Hello,
I have already moved to Windows 7, which is very stable and much faster then Windows Vista...
There are some problems with the Windows 7 and USPL...
Is there a configuration guide, which explains the procedure, how I can manage the USB connection problems within Windows 7.
Many Thanks
Roman
You need to update the USB drivers.
The following post will explain how. This works for Windows 7 aswell as Vista.
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
One thing to note, you have to put your phone in bootloader and connect it via USB for it to show the Mobile Device - HTC USB in Device Manager.
One laptop I was on I knew I had to apply the fix on so hadn't tried without updating, and took me forever to find out why I couldn't find the driver to update.
I used a small program called "Driver Signature Enforcement Overrider 1.3b".
Its freeware for using unsigned drivers in Windows 7.
I'm using Windows 7 x64 and USPL works perfect now.
Thanks
standish said:
You need to update the USB drivers.
The following post will explain how. This works for Windows 7 aswell as Vista.
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
Click to expand...
Click to collapse
Hello,
Had to upgrade my Windows 7 to build 7077 first....!
Then it worked @ 1st try... ;-)
Roman
I have problem with installing driver on Windows 7 64-bit (build 7077). I always get error: This device cannot start (Code 10). Does anyone have solution for it?
I had to get to 7077 as well, i couldnt make it start on 7057 or 7068 either.
I just solved it, but I can't explained how... I tried it again and again.. did some restart of HD and of Windows 7 and finally I was successfull . My tip is to re-connect HD on USB before installation...
I use 7077 x64 and no issues with it whatsoever. I had no issues at all with any build and actually it gets the drivers and Windows Mobile Device Center automatically for me. Check your system drivers like chipset and usb controller for updated versions maybe?
Thanks
Many thanks for the solution that you give to us.
I have been testing every release of Windows 7 since 7000 and as long as you install WMDC (Windows Mobile Device Center 6.1) and then update the HTC USB Sync driver (put your phone into bootloader and update the driver in device manager with the one from the guide in my signature) you won't have any issues flashing roms. This is for both 32 and 64-bit versions of Windows 7.
Related
Hi,
I am folling the steps but the application doesn't seem to recognice the device, although in the screen i can see "USB" and in the device manager i can see the portable device detected....
Why the application can't recognice and start? Do i have to install windows xp?
The rom is C_ShekharWM6.1.1cR16.P32_public
Thanks
a little search wouldnt hurt my friend...Check out the last step 3 for info on upgrading via Vista
http://forum.xda-developers.com/showpost.php?p=2335142&postcount=11
Hi All,
I was trying to install Win 7 on my HTC Shift using the USB disk method. The installation goes well until it get to the last step configuring windows or your machine.... then it gives me an error, Installer was unable to configure windows to run on your hardware restart installation.
Any ideas why is that or how it can be resolved?
Thanks
There's the RTM version now available, check for Hash to be sure it's the real deal, and use the same install instructions. I recommed you use Windows Update before drivers, then install what is left because there's some new drivers like Authentec TrueSuite which is only downloadable through manufacturers. All works
mrabie said:
Hi All,
I was trying to install Win 7 on my HTC Shift using the USB disk method. The installation goes well until it get to the last step configuring windows or your machine.... then it gives me an error, Installer was unable to configure windows to run on your hardware restart installation.
Any ideas why is that or how it can be resolved?
Thanks
Click to expand...
Click to collapse
I'm running Win 7 RC for a while now on my shift... and everything is fine... I don't know what is the issue you have. maybe you should try to reinstall it and check if you have a correct version of Win 7 RC.
Team,
For those of you having trouble finding drivers here are some links.
64bit:
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x64.shtml
32bit:
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x86.shtml
For Linux and Mac the Android SDK drivers should work fine.
The standard Samsung USB driver that PDAnet had listed for the Samsung Moment worked for me as well, will give these new ones a try on my other system.
thank you
I added a link to this thread in the sticky
EDIT: Nevermind the n00b question. I was able to get the drivers installed and I am good to go.
cant get my cpu to recognize my phone after installing drivers... im on windows 7 64 bit any ideas??
skater4690 said:
cant get my cpu to recognize my phone after installing drivers... im on windows 7 64 bit any ideas??
Click to expand...
Click to collapse
have the same problem. i'm on 7, 32bit
did you enable USB debugging?
Gunnman from Galaxy S
yes of course. first thing I did after I rooted
I'm drunk so bear with me. go into device manager and browse for the driver manually ,include subdir. point to programfiles\samsung.
if that don't work use the 64bit drivers on 32bit windows. don't run setup just browse to the extracted dir from the unknown device in device manager. it worked for me at work. good night
Gunnman from Galaxy S
since i had issues w/ the 32bit driver exe, i extracted it and zipped it up incase others have the same issue.
http://rapidshare.com/files/408470448/Samsung_Usb_Drivers_x32.zip
this thread should be stickied since W7 doesn't come with the drivers, it seems.
