Database Develop

{SOLVED-HARDWARE} USB "DEVICE NOT RECOGNIZED" - After SRE, ADW, etc.

Well, I spent the last week or so having all sorts of creative fun with my new Captivate. Unfortunately, I was having the random shutdown issue, so I decided to remove SRE, SU, etc, using ODIN to restore my phone back to stock and get it exchanged for a new one.
I came home with my new phone today and proceeded to start the customization process all over. Before I did anything serious, I connected my new Captivate to my desktop, to both charge the battery and to sync with outlook using Kies.
With a full battery and my contacts loaded, I moved on the rooting and installing SRE. I then installed a bunch of apps, including ADW, ShopSavvy, and a bunch of games.
I then tried to get on the Market to download a few more apps. I forgot to 'emulate' T-Mobile to get around the AT&T censorship, so I fired up MarketAccess. I got an error message saying that MarketAccess couldn't get SU privs. That made no sense, since the phone was rooted, and SRE installed SuperUser. I downloaded the latest copy of Superuser and installed that. The SU problem was now fixed. (Turns out there was a glitch in the SRE I used. Designgears quickly fixed the zip file, but I was already using the glitchy one.)
Anyway, after loading a slew of apps/games, I plugged the phone back into the desktop to charge the battery some more. I got two error messages, one on the phone, and one on the desktop.
The phone complained that it was not on an 'idle' screen, since ADW was running. Since I had set ADW to be the default launcher, I used TitaniumBackup to temporarily uninstall ADW. (I couldn't figure out how to stop ADW and set TW back to the default.)
The desktop is more or a serious problem. I am now getting an info bubble saying that the USB DEVICE IS NOT RECOGNIZED.
The correct USB drivers are installed. I've used them to ODIN my previous phone back to stock. And they were working fine before I added SRE, ADW, etc.
I've uninstalled and reinstalled the drivers. Didn't help.
I tried USB Debugging, on and off. Didn't help.
I tried the age-old trick of unplugging the desktop and leaving it unplugged for 30 minutes. Didn't help.
So, here are my questions:
1) Does anyone know how to correct the DEVICE NOT RECOGNIZED error?
2) If not, is there anyway for me to restore the phone to stock without USB connectivity?
The phone still functions fine, just no USB. I was able to download the new SRE (with SuperUser fixed) using Dolphin browser. I then used My Files to rename and move the zip file to the root directory, and was able to install it fine. Is this same approach possible to restore to stock?
Thanks in advance...

Uninstall the usb drivers. Not sure what there called when kies installs it

fivebraids said:
Well, I spent the last week or so having all sorts of creative fun with my new Captivate. Unfortunately, I was having the random shutdown issue, so I decided to remove SRE, SU, etc, using ODIN to restore my phone back to stock and get it exchanged for a new one.
I came home with my new phone today and proceeded to start the customization process all over. Before I did anything serious, I connected my new Captivate to my desktop, to both charge the battery and to sync with outlook using Kies.
With a full battery and my contacts loaded, I moved on the rooting and installing SRE. I then installed a bunch of apps, including ADW, ShopSavvy, and a bunch of games.
I then tried to get on the Market to download a few more apps. I forgot to 'emulate' T-Mobile to get around the AT&T censorship, so I fired up MarketAccess. I got an error message saying that MarketAccess couldn't get SU privs. That made no sense, since the phone was rooted, and SRE installed SuperUser. I downloaded the latest copy of Superuser and installed that. The SU problem was now fixed. (Turns out there was a glitch in the SRE I used. Designgears quickly fixed the zip file, but I was already using the glitchy one.)
Anyway, after loading a slew of apps/games, I plugged the phone back into the desktop to charge the battery some more. I got two error messages, one on the phone, and one on the desktop.
The phone complained that it was not on an 'idle' screen, since ADW was running. Since I had set ADW to be the default launcher, I used TitaniumBackup to temporarily uninstall ADW. (I couldn't figure out how to stop ADW and set TW back to the default.)
The desktop is more or a serious problem. I am now getting an info bubble saying that the USB DEVICE IS NOT RECOGNIZED.
The correct USB drivers are installed. I've used them to ODIN my previous phone back to stock. And they were working fine before I added SRE, ADW, etc.
I've uninstalled and reinstalled the drivers. Didn't help.
I tried USB Debugging, on and off. Didn't help.
I tried the age-old trick of unplugging the desktop and leaving it unplugged for 30 minutes. Didn't help.
So, here are my questions:
1) Does anyone know how to correct the DEVICE NOT RECOGNIZED error?
2) If not, is there anyway for me to restore the phone to stock without USB connectivity?
The phone still functions fine, just no USB. I was able to download the new SRE (with SuperUser fixed) using Dolphin browser. I then used My Files to rename and move the zip file to the root directory, and was able to install it fine. Is this same approach possible to restore to stock?
Thanks in advance...
Click to expand...
Click to collapse
I had a similar problem and it turn out that Kies hosed up all my drivers...The only way I got it fix was by totally removing any trace of Kies and then uninstalled all my samsung drivers and usb drivers and then rebooted my pc. Then I reinstalled the samsung drivers and win 7 did the rest...

