Database Develop

trouble with ADB

I've been following mrkite38's nice guide here:
http://forum.xda-developers.com/showpost.php?p=5096501&postcount=17
I understand it completely, and have done similiar operations before. However I cannot get my phone to popup in device manager in any form. I here the bell that tells you a device has been connected, but nothing ever shows up, no notification, nothing.
Any ideas? thanks guys

Is USB debugging enabled inside android?

mrkite38 said:
Is USB debugging enabled inside android?
Click to expand...
Click to collapse
Yes and also stay awake

I've never had any luck with ADB also. I'm running Win 7 64 bit. I've tried all types of things LOL

Reddog80p said:
I've never had any luck with ADB also. I'm running Win 7 64 bit. I've tried all types of things LOL
Click to expand...
Click to collapse
same - maybe it's win7 is the problem. I've had problems with it on winmo as well. I'll try my parents pc sometime (xp)

i cant get it to work right on vista either. never have.

does your device ever show up in device manager? I can't even do that...

berardi said:
does your device ever show up in device manager? I can't even do that...
Click to expand...
Click to collapse
I got it to work on win 7 64 bit. It was a pain, actually I only got it to work on my laptop and not my desktop both with win 7 64 bit.
So normally when you plug in the android phone, 2 things pop up in device manager as Android phone, however one of them always trys to load a driver of a disk drive (probably set up to transfer stuff) however whenever that device is enabled with the driver adb wont work. So what I had to do was, especially b/c win 7 is a bit odd for automatically installing any driver it want with out input from up I had to disable that.
Start run gpedit.msc
in there go to Admin Templates > system > Driver installation > Driver instillation restriction. Enable both "Allow admin to override device installation restriction policies" and "Prevent installation of devices not described by other policy settings"
Ok after doing that you want to get rid of the drivers it tried to put in, so in device manager uninstall them, also download and run usbdeview, and remove the HTC drivers from there too. Might have to restart?
Now the drivers i used for adb was from proxoid, there are 32 bit and 64-bit versions there for you and it seemed to work
So d/l that, plug you phone in and in device manager manually set the drivers, you know right click deceive, update drivers, let me choose, choose form list, have disk etc.
Now the only pain with this method is that when you plug in another device, you have to go to device manager and install the driver from there either by using windos update or manually. If you take off those policies we changed earlier, windows in its great wisdom will reinstall non-working drivers.
Like i said worked on 1 comp not the other.
Good luck.

[Drivers] MS Windows x86 and x64 USB Drivers for Samsung Galaxy S

Team,
For those of you having trouble finding drivers here are some links.
64bit:
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x64.shtml
32bit:
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x86.shtml
For Linux and Mac the Android SDK drivers should work fine.

The standard Samsung USB driver that PDAnet had listed for the Samsung Moment worked for me as well, will give these new ones a try on my other system.

thank you
I added a link to this thread in the sticky

EDIT: Nevermind the n00b question. I was able to get the drivers installed and I am good to go.

cant get my cpu to recognize my phone after installing drivers... im on windows 7 64 bit any ideas??

skater4690 said:
cant get my cpu to recognize my phone after installing drivers... im on windows 7 64 bit any ideas??
Click to expand...
Click to collapse
have the same problem. i'm on 7, 32bit

did you enable USB debugging?
Gunnman from Galaxy S

yes of course. first thing I did after I rooted

I'm drunk so bear with me. go into device manager and browse for the driver manually ,include subdir. point to programfiles\samsung.
if that don't work use the 64bit drivers on 32bit windows. don't run setup just browse to the extracted dir from the unknown device in device manager. it worked for me at work. good night
Gunnman from Galaxy S

since i had issues w/ the 32bit driver exe, i extracted it and zipped it up incase others have the same issue.
http://rapidshare.com/files/408470448/Samsung_Usb_Drivers_x32.zip

this thread should be stickied since W7 doesn't come with the drivers, it seems.

How exactly do you update the drivers with win7? It keeps saying my drivers are up to date but I still can't get adb to recognize my vibrant

Beast84 said:
How exactly do you update the drivers with win7? It keeps saying my drivers are up to date but I still can't get adb to recognize my vibrant
Click to expand...
Click to collapse
Anyone?? I can't get get adb to recognize my device for the life of me

Try both 32bit and 64 bit drivers. At work I have 32bit win7 and the 64bit drivers fixed it up. Dont run setup just go through device manager chosse the unknown device and point it to the 64bit driver directory and check include sundirs.

