Windows 7 RC on Shift? - Shift Development

Hi All,
I was trying to install Win 7 on my HTC Shift using the USB disk method. The installation goes well until it get to the last step configuring windows or your machine.... then it gives me an error, Installer was unable to configure windows to run on your hardware restart installation.
Any ideas why is that or how it can be resolved?
Thanks

There's the RTM version now available, check for Hash to be sure it's the real deal, and use the same install instructions. I recommed you use Windows Update before drivers, then install what is left because there's some new drivers like Authentec TrueSuite which is only downloadable through manufacturers. All works

mrabie said:
Hi All,
I was trying to install Win 7 on my HTC Shift using the USB disk method. The installation goes well until it get to the last step configuring windows or your machine.... then it gives me an error, Installer was unable to configure windows to run on your hardware restart installation.
Any ideas why is that or how it can be resolved?
Thanks
Click to expand...
Click to collapse
I'm running Win 7 RC for a while now on my shift... and everything is fine... I don't know what is the issue you have. maybe you should try to reinstall it and check if you have a correct version of Win 7 RC.

Related

USPL and Windows 7

Hello,
I have already moved to Windows 7, which is very stable and much faster then Windows Vista...
There are some problems with the Windows 7 and USPL...
Is there a configuration guide, which explains the procedure, how I can manage the USB connection problems within Windows 7.
Many Thanks
Roman
You need to update the USB drivers.
The following post will explain how. This works for Windows 7 aswell as Vista.
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
One thing to note, you have to put your phone in bootloader and connect it via USB for it to show the Mobile Device - HTC USB in Device Manager.
One laptop I was on I knew I had to apply the fix on so hadn't tried without updating, and took me forever to find out why I couldn't find the driver to update.
I used a small program called "Driver Signature Enforcement Overrider 1.3b".
Its freeware for using unsigned drivers in Windows 7.
I'm using Windows 7 x64 and USPL works perfect now.
Thanks
standish said:
You need to update the USB drivers.
The following post will explain how. This works for Windows 7 aswell as Vista.
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
Click to expand...
Click to collapse
Hello,
Had to upgrade my Windows 7 to build 7077 first....!
Then it worked @ 1st try... ;-)
Roman
I have problem with installing driver on Windows 7 64-bit (build 7077). I always get error: This device cannot start (Code 10). Does anyone have solution for it?
I had to get to 7077 as well, i couldnt make it start on 7057 or 7068 either.
I just solved it, but I can't explained how... I tried it again and again.. did some restart of HD and of Windows 7 and finally I was successfull . My tip is to re-connect HD on USB before installation...
I use 7077 x64 and no issues with it whatsoever. I had no issues at all with any build and actually it gets the drivers and Windows Mobile Device Center automatically for me. Check your system drivers like chipset and usb controller for updated versions maybe?
Thanks
Many thanks for the solution that you give to us.
I have been testing every release of Windows 7 since 7000 and as long as you install WMDC (Windows Mobile Device Center 6.1) and then update the HTC USB Sync driver (put your phone into bootloader and update the driver in device manager with the one from the guide in my signature) you won't have any issues flashing roms. This is for both 32 and 64-bit versions of Windows 7.