Well, I haven't uninstalled Kies yet. Although I have uninstalled and reinstalled the drivers from the ODIN thread. No difference.
I even uninstalled the ODIN referred drivers and tried the drivers directly from the Samsung site. Still no difference.
I'll go ahead and try uninstalling Kies and then the ODIN drivers, reinstall the ODIN drivers and see if that helps.
I've also ordered a new cable, since I've read a few threads on other forums where the problem was bad cables. I was going to go to AT&T and get a new cable, but they want $24.99. I just ordered a pair from Amazon at $3.99 each, with free shipping!!
Thanks...off to try ridding myself of Kies...

Well, deleting Kies (and associated drivers) didn't help!
After deleting Kies, I tried both the ODIN referenced drivers, as well as those from the Samsung site. Still not working!
I guess I'll wait on a new cable and see if that helps...

Okay, I think I'm in BIG TROUBLE here!!!
New cables arrived today, but they made no difference at all! Still getting the USB Device Not Recognized message. Doesn't matter if I plug the cable in while the phone is on and select any of the connection options (Kies, Mass Storage, etc.). It gives me the same message when I have Odin running and plug the phone in while holding the volume keys.
To further add to the problem, I tried installing the Odin referenced USB drivers on my wife's laptop which has never seen this phone or Kies. SAME PROBLEM!
I'm thinking there might actually be something wrong with the physical port on the phone. But this highlights my actual problem...
How can I return the phone (for the second time) when this phone has been rooted and is running SRE 1.2.1a ?!?!?
Apparently, there's no way for me to restore this thing to stock without USB.
Any ideas/suggestions?

Relax dude--I just got a captivate a few weeks ago, and have it working on tmobile.
For the drivers, when you plug your phone in, you're getting some errors. I know you uninstalled the drivers, but to double-check, open up device manager and see if there are any ! marks for the phone. Right-click and uninstall the entries. Also, you might try using a different USB port. I can only get my phone to connect using one of the 6 usb ports i've tried. Finally, and I don't know if these are the drivers for Odin, but I downloaded these drivers: SGH-i897_Captivate_USB_Drivers_5_02_0_2
When the phone connects, you might want to go to device manager, find the device(s), righ-click and and select 'update driver'. then, in the driver update window, pick 'manual' or 'let me specify location' and navigate to the unzipped SGH-i897_Captivate_USB_Drivers_5_02_0_2 file. Then, it should work.
Like I said, I have no idea if those are the drivers for odin...but I'm about to find out

I'd like to relax, but I think I'm dealing with a phone with a bad usb port...and since I've rooted, SRE'ed, etc., I won't be able to return it.
Anyway...
The driver you're using is the 'direct from Samsung' version, not the one for Odin.
Regardless, I've been through the exercise you propose...both with the Samsung and Odin drivers. When you attempt to manually install drivers, you need to point the installer to the ".inf" setup information file to use. The Samsung driver has three: SSADADB2.inf, SSADBUS.inf, and SSADMDM2.inf.
I get the following message when trying to use any of these three setup files:
The specified location does not contain information about your hardware.
Oh, and I've tried several different USB ports on the computer...both on my external hub and directly into the back of the machine.
Thanks for the suggestions, but still not working...
I'm really thinking I have a bad port on the phone...especially since trying the connection on my wife's laptop produces the exact same error.
Dam...
Still trying to find a way to restore the phone to stock without a USB connection...

i also have this "DEVICE NOT RECOGNIZED" on my sony x1.

