teritory..
it gives me cmd> prompt
no USB prompt..
any sugestions??
Hi all,
I tried to upgrade my MDA compact II (HTC Charmer) to WM6, but during the first step, downgrading to the "no vendor" version I made a mistake. A used a wrong version, it was for Prophet. After the final reboot, the device froze in the splashscreen "T-Mobile". After that I tried to do exactly the same with a "Charmer" version, but it didn't help me, the situation was the same.
However, now I'm able to flash successfully only the last vendor provided ROM update "RUU_Compact_ll_2060227_20602110_021921_T-MobileUK_Ship.exe", but it doesn't help me anyway, my Charmer is still freezing in the splashscreen. I tried to downgrade it , but the application gives the following error: "UPGRADE ONLY". When I try to make a hard-reset, and after that to confirm the factory settings by pressing "Yes" (green) button, the result is "Format FAT partition" and then "format is failed".
Only the bootloader is working now as well as the battery charging. Please, help me to turn back to the life my Charmer!
And one additional question: can I perform a CID unlocking just by ROM-flashing or the device must be fully operable?
Flash this:
http://rapidshare.com/files/41754719/RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe.html
After that, you should be able to make hard reset. If you succeed, flash "RUU_Compact_ll_2060227_20602110_021921_T-MobileUK_Ship.exe" - that.
Hello there,
I am a new use an recently got an MDA PM200. I am in exactly the same situation as petrun. I have tried the flash suggested by vlodeck but it doesn't work, saying incorrect vendor ID (I guess that's because it's for a Prophet?).
What should I do next...?
Thanks.
OK, I succeed with a little progress. Many thanks to vlodeck, I will try to explain what happend...
I successfully flashed my Charmer with this Prophet ROM:
RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
Full link:
http://rapidshare.com/files/41754719/RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe.html
But it was possible only by using this "No ID" update application, not original one, maybe because my device is still locked:
Full link:
http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
After that I succeed to format the FAT partition (finally ). But I cannot after all to flash the latest official MDA compact II firmware. There is two possible events, which I experienced:
1. When I try to use the original flashing application, I get the following response: "UPGRADE ONLY".
2. When I try to flash the official MDA compact II ROM, but through the "No ID" application, I get "INVALID COMMAND".
Just for explication, now my device cannot boot, it freezes in the splashscreen (it is Qtek now, not T_Mobile...) and the following versions could be read:
IPL 2.06
SPL 2.20.0000
GSM 02.47.21
OS 2.20.7.34
So, how I can do that? What should I do further? I would like to unlock my Charmer, but should I firstly make it operable?
Thanks in advance for your help, guys!
By the way, all described above I tried sevetal times with the same result.
The other thing is that... all links about the CID unlocking downloads, which I found here are no longer active. Any alternatives?
Rise from the dead!
Incredibly, but it's a fact! After successfull FAT formating I probably didn't wait long enough. Today I turned on my Charmer and several seconds after the splashscreen "QTEK" it successffully booted in WM5, performed all settings and finally started to work!
It's GSM module works, the Bluetooth works, I am able to start different applications. Just the camera does not work. And the most strange thing for me is that this ROM was for Prophet, not for Charmer
So, after all, how to proceed to upgrade to WM6? Now the bootloader is above ver.2.
Should I firstly flash it with proper ROM (for Charmer) or it's not necessary?
Should I unlock it as is now (Prophet ROM)?
Vlodeck, I rely mostly on you, since the WM6 with Touch FLO is your creation.
Thanks!
You dont have to CID unlock. Just flash that WWE T-mobile WM5 AKU2 for Charmer. Good luck.
Maybe I am boring, but steel need an advice: I cannot flash "WWE T-mobile WM5 AKU2".
1. The original RUU gives me "UPGRADE ONLY", maybe because my SPL after flashing the Prophet ROM is 2.20
2. This "NO ID RUU":
http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
reaches 2% and gives "INVALID COMMAND", after that - only bootloader screen.
3. This "NO ID RUU":
http://forum.xda-developers.com/attachment.php?attachmentid=42657&d=1183226200
cannot open the nk.nbf image (but works with other images), I don't know why.
