SIM Access Profile Cab not work - MDA III, XDA III, PDA2k, 9090 Software Upgrading

Helmis Sim Access Profile not work. No Chance...
No Connect with AUDI A4 Bluetooth Premium System .
Without SAP, it´s only possible to connect with Jetware Software and MS Bluetooth Stack (not Widcomm Stack!!), but NO SIM Messages and NO Keypad on Audi-Radio-Screen.
Helmi, any solution or newer version of Sim Access Profile CAB for testing?
Balko
PS: Helmi, thanks for your great work!!!

Related

Can we transfer the Widcomm BT stack to a Blueangel?

Folks: the latest ROM upgrades released by the different carriers are still very defficient on the BT stacks. I was wondering if there is anyway to transplant the Widcomm stack, say from an ipaq 6315 to a Blueangel.
I am somewhat frustrated with the BT inability to connect PC to internet via wireless modem.
I think there was a post on how to do this on a Himalaya. Still trying to find the link.
Any thoughts are appreciated.
Fernando
You can use BA as a BT modem for PC. Just run a Wmodem application and select "bluetooth" as the connection method.
And you can easily transfer BT stack from 6315 to BA. But I don;t think that this would fix the BT issues.
Hello mamaich: I have tried repeatedly to use the Wireless Modem via BT to connect my PC to the internet. The connection drops after a couple of seconds and I get a "734 error". The most recent ROM update from imate, Qtek and O2 has not solved this problem. However, I did try the Wireless Modem via BT with an iPaq 6315 and it worked like a charm. Am I missing something here?
Thanks for any advice.
Fernando
Using GPRS? If yes, don't forget to put the modem advance init string. Something like +CGDCONT=1,"IP","apn name". Do a search, you will find several post about that.

