Database Develop

USPL and Windows 7

Hello,
I have already moved to Windows 7, which is very stable and much faster then Windows Vista...
There are some problems with the Windows 7 and USPL...
Is there a configuration guide, which explains the procedure, how I can manage the USB connection problems within Windows 7.
Many Thanks
Roman

You need to update the USB drivers.
The following post will explain how. This works for Windows 7 aswell as Vista.
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/

One thing to note, you have to put your phone in bootloader and connect it via USB for it to show the Mobile Device - HTC USB in Device Manager.
One laptop I was on I knew I had to apply the fix on so hadn't tried without updating, and took me forever to find out why I couldn't find the driver to update.

I used a small program called "Driver Signature Enforcement Overrider 1.3b".
Its freeware for using unsigned drivers in Windows 7.
I'm using Windows 7 x64 and USPL works perfect now.

Thanks
standish said:
You need to update the USB drivers.
The following post will explain how. This works for Windows 7 aswell as Vista.
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
Click to expand...
Click to collapse
Hello,
Had to upgrade my Windows 7 to build 7077 first....!
Then it worked @ 1st try... ;-)
Roman

I have problem with installing driver on Windows 7 64-bit (build 7077). I always get error: This device cannot start (Code 10). Does anyone have solution for it?

I had to get to 7077 as well, i couldnt make it start on 7057 or 7068 either.

I just solved it, but I can't explained how... I tried it again and again.. did some restart of HD and of Windows 7 and finally I was successfull . My tip is to re-connect HD on USB before installation...

I use 7077 x64 and no issues with it whatsoever. I had no issues at all with any build and actually it gets the drivers and Windows Mobile Device Center automatically for me. Check your system drivers like chipset and usb controller for updated versions maybe?

Thanks
Many thanks for the solution that you give to us.

I have been testing every release of Windows 7 since 7000 and as long as you install WMDC (Windows Mobile Device Center 6.1) and then update the HTC USB Sync driver (put your phone into bootloader and update the driver in device manager with the one from the guide in my signature) you won't have any issues flashing roms. This is for both 32 and 64-bit versions of Windows 7.

USB Tethering: How ?

The cyanogen rom 4.2.3 has USB tethering support, but I can not get it to work, mainly because of missing information/documentation.
In 'settings' 'wireless controls' there is a nice 'Internet tethering' option to switch it on. When I switch that on then my Windows XP PC shows an unknown device 'Andriod Phone' and would like to install drivers for it. Where can I get these drivers from ?
Markus

I would also like to know how the usb tethering works for a mac as well. Didnt find any information on that. Thanks in advance.

You may need to get the drivers from the Android SDK, but with regards to USB tethering, your phone should be recognised as an NDIS based network device and installed automatically by Windows. Not sure about XP, but it installs automatically on Vista and 7

Under Ubuntu Linux (from an end-user perspective), when a G1 is connected with USB tethering enabled, network manager connects as if the phone were a standard, ethernet connection.

Shane2 said:
You may need to get the drivers from the Android SDK, but with regards to USB tethering, your phone should be recognised as an NDIS based network device and installed automatically by Windows. Not sure about XP, but it installs automatically on Vista and 7
Click to expand...
Click to collapse
I have the Android SDK (1.6r1) and I point the driver install wizard at the usb_driver directory when he wants to install the device. Despite this the 'Found new Hardware' Wizard come up with 'Cannot install this Hardware'.
Markus

markusb said:
I have the Android SDK (1.6r1) and I point the driver install wizard at the usb_driver directory when he wants to install the device. Despite this the 'Found new Hardware' Wizard come up with 'Cannot install this Hardware'.
Markus
Click to expand...
Click to collapse
For xp you have to install drivers from htc sync software. Just google 'htc sync'. Should have been asked in q&a.

Nothing happens on Mac OS X 10.5.8 neither on 10.6.1

dumfuq said:
For xp you have to install drivers from htc sync software. Just google 'htc sync'. Should have been asked in q&a.
Click to expand...
Click to collapse
Isnt this Q&A? but I think this is it.... http://handheld.softpedia.com/progDownload/HTC-Sync-Download-81096.html
Im trying to get this to work also

I couldn't get it to work on my Windows XP SP2 computer at work. I get a code 10.