Try using correct drivers for your win version but turn the phone off, connect and then power up while connected....worked fine for me after messing with both lots of drivers first and no luck

Make sure you select "USB debugging" for ADB to work folks.

Where can I get the mac driver..i looked everywhere please help

this thread is legit!

thanks for all of your help so far guys.. BUT i still cannot get my laptop to sync up with the phone properly (win xp pro, sp3)...
I've downloaded and installed both drivers and the computer is recognizing the external drives, but they are showing as removable disks E: and F:. when i double click to open, it is telling me to insert a disk? i feel like i'm almost there, but there is somethign i'm missing!
usb is mounted and usb storage is off. usb debugging enabled.
any help would be appreciated.

Windows drivers issue
Have you tried mounting the drives. Same thing happened to me when you have it connected to the computer drop down the usb notification and mount. The your drives should be accessible.

[Q] Captivate USB problems

Hi everyone,
I have an AT&T Captivate SGH-i897 (2nd hand) and i can't mount the phone to my laptop (winXP 32bit). When i plug in the cable to the phone and then the PC i get the "device not recognized".I've donwloaded the Samsung drivers from the xda wiki page and extracted them and tried to update the driveres via Device Mng ,but didn't work.Also dl'ed the Samsung drivers 5.0.x instaled ,and still nothing.USB Debugging is on...
So to recap,my top can't recognize the phone('s internal sd card) so plz help ???????

Try this, go into usb settings and choose "mass storage"
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

install kies

I would also recommend trying to fully uninstall all the drivers that associated on your pc with your phone (samsung or otherwise), and then reinstall the drivers before you plug in your phone. Then try to reconnect.

Just covering the basics. Assuming your phone is working correctly.
You have tried multiple USB ports on your computer, particularly those on the back if it's a desktop.
You have installed correct drivers (x86 or x64)
" for the correct operating system.
You have uninstalled the drivers before trying to reinstall.
You've tried to get Windows/ Mac to find them online (assuming you're using versions of OS that support doing that)
You've first tried Kies mini before full version, uninstalling in between. (Kies full version isn't supported for US, there are workarounds, but that's a different discussion)
On the phone you tell the phone to connect 'USB storage' (from the pull down menu after connected or in the settings)

I too am having problems with USB connectivity on a notebook with Win7/64. The usual failure mode is Windows not recognizing the USB device. I have followed ZBigT's basics, step by step and still cannot connect.
FWIW, my registry is awash with Samsung entries, some of which cannot be deleted.
I've even tried the AIO Toolbox application (to install the 64 bit drivers) to no avail.
Any other tips?

Is usb debugging turned off?

o hey guys sry for keeping u waiting,
i menaged to install ginger ,
the problem was my lap....rusty old bucket!!!!
had my friend come over with his lap and it worked like a charm ,
the problem is now i need a new one ;(,
damn

mrhaley30705 said:
Is usb debugging turned off?
Click to expand...
Click to collapse
Yes. Still no love. Have tried:
usb_drivers_GalaxyS_x64
SGH-i897_Captivate_USB_Drivers_5_02_0_2
mini-KIES
Kies
AIO
uninstalling reinstalling each time
When I plug in the Captivate, any of 3 USB ports on the laptop, Windows gives the "Unrecognized Device..." message.

Go to settings/about phone. Look at the very bottom to see what rom you are running.

mrhaley30705 said:
Go to settings/about phone. Look at the very bottom to see what rom you are running.
Click to expand...
Click to collapse
Paragon RC6.0
FWIW, I also have a Win7/64 desktop with the usb_drivers_GalaxyS_x64 installed and that works fine; can connect see "drives", use ODIN, adb commands etc.
It just the notebook, which I would like to be able to use to connect, especially when I travel, which has issues.

mabovalu said:
Paragon RC6.0
FWIW, I also have a Win7/64 desktop with the usb_drivers_GalaxyS_x64 installed and that works fine; can connect see "drives", use ODIN, adb commands etc.
It just the notebook, which I would like to be able to use to connect, especially when I travel, which has issues.
Click to expand...
Click to collapse
Check in program files for a Samsung folder. There may be remnants from old drivers that need to be manually deleted.

mrhaley30705 said:
Check in program files for a Samsung folder. There may be remnants from old drivers that need to be manually deleted.
Click to expand...
Click to collapse
Thanks for sticking with this. I was able to connect. I as focused on the Registry remnants, but your advice to clear out the Samsung folder in Programs worked. Thank you.
Additional comments: I am now running the Dlev ROM, it's OK, but when I plugged in the USB cable, just to the phone, it launched the Alarm Clock app! So I deleted that.
Then on the first of my four USB ports I got a USB driver failure to install, then the Windows Unrecognized USB device on ports 2 & 3. On port 4 it worked. (This is a Lennovo/Thinkpad notebook.)
I used the usb_drivers_GalaxyS_x64 package as that also worked on my desktop.
Thank you very much.