Unofficial Bluetooth Stack "Upgrade" For iMate PDA

Check out this link from PocketPCThoughts.com for a new Bluetooth patch from Broadcom for the PDA2K...
Fellow MVP Helio Diamant, of Pocket PC Freak, has gotten a fantastic little nugget for iMate PDA2k owners:
Quote:
A friend of mine has just come back from CES and brought with him a little CAB file that was being given by the guys from Broadcom there. They told him we can publish and offer for download, so I am putting it here to you guys too.
When installed, this CAB adds the following profiles to the Broadcom BT stack in the PDA2K:
1. High-Quality Audio
2. Keyboard
This means that those of you holding stereo headsets can now connect them to PDA2k and here music, navigation instructions, etc from the device. As well, Bluetooth Keyboards are supposed to work well.
Early reports suggest it works with a number of devices, including both HTC Blue Angel and HTC Harrier units; it might work with other Broadcom-based (i.e., Widcomm) Bluetooth units, but there's no guarantee. If you're interested in playing "with it, you can download the CAB here. Note: This update is unofficial and unsupported; install it at your own risk, and do a backup first! As far as I know, it's a RAM update, but I haven't tried it. Good luck if you do. "
http://www.pocketpcthoughts.com/images/parekh/misc/PDA2K_BroadcomCorp_BTUpdate.cab
i already installed on my i-mate and had to do hard reset since it hanged in boot mode.
thanks to sprite backup i am back
noviur said:
i already installed on my i-mate and had to do hard reset since it hanged in boot mode.
thanks to sprite backup i am back
Click to expand...
Click to collapse
Noviur,
On which device did you try ? i-Mate PDA2k?
cheers,
bins
install seems not to work
Just tried the cab install (both from my SD card and Program Files location - after resets), but nothing seems to have changed on my i-Mate PDA2k with Rom 1.22.162 WWE.
1. No BT Services were added (still only File Transfer, InformationExchange, Serial Port, Personal Network Server, Dial-up BNetworking Server, Hands-Free),
2. No update seems to have happened, all module versions remained at 1.0.0.3500 (except obviously the BTPluginManagerCE.exe [1.0.0.1]),
3. Despite the dialog box telling it is "writing information for Remove Programs" it can not be found back in the Remove Programs.
Any clues?
cheers,
bins
P.S. Just in case, and like Noviur, reverted with Sprite Backup
The version information in the package suggests 1.6.0.0600
did you install the 1.6.0.0600 upgrade before u installed this?
i installed it.. the new 2 profiles show up but the audio one doesnt work ..
i have pda2k
any help???
I installed the new patch on an SX-66. It doesn't upgrade the Bluetooth stack or provide new services. But it does add 2 new profiles. One for a Stereo audio headset (this won't work with a Hands free device since the profile doesn't include support for a MIC.) and one for a keyboard.
I also switched my Bluetooth stack to the 1.6 version posted here. This seems to be a stack based on Widcom as opposed to Microsoft. Although my device worked and seemed to pair faster my Handsfree device didn't come on when dialing the phone. So I switched back.
Remco, thx, installed the Broadcom 1.6.0.600 cab-file first and afterwards installed the PDA2k cab-file.
Update seems to have worked and indeed have the two new client profiles.
Will check in the store tomorrow if the HQ audio works indeed and if no other nuisances arise.
Will keep you in the loop.
cheers,
bins
Installed it on my Qtek9090 with rom 1.22.00/1.06.00/1337.38/1.22.556
I was able to bond my Logitech DiNovo keyboard to the PDA and use it !
It works very well, very cool to be able to type on a full size keyboard on your PDA.
I don't own a BT audio headset, so i wasn't able to test that.
All other devices like my GPS mouse, Bluetrek G2 headset etc. seem to work ok as they did before.
nop, it was I-Mate PPC. I new it is for PDA2K, but wanted to try it
Previously I installed Widcom BT 1.6.
No luck for me ... for now at least
Did it answer calls through the b/t headset? Mine wouldn't connect to the headset for outgoing or incoming calls. Also if it does work,which PDA2K cab did you use?
Thanks
bins said:
Remco, thx, installed the Broadcom 1.6.0.600 cab-file first and afterwards installed the PDA2k cab-file.
Update seems to have worked and indeed have the two new client profiles.
Will check in the store tomorrow if the HQ audio works indeed and if no other nuisances arise.
Will keep you in the loop.
cheers,
bins
Click to expand...
Click to collapse
anybody tried it on an magician device?
The file is no longer there!
Could someone please upload them agian or e-mail it to me
[email protected]
Thanks
Does this upgrade support the Audio Gateway preference (which enable u to stream mp3s to a BT headset)??
can somebody please email it to mack AT netcom.no ?
(the download URL does not work)
hi,
I have look high & low for it.
can i have the bt upgrade too? my email [email protected]
and that there is of the option of the BT dial up modem??
for when they will troubleshoot this.
greetings
Here's the file
I tried it on my HTC Himalaya. It wouldn't play any sound, not even callers voice. I had to hard reset the unit.
Good luck
Johan
Hi,
I just got my HP bluetooth headphones... and I absolutely love them!!!. The range is ok... not great, but enough to be considered fully usable. It crackles if there is some physical resistance between the MDAIII and the headphones, but other than that, they are awesome...
Anyone that is considering to get them, I highly recommend it. But be sure to have a 3500 bluetooth stack (with the extensions posted here of course) and Radio 1.06.02 (I am not sure whether 00 would do equally, but I recommend 02).
Treo
Me too. Can someone email me a copy of this file?
[email protected]
Thanks!