Drivers
I was having trouble using the USB drivers from Samsung the one's you were using SGH-i897_Captivate_USB_Drivers_5_02_0_2. The computer didn't recognize the phone. If you havn't tryed these already give these a try. Well since I am new I can't post the url. Put these words together (forum.xda-developers com archive index.php t-730638)

superdog404 said:
I was having trouble using the USB drivers from Samsung the one's you were using SGH-i897_Captivate_USB_Drivers_5_02_0_2. The computer didn't recognize the phone. If you havn't tryed these already give these a try. Well since I am new I can't post the url. Put these words together (forum.xda-developers com archive index.php t-730638)
Click to expand...
Click to collapse
Not sure different USB drivers would help, but I went to the thread you show and tried to download the 32bit drivers. This is what I get:
{"error": "Invalid access attempt for this token"}
Oh well, thanks anyway.
I'm still thinking that the problem is hardware on the phone. I've tried four different cables, and three different computers. All show same problem of DEVICE NOT RECOGNIZED.
Still trying to figure out how to restore to stock without USB connection for ODIN so I can exchange for a new phone...

What are your USB settings on the device? Do you have debug mode enabled or maybe you've set the device to connect to kies right away which is producing errors on your PC. What versions of windows have you been trying to connect to? This sounds like a windows problem more than anything else.

No modifications, same error
I didn't make any modifications to my new AT&T Captivate, and I too am getting USB Device not recognized under any of the following conditions:
- drivers installed, no Kies
- drivers installed after Kies
- Kies installed after drivers
No response to any USB connection mode (Kies, mass storage, media player, PC INternet).
Only way to exchange files is to physically remove the SD card and plug it into my PC. Windows XP Professional.
By the way, which of the three drivers is the correct one: ssadadb2.inf, ssadbus.inf, or ssadmdm2.inf? Pardon my ignorance as to how this is supposed to work.

mukherji said:
I didn't make any modifications to my new AT&T Captivate, and I too am getting USB Device not recognized under any of the following conditions:
- drivers installed, no Kies
- drivers installed after Kies
- Kies installed after drivers
No response to any USB connection mode (Kies, mass storage, media player, PC INternet).
Only way to exchange files is to physically remove the SD card and plug it into my PC. Windows XP Professional.
By the way, which of the three drivers is the correct one: ssadadb2.inf, ssadbus.inf, or ssadmdm2.inf? Pardon my ignorance as to how this is supposed to work.
Click to expand...
Click to collapse
You should return your phone if it's new if you can't get your computer to recognize it when you have the correct settings and drivers.
Choose, mass storage. I use the drivers from ODIN, I also have to ones from Samsung's site but they are for Windows 7 64bit. Before you plug any Captivate into a PC for the first time you need to first change the settings to USB Mass storage or Kies will attemp to download drivers. Once you get your phone to mass storage windows should find the drivers. I am not sure, I am running Windows 7, I have an old desktop that runs XP, I could plug my phone in and check for you.
FiveBraids
Settings--developement-- check debugging mode, this will allow you to open a command shell. Using SDK and ADB commands.
Download SDK online.
http://developer.android.com/sdk/index.html
Follow the installation instructions. This will allow you to use the command ADB download to get your phone into download mode. Kies screws my drivers so I don't use it.