How exactly do you update the drivers with win7? It keeps saying my drivers are up to date but I still can't get adb to recognize my vibrant
Beast84 said:
How exactly do you update the drivers with win7? It keeps saying my drivers are up to date but I still can't get adb to recognize my vibrant
Click to expand...
Click to collapse
Anyone?? I can't get get adb to recognize my device for the life of me
Try both 32bit and 64 bit drivers. At work I have 32bit win7 and the 64bit drivers fixed it up. Dont run setup just go through device manager chosse the unknown device and point it to the 64bit driver directory and check include sundirs.
Try using correct drivers for your win version but turn the phone off, connect and then power up while connected....worked fine for me after messing with both lots of drivers first and no luck
Make sure you select "USB debugging" for ADB to work folks.
Where can I get the mac driver..i looked everywhere please help
this thread is legit!
thanks for all of your help so far guys.. BUT i still cannot get my laptop to sync up with the phone properly (win xp pro, sp3)...
I've downloaded and installed both drivers and the computer is recognizing the external drives, but they are showing as removable disks E: and F:. when i double click to open, it is telling me to insert a disk? i feel like i'm almost there, but there is somethign i'm missing!
usb is mounted and usb storage is off. usb debugging enabled.
any help would be appreciated.
Windows drivers issue
Have you tried mounting the drives. Same thing happened to me when you have it connected to the computer drop down the usb notification and mount. The your drives should be accessible.
hello people,
i've installed windows xp sp2 with a step by step guide on xda (this one http://forum.xda-developers.com/showthread.php?t=436982) without problems.
At the end, when we have to install wlan drivers, i've noticed that marvell sdio sd8686 appear in the hardware list but there is also a yellow ! on this hardware with the error code number 10, windows cannot start hardware.
I've tried with some other drivers that i found on internet but with the same results. Someone can help me?
en_ky said:
hello people,
i've installed windows xp sp2 with a step by step guide on xda (this one http://forum.xda-developers.com/showthread.php?t=436982) without problems.
At the end, when we have to install wlan drivers, i've noticed that marvell sdio sd8686 appear in the hardware list but there is also a yellow ! on this hardware with the error code number 10, windows cannot start hardware.
I've tried with some other drivers that i found on internet but with the same results. Someone can help me?
Click to expand...
Click to collapse
Hi en_ky!
I was following the other installation method "Installing Windows XP with Windows Post Install (WPI)" that you can find on this forum, but basically should be the same.
Anyway, regarding WLAN on the WPI method it says:
"13. WLAN: Drivers are copied to c:\wlandrivers, install from there when you are asked for them later". This step is just before installing CYGWIN
After finishing with SwapResolution,
"Now it usually asks about the WLAN drivers, see step nr. 13."
"If it asks about drivers for Windows Mobile, just answer yes until it finishes."
"To get Wifi working, you have to copy the "copy HTC Shift XP Drivers\WLAN\sdbus.sys to c:\windows\system32\drivers\ say yes to the replace dialog and reboot."
"DO THIS IN SAFE MODE ONLY. This is how I got mine to work. I had the same problem with the yellow and not working wifi code 10 in the device manager."
"If you copy this without being in safe mode, it will not work because after the reboot the system will replace the overridden version with the old one again."
So check again all the steps and do the last one in Safe Mode (I think here is your problem)!
Good luck!
thank you for your reply,
I tried to resolve my problem with help of windows update and an eterneth connection for internet. At first it doesn't start with the same yellow ! But after a restart, it starts!!!!
Many thanks to you in any case; i know that your answer will be usefull for another person with this problem!
Hello Friends,
I need help on how i can connect the Dell Streak 7 3.2 HoneyComb to the computer.I have a new one just opened it but when i connect it using the USB to the Laptop with windows XP SP3 proffesional i dont see any device in My computer.
Please Please help me Team how do i make d device visible in my computer i knw this is new one and wouldn't have problems !!!
Is there something i need to install in windows XP SP3 proff so that it detects the device ..Is there any related drivers can i have the link so that i can install.
THnaks in advance
p.sandeepreddy said:
Hello Friends,
I need help on how i can connect the Dell Streak 7 3.2 HoneyComb to the computer.I have a new one just opened it but when i connect it using the USB to the Laptop with windows XP SP3 proffesional i dont see any device in My computer.