SIM Access Profile

Hello,
I looking for a solution to get SAP (SIM Access Profile) working on my Blue Angle.
T-Mobile offers an official Update vor some other MDA-Models, they call it AKU 2.0...
I've tried a AKU 2.3 ROM from Helmi, but my car ca not find my mobile device.
Can anyone explain, if it is possible to get SAP working and if it is... how to do it?
by
Carl
I too would be interested in this SIM Acces profile upgrade for simialr device. Orange SPV M2000
I too would be interested in this SIM Acces profile upgrade for simialr device. Orange SPV M2000
please try here:
http://forum.xda-developers.com/viewtopic.php?p=343146#343146
let me know if it work/not..
SAP Works Great
Thanks Helmi! It works flawlessly on my prophet! I have succesfully paired my Passat's premium bluetooth system with it and made and received calls. I even have my sms messages on the car's screen.
All the best,
Yousss
Anyone tried this on a BA yet?
Helmis Sim Access Profile not work. No Chance...
No Connect with AUDI A4 Bluetooth Premium System .
Without SAP, it´s only possible to connect with Jetware Software and MS Bluetooth Stack (not Widcomm Stack!!), but NO SIM Messages and NO Keypad on Audi-Radio-Screen.
Helmi, any solution or newer version of Sim Access Profile CAB for testing?
Balko
Download
Hi,
Can you tell me where can i download the SIM access profile for a MDA3 under Windows Mobile 2003
Thanks,
Lionel
SAP for P525 WM5
Hi All,
I am looking for a patch or a software which will provide me Sim Access Profile Bluetooth service on my P525 ASUS under WM5.
I tried Jetware v1.1 and it doesn't work with my P525. So if someone have an idea, It will be very very much appreciated.
Hi,
I am also looking for a SAP profile for my P525 to get it run with my Nokia 616.
Thanks
Forty2
Forty2 said:
Hi,
I am also looking for a SAP profile for my P525 to get it run with my Nokia 616.
Thanks
Forty2
Click to expand...
Click to collapse
hv u tried my sap profile add-on from above? In my device (BA) we hv problem with accessing sim so it might be the problem with BA.
BMW Connectivity at Last
Having tried and tested all the BT option with the Helmi AKU3.2 rom I now have a working hands free with the BMW idrive (2006) BT System by using the MS Stack and this SAP addon. I will try the Helmi Broadcom stack this week and will keep you posted on the BA WM5 Broadcom 1.7.1 Build 3400 Stack (Test) pages.
Thanks to Helmi for all his hard work with this excellent ROM
@helmi:
I tested the SAP you provided with bluetooth in an A6. It does not work. Although during my testing somehow part of the phonebook of my MDA3 is now stored in the cars phonebook. So partly it seems to work. But the car is unable to connenct to my phone.
My phone is listed when the car searches for SAP phones, it initiates the pairing where I have to type the long pin into the phone, but after that the car always says it can not connect.
BY
helmi_c said:
hv u tried my sap profile add-on from above? In my device (BA) we hv problem with accessing sim so it might be the problem with BA.
Click to expand...
Click to collapse
Hi,
sorry for not having enough knowledge.
What the hell is BA???
And which addon you mean?
Forty2
Forty2 said:
Hi,
I am also looking for a SAP profile for my P525 to get it run with my Nokia 616.
Thanks
Forty2
Click to expand...
Click to collapse
Hi,
I installed the CAB file on my P525 but did not have time to test it until now.
Nevertheless one questions.
How do I see that SAP is enabled?
Thanks
Forty2
Forty2 said:
Hi,
I installed the CAB file on my P525 but did not have time to test it until now.
Nevertheless one questions.
How do I see that SAP is enabled?
Thanks
Forty2
Click to expand...
Click to collapse
Hi,
I tested it and it does not work.
Is there any update available?
Thanks
Forty2

bluetooth's problem with PARROT

hi,
i have same problems with bluetooth and my parrot 3100. anybody?
thanks
Hi, as I posted before, I have problems with the vocal instructions of Tomtom6 . If I connect my Trinity with parrot CK 3100, the calls work, but the navigator instructions remain on PDA's loud- (so to say) -speaker. Is it the same for you?
VOIP SIP HTC Fuze
Installed and configured VOIP config tool on my WM 6.1 but it never works.
It shows Selected Internet calling but when i try to call ,,it fails without any error.'
Mani

Has anyone got GPS2Blue to work?

I've been trying to link a TyTn II to my S730 as a remote GPS receiver for TomTom Mobile. I thought I would try GPS2Blue first because it's free.
There is lots of advice on getting GPS2Blue working with XP laptops but has anyone successfully paired with another WM6 device.
I can pair the 2 devices ok and swap files through Bluetooth Explorer but nothing happens if I switch on GPS2Blue:
- if the phones are paired GPS2Blue can't open the BT port
- if the phones are not paired, GPS2Blue will activate BT on the TyTn but the S730 can't discover it
- in both cases, there are no options on either phone for setting incoming or outgoing COM ports (unlike WM5)
I'm guessing that the TyTn is presenting itself as a PPC device, not a serial GPS device. But I thought GPS2Blue was supposed to rectify that.
Can anyone help?

Categories

Resources