Rhiannon224 said:
You should return your phone if it's new if you can't get your computer to recognize it when you have the correct settings and drivers.
Choose, mass storage. I use the drivers from ODIN, I also have to ones from Samsung's site but they are for Windows 7 64bit. Before you plug any Captivate into a PC for the first time you need to first change the settings to USB Mass storage or Kies will attemp to download drivers. Once you get your phone to mass storage windows should find the drivers. I am not sure, I am running Windows 7, I have an old desktop that runs XP, I could plug my phone in and check for you.
FiveBraids
Settings--developement-- check debugging mode, this will allow you to open a command shell. Using SDK and ADB commands.
Download SDK online.
http://developer.android.com/sdk/index.html
Follow the installation instructions. This will allow you to use the command ADB download to get your phone into download mode. Kies screws my drivers so I don't use it.
Click to expand...
Click to collapse
The 2 folders I found that have the drivers are /program files/android/, .... and /program files/samsung. Delete these subfolders that have drivers in them.
Download this : http://www.megaupload.com/?d=N4GC49JL and unzip. In the folders inside (i386 and amd) there are uninstallers. Run whichever version is appropriate for you. If you have no drivers or it doesn't say to reboot, the main folder has a setup program. Run that to install the proper drivers. When you plug in to usb, it will now find these drivers.
Also, for me, ONLY the REAR usb ports work properly with this. Top, front, and ext hub ALL give issues.....

JayPhill89 said:
What are your USB settings on the device? Do you have debug mode enabled or maybe you've set the device to connect to kies right away which is producing errors on your PC. What versions of windows have you been trying to connect to? This sounds like a windows problem more than anything else.
Click to expand...
Click to collapse
USB is set to Ask on connection
Debug off or on makes no difference
All tests have been done on XP machines (3 different ones)
I'm all but positive this is hardware...
Thanks for trying to help!
Rhiannon224 said:
<snip>
FiveBraids
Settings--developement-- check debugging mode, this will allow you to open a command shell. Using SDK and ADB commands.
Download SDK online.
http://developer.android.com/sdk/index.html
Follow the installation instructions. This will allow you to use the command ADB download to get your phone into download mode. Kies screws my drivers so I don't use it.
Click to expand...
Click to collapse
I haven't tried ADB, but I'm not understanding how ADB would be able to connect when the connection to the computer is failing at the driver level. I guess I can give it a try tomorrow.
Thanks for trying to help!
What would REALLY help me is for someone to post a backup taken of a completely stock (ODIN'ed) phone using ROM manager. I'm thinking I could load that on the phone and then be able to return it for a new phone!
Any volunteers...please?

techmik67 said:
The 2 folders I found that have the drivers are /program files/android/, .... and /program files/samsung. Delete these subfolders that have drivers in them.
Download this : http://www.megaupload.com/?d=N4GC49JL and unzip. In the folders inside (i386 and amd) there are uninstallers. Run whichever version is appropriate for you. If you have no drivers or it doesn't say to reboot, the main folder has a setup program. Run that to install the proper drivers. When you plug in to usb, it will now find these drivers.
Also, for me, ONLY the REAR usb ports work properly with this. Top, front, and ext hub ALL give issues.....
Click to expand...
Click to collapse
Big thanks!
Just got my first Android device a couple hours ago (went from ATT Bold to Captivate), and could not get the phone to mount to my PC.... followed your instructions here and BAM! Perfect-o! I have now rooted....
OK, not sure where to go next... was thinking about just getting a new ROM flashed since I am totally stock at this point.... the fun begins!!!

jaxf250 said:
Big thanks!
Just got my first Android device a couple hours ago (went from ATT Bold to Captivate), and could not get the phone to mount to my PC.... followed your instructions here and BAM! Perfect-o! I have now rooted....
OK, not sure where to go next... was thinking about just getting a new ROM flashed since I am totally stock at this point.... the fun begins!!!
Click to expand...
Click to collapse
Great!! Glad it all worked for you. My next advice is, before adding anything READ A LOT!!! =) Decide what you want from the descriptions and issues you will see in the threads....
Happy modding!!

I didn't see, I just skimmed through bit did you try to put the phone in download mode and see if windows sees that (different drivers come in to play in download mode and none of the touch wiz stuff is running)? it would test the idea of a bad port.
then you can still always install linux and use adw from there, linux and macs don't need drivers. if that doesn't work, put insurance on the phone if you haven't already then drop it in the sink and get another one.
also I think although I don't know but I think adw may have something to do with it. and incorrectly uninstalling it. first put the phone in download mode then you can work from there on ways to fix that.
Sent from my SAMSUNG-SGH-I897 using Tapatalk

Ok, I've given up trying to get this to work. I'm 100% convinced this is a hardware problem with the phone!
I had another thread going, looking for a way to restore this phone (remove SRE, SU, etc.) without usb/ODIN so I could return it to AT&T. I've figured out how to restore it to stock and will be heading to AT&T in the morning.
Thanks to everyone for their patience and assistance!