Easiest way ever to install win7 on shift

I had many difficulties to install windows 7 to my shift, maybe because of my USB stick. And then every guide was a little bit complicated - too many instructions, too many steps, too easy to make a mistake and then go back to the beginning..
Didn't want to buy an external dvd-drive either..
Anyway, all this before I found this article.
Check this out
Installing Windows 7 without using a DVD or USB via direct method - No USB stick required. No USB drive required
In this method we install Windows 7 on a clean partition like the normal DVD boot method. Only change is we don’t use a DVD drive in this guide. Please follow the below instructions carefully and don’t skip any steps to make things quickly!
1. Download the Windows 7 ISO files from Microsoft. I hope you have already downloaded one.
2. Download and install Virtual Clone Drive from http://www.slysoft.com/en/download.html
3. Firstly, go to the directory where you have saved Windows 7 ISO file. Right-click on the ISO file, select Open with and then select “Mount files with Virtual Clone Drive” to mount your ISO file.
4. Go back to My Computer (or Just Computer) and then double-click on the Virtual Clone Drive icon to start Windows 7 installation process.
Yes, you are installing Windows 7 without a DVD or USB drive!
5. Next, follow the normal Windows 7 installation procedure to finish the installation. Windows may restart during the install process. Worry not, everything will go fine.
From
http://www.intowindows.com/installing-windows-7-without-using-dvdusb-drive-method-2/
P.S Any good site to download NON-aero themes?
apoparis said:
P.S. Any good site to download free non-aero themes? Thanks in advance.
Click to expand...
Click to collapse
There already are some from microsoft availabale via the link in the personalize menu. Have you already downloaded those ?
Unfortunately those are aero themes, I'd like some NON-aero, to fit with both resolutions.
ok, now the short way to make a bootable USB Disk to install Vista/7
cmd
diskpart
list disk
select disk $ [where $ is the number of the USB Disk listed in the list disk command]
clean
create partition primary
select partition 1
active
format fs=ntfs quick label="InstallUSB"
assign
exit
exit
Copy the content of your Installation Disk on USB and boot from it, just simple as that
do this method install the new windwos over the existing windows, or on a new partition in HDD.
As far as I know, no version of windows allows installing of a new windows except from booting.
N_M_S said:
do this method install the new windwos over the existing windows, or on a new partition in HDD.
As far as I know, no version of windows allows installing of a new windows except from booting.
Click to expand...
Click to collapse
I just tried it out and it installs it over the existing running windows, doesn´t matter if it was downgraded to xp, or already upgraded to 7, it will install a new and fresh copy of Win 7 in your local drive, regardless of the existing vista recovery partion, which can be used in any time... (I hope to get ride of it once Win 7 final version comes out...)
When the installation is complete, a folder called "old windows" saves all the files from the preivous running operating system, bt since it´s over 10 GB, I suggest you erase it..
Win 7 is fantastic!! I have my shift now running both Internet Explorer 8 and Opera, Office Pro 2007, Skype, Live Messenger, Eset Smart Security 4, Adobe Reader, and more.... as smooth as butter
Great..............Shift on W7.
Please someone could tell me if the differences are big using W7 instead Vista.
So, it's a great solution to move Shift to run on W7, or not ?
I upgraded my hard drive then changed to windows 7 with a clean install. It is amazing how much better my shift runs now that it is on W7. It is really worth it to upgrade.
upgraded to windows 7 ultimate
Hi,
i upgraded to windows 7 ultimate and changed the drivers compitibility mode to windows vista service pack 1 and they all run smoothly but except the wifi and bluetooth, also the shag control doesn't run
would you please advise?
i am planning to buy the windows 7 upgrade
thanks for your help in advance
cadc82 said:
I just tried it out and it installs it over the existing running windows, doesn´t matter if it was downgraded to xp, or already upgraded to 7, it will install a new and fresh copy of Win 7 in your local drive, regardless of the existing vista recovery partion, which can be used in any time... (I hope to get ride of it once Win 7 final version comes out...)
When the installation is complete, a folder called "old windows" saves all the files from the preivous running operating system, bt since it´s over 10 GB, I suggest you erase it..
Win 7 is fantastic!! I have my shift now running both Internet Explorer 8 and Opera, Office Pro 2007, Skype, Live Messenger, Eset Smart Security 4, Adobe Reader, and more.... as smooth as butter
Click to expand...
Click to collapse
would you please help me in installing the drivers?
i have a problem with the VGA display driver (i can not increase the reslution), wifi and bluetooth.
hope to hear from you soon
Can someone pls give me the microsoft windows mobile 7 iso download link???...
I am still confused which iso file to download
abs_dear said:
Can someone pls give me the microsoft windows mobile 7 iso download link???...
I am still confused which iso file to download
Click to expand...
Click to collapse
Windows mobile 7?

