I am following the instructions from T-Mobile on for to install the upgrade.
I have downloaded to the desktop and renamed it, "T-Mobile MDA MSFP Upgrade". The MDA is NOT connected.
I start the program and select the first NEXT key. A couple of seconds pass and this error comes up, "This apllication has failed to start because RAPI.dll was not found. Reinstalling the application may fix this problem".
I erased the program and re-downloaded it, changed the name and received the same ERROR.
The instructions are pretty simple, so I don't see where I am doing something wrong, but yet this ERROR arrives!
Can someone shed some light on this issue for me. My brand NEW, just got it yesterday is hungry for the upgrade, but instead of enjoyment, I am getting frustrated. HELP PLEASE!!!!!!!!!!!!!!!!!!! :?
Joey
Related
Hello,
I need some expert help to get my XDA IIs out of bootloader.
I attempted to update ROM and got stuck in Bootloader.
I followed directions posted on this forum to the letter:
Make sure your device or cradle is connected directly to your computer (so no hubs!)
Disconnect the device from the PC, or remove from cradle
Perform a "hard reset" on the device (screen will flicker but nothing will change)
Kill the BaUpgradeUt.exe program on your PC by using Window's Task Manager (CRTL+ALT+DEL)
Kill the wcesscom.exe program on your PC by using Window's Task Manager (this is the ActiveSync application)
Place the device back in it's cradle
Restart the upgrade program from your PC (double-click BaUpgradeUt.exe)
Still No JOY !!! Any suggestions ?
Solution to Upgrade..?
Hi, have you looked at this properly..?
http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade
Or - If you're trying to update to WM5..
http://wiki.xda-developers.com/index.php?pagename=BA_5.1.1700_build_14343_Upgrade
Then you should be ok.. Take a breather, start again..
Let me know how you get on..?
Cheers,
Stuck in Bootloader Screen
Mr Philly,
Thank you very much for your help, however I followed the links you gave me, and still have no joy.
When I run the BaUpgradeUt.exe I get a "connection error" saying check the physical connection between the phone and the computer. Also, BaUpgradeUt seems to close active sync once launched. The program then freezes unless I reopen active sync. I then get the connection error.
When I run the MaUpgradeUt.exe I get to the upgrade screen telling you that you are upgrading from ... to ... however the fields listing the various ROM versions etc.. are blank. If I click on upgrade, I get an error 150 saying "not designed for your device, please get proper ROM upgrade utility."
Any new suggestions for me ?
Missing my XDA very much as I use it a lot.
Thanks
I figured out the problem. It seems that the PDA was not responding to the ROM upgrade because the SD Card was in place. Origionally I thought this to be of no consequence as I only have a "dummy" card in the slot. I was wrong. Once I removed the Card everything went as it was supposed to.
:wink:
Stuck on bootloader
Hi all,
I copyed in fakt i did cut some files from my BA and moved to Storage Card (1Gb), and it restart byhimself and i am stuck on the bootloader. ??? Shall i rom Upgrad it ?
Howlingwolf
Hi Guys, I have bricked my Cingular branded BA Siemens SX66 PH20B. I am getting the no GSM error, I have read the WIKI and read the thread that follows Help, my device shows "No GSM" after upgrading, and I can not perform any more ROM upgrades Link. I have tried the steps and nothing seems to be working, I guess I must be a complete noob but i have spent hours trying to get the radio to install and nothing will work. I have spent 6 or 7 hours looking on here before i requested help I was running the radio unlock when a tree took out the power line to my house. I edited the ruu.conf and that didnt help I ran the MaUpgradeUt_noID.exe and it will update my rom with no problems at all it just hangs at the radio install and wont go anywhere i get a "Error 114: Radio update error" If someone can help I would appreciate it.
Might help.
I'm not quite sure about your problem but I did get the same radio update error couple times. One thing that I had to do is to let my computer (active sync) recognize my device first. After that the redio update error is gone.