Please Please help me Team how do i make d device visible in my computer i knw this is new one and wouldn't have problems !!!
Is there something i need to install in windows XP SP3 proff so that it detects the device ..Is there any related drivers can i have the link so that i can install.
THnaks in advance
Click to expand...
Click to collapse
Why don't you take the time do first do some reading and find the drivers and then second team on how to install and use this email drivers.... If I give you the links you won't learn a thing but I can tell you they are here in so many different threads started by folks like you that wanted the info spoon fed to them that it goes me a headache..... So show some initiative
Sent from my cm_tenderloin using Tapatalk 2
Reply
I have done the reading about dell streak 7 "honey comb" and the user guide and also called up Dell,but could get a solution or clarity.for windows xp professional somehow i have installed downloaded files are "Fastboot+ADB " / InstallDellMSync /R291096 / syncup ..after installing all these still i dont see the device appearing in my computer...So confused so,after all that i have asked here...Help or links appreciated as i am not able to get the neck of it Sir!
p.sandeepreddy said:
I have done the reading about dell streak 7 "honey comb" and the user guide and also called up Dell,but could get a solution or clarity.for windows xp professional somehow i have installed downloaded files are "Fastboot+ADB " / InstallDellMSync /R291096 / syncup ..after installing all these still i dont see the device appearing in my computer...So confused so,after all that i have asked here...Help or links appreciated as i am not able to get the neck of it Sir!
Click to expand...
Click to collapse
If you installed Dell Sync correctly and the Fastboot and ADB drivers correctly the your problem is driver related.... Do you not see a yellow exclamation in your device manager for you to update the driver?
You should probably be install the Android SDK with the Google USB drivers also
Sent from my cm_tenderloin using Tapatalk 2
reply
Yes i saw and yellow xlamatory in device manager..Could you Please guide me what exactly i could download or from where ..like which version Android SDK and Google USB drivers ..
I believe you are trying to connect your Streak 7 to your computer so that you can transfer musics and files onto your Streak 7, right? If that is the case, Honeycomb does not support USB as mass disk device. You need to upgrade to Win 7 or use an app from the marketplace to do this.
Windows XP does not support MTP natively, you have to do a bunch of driver crap to get it to work.
giveen said:
Windows XP does not support MTP natively, you have to do a bunch of driver crap to get it to work.
Click to expand...
Click to collapse
You need the WMP11 runtimes (as that has MTP support).
Then you need the specific mtp driver for the S7, which is included in Fastboot+ADB.zip
It's much easier just to use an app and do a wireless transfer.
All HC and newer devices only officially support MTP
(at least that's what goog wants, new devices that dont support MTP are in the minority)
I believe the WMP11 runtimes are offered via windows update, the only thing you need to specifically download are the device specific mtp drivers.
(They're not even drivers per-se, you can force install a generic mtp driver and it'll work fine, but that's besides the point)
reply
Otnos
Yes,i was trying to connect my Streak 7 to computer that has windows XP professional,so that i can transfer musics and files onto Streak 7 honeycomb 3.2.
If i upgrade to Win 7 does the device show up in my computer ?
And if you say i need to use an app from the marketplace to do this. what is the App that i need to download on device ? and even if i download it on the device does that make the device recognizable on my computer on XP ?
Please, educate me as not always i have internet connection and would like to transfer files like music and books to the DS7 from a computer thats not on internet network.
Thanks
p.sandeepreddy said:
Otnos
Yes,i was trying to connect my Streak 7 to computer that has windows XP professional,so that i can transfer musics and files onto Streak 7 honeycomb 3.2.
If i upgrade to Win 7 does the device show up in my computer ?
And if you say i need to use an app from the marketplace to do this. what is the App that i need to download on device ? and even if i download it on the device does that make the device recognizable on my computer on XP ?
Please, educate me as not always i have internet connection and would like to transfer files like music and books to the DS7 from a computer thats not on internet network.
Thanks
Click to expand...
Click to collapse
If you have Win 7, just plug the DS7 in and it will be recognized as an MTP device in Windows Explorer or the Devices and Printers folder.
Or you can use an app like Wifi File Explorer or File Expert to wirelessly transfer file to/from your computer and your DS7. You need to have a Wifi network. Consult instructions and support through these apps on how to use them.
Yes I was able to see the DS7 in my computer on windows 7,and was able to transfer musica and movies but,when i transfer books they get transferred but not visible on the device unless i open them a App Called "Quick Office" where it shows all the loaded files on DS7,any idea how to get them as different folder or see them seperately ,Also i saw the drivers.zip but did not extract it as did not feel the use of it !is there a specif use of it!