[Q] windows driver issues for vivid

I'm fairly new to android and i was wanting to root my htc vivid but it will not connect to my computer. I first plugged it in and the windows device manager installed a driver that just said unknown device. so i went and downloaded the htc sync software but even that won't recognize the vivid. I'm at a total loss and need direction.

Drivers at htc
Did you try the drivers at developer.htc.com ?
Page 4 from "Kernel Source code"

Download ADB http://developer.android.com/guide/developing/tools/adb.html

Choose Connection Type
When you connect your Vivid to the PC via the USB cable, you should see a screen asking what type of connection you want - charging only, disk drive, sync, etc. If you are not trying to actually sync data, just select disk drive and the tap the Done button at the bottom. You can then see the internal storage (and the "external" SD card if you have one installed). This can be done even if HTC Sync does not work.
If you don't see the connection type screen, go into Settings and tap on Connect to PC. Check the Ask Me box so you will be prompted the next time you plug in the USB cord.
As to HTC Sync, see my posting elsewhere in this forum about HTC Sync not working. In my opnion, it's not a very good program.
As for the driver, you may need to uninstall the driver if you can. Then uninstall and re-install HTC Sync to get the correct driver.

gubbels214 said:
I'm fairly new to android and i was wanting to root my htc vivid but it will not connect to my computer. I first plugged it in and the windows device manager installed a driver that just said unknown device. so i went and downloaded the htc sync software but even that won't recognize the vivid. I'm at a total loss and need direction.
Click to expand...
Click to collapse
I had similar issues trying to install the ICS update. Some searching lead me to this post that had just the drivers I needed.
-Brett.

I've tried the drivers from that post before and still no dice. And when I connect my phone it never asks for connection type even when I have it checked. I'm still in the same boat
Sent from my HTC PH39100 using XDA

zzoinks said:
I had similar issues trying to install the ICS update. Some searching lead me to this post that had just the drivers I needed.
-Brett.
Click to expand...
Click to collapse
Exactly what he said, Windows Vista didn't tell me any drivers were required (in charge only mode), but I had to install the XP drivers from that link before the RUU would proceed past the very first step. After I did that it worked fine.
Just unzip the drivers to a folder and when Windows tells you it can't find drivers, tell it to look there.

Ok I have the same issue but windows doesn't tell me it can't find drivers it just sits there. So how di I get it to accept the drivers?
ransack said:
Exactly what he said, Windows Vista didn't tell me any drivers were required (in charge only mode), but I had to install the XP drivers from that link before the RUU would proceed past the very first step. After I did that it worked fine.
Just unzip the drivers to a folder and when Windows tells you it can't find drivers, tell it to look there. I have the files downloaded to my root directory (Win 7)for now.
Click to expand...
Click to collapse

I found the drivers for windows by going thru the at&t website... Then once I installed the HTC sync software (yes I know it doesn't work) and ran it... It told me there was a new version... I installed that and like magic it finally knew it was there...
Sent from my HTC PH39100 using Tapatalk

HTC has new drivers that work when the old drivers did not. HTC SYNC from htc.com Load in Windows7 and they will run in the background.
read the posts above to set your phone correctly and you should be good to go. Gary

Cannot Get Drivers Installed for Windows 8.1 - Manual Installation or SDK

I cannot possibly figure out what the heck is causing my Windows 8.1 Installation to not detect my Nexus 6. Google comes up with TONS of results for this issue, but all troubleshooting points to what I have already done.
Plug it in, comes up as "Nexus 6" under "Other Devices" in Device Manager. With the little Yellow ! mark.
Downloaded the USB drivers from here - http://developer.android.com/sdk/win-usb.html attempted to install them and I get an error message. After selecting the folder that contains the driver.
"Windows was unable to install your Nexus 6: Windows could not find the driver software for your device. If you know the manufacturer of your device, you can visit its website and check the support section for driver software"
What I have Tried:
- Installing Drivers with USB Debugging ON and OFF
- Installing Drivers with Connection set to MTP and PTP on the phone
- Disabled Driver Signature Enforcement and attempted to install.
- Downloading Drivers a second time to ensure no corruption was in the file.
- Attempted to install via Android SDK (This appears to work per SDK software, but Device Manager shows no change, and the nexus isnt showing up in Explorer.)
- Tested Nexus on another Device. (Running Windows 7. Literally Plug and play No manual Installation needed. Worked)
I'm at total Loss here, Any other Ideas?

