Have my MDA III for 3 month , just wanted to start up my Kaiser as done for hundred times before, got a very short notice: " loading no image found " and after this a red,green,blue and white screen; in the red part it says:
KAIS130
SPL-1.56.0000
CPLD-8
and the device stays on, nothing works.....tried the soft reset, same result
realy dead ??
thoughts ?
Rien
Nope, have you installed hardspl before? If you have simply flash to the rom you had before and start again.
Hi - I had the same problem. I sent it in for repair and they replaced the MainBoard for me. It seems to be a rather serious issue.
I suggest you contact HTC for a warranty repair.
Related
Hello,
Guyz - been using cooked ROM's for ages now and all has been cool till now
:-(
When my Touch Diamond goes to the multi colour screen (not sure on the name for this screen by hey!) its the one with the red, green, blue and white stripy part
anyways... ill continue, on the bottom half of that screen it usually switches from the word 'Serial' to 'USB' then goes onto the next screen where it pushes out the ROM to the device....but the big problem is that it stay on the stripy colour screen saying 'serial' and I have to soft reset the device to go back to the current ROM i have on the machine. I cant push out the SPL 1.24 back to it - it wont take a new ROM onto it :-(
A bit of history - I did have SPL 1.24 on my device and all was cool - have put on SPL 1.40 OliNex recently and I think this is the thing that has caused my problem :-(
Want to know if there is anything I can do?
Cheers,
D^
d3toxuk said:
Hello,
Guyz - been using cooked ROM's for ages now and all has been cool till now
:-(
When my Touch Diamond goes to the multi colour screen (not sure on the name for this screen by hey!) its the one with the red, green, blue and white stripy part
anyways... ill continue, on the bottom half of that screen it usually switches from the word 'Serial' to 'USB' then goes onto the next screen where it pushes out the ROM to the device....but the big problem is that it stay on the stripy colour screen saying 'serial' and I have to soft reset the device to go back to the current ROM i have on the machine. I cant push out the SPL 1.24 back to it - it wont take a new ROM onto it :-(
A bit of history - I did have SPL 1.24 on my device and all was cool - have put on SPL 1.40 OliNex recently and I think this is the thing that has caused my problem :-(
Want to know if there is anything I can do?
Cheers,
D^
Click to expand...
Click to collapse
try disable usb connection in activesync or windows mobile device center if ur using vista
One day I went to make a call and couldn't.. My htc tilt (AT&T) has a red, green, blue, & white screen with
KAIS1*0
SPL-3.56.0000
CPLD-8
Serial
I did try reflashing the rom several times... 1st few tries show the percent bar but then comes back to the RGB screen... I was able to get it as far as tap to set up the phone... and it gets to the load programs screen... loads everything then will reboot automatically.. but it goes right back to the RGB screen again..
Anyone have any ideas on what I can do (if anything) to resolve this issue? This phone is out of warranty and any suggestions would greatly be appreciated. Thanks in Advance.
http://forum.xda-developers.com/showthread.php?t=423486
Hello,Glad to find you
I turned off my kaiser and put the second battery i use and when I try to turn it on i get a screen with 4 horizontal lines (red,green,blue,white) and I can see on the top
KAIS130
SPL-1.93.0000
CPLD-8
and on the bottom
Serial
Why did this happen?
Do you know what I should do to make it work again?
I'm sure search would help, or the wiki/sticky.
Well,I searched and found
Kaiser_Stuck_at_bootloader
but in my case I tried nothing of these stated there,as it just showed these lines all of a sudden without me trying to change rom or something..
OK fixed,just dust was in the camera button,pressed it a couple of times,switched on again and everything ok
Hey this is the first time I'm on the site as well as with this phone. My friend gave it to me as a gift and like the title stated I'm stuck on a red green blue white screen. On top of all the color it says "security unlocked" and in the red it says "KAIS1*0 MFG, SPL-1.0.OLiPof, CPLD-8". Is there anyway I can fix this? Please no bad comment cause like I said Im new at this I found this site threw google and seen solutions for bootloader issues not "security unlocked". Thanks
The phone is a tilt/kaiser for att
Just because you are new doesn't mean you don't have to search.
Please help me with a HTC KAIS120 I received it today on the color screen, it just gets it, got a firmware 100% but when I ask for the error of the vendor ID is not valid, ask friends to help what can I do?
Thanks
It shows three colour screen?
tell me what text is written on the screen about SPL
like
SPL 3.56.olipof or something like that?
The colors are red, green, blue screen is written KAIS120 SPL 1.94.0000 CPLD-8