Guys, don't forget to use search! I've seen these issues brought up in at least 3 or 4 threads, and tons of posts.
bassderek said:
If you're running windows XP the driver isn't included on your computer. Some people have installed HTC Sync to get the drivers, personally I got them from this post:
http://forum.xda-developers.com/showthread.php?t=445436
I can confirm that the driver from that post works, I am using tethering with my laptop right now to write this post!
Click to expand...
Click to collapse

bassderek said:
Guys, don't forget to use search! I've seen these issues brought up in at least 3 or 4 threads, and tons of posts.
Click to expand...
Click to collapse
The search doesnt always give you what your lookin for if you dont word it a certain way man................
I think im gonna need a step by step.... I got the file... the computer recognizes the device.... But it doesn't register as a connection....

To everyone that is having problems tethering:
I was having the same issues. At first I wasn't able to get it to install, and then it would just keep saying the device couldn't start.
i found a very simple solution. I went into device manager, uninstalled all of my usb ports, and restarted my computer.
When it restarted, it automatically installed the usb drivers, and the tethering has worked ever since.

I could not get this to work either, finally after 3 days of messing with this on my work pc, I got it to work. First download htc sync from here http://www.htc.com/uk/SupportViewNews.aspx?dl_id=631&news_id=270 then unzip and install to your pc. Next tick on the option to usb tether while the phone is plugged in. It will say found Android phone Sdk or something like that. I did this on my xp pc at work that had no htc drivers previously installed. Next I went to my device manager and under network adapters you will see the yellow exclamation point, right click on that and update driver, 1st install from a specific location, 2nd Don't search I will choose driver to install. 3rd Have disk, 4th browse to C/program files/htc/htc driver/driver files/xp_86x then hit open and click ok. It might give a "stop warning" ignore it and continue. When its done installing you should be ready to go.....

badaphooko01 said:
I could not get this to work either, finally after 3 days of messing with this on my work pc, I got it to work. First download htc sync from here http://www.htc.com/uk/SupportViewNews.aspx?dl_id=631&news_id=270 then unzip and install to your pc. Next tick on the option to usb tether while the phone is plugged in. It will say found Android phone Sdk or something like that. I did this on my xp pc at work that had no htc drivers previously installed. Next I went to my device manager and under network adapters you will see the yellow exclamation point, right click on that and update driver, 1st install from a specific location, 2nd Don't search I will choose driver to install. 3rd Have disk, 4th browse to C/program files/htc/htc driver/driver files/xp_86x then hit open and click ok. It might give a "stop warning" ignore it and continue. When its done installing you should be ready to go.....
Click to expand...
Click to collapse
I'm so frustrated with this whole process. I've done every step you've outlined, and I still get a code 10 - cannot start the driver. And I still don't have USB tethering. What am I doing wrong?

nmw407 said:
I'm so frustrated with this whole process. I've done every step you've outlined, and I still get a code 10 - cannot start the driver. And I still don't have USB tethering. What am I doing wrong?
Click to expand...
Click to collapse
I had the same problem with Windows XP SP2. I installed SP3 and it started working flawlessly. What are you using?

Binary100100 said:
I had the same problem with Windows XP SP2. I installed SP3 and it started working flawlessly. What are you using?
Click to expand...
Click to collapse
eeepc 901 nlited XP SP2.
I'll try and push SP3 and retry again tonight. Thanks for the heads up.

nmw407 said:
eeepc 901 nlited XP SP2.
I'll try and push SP3 and retry again tonight. Thanks for the heads up.
Click to expand...
Click to collapse
That's your problem then. Yeah update to sp3 and you will be good. I promise.

I'm running into the same tethering trouble, but appear to meet all the criteria mentioned in this thread and other threads i've come across. the bottom line is i can connect with ADB access and mount my phone's SD card via the usb connection, but tethering doesn't work under several versions of Cyanogen on my laptop. currently I have CM 4.2.12.2 on my rooted Dream. I have windows SP3 installed (installed it twice because problem persisted). I've uninstalled all the USB ports per an above post, rebooted and plugged my phone in. The laptop reinstalls the USB ports, and finds the phone as an "ADB Interface" named "HTC Dream Composite ADB Interface". I can update the drivers with the google SDK USB drivers which makes the device an "Android Phone" named "Android Composite ADB Interface" instead. With either set of drivers installed, once I go to Settings on my phone and enable tethering, the device under windows goes away and instead i get yellow question mark "Other Devices" named Android Phone. I can try to force it to use the same USB drivers but it won't install them.
With tethering turned off, i can successfully type "adp devices" on my laptop console and see that my phone is there. once i turn tethering on, the same command shows no devices.
The Dream works with tethering just fine on my windows pc and shows up as a "Network adapter" named "Windows Mobile-based Internet Sharing Device".
My laptop is a compac presario in case that matters. what do i need to do on it to make tethering work?