I got it fixed, what i did was install an original rom from seimens that i got at SX66 (Blue Angel) Standardization Project, itfixed the radio error and then i could reinstall the updates
Hi guys,
I am asking if there is anyone kind enough to help me with my kaiser...?
the issue is the following, the first week wm 6.1 was released I upgraded my kaiser with no problem until last weekend.
last weekend navigating through your forum I decided to install TF3D and a hardSPL was recomended, I downloaded the file SJ_JumpSPL1.93-KAIS and run it on my kaiser. I believe the process got stuck on the 3 color display, I rebooted the kaiser and it seemed ok... but I am not able to navigate the web neither by GPRS or 3G...
this morning I tried to reinstall the kaiser from scratch with a RUU named _HTC TyTN II_RUU_Kaiser_HTC_WWE_Brightpoint_US_3.29.422.1_radio_sign_25.83.40.02_1.70.18.02_Ship
which I downloaded from the HTC website but an error didn't allow it to be complete: ERROR 294: INVALID VENDER ID
HDa3-KBKV5867-HUEbc572-KBKV55670
my goal is to update my kaiser to the look as the TF3D or the amine 2.0 or the Hiperdragon.
I ask anyone of you gentleman to URGENTLY help me fixing my kaiser as this my office tool...
gomesmachado said:
Hi guys,
I am asking if there is anyone kind enough to help me with my kaiser...?
the issue is the following, the first week wm 6.1 was released I upgraded my kaiser with no problem until last weekend.
last weekend navigating through your forum I decided to install TF3D and a hardSPL was recomended, I downloaded the file SJ_JumpSPL1.93-KAIS and run it on my kaiser. I believe the process got stuck on the 3 color display, I rebooted the kaiser and it seemed ok... but I am not able to navigate the web neither by GPRS or 3G...
this morning I tried to reinstall the kaiser from scratch with a RUU named _HTC TyTN II_RUU_Kaiser_HTC_WWE_Brightpoint_US_3.29.422.1_radio_sign_25.83.40.02_1.70.18.02_Ship
which I downloaded from the HTC website but an error didn't allow it to be complete: ERROR 294: INVALID VENDER ID
HDa3-KBKV5867-HUEbc572-KBKV55670
my goal is to update my kaiser to the look as the TF3D or the amine 2.0 or the Hiperdragon.
I ask anyone of you gentleman to URGENTLY help me fixing my kaiser as this my office tool...
Click to expand...
Click to collapse
Why do people continue to screw up their phones by not reading, not understanding what they are doing, and doing things half the way. Are you all just rich and don't care about bricking a $500 dollar phone ? You are lucky you are able to recover your phone at all
Jumpspl is not hardspl . Jumpspl transitions your phone from stock spl to hardspl. You cannot flash any rom stock or custom ,that isn't specifically made for your carrier, until you have hardspl on your phone.
Read thoroughly and follow all the steps here, do not take short cuts and do not skip ahead,
http://forum.xda-developers.com/showthread.php?t=433835
canot do.....
Dear denco7
let me start to thank you for your help and specially point of view... jejejeje
no I am not crazy to ruin my kaiser and as you know it isn't a cheap phone to try to play with it without knowing what you are doing... anyway, that is why forums like this exist and specially kind people like you to help us crazy people... jejeje
well,
i followed your instructions carefully until number 6 on the list. once I tried to run any of the jumpSPL files this error message apeared in my kaiser
"The file 'JumpSPL1.56-KAIS' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
which I did and once again no luck....
Are you patient enough to continue helping me?
Dear denco7
let me start to thank you for your help and specially point of view... jejejeje
no I am not crazy to ruin my kaiser and as you know it isn't a cheap phone to try to play with it without knowing what you are doing... anyway, that is why forums like this exist and specially kind people like you to help us crazy people... jejeje
well,
i followed your instructions carefully until number 6 on the list. once I tried to run any of the jumpSPL files this error message apeared in my kaiser
"The file 'JumpSPL1.56-KAIS' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
which I did and once again no luck....
Are you patient enough to continue helping me?
gomesmachado said:
Dear denco7
let me start to thank you for your help and specially point of view... jejejeje
no I am not crazy to ruin my kaiser and as you know it isn't a cheap phone to try to play with it without knowing what you are doing... anyway, that is why forums like this exist and specially kind people like you to help us crazy people... jejeje
well,
i followed your instructions carefully until number 6 on the list. once I tried to run any of the jumpSPL files this error message apeared in my kaiser
"The file 'JumpSPL1.56-KAIS' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
which I did and once again no luck....