What is the solution? Any ideas? Maybe some tool to downgrade the SPL to ver.1? I tried (it perhaps was bad idea)"RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship" and IPL became 1.12, but SPL remained 2.20... and Charmer didn't boot after that. After flashing the Prophet ROM it works again and IPL is 1.12, SPL is 2.20
In brief... how to flash successfully the last Charmer ROM?
If you cant flash the AKU 2 charmer rom, then go for AKU3.3 rom (can be german, that doesnt matter). Once done that, flash wm6.
Success
Yeah! Thanks to vlodeck now everitging is all right! I flashed the original German AKU3.3 ROM by using this RUU:
http://forum.xda-developers.com/attachment.php?attachmentid=42657&d=1183226200
(The original one gives "INVALID VENDER ID", of course, in German ) After that - successfully upgrade to WM6 TouchFLO.
Briefly:
1. First try to flashing WM6 - crash! The reason: old bootloader version (IPL/SPL = 1.12).
2. Flashing the Prophet ROM - success for FAT formatting. The Charmer turned back to life.
3. Flashing the German AKU3.3 ROM from T-Mobile, but through the No ID RUU.
4. Upgrade to WM6 TouchFLO by vlodeck. At the begining I reached the same problem, as described here:
http://forum.xda-developers.com/showthread.php?t=331717
but after istalling cert_spcs.cab and enablerapi.cab in my device I succeed to finish the process.
Thanks vlodeck, good job! This ROM is really amazing!
petrun said:
Yeah! Thanks to vlodeck now everitging is all right! I flashed the original German AKU3.3 ROM by using this RUU:
http://forum.xda-developers.com/attachment.php?attachmentid=42657&d=1183226200
(The original one gives "INVALID VENDER ID", of course, in German ) After that - successfully upgrade to WM6 TouchFLO.
Briefly:
1. First try to flashing WM6 - crash! The reason: old bootloader version (IPL/SPL = 1.12).
2. Flashing the Prophet ROM - success for FAT formatting. The Charmer turned back to life.
3. Flashing the German AKU3.3 ROM from T-Mobile, but through the No ID RUU.
4. Upgrade to WM6 TouchFLO by vlodeck. At the begining I reached the same problem, as described here:
http://forum.xda-developers.com/showthread.php?t=331717
but after istalling cert_spcs.cab and enablerapi.cab in my device I succeed to finish the process.
Thanks vlodeck, good job! This ROM is really amazing!
Click to expand...
Click to collapse
WHERE I CAN GET BOUTH FILES cert_spcs.cab and enablerapi.cab
AND WHAT VIRSION OF PROPHET ROM SEND ME WORKING LINK THX DEAR
Charmer Stuck At Splash Screen
CHARMER STUCK AT SPLASH SCREEN
--------------------------------------------------------------------------------
I HAVE A MDA COMPACTII ''MADE IN TIWAN'' I WITCH WM5 I WANT TO UPGRADE IN TO WM6 SO I UPGRADE THIS WM6 TouchFLO Charmer WM6 ver. 2.1 FINAL by vlodeck AT THIS HOME PAGE http://forum.xda-developers.com/show...harmer+cert_sp... AFTER THIS I HARD RESET MY MDA C2 ITA ON BUT THE LANGUAGE IS NOT ENGLISH I CANNOT UNDERSTAND ....
SO I CAN REFLASH IT WITH THIS ROM Charmer_Touch_GER_Beta_2.7 .. AFTER FLASHING COMPLETE I SOFT RESET MY MOBILE.
SO MY MOBILE STUCK ON SPLASH SCREEEN ONLY T-MOBILE IS SHOW
MY MOBILE DETAIL IS AS UNDER
IPL 2.06 .0001
SPL 2.06 .0001
GSM 02.19.21
OS 4.0.0.0
PLZ DEAR SIR WHAT IS SOLUTION OF MY MDA C2
MDA2 CANNOT CONNECT WITH ACTIVE SYNC
Of course it cannot connect with ActiveSync, the device doesn't boot. One certain solution for bricked Charmer is Prophet ROM:
RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
Use this link:
http://rapidshare.com/files/41754719/RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe.html
In order to flash this, you should enter the bootloader, without using the ActiveSync. After that try to perform a hard reset, you probably will succeed to format the FAT partition.
if you cannot connect the pda to pc HOW CAN U PUT THE ABOVE PROPHET RUU ON CUREENT?