just found the solution. a lot of posts were talking about installing microsoft active sync. sounded pointless considering it's an android phone, but it ends up being that the drivers for "windows mobile-based internet sharing device" are part of the active sync installation. i installed active sync, plugged in my phone, enabled tethering and then the laptop installed the correct drivers and it all worked without a hitch. hope this helps others!

hamx0r said:
just found the solution. a lot of posts were talking about installing microsoft active sync. sounded pointless considering it's an android phone, but it ends up being that the drivers for "windows mobile-based internet sharing device" are part of the active sync installation. i installed active sync, plugged in my phone, enabled tethering and then the laptop installed the correct drivers and it all worked without a hitch. hope this helps others!
Click to expand...
Click to collapse
+1
This is totally the problem. I spent hours trying different ways then finally googled it and came here

[Drivers] MS Windows x86 and x64 USB Drivers for Samsung Galaxy S

Team,
For those of you having trouble finding drivers here are some links.
64bit:
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x64.shtml
32bit:
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x86.shtml
For Linux and Mac the Android SDK drivers should work fine.

The standard Samsung USB driver that PDAnet had listed for the Samsung Moment worked for me as well, will give these new ones a try on my other system.

thank you
I added a link to this thread in the sticky

EDIT: Nevermind the n00b question. I was able to get the drivers installed and I am good to go.

cant get my cpu to recognize my phone after installing drivers... im on windows 7 64 bit any ideas??

skater4690 said:
cant get my cpu to recognize my phone after installing drivers... im on windows 7 64 bit any ideas??
Click to expand...
Click to collapse
have the same problem. i'm on 7, 32bit

did you enable USB debugging?
Gunnman from Galaxy S

yes of course. first thing I did after I rooted

I'm drunk so bear with me. go into device manager and browse for the driver manually ,include subdir. point to programfiles\samsung.
if that don't work use the 64bit drivers on 32bit windows. don't run setup just browse to the extracted dir from the unknown device in device manager. it worked for me at work. good night
Gunnman from Galaxy S

since i had issues w/ the 32bit driver exe, i extracted it and zipped it up incase others have the same issue.
http://rapidshare.com/files/408470448/Samsung_Usb_Drivers_x32.zip

this thread should be stickied since W7 doesn't come with the drivers, it seems.

How exactly do you update the drivers with win7? It keeps saying my drivers are up to date but I still can't get adb to recognize my vibrant

Beast84 said:
How exactly do you update the drivers with win7? It keeps saying my drivers are up to date but I still can't get adb to recognize my vibrant
Click to expand...
Click to collapse
Anyone?? I can't get get adb to recognize my device for the life of me

Try both 32bit and 64 bit drivers. At work I have 32bit win7 and the 64bit drivers fixed it up. Dont run setup just go through device manager chosse the unknown device and point it to the 64bit driver directory and check include sundirs.

Try using correct drivers for your win version but turn the phone off, connect and then power up while connected....worked fine for me after messing with both lots of drivers first and no luck

Make sure you select "USB debugging" for ADB to work folks.

Where can I get the mac driver..i looked everywhere please help

this thread is legit!

thanks for all of your help so far guys.. BUT i still cannot get my laptop to sync up with the phone properly (win xp pro, sp3)...
I've downloaded and installed both drivers and the computer is recognizing the external drives, but they are showing as removable disks E: and F:. when i double click to open, it is telling me to insert a disk? i feel like i'm almost there, but there is somethign i'm missing!
usb is mounted and usb storage is off. usb debugging enabled.
any help would be appreciated.

Windows drivers issue
Have you tried mounting the drives. Same thing happened to me when you have it connected to the computer drop down the usb notification and mount. The your drives should be accessible.