@morbid_bean,
Did you try the Motorola Device Manager >https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481

Thanks for the reply. Unfortunately that seems to have done nothing

I'd go w/ uninstall all other drivers first, change cables and see what happens.

Try this:
1) Download the driver from the link in your post, and unzip the files to any location;
2) Open Device Manager on your PC and turn on the option to "Show hidden devices" from the View menu;
3) Right click on EVERY item that could potentially relate to your device (e.g., adb interface, composite interface, motorola, nexus, etc.) and uninstall, including deleting the driver.
4) With USB Debugging set to OFF, plug your device into your PC. Windows should automatically install the MTP driver and It should be recognized;
5) Now turn USB Debugging ON;
6) Go back into Device Manager, right click on your device and select "Update driver software";
7) Select "Browse my computer...", NOT "Search automatically...";
8) Click "Browse", and locate the driver you downloaded in step 1.
EDIT: I don't think you have to disable Driver Signature Enforcement, but if it gives you issues, try disabling it.

morbid_bean said:
Thanks for the reply. Unfortunately that seems to have done nothing
Click to expand...
Click to collapse
This is a long shot, but you did install the Java JDK, right?

cam30era said:
This is a long shot, but you did install the Java JDK, right?
Click to expand...
Click to collapse
You do not need the JDK to install the drivers...

efrant said:
You do not need the JDK to install the drivers...
Click to expand...
Click to collapse
I understand. OP has diagnosed his problem as drivers, but if his problem is ADB not connecting to his N6, it could be the problem. As I said, it's a long shot.

OP Here with a status update.
Continued to try some other suggestions. Such as another Cable, another USB port, reboots. Hell I seriously went as far as a whole Windows 8.1 Re-install. I had some feeling that possibility because I am rooted its causing issues; so I even went as far as taking my old Nexus 4 and reverted it to 100% stock to attempt to install the drivers and then trying the nexus 6. But I got same results.
efrant said:
Try this:
1) Download the driver from the link in your post, and unzip the files to any location;
2) Open Device Manager on your PC and turn on the option to "Show hidden devices" from the View menu;
3) Right click on EVERY item that could potentially relate to your device (e.g., adb interface, composite interface, motorola, nexus, etc.);
4) With USB Debugging set to OFF, plug your device into your PC. Windows should automatically install the MTP driver and It should be recognized;
5) Now turn USB Debugging ON;
6) Go back into Device Manager, right click on your device and select "Update driver software";
7) Select "Browse my computer...", NOT "Search automatically...";
8) Click "Browse", and locate the driver you downloaded in step 1.
EDIT: I don't think you have to disable Driver Signature Enforcement, but if it gives you issues, try disabling it.
Click to expand...
Click to collapse
When I follow these steps I was successfully able to install drivers for something called "Android Composite ADB Interface"; "MTP" or "Nexus 6" was still failing. Even after switching debugging on. I still unfortunately do not see anything in Explorer that I can access the Nexus 6's files. Maybe this is an indicator that I am getting closer?
cam30era said:
This is a long shot, but you did install the Java JDK, right?
Click to expand...
Click to collapse
When I installed Android SDK, it told me I needed JDK before proceeding with the installation. So I'm pretty sure I did this.

morbid_bean said:
When I follow these steps I was successfully able to install drivers for something called "Android Composite ADB Interface"; "MTP" or "Nexus 6" was still failing. Even after switching debugging on. I still unfortunately do not see anything in Explorer that I can access the Nexus 6's files. Maybe this is an indicator that I am getting closer?
Click to expand...
Click to collapse
I just realized that the last part on my step 3 was cut off. It should read:
3) Right click on EVERY item that could potentially relate to your device (e.g., adb interface, composite interface, motorola, nexus, etc.) and uninstall, including deleting the driver.
As far as your issue, I'm pretty sure that Windos recognizes the N6 as an MTP device (assuming you have it on MTP) without any additional drivers, so I'm not sure what the problem is. My steps were to get the ADB driver installed, which seems to have worked. (ADB allows you access to your files via command line...)
Sent from my Nexus 6 using Tapatalk