Touch screen not working in shift

I have Installed windows 7 in my shift and evrey thing is working fine except the touch screen it,s not working
i have followd the instruction but still didn't work
any one can help me to make it working
regards
Try this Guide http://gadgetmix.com/index/how-to-install-windows-7-on-htc-shift-umpc/
The touchscreen does work on the Windows Mobile side, right?
khals said:
Try this Guide http://gadgetmix.com/index/how-to-install-windows-7-on-htc-shift-umpc/
The touchscreen does work on the Windows Mobile side, right?
Click to expand...
Click to collapse
thanks i got it working but i got another problem
if i update the display driver i get the blue screen and it keep on rebooting automaticly
any solution for this
regards
That's because AERO doesn't run at the moment at screen resolutions higher than 800*600.
Boot into SAFE MODE - Delete New Installed Graphic Card Drivers - Enable Windows 7 Classic theme in Windows and Reinstall drivers!
Can someone PLEASE reply ?
I am desperate. I deleted the HPA Partition in order to free up 3Gigs and installed Windows 7.
I followed all the tutorials, so i installed ECDriver (Vista Compatibility Mode + Run as Administrator) and Touch Screen Driver.
I mention that i see HTC Embedded Controller (in device manager) after installing ECDriver , but touch screen doesnt work (after installing touchscreen drivers) = No Pen or Touch Input is available for this Display
What am i doing wrong ?!?
I also had the same problem, so, I've installed the VGA driver from the package the way mentioned somewhere here and in the same order, as I think the new VGA driver installed with the Win7 installation is missing an important bit at the end of the installation. After that, and after a reboot, the touch started, but I did not get a calibration screen. Even without the calibration, the screen seemed to be fine. I've also disabled Aero just in case as I did not want any more blue screens.
So you have installed ECDriver, Touchscreen and VGADriver (WinVista Compatible & Run as Administrator) in this order ?
When i install VGADriver, i get a 'Cannot copy'. I thought the driver was corrupt and tried re-downloading it, but this didn't solve the situation.
How did you manage to install it ?!?
First I've installed just touchscreen driver and it did not work, so I've installed EC driver and then touchscreen and it also failed. So, I've added the VGA. I think it did not want to install with Vista compatibility so I think I forced it through with XP compatibility, got a message saying the driver was older than what I had installed, I said yes, please, go ahead! It then installed and at the end some CMD windows poped up and then closed and I then installed touch screen again. Nothing seemed to have happened then, so I've restared the computer, had all my fingers crossed (very, very technical!) and voilá, touch screen was there.
Thanks for the support. I tried several times, following exactely your steps, but i didn't manage to make it functional.
Unfortunately I had to go back to Windows Vista.
Now i have Windows 7 Vista Ultimate SP2, instead of the preistalled Windows Vista Business OEM.
Althought it's running ok, i am waiting for the final version of Windows 7 (not the RTM that i tried installing).
Win7 installed = 7 GB, Windows Vista Ultimate = 14 GB :|
Hi
Sorry to hear that it did not work for you. Like I~ve mentioned elsewhere, the only thing that did not work for me all the way is the sd card that keeps dropping from explorer.
Did I mention that I did not do a clean install? I've installed it as an upgrade and had all the functions (Wifi, BT, Phone) on while upgrading to avoid the problem some people have of the wifi connection going missing when upgrading(W7)/downgrading(XP). I've been busy at work so did not have time to use it much or test it some more.
Well, you missed to mention that
I tried a fresh install, after deleting the HPA partition (now i have 37GB Hdd, instead of 33).
Maybe that's why it didn't work for me...
A friend of mine gave my his Shift to try installing Win7 via Upgrade. Maybe it works.
BTW : Windows 7 Ultimate SP2 is running just perfect on Shift. Too bad it occupies 20GB (after drivers and updates)