[Q] Computer wont recognize dell streak 7

Hello again. I am attempting to root my new dell streak 7, froyo 2.2.2 stock, wifi only device using gingerbreak. I was advised from another thread I posted to download gingerbreak using my computer then transfer the file to my Dell Streak 7, since my device would not download gingerbreak successfully. I have tried to do this but my Dell computer will not recognize my Streak. I am using a stock usb cable. When I plug it in the Windows Device Manager comes up and wants to search for drivers. I have allowed it, not allowed it and even told it not to search anymore. None of this has helped. Then my computer says there was a problem installing my device and it might not work properly. It still won't recognize my device as being plugged in at all, but my Streak does recognize that it has been plugged into the computer. USB debugging is on. All I want to do is get gingerbreak on my device so that I can root it and get rid of all the stock stuff that came with it originally. I have searched similar threads but they didnt have an answer or were not the exact thing I needed. Please help. Thank you in advance.

Your computer could not find the driver for the Streak. You need to go to Dell website and download the driver for you computer operating system. Here is the link:
http://support.dell.com/support/dow...dateid=-1&formatid=-1&source=-1&fileid=447160
After downloading the driver, unzip it to a directory in your pc. When you connect the Streak to the pc, windows will ask you for the driver. Make sure to enter the directory where you unzip the driver.

otnos said:
Your computer could not find the driver for the Streak. You need to go to Dell website and download the driver for you computer operating system. Here is the link:
http://support.dell.com/support/dow...dateid=-1&formatid=-1&source=-1&fileid=447160
After downloading the driver, unzip it to a directory in your pc. When you connect the Streak to the pc, windows will ask you for the driver. Make sure to enter the directory where you unzip the driver.
Click to expand...
Click to collapse
This is NOT true - If you're Dell Streak 7 has froyo 2.2.2 stock - it should recognize it automatically - just curious what version windows you're using...

Thanks! I am using win xp sp3. I really hope there is a fix because this is very frustrating. I did however get gingerbreak on the ds7 by dl'ing from the device while it was plugged in to my computer. Although i'm not sure if it is on the sd card or the device itself. It does show up on my device though. But I still need to hook up to computer for music xfer etc.

try dell's sync-up
UrbanAlkemist said:
Thanks! I am using win xp sp3. I really hope there is a fix because this is very frustrating. I did however get gingerbreak on the ds7 by dl'ing from the device while it was plugged in to my computer. Although i'm not sure if it is on the sd card or the device itself. It does show up on my device though. But I still need to hook up to computer for music xfer etc.
Click to expand...
Click to collapse
No problem - for media transfer between your pc and your dell streak 7 - have you tried using Dell's SyncUP? You will need to download from this website to your pc and there should be an app SyncUP on your stock dell streak 7...
http://dellsyncup.nero.com/enu/start/

UrbanAlkemist said:
Thanks! I am using win xp sp3. I really hope there is a fix because this is very frustrating. I did however get gingerbreak on the ds7 by dl'ing from the device while it was plugged in to my computer. Although i'm not sure if it is on the sd card or the device itself. It does show up on my device though. But I still need to hook up to computer for music xfer etc.
Click to expand...
Click to collapse
Have you tried the driver from Dell's link that I gave you? Yes, the computer should automatically recognize a device, but through my experience, nothing is perfect. That's why Dell posted the driver for people to download in case the computer did not recognize the Streak. In fact, here is Dell's description of this driver:
Set of USB drivers needed so Windows XP or Windows 7 can correctly identify the Streak & device when it is connected to a PC

otnos said:
Have you tried the driver from Dell's link that I gave you? Yes, the computer should automatically recognize a device, but through my experience, nothing is perfect. That's why Dell posted the driver for people to download in case the computer did not recognize the Streak. In fact, here is Dell's description of this driver:
Set of USB drivers needed so Windows XP or Windows 7 can correctly identify the Streak & device when it is connected to a PC
Click to expand...
Click to collapse
/agree
My streak when stock did not recognize properly either with win 7 x64. Even the drivers in the folder for win7 and vista 64 wouldn't work. I think I wound up using the xp 64 drivers using compatibility mode.
Hope this helps!!

otnos said:
Have you tried the driver from Dell's link that I gave you? Yes, the computer should automatically recognize a device, but through my experience, nothing is perfect. That's why Dell posted the driver for people to download in case the computer did not recognize the Streak. In fact, here is Dell's description of this driver:
Set of USB drivers needed so Windows XP or Windows 7 can correctly identify the Streak & device when it is connected to a PC
Click to expand...
Click to collapse
Man this is really getting me down. So I downloaded the file that you recommended from the link that you provided. After messing around for over an hour with the "dell download manager application," and about pulling my hair out over that worthless application. I finally just downloaded the file with my own browser (firefox 4.0). But it is a RAR file and does not give me the option to unzip it. I can pretty much download it to anyplace on my computer that I want but I downloaded it to the default which is my desktop. Then after running the device manager to install the ds7, my computer will not find the RAR file that I downloaded to the desktop. I have the option, as I said earlier, to download it into the existing dell drivers file that is on my computer but I actually have to put it in a file. There are several driver files listed there all starting with R and about 6 numbers after it, but I don't know which to put it in or if that is even what I should do. Suggestions?