[Q] Computer not recognizing Tab in Download mode

Hey guys,
For some reason, my Windows 7 32bit laptop is not recognizing the Galaxy tab at all when in download mode. I have installed kies (which incidentally also doesn't recognize the tab), and installed the individual drivers, but cannot get my computer to even see the Tab.
When the Tab is in normal mode (debugging turned off), I can mount the Tab as a drive and it has no problems.
Has anybody else run into this issue? The Tab is not showing up in the device manager at all. I do have root, and my end desire is to connect with Heimdall, and continue to get the error message "Failed to detect compatible device."
Any help would be greatly appreciated.
Seth

Download and install drivers for your tab. Samsung website should have them, if not they shouldn't be too hard to find.

drivers
Hi,
Already tried that. Kies doesn't recognize the device at all (with USB debugging active and not active both), and the Device Manager doesn't show anything either. When I plug the tab in, it recognizes that it is connected, but mounting the SD card as a drive doesn't do anything either.
The worst part about it is that I'm not sure that I can even revert to stock without being able to get Heimdall working. I've searched a ton, and it seems to be the key to just about everything. Any other ideas?
Seth

have you tried to install the drivers that come with Heimdall? I've had to force install those a couple times to get my Tab recognized in download mode.

Heimdall drivers
pvtjoker42,
Can you explain a little about what you mean? I am running Heimdall 1.1.1 have done the following:
1. Browse from the main folder to the "Drivers" folder and run zadig as an Administrator.
2. Click on "Options" and select "List all devices"
3. Click on the dropdown menu and search for anything that might be related to Samsung Galaxy Tab or Android of which there are none.
Is there a different way to force the install of the Heimdall drivers that I'm unaware of?
Thanks for your help,
Seth

when you drop down the list of devices what all is listed? I've had it show up as just a serial device before, with no mention of samsung/tab/galaxy etc..

Devices
Cisco VT Camera II (Interface 0)
Cisco Microphone (VT Camera II) (Interface 2)
USB Receiver (Interface 0)
USB Receiver (Interface 1)
USB-Serial Controller D
Fingerprint Sensor
Optical Drive Controller
TOSHIBA Web Camera (Interface 0)
USB Multimedia Audio Device (Interface 0)
USB Multimedia Audio Device (Interface 3)
Those same entries can be found in Device Manager>Universal Serial Bus controllers even on first boot if the Tab is not connected. Even after connecting the Tab, this list does not change.
Thanks again for your help!
Seth

have you tried uninstalling everything related to the tab? Kies, the specific drivers etc, then trying the Heimdall drivers?
So all the devices listed above are there when the Tab isn't even plugged in? Odd.. I would have suggested trying it for the USB-Serial Controller D, but if it's there without the Tab plugged in it sound like a different system device.
Don't suppose you have access to a different pc to try it on? see if it even notices the Tab being plugged in and tries to install drivers..

Yeah, I have other computers to try. Tried plugging it in yesterday to a different computer (same brand and model) with no change. Computer didn't recognize the device at all and/or try to install drivers.
Usually when an unknown device is plugged into a computer, the computer registers that it's there - the Device Manager shows an "Unknown Device" somewhere in the list, but this isn't the case with this device. Not sure what happened, but it appears as though I goofed up the USB somehow in the rooting process or the port itself went bad.
I'll try other computers and write back.
Thanks again,
Seth

I've tried three different computers with the same outcome. They do not register the device at all, and I cannot mount the SD card to the computer. I'm definitely at a bit of a loss at this point. Without USB, I'm not sure how else to make this happen. Ideas?
Seth

Just to double check with hemidall ur opening the drivers folder and running zadig.exe in there going to options>list all devices

Yes, that is correct. I'm opening the Heimdall 1.1.1 folder, opening the drivers folder, and running zadig. Nothing pops up at all and nothing shows up in the device manager.
I cannot mount the SD card to my computer, but the Tab recognizes it when I plug it into the computer's USB port. That's as far as I can get, however, as the computer does not see the Tab at all.