FIXED IT!
I am running a version of Windows 8.1 known as Windows 8.1 Pro N Essentially this is a slightly stripped down version and does not include "Windows Media Player or other Windows Media-related technologies, such as Windows Media Center and Windows DVD Maker" I managed to get this copy really cheap.
More Info Here
So essentially I needed to download THIS Pack/Update which gave me these special features. Including the resolution of my Driver Problem. Rebooted the computer plugged in my phone and it was detected and installed drivers automatically.
Special Credit to THIS thread for helping me with the answer. I hope this can be added to any Driver Installation Guide or Sticky to assist others that may come across this problem.

Glad you got it resolved. I've never heard of Pro N. Another wrinkle in the Windows 8.1 driver issues, it seams.

Recently I have been deving on a friends nexus 6 with 5.1.1 on it all drivers are installed properly device shows in adb i even get adb root successful but it refuses to adb remount for testing purposes even on roms that have modified boot.img's with init.d in them and ro.secure=0 set and adb persistance is also set so there is no reason for it not to mount. I imagine there could be a problem with it mounting system on boot but I am new to aosp 5.1.1 roms and this solution did not work for me it tells me the windows 8.1 version I'm running is not applicable for this update? So if anyone can lend some assistance it would be much appreciated.
The Nexus 6 is VZW unlocked bootloader and rooted twrp recovery all the latest
currently any rom i try i cant mount through adb so testing for themes is impossible?

Pneuma1985 said:
Recently I have been deving on a friends nexus 6 with 5.1.1 on it all drivers are installed properly device shows in adb i even get adb root successful but it refuses to adb remount for testing purposes even on roms that have modified boot.img's with init.d in them and ro.secure=0 set and adb persistance is also set so there is no reason for it not to mount. I imagine there could be a problem with it mounting system on boot but I am new to aosp 5.1.1 roms and this solution did not work for me it tells me the windows 8.1 version I'm running is not applicable for this update? So if anyone can lend some assistance it would be much appreciated.
The Nexus 6 is VZW unlocked bootloader and rooted twrp recovery all the latest
currently any rom i try i cant mount through adb so testing for themes is impossible?
Click to expand...
Click to collapse
Have you tried this:
http://forum.xda-developers.com/showthread.php?t=2588979

Evolution_Freak said:
Have you tried this:
http://forum.xda-developers.com/showthread.php?t=2588979
Click to expand...
Click to collapse
My question is: Why would old google universal adb drivers work when everyone else says to use the new google usb drivers in tandem with the Motorola drivers for vzw? Thats the only reason i didnt use the tool is b/c its outdated?

Pneuma1985 said:
My question is: Why would old google universal adb drivers work when everyone else says to use the new google usb drivers in tandem with the Motorola drivers for vzw? Thats the only reason i didnt use the tool is b/c its outdated?
Click to expand...
Click to collapse
But alas! It does work, I've tested it myself. Also, you can install the most recent drivers optionally.

Evolution_Freak said:
But alas! It does work, I've tested it myself. Also, you can install the most recent drivers optionally.
Click to expand...
Click to collapse
I just tested it and it does not work i still get permissions denied when i try to remount it.

Pneuma1985 said:
I just tested it and it does not work i still get permissions denied when i try to remount it.
Click to expand...
Click to collapse
I don't usually recommend toolkits but you could try this:
http://forum.xda-developers.com/showthread.php?t=2947452

Evolution_Freak said:
I don't usually recommend toolkits but you could try this:
http://forum.xda-developers.com/showthread.php?t=2947452
Click to expand...
Click to collapse
Yup that didnt work either. I get su in adbshell it shows me # so there is su i just dont get why it wont mount at all or pull or push obviously cant do that if it won't mount. And no tutorial I've followed nor solution has worked thus far. As stated above that solution worked for him with windows media center or whatever but that doesnt apply to me. I've done this hundreds of times with many many many devices on windows 7 I've even done it with 3 devices on 8.1 so far no problems this is the only one to give me issues like this.
It's always a bit of messing around with it to get it to work but this is different i have spent hours going back and forth removing all drivers installing new ones using tools etc.