I have a charmer and I was trying to update to wm6. I can´t because the ipl is 1.12. I updated rom to german aku 3.3. But I can´t hard reset. format error. I´m trying to put prophet rom to format it, but when I send the prophet rom, it always give me an error at 95%. error 326 - this nbf file cannot be used fo your pda phone. please check your nbf file. the aku3.3 rom flashes ok. any idea?? I try tu send a radio rom. after that is the same. 95%error. please help. I can´t bring my charmerback to life.
Hello together,
I have the same problem like _mestre_.
I updated from T-Mobile AKU 3.3 GER to WM6 and flashed back to WM5 without problems, but when flashing again to WM6 from vlodeck my charmer didn't boot anymore and had that "Format is failed"-problem when making a hard reset. I could not recover my device until now with the method explained in this thread cause of the problems "error 326 - This nbf file cannot be used for your pda phone". So the Prophet Rom does not seem to work with boot loader 3.x. Has anyone any idea? Please help! Thank you very much in advance!
Yallah said:
Hello together,
I have the same problem like _mestre_.
I updated from T-Mobile AKU 3.3 GER to WM6 and flashed back to WM5 without problems, but when flashing again to WM6 from vlodeck my charmer didn't boot anymore and had that "Format is failed"-problem when making a hard reset. I could not recover my device until now with the method explained in this thread cause of the problems "error 326 - This nbf file cannot be used for your pda phone". So the Prophet Rom does not seem to work with boot loader 3.x. Has anyone any idea? Please help! Thank you very much in advance!
Click to expand...
Click to collapse
same problem here... any suggestions or is my charmer bricked?
have a charmer. I tried to put wm6. but spl and ipl was 1.12. the phone start up and hang when installing some cabs. i restart ir and it allways crashes at t-mobile logo. i updated the rom to aku 3.3. all ok. but continues chashing on t-mobile logo. i try a hard reset. gives me a fat error. I try to put the rom from prophet to try to format it. but that rom upgrade reach 95% and stop. give me a error. this nbf file cannot be used to upgrade this device. I tryed all types of roms. most of them crashes at some point and give me that error. the rom aku 3.3 german and wwe, install perfect. I think that is the only roms I can send to my charmer. but i can´t format whith that rom, fat error. I have 3.08 spl ipl 1.12 because i sent an old charmer rom. ipl downgrade, but spl don´t. do you think my device can be protected?? I dont know that to do more, to bring the charmer back to life. will sd card method work? please help me.
Charmer dead after wm6 update whitout cid unlocking
Hi @all
i have the same problem.
iam stuped and make an wm6 update from ipl1.12 and i have forgot to cid unlock my charmer.
after the update to wm6 all looks like good. the bootscreen from wm6 i have see.
after the reset the charmer hangs at slashscreen.
now i make a update to aku 3.3 ger.
that works but hangs in the t-mobile spaschscreen.
i have tray all downgrading methodes i have read here but nothing works.
jet i have a ipl 1.12. and spl 3.08.
I think only a sd-card rom update works. but i dont have found an sd-card rom to use.
sorry to my bad english.
please can anybody help me?
cu AxelD
Is my phone already dead? Please help me!
Hi, I have a similar may be the same problem!
My phone is a German t-mobile mda compact 2
First I work with “lokiwiz v.02” to unlock the SIM, and it works really well.
Then I installed “Charmer_Touch_ver._2.1” and I could calibrate the screen, and after that Win Mobile 6 installed all the extra stuff automatically. After that the device made a reboot, but it stop at the t-mobile boot screen.
Because the bootload modus is still running, I installed the newest original t-mobile software “RUU_compactII_AKU3.3_38222_382117_026921R_TMO_DE_GER_Ship” but this also didn’t solve the problem.
Hard reset didn't work and always says "Format is
The Start screen shows me this information:
IPL 3.08
SPL 3.08.0000
GSM 02.69.21
OS 3.8.2.22
Is my phone really dead or could someone tell me a trick to reactivate it?
I think noone have a solution for us. I tried to send commands to phone whith mtty. and I can´t send. I don´t know why. so f we cannot send commands the sd card method will not work too. the only olution is to jtag the charmer. but can´t find any pinout information. if anyone knows this informtion, please help.