Hi all.
i have my k-jam with broken lcd. i ve changed the lcd but now my phone is doing some problems. its not charging and it hangs at startup.
IPL 1.01
SPL 1.01
GSM 1.1.10.0
OS 1.1.9.3
this is written on startup screen and nothing moves forward. neither it showing any reaction when i put it on charging.
plz help me to solve this problem
Related
I used a prebuilt splash screen replacement from here ( the htc innovation smiley) when I got the fone with the stock rom1.XX it showed a tmob splash then a windows mobile splash.
I switched to the xelencins 2.26 with the tmob radio 2.25 replaced with the cing of the same version(ot: I get much better siginal now) Then I applied the splash screen.
So now the "HTC" bootscreen shows then a "TMOB" splash pops up with the rom info then the "windows mobile" splash shows...
I dont mind the windows mobile splash (i wish it were green and not blue...but) I would like to get the Tmobile #2 splash screen replaced, its so damn ugly, I hate pink!....
bhang
deff agreed....made new splash screen a few days ago, and realized i get the HTC logo....than comes my custom splash screen, than comes the windows mobile splash screen....how do i make it so that the HTC one wont appear....and so that i can have the GREEN windows mobile splash screen as the 3.2 rom has? and how do i change the windows mobile splash screen either way? becuase the only splash screen i was able to change was the one where it displays the ipl spl rom os radio infos
please get back to me....thanks
THE INSTALLER i HAVE DOES SPLASH #1 AND YOURS SEEMS TO DO THE 2ND SPLASH THE ONE WITH THE OS NUMBERS, WE TRADE AND THAT FIXES THE FIRST HALF OF BOTH OF OUR PROBLEMS...
SORRY ABOUT THE CAPS, iM IN THE MIDDLE OF EDITING SOME HEX AND FORGOT IT WAS ON...
BHANG
those are just the screens tho, its not the program that puts them in the wizard as bootscreens
HERE IS THE HTC INNOVATIONS SMILEY THAT i USED YOU CAN JUST REPLACE THE SPLASH SCREEN IN THIS PACKAGE
damn caps again, F-ing blocker troubles with my sats has me editing hex the last 2 nights sorry once again, atleast I noticed sooner...
bhang
hey you said the bootscreen loader you used replaced the splash with the spl/ipl and os gsm numbers, right?
if so could you attach it cause thats the tmob splash I cant get rid of
Have my MDA III for 3 month , just wanted to start up my Kaiser as done for hundred times before, got a very short notice: " loading no image found " and after this a red,green,blue and white screen; in the red part it says:
KAIS130
SPL-1.56.0000
CPLD-8
and the device stays on, nothing works.....tried the soft reset, same result
realy dead ??
thoughts ?
Rien
Nope, have you installed hardspl before? If you have simply flash to the rom you had before and start again.
Hi - I had the same problem. I sent it in for repair and they replaced the MainBoard for me. It seems to be a rather serious issue.
I suggest you contact HTC for a warranty repair.
I have a T-Mobile MDA G4 with IPL 2.21.0001,
SPL 2.21.0lip, GSM 02.25.11 nd OS 2.26.10.2.
I have flashed it with WMSE_4. I am getting yellow streaks in some screens. The streaks switch when the keyboard is slid out, so it is not in the screen, it is in the firmware. I reflashed the ROM, with no change. All other functions of the phone work correctly. It is most serious on the Messaging screen. I tried to load pictures, but the upload failed.
Any suggestions?
Hello,
Guyz - been using cooked ROM's for ages now and all has been cool till now
:-(
When my Touch Diamond goes to the multi colour screen (not sure on the name for this screen by hey!) its the one with the red, green, blue and white stripy part
anyways... ill continue, on the bottom half of that screen it usually switches from the word 'Serial' to 'USB' then goes onto the next screen where it pushes out the ROM to the device....but the big problem is that it stay on the stripy colour screen saying 'serial' and I have to soft reset the device to go back to the current ROM i have on the machine. I cant push out the SPL 1.24 back to it - it wont take a new ROM onto it :-(
A bit of history - I did have SPL 1.24 on my device and all was cool - have put on SPL 1.40 OliNex recently and I think this is the thing that has caused my problem :-(
Want to know if there is anything I can do?
Cheers,
D^
d3toxuk said:
Hello,
Guyz - been using cooked ROM's for ages now and all has been cool till now
:-(
When my Touch Diamond goes to the multi colour screen (not sure on the name for this screen by hey!) its the one with the red, green, blue and white stripy part
anyways... ill continue, on the bottom half of that screen it usually switches from the word 'Serial' to 'USB' then goes onto the next screen where it pushes out the ROM to the device....but the big problem is that it stay on the stripy colour screen saying 'serial' and I have to soft reset the device to go back to the current ROM i have on the machine. I cant push out the SPL 1.24 back to it - it wont take a new ROM onto it :-(
A bit of history - I did have SPL 1.24 on my device and all was cool - have put on SPL 1.40 OliNex recently and I think this is the thing that has caused my problem :-(
Want to know if there is anything I can do?
Cheers,
D^
Click to expand...
Click to collapse
try disable usb connection in activesync or windows mobile device center if ur using vista
Please help me with a HTC KAIS120 I received it today on the color screen, it just gets it, got a firmware 100% but when I ask for the error of the vendor ID is not valid, ask friends to help what can I do?
Thanks
It shows three colour screen?
tell me what text is written on the screen about SPL
like
SPL 3.56.olipof or something like that?
The colors are red, green, blue screen is written KAIS120 SPL 1.94.0000 CPLD-8