Have you tried 'fix permisions' in recovery mode - usually under the advanced option?
Sent from my GT-P1000 using XDA App

There is no "Fix permissions" in this recovery mode. Tried to fix permissions from cwr (which only went through 2 lines), but it doesn't seem to make any difference. Still force closes Gallery when I try to mount the SD card. Also force closes gallery when I try to open gallery.
This is very strange. It continues to tell me that there is an update available. I might go ahead and take it to see if it takes me back to stock. I would be okay with this as long as I had USB connectivity again and could root.
Any other thoughts?
Seth
P.S. Tried to take the update, but it gets about 1/3 of the way through the install and fails.

Any other ideas on how to flash without Heimdall?

Seth, what about trying Odin3 and its drivers?
Sent from my GT-P1000 using XDA App

I'll look around and find Odin3 and give it a shot. I'm concerned that because my computer doesn't recognize it as a connected USB device, that no program will see it either. That said, it's worth the shot and I appreciate the suggestion.
Do you know whether I can use the same files for Odin that I would use with Heimdall? Do they need to be packaged differently?
Thanks in advance,
Seth

If you have GSM based tab you can try flashing Team Overcome's Kratos ROM (I had no issues with download mode following their excellent ROM flashing instruction here http://p1000.teamovercome.net/?page_id=64 ) which involves download mode + using Odin, which displayed that it's connected to a tab through a serial port emulation. At least you can confirm if your tab's download mode is working. I'm using Win 7 Home Premium 64 btw.

I downloaded Odin 3, but without knowing if I am able to flash a package designed for Heimdall, I'm not sure what Odin 3 would tell me. Thoughts? Can I use Odin3 to transfer one of the Heimdall-specific ROMs to the Tab?

I had this same problem some weeks back. I had to use the drivers that came with Heimdall, and most importantly, in order to get it to recognize in download mode, I had to install them while in download mode and plugged in.

[Q] USB Debugging/Mass Storage Mode connection to computer issue

Hello folks,
I'm facing this "please insert a disk" issue when connecting my Note to computer via USB Debugging mode / Mass Storage Mode.
I'll let screenshots in the attachment explain itself. #1 shows the screenshot of devices menu when the phone is plugged into the computer in DEBUG mode; #2 shows the screen after I've clicked "connect USB storage" from the drop-down list of the phone; #3 shows what happens when I try to open one of the two "removable disks".
MTP mode works fine, as well as Kies connection. As I finally started exploring the potential of Android platform, I realized that MTP and Kies connection are the most useless connection options for me, and I'd rather leave it in debug mode all day. So has anybody experienced this issue, or had any suggestion on the solution?
As always, many thanks in advance, and many thanks button clicks afterward!
p.s.,
Desktop OS: Win7 Pro X64 SP1
Note: 2.3.6 Stock LB1 Open Germany Firmware, CF rooted LB1 kernel.
Also, I should have all the latest official device driver from Samsung, as I have the latest version of Kies installed (and I discovered a driver folder under Kies' installed location). I'm not so sure about adb driver, but I was able to find the Note to be listed under devices by typing "adb devices". So.. I don't know where could've gone wrong.

Help anyone?

This really sounds weird... I was facing problems of the Galaxy Note not being detected on several Windows7 32/64-Bit SP1 computers as well but this was gone after I installed SAMSUNG_USB_Driver_for_Mobile_Phones.
You are right - from all that i know all required drivers should be available when KIES is installed on your system. Whatis even more strange is that your device seems to be detected as two partitions are available and are displayed in Explorer...
So I would test the following:
- check if your device manager lists any unknown devices
- Uninstall KIES and try to find the SAMSUNG_USB_Driver_for_Mobile_Phones and install those
- check all available USB ports and see if this solves the problem
- try another USB cable
- make sure your (external) SD card is formatted with a Windows compatible file-system e.g. FAT32
Hope this is helpful and helps solving your problem.