After you have down'd the drivers from otmos's link on Sunday. Unzip the 16mb file to a suitable directory. Now when you install the drivers point the location to the Drivers folder in the directory that you unzipped ADB-Drivers.zip into and allow it to search for the correct file itself from there. Don't try to point to the individual sub directories.
Dell's SyncUP on it's own does not install the drivers.

Seriously? You have to go through hoops to get USB Mass Storage to work with the Dell Streak and Windows?
I just plug it in and tap the "Connect to computer" or whatever the screen is for starting mass storage. I rarely use it, but I did a few days ago to dump a few gigs of music over. Just worked in Linux..

khaytsus said:
Seriously? You have to go through hoops to get USB Mass Storage to work with the Dell Streak and Windows?
I just plug it in and tap the "Connect to computer" or whatever the screen is for starting mass storage. I rarely use it, but I did a few days ago to dump a few gigs of music over. Just worked in Linux..
Click to expand...
Click to collapse
..... he is referring to the adb drivers if im not mistaken ... that's for adb / fastboot This has nothing to do with mass storage mode.....

UrbanAlkemist said:
Man this is really getting me down. So I downloaded the file that you recommended from the link that you provided. After messing around for over an hour with the "dell download manager application," and about pulling my hair out over that worthless application. I finally just downloaded the file with my own browser (firefox 4.0). But it is a RAR file and does not give me the option to unzip it. I can pretty much download it to anyplace on my computer that I want but I downloaded it to the default which is my desktop. Then after running the device manager to install the ds7, my computer will not find the RAR file that I downloaded to the desktop. I have the option, as I said earlier, to download it into the existing dell drivers file that is on my computer but I actually have to put it in a file. There are several driver files listed there all starting with R and about 6 numbers after it, but I don't know which to put it in or if that is even what I should do. Suggestions?
Click to expand...
Click to collapse
rar files are a type of compressed file, similar to zip, you need to use a program like WinRAR to extract them. Windows will not recognize the drivers that are compressed in the rar file. Once you uncompressed them into a folder on your desktop, do the device manager to install the ds7 like before, and direct it to find the drivers in that uncompressed folder.

pyraxiate said:
..... he is referring to the adb drivers if im not mistaken ... that's for adb / fastboot This has nothing to do with mass storage mode.....
Click to expand...
Click to collapse
Perhaps he's just over complicating it then if he can't get adb to work, just get it on the SD card and install it.

Thanks so much everyone, finally got it working. Had to install drivers for Nero mobile sync and the Nero mobile sync application to my computer. Now recognizes and has a gui for moving and transferring files back and forth.
Tried to thank everyone but only allowed 5 a day.
Thanks again.

Problems with MTP drivers to get kindle connected to PC

I have a problem I have a kindle fire and getting the drivers installed is the problem
I have install the ADB driver but am having extreme difficulties getting the MTP drivers to work
I have tried everything (every solution on Google)
and nothing works
I've tried the "Media Transfer Protocol Porting Kit"
I tried to get Microsoft help they gave me the run around and confused me even more.
I tried to Go to Device Manager, under Portable Devices, right-click on MTP USB Device, and then click on Update Driver Software to update the MTP USB device driver. I then Selected “Browse my computer for driver software” to locate and install MTP USB device driver software manually.I then Selected “Let me pick from a List of device drivers on your computer”. A list will show installed driver software compatible with the device but I dont know what to pick
can someone help me please
is there an alternative solution to this Problem?

Try reading this thread, I tried to quote from it using my xda app for you and accidentally bumped it somehow...
http://forum.xda-developers.com/showthread.php?t=2309505
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

I tried what they said nothing worked
I cant Reinstall win7 because it is an OEM
I tried to install alternative driver for the MTP drivers the triangle went away or MTP error disappeared but I don't know if I choose the right one
I choose from a list
when I plug in the kindle a different message comes up
"some computers require a free file transfer utility to copy files between the computer and you kindle."
I have WMP the latest version
what do I need to get this working is there something I can download and install to override this issue.

