When I try to install original XDA2i software on my PCs (running both Win XP Pro SP2 and Win 2003 Server Ent.) - AppSuite O2 WWE v1.0.0.4.exe, it prompts that 'In order to complete your installation please perform soft reset of your XDA2i device'.
Actual seoft reset doen net change anything and installation routine just quits and that's it. And it does not matter whether XDA2i is on the cradle or not, result is the same.
Do I do something wrong?
Is there any other alternative driver source to enable XDA2i interface on Win XP system?
Related
I have a qtek9090 and it will not boot up, it says "Serial and v2.06". When I place it in the cradle, it changes to USB. I cannot boot it, I can't upgrade it ( connection error). What an I missing?
Re: Help Please, BlueAngel not booting up, not able to upgra
todixy said:
I have a qtek9090 and it will not boot up, it says "Serial and v2.06". When I place it in the cradle, it changes to USB. I cannot boot it, I can't upgrade it ( connection error). What an I missing?
Click to expand...
Click to collapse
Do you have activesync 4.1 installed?
And beware that windows firewall may cause some problems too.. so turn it off before you start upgrading just to be sure.
one lesson learned from upgrading smartphones is to disable activesync:
task manager> end process wcescomm.exe and all ms office
>>disable anti virus and fire wall which also means disconnecting from the net. then try if flash is succesful
xykosomatik said:
one lesson learned from upgrading smartphones is to disable activesync:
task manager> end process wcescomm.exe and all ms office
>>disable anti virus and fire wall which also means disconnecting from the net. then try if flash is succesful
Click to expand...
Click to collapse
I remember closing those processes when I made my first flash... but look at the wiki from TuMa 1.2 for example:
"Flash the ROM.
* If your device is not recognized, make sure you use a fresh Windows XP SP2 or Windows 2000 SP4 installation with Active Sync 4.1."
But it's also true that it may not apply in this case. Anyway.. just trying to help.
This post is dedicated to all frustrated vista users.
I am also a vista home premium user and i use WIZARD.
All i cant do is upgrading Wizard in vista by any PROVEN METHOD.
And there are many like me.
So, i am using VMware workstation to upgrade my wizard and hermes mobile. I have done it many times without any problem.
VMware is a software to create virtual machines in it like Windows XP....
All you need is VMware and winXP cd.
link for VMware full version is:
warez link removed -- Try the free VMWare server version instead: http://www.vmware.com/download/server/ (register with VMWare for serial #)
first download it and install xp in it.It will not take any big space in your pc and you will also not need any partition or formatting.
After downloading it open it and select new virtual machine and install XP in normal way as we install on PC.
After installing install active sync 4.5 link:
http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx
Now in vista go to WMDC and disable usb connection.(it is not required)
goto VMware(remember that your curser is in vmware) and connect your wizard................and upgrade normally as you do it in XP.....
And ~~ENJOY~~
Any query is invited........thank you..........
vatsal1212 said:
This post is dedicated to all frustrated vista users.
I am also a vista home premium user and i use WIZARD.
All i cant do is upgrading Wizard in vista by any PROVEN METHOD.
And there are many like me.
So, i am using VMware workstation to upgrade my wizard and hermes mobile. I have done it many times without any problem.
VMware is a software to create virtual machines in it like Windows XP....
All you need is VMware and winXP cd.
link for VMware full version is: (torrent )
Poof
first download it and install xp in it.It will not take any big space in your pc and you will also not need any partition or formatting.
After downloading it open it and select new virtual machine and install XP in normal way as we install on PC.
After installing install active sync 4.5 link:
http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx
Now in vista go to WMDC and disable usb connection.(it is not required)
goto VMware(remember that your curser is in vmware) and connect your wizard................and upgrade normally as you do it in XP.....
And ~~ENJOY~~
Any query is invited........thank you..........
Click to expand...
Click to collapse
Remove the warez-link or this will be deleted.
I've updated the OP's post with a free version available from VMWare directly. If you have any questions as to why this was changed, please see the forum rules.
Hi,
I am folling the steps but the application doesn't seem to recognice the device, although in the screen i can see "USB" and in the device manager i can see the portable device detected....
Why the application can't recognice and start? Do i have to install windows xp?
The rom is C_ShekharWM6.1.1cR16.P32_public
Thanks
a little search wouldnt hurt my friend...Check out the last step 3 for info on upgrading via Vista
http://forum.xda-developers.com/showpost.php?p=2335142&postcount=11
Hello,
I have already moved to Windows 7, which is very stable and much faster then Windows Vista...
There are some problems with the Windows 7 and USPL...
Is there a configuration guide, which explains the procedure, how I can manage the USB connection problems within Windows 7.
Many Thanks
Roman
You need to update the USB drivers.
The following post will explain how. This works for Windows 7 aswell as Vista.
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
One thing to note, you have to put your phone in bootloader and connect it via USB for it to show the Mobile Device - HTC USB in Device Manager.
One laptop I was on I knew I had to apply the fix on so hadn't tried without updating, and took me forever to find out why I couldn't find the driver to update.
I used a small program called "Driver Signature Enforcement Overrider 1.3b".
Its freeware for using unsigned drivers in Windows 7.
I'm using Windows 7 x64 and USPL works perfect now.
Thanks
standish said:
You need to update the USB drivers.
The following post will explain how. This works for Windows 7 aswell as Vista.
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
Click to expand...
Click to collapse
Hello,
Had to upgrade my Windows 7 to build 7077 first....!
Then it worked @ 1st try... ;-)
Roman
I have problem with installing driver on Windows 7 64-bit (build 7077). I always get error: This device cannot start (Code 10). Does anyone have solution for it?
I had to get to 7077 as well, i couldnt make it start on 7057 or 7068 either.
I just solved it, but I can't explained how... I tried it again and again.. did some restart of HD and of Windows 7 and finally I was successfull . My tip is to re-connect HD on USB before installation...
I use 7077 x64 and no issues with it whatsoever. I had no issues at all with any build and actually it gets the drivers and Windows Mobile Device Center automatically for me. Check your system drivers like chipset and usb controller for updated versions maybe?
Thanks
Many thanks for the solution that you give to us.
I have been testing every release of Windows 7 since 7000 and as long as you install WMDC (Windows Mobile Device Center 6.1) and then update the HTC USB Sync driver (put your phone into bootloader and update the driver in device manager with the one from the guide in my signature) you won't have any issues flashing roms. This is for both 32 and 64-bit versions of Windows 7.
Dears,
Yesterday I got a HTC touch diamond. I'm very new user of windows mobile.
I'm getting trouble to install software in my windows mobile. for example when I try to install "skypemobile" it shows skypemobile is not a valid pocket pc application!!, When I try to install "total control" it shows skypemobile is not a valid pocket pc application. !!
Can u please guide me how to install them properly?
i have same problem with u bro...
i can't install in my computer n my pocket too using customruu.exe
have i install net framework version? n visual studio version?
i wanna upgrade my windows mobile too
exe based installers generally aren't run on the phone itself, what you do for them is connect your phone to your PC and make sure the phone is shown as connected in either ActiveSync (Windows XP and 2000) or Mobile Device Centre (Vista and Windows 7). You then run the exe file on your actual PC and ActiveSync/Mobile Device Centre will autopmatically handle the installation across onto the phone.
Thank You Medulla for your kind information