Thanks for your reply!
My device manager basically listed all the drivers/devices associated with the phone:
My Device manager shows devices:
Samsung Android Composite ADB interface
Android UMS Composite USB device (x2)
SAMSUNG Android USB Modem
USB Mass Storage Device
USB Mass Storage Device (Android)
I've attached the screenshot when all the drivers being installed when the phone is firstly connected to the computer. Also in the device manager, everything shows "this device is working properly"
I then decided to test with another Note of my friend's (On the same computer). Her Note has no SD card in it, and is completely stock ROM non-rooted LA4 Open Germany firmware. The same thing happened.
One thing worth mentioning: Yesterday, this worked only for once. When I initially encountered this issue, I restarted my computer, and boom, my phone was connected in Debugging mode! However, once disconnected, and I tried to connect it to the computer again, this issue came back. And afterward, no matter how I restart my computer, the phone won't get connected.
I also tried all USB port (USB 2.0 and 3.0), three different cables (2 of them are Samsung OEMs) and failed to address the issue.
I'm nearly exhausted but I will never give up, as this is my only computer and my only phone (haha), and without solving this issue, I'm never gonna be able to view the phone as a USB storage and easily transfer the file from my computer to the phone.
I'm going to try the last thing that I haven't done from the list you posted:
- Uninstall KIES and try to find the SAMSUNG_USB_Driver_for_Mobile_Phones and install those
I believe that I can keep the driver folder in the Kies' folder, as I believe those are the newest Samsung driver, given that the Kies was the latest release version.
So far, I can only conclude that this issue is not related to specific phone but the Windows 7.
And thank you for your help btotaku!
If anyone has any insight into this issue, please help me. Thumbs up for you!

BTW, I was able to extract both SAMSUNG_USB_Driver_for_Mobile_Phones.exe from under Kies' installation path under Program Files x86 folder, and an uncompressed folder of all kinds of drivers for Samsung device, called "USB Drivers".
And looks like I was wrong. The newest version of SAMSUNG_USB_Driver_for_Mobile_Phones I had was 1.4.8. While the driver that came with the newest Kies was 1.4.103
I'll post back soon

Reinstal Windows on your PC bro.
Problem fixed.

is that your internal memory or the sd card?

Same thing happens either with SD card in the phone or not

avetny said:
Reinstal Windows on your PC bro.
Problem fixed.
Click to expand...
Click to collapse
That's the last thing I would do

I9305 usb connection/driver problem

I've added a few apps to my S3 and altered a few things on my PC and now I can't connect via mtp or ptp. It goes through the usual "installing drivers" and then fails. I've tried pulling the battery and removing the sim and micro sd card then putting everything back. Tried it without the card (currently having to transfer files via a card reader so - at least the card's fine) but to no avail.
I've had a go at uninstalling the drivers through the device manager, rebooting and scanning for hardware changes. I've tried downloading the drivers without kies but it didnt work out (I cant remember the site or the url, but ended up with the following file SAMSUNG_USB_Driver_for_Mobile_Phones) It didn't auto install but even when I tried to point Windows to the folder on my C drive, nothing.
I've spent a couple of hours trawling the net including on here and tried all sorts.
I'm rooted, using the stock 4.1.2 ROM with Windows 7.
I can't use Kies as when it was installed the first time it wrecked all my Synctoy sync's so I really could do with another option please guys.

Dial *#7284# on your phone to access PhoneUtil and select 'Qualcomm USB Settings' at the bottom.
Now select 'MTP + ADB' and press 'OK' to return to the previous screen. Now press your 'Back' key to exit PhoneUtil. Your phone is now back to default USB operation.

Raistlin1158 said:
Dial *#7284# on your phone to access PhoneUtil and select 'Qualcomm USB Settings' at the bottom.
Now select 'MTP + ADB' and press 'OK' to return to the previous screen. Now press your 'Back' key to exit PhoneUtil. Your phone is now back to default USB operation.
Click to expand...
Click to collapse
Thanks for the quick reply.I did that and it was set to mtp + adb...
When I then connected it it tried installing the driver and I got..
Driver device software was not installed.
Please consult with your device manufacturer for assistance getting this device installed
MTP USB Device X Failed
I tried updating the MTP drivers again from device manager but this time got
Windows encountered a problem installing the driver software for your device
Windows found driver software for your device but encountered an error while attempting to install it.
SAMSUNG Mobile MPT Device
This device cannot start (code 10)
From what I'm reading it's a computer error not the phone. Can anyone suggest a