Is your version of windows 7 a non us versions, because that's what I believe his issue is. Also your PC should have a windows 7 key on it so u can always reformat it, but you need a disk, and if you don't have one I can't really help you obtain one because I am not aware of if its illegal to DL stuff u already own off then internet and i would rather not get banned from this forum if it is. However if MTP is very important and u absolutely need it, go to ubuntu's website and download a desktop live CD, if you don't know your processor type juse 32 bit, but most modern PC's are 64 bit. Anyways if all goes well after burning it to a cd or making a bootable flash drive, u can boot into a live os and it should have mtp and u can transfer stuff. I on the other hand cannot do this because I use an older version of Ubuntu on a small partition and it is a pain to upgrade distros and I hate the new interface, but from what I have read the new versions of Ubuntu will work with your kindle. You can always install Linux along side windows but if you don't know a thing about resizing partitions, then i wouldn't suggest it because u might wipe your windows os and that would suck. BTW ubuntu is completely legal compared to what I was questioning above about windows. Yay Linux!!!
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

thanks
how do I check the status of my windows OS and I am running UBUNTU 12.04 alongside my windows OS
Im not that familar with Ubuntu as I would like to. I tried to sync my kindle to ubuntu, try to root my kindle and it was very complex
more than on windows

Funny, I find it easier to root on Ubuntu than on windows, no driver problems and then binary bash script works the same way. I am unfamiliar with "syncing" a kindle, especially on Ubuntu, I never sync mine I just use it like I would a flash drive, drag and drop files to it. Should work the name way on Ubuntu I think, I use an older version of Ubuntu that can't open it as an MTP device, so i just push and pull with adb. My only problem with helping you doing this on Ubuntu is your using 12.04, and I don't use the new ones because I don't like the new interface, i use gnome based desktop environment. So I can't exactly say where to click to open the kindle, but if I had to guess you can simply open a nautilus window from that bar on the left of the screen, any thing on it that's a folder will do, from there there should be a pane on the left if the window where the kindle would show up as a device u can click and view the contents of. I'm kinda basing this off what happens when I use a camera or iPod on mine, I assume kindle would show up the same way. If this is not the case you may have to install a package for an MTP browser, again not familiar with the interface and from what I remember trying it last time they took out the synaptic package manager by default, so I would have to tell u a command to run in a terminal to install it instead if need be. Tell me how it goes I will try to help as much as I can.
I kinda feel like I put too much information in this post...
Oh and as for telling your windows os, it may tell if you right click my computer( on start menu) and hit properties. Another way to throw a guess at it is ask yourself "Do you live in the USA?". Windows I think will say something about it in the properties of my computer though, if not you can try running winver from the run box it may display something useful. I don't have my PC booted up into windows right now so i can't verify this, and I kinda host a minecraft server on it in Linux most of the time so I don't shut it down unless I need to and its empty.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

Nastynate1219 said:
I have a problem I have a kindle fire and getting the drivers installed is the problem
I have install the ADB driver but am having extreme difficulties getting the MTP drivers to work
I have tried everything (every solution on Google)
and nothing works
I've tried the "Media Transfer Protocol Porting Kit"
I tried to get Microsoft help they gave me the run around and confused me even more.
I tried to Go to Device Manager, under Portable Devices, right-click on MTP USB Device, and then click on Update Driver Software to update the MTP USB device driver. I then Selected “Browse my computer for driver software” to locate and install MTP USB device driver software manually.I then Selected “Let me pick from a List of device drivers on your computer”. A list will show installed driver software compatible with the device but I dont know what to pick
can someone help me please
is there an alternative solution to this Problem?
Click to expand...
Click to collapse
Try this:
http://forum.xda-developers.com/showthread.php?t=2612503
It should help if you have the same problem I had.

mwhatsup said:
Try this:
http://forum.xda-developers.com/showthread.php?t=2612503
It should help if you have the same problem I had.
Click to expand...
Click to collapse
Registered just to say this is the solution to the issue as described above.
Thanks a bunch!

The answer to get a Kindle recognised by Widnows 7
plug kindle into pc
ignore unpleasant driver message
enter device manager and click the following:
update driver software
browse my computer for driver software
let me pick from a list of device drivers on my computer
select 'portable device' from the list
select 'standard mtp device' from the list
select 'mtp usb device' from the list
click next"

This worked after hours of trying to get my Kindle to work in windows 10!
Thanks @Achilles1783