Are you patient enough to continue helping me?
Click to expand...
Click to collapse
What do the numbers say on your bootloader screen ( tricolored)?
it doesnt get that far, as soon as I doble click on the jumpspl file it shows that error message. the tricolored screen never apears
gomesmachado said:
it doesnt get that far, as soon as I doble click on the jumpspl file it shows that error message. the tricolored screen never apears
Click to expand...
Click to collapse
Press and hold camera button and power button and do a soft reset to get into bootloader to see what it says.
gomesmachado said:
it doesnt get that far, as soon as I doble click on the jumpspl file it shows that error message. the tricolored screen never apears
Click to expand...
Click to collapse
Thats because you're not making it go to that screen..
Press and hold camera button and press reset
it says:
KAIS130
SPL-3.28.000
CPLD-8
gomesmachado said:
it says:
KAIS130
SPL-3.28.000
CPLD-8
Click to expand...
Click to collapse
Go to the wiki and find the original rom from your carrier and flash that ie: AT$T , T- Mobile, orange , 3 etc. Then after doing trhat try all the steps in the flashing for noobs thread again.
the only problem is that I bought the phone not from a carrier but from a store in Portugal and the phone was unlocked...
do you think I can still find the original ROM?
I couldnt find any suitable rom for my device I tried:
_HTC TyTN II_RUU_Kaiser_HTC_WWE_Brightpoint_US_3.29.422.1_radio_sign_25.83.40.02_1.70.18.02_Ship
with no luck.
help me please...........
gomesmachado said:
I couldnt find any suitable rom for my device I tried:
_HTC TyTN II_RUU_Kaiser_HTC_WWE_Brightpoint_US_3.29.422.1_radio_sign_25.83.40.02_1.70.18.02_Ship
with no luck.
help me please...........
Click to expand...
Click to collapse
It is not 3.28.410.0 on this list ?
http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
Help me Denco7 you're my only hope.
Denco7,
I tired to run the file that you told me with no luck.
it showed the same message of before:
ERROR 294: INVALID VENDER ID
what else can I try to fix my phone?
Does this help
http://forum.xda-developers.com/showthread.php?t=335568
http://forum.xda-developers.com/archive/index.php/t-425558.html
I need to upgrade my i-mate but the RUU gives me the Error 120: Country Code Error...
Anybody can solve this?
-Thanks!
put your device in bootloader mode before connecting, and use maupgradeut_noid. that question has been asked and answered hundreds of times, please search the forum next time you come along a problem
In order not to multiply the topics:
I have succesfully upgraded my Tmobile MDAIII to Win 6.1 via the mentioned above method. And now I want the start-button-in-the-bottom
So I downloaded the image file, put MDA into a bootloader, plugged it into craddle, started maupgradeut_noid and... the second screen didn't show any data about the device. (in FAQ "something went wrong, start over again" is advised). Several attempts were of no use. The fresh XP SP3 also didn't help. What is wrong??
By the way, the official upgrading software (that one that shows Invalid country ID later) does show the device info screen correctly.
I have succesfully upgraded my Tmobile MDAIII to Win 6.1 via the mentioned above method. And now I want the start-button-in-the-bottom
So I downloaded the image file, put MDA into a bootloader, plugged it into craddle, started maupgradeut_noid and... the second screen didn't show any data about the device. (in FAQ "something went wrong, start over again" is advised). Several attempts were of no use. The fresh XP SP3 also didn't help. What is wrong??
By the way, the official upgrading software (that one that shows Invalid country ID later) does show the device info screen correctly.
you should re-download the rom and the RUU and try again. in general, the way you're doing it, is right. remember to take out the sim and sd card though or you might mess up your radio.
i would say, i know everything, there is to know, when it comes to flashing the BA, and still last weekend i spend hours on up- and downgrading, because sometimes, it just wouldn't show the info, mostly, when a download was corrupt, although no error message was given.
Chef_Tony
You were right, it was the radio-file. When I deleted it everything went as it should. But the radio still needs an update I think (I've 13th version) since the bugs are freaking me out sometimes.
Thank you!