GsensorR

Hello
I have developed a tool to rotate the screen and emulate a joystick using the accelerometer.
Everything here:
"webs.ono.com/shift/"
ATTENTION:
Only tested on XP
Regards
Great to find someone developing with Shift device in mind!
Unfortunately your link is not accessible right now! (wrong link? server down?)
GSensoR in Windows 7
Hi,
I try to install your application and driver. I follow it step by step till I finish to install first 2 file. But I struck on step to setting in control panel. I can not find "Game Devices" on my Windows 7 control panel. Could you suggest? I try to run last file (Gsensor). It pop up error that missing driver PPjoyIO.sys (if I'm not remember it wrong). Could you advice how to solve this problem. Thank in advance
unapproachable2kx said:
Great to find someone developing with Shift device in mind!
Unfortunately your link is not accessible right now! (wrong link? server down?)
Click to expand...
Click to collapse
server down,Sorry, try again
poltep said:
Hi,
I try to install your application and driver. I follow it step by step till I finish to install first 2 file. But I struck on step to setting in control panel. I can not find "Game Devices" on my Windows 7 control panel. Could you suggest? I try to run last file (Gsensor). It pop up error that missing driver PPjoyIO.sys (if I'm not remember it wrong). Could you advice how to solve this problem. Thank in advance
Click to expand...
Click to collapse
you must install it in xp compatibility mode
please read this:
"foro.todopocketpc.com/showthread.php?p=1536186"
regards
Ok tested so far so good joystick is working!
I also have irotate (winxp) video is rotating as yours!
Does it is supported under Win7 too?
Definitly recommended to all shift users!
thank you!
I can't install "GSensorR" on win 7 home premium
I'll give you my feedback everything works good but Gsensor is craching every time I resume from hibernation.
And I cannot make it run on windows 7.
Regards
Thanks for this excellent app! It's running fine on my Windows 7 installation, I just set it to XP compatibility mode during the installation process.
I got it working with WinUAE (Amiga Emulator) aswell
I cant make it run in windows 7 can you describe every step you did?
unapproachable2kx said:
I cant make it run in windows 7 can you describe every step you did?
Click to expand...
Click to collapse
I just used Google Translate to translate the guide into english and followed it to the point:
http://tinyurl.com/32ctocu and http://tinyurl.com/2v9o455
I set all three files to XP compatibility mode before running them though.
Let me know how it works out for you
Ok it works! Thanks pptan and khals! One question: how can I rotate screen in windows 7? Is it impossible?
Rotation for ours Intel GMA is disabled in windows 7 env. , I still need to understand if this lock is on drivers or Windows 7 registry.
Once unlocked it will work same as XP.
If some other is trying this please let us know here about some progress.
My actual test driver is 8.14.10.1930 on win7 ultimate
Does it work for Vista?
is there any way to run Gsensor.exe with rotation enabled first not joystick?
g-sensor & vista
Sheepster said:
Does it work for Vista?
Click to expand...
Click to collapse
not for the moment.
dlportio and ppjoy, both installed with no probs with winxp compatibility and as administrator.
virtual joy shows up in properties.
unfortunately try running gsensor-r brings up an error:
run-time error '6':
overflow
does anyone knows a way around this?
G.E.O. said:
not for the moment.
dlportio and ppjoy, both installed with no probs with winxp compatibility and as administrator.
virtual joy shows up in properties.
unfortunately try running gsensor-r brings up an error:
run-time error '6':
overflow
does anyone knows a way around this?
Click to expand...
Click to collapse
Run programs in "xp compatibility mode", it may help.
dannyt84 said:
Run programs in "xp compatibility mode", it may help.
Click to expand...
Click to collapse
No that didn't work.
I guess the problem is Vista... as always!

problem: Wlan on windows xp pro sp2

hello people,
i've installed windows xp sp2 with a step by step guide on xda (this one http://forum.xda-developers.com/showthread.php?t=436982) without problems.
At the end, when we have to install wlan drivers, i've noticed that marvell sdio sd8686 appear in the hardware list but there is also a yellow ! on this hardware with the error code number 10, windows cannot start hardware.
I've tried with some other drivers that i found on internet but with the same results. Someone can help me?
en_ky said:
hello people,
i've installed windows xp sp2 with a step by step guide on xda (this one http://forum.xda-developers.com/showthread.php?t=436982) without problems.
At the end, when we have to install wlan drivers, i've noticed that marvell sdio sd8686 appear in the hardware list but there is also a yellow ! on this hardware with the error code number 10, windows cannot start hardware.
I've tried with some other drivers that i found on internet but with the same results. Someone can help me?
Click to expand...
Click to collapse
Hi en_ky!
I was following the other installation method "Installing Windows XP with Windows Post Install (WPI)" that you can find on this forum, but basically should be the same.
Anyway, regarding WLAN on the WPI method it says:
"13. WLAN: Drivers are copied to c:\wlandrivers, install from there when you are asked for them later". This step is just before installing CYGWIN
After finishing with SwapResolution,
"Now it usually asks about the WLAN drivers, see step nr. 13."
"If it asks about drivers for Windows Mobile, just answer yes until it finishes."
"To get Wifi working, you have to copy the "copy HTC Shift XP Drivers\WLAN\sdbus.sys to c:\windows\system32\drivers\ say yes to the replace dialog and reboot."
"DO THIS IN SAFE MODE ONLY. This is how I got mine to work. I had the same problem with the yellow and not working wifi code 10 in the device manager."
"If you copy this without being in safe mode, it will not work because after the reboot the system will replace the overridden version with the old one again."
So check again all the steps and do the last one in Safe Mode (I think here is your problem)!
Good luck!
thank you for your reply,
I tried to resolve my problem with help of windows update and an eterneth connection for internet. At first it doesn't start with the same yellow ! But after a restart, it starts!!!!
Many thanks to you in any case; i know that your answer will be usefull for another person with this problem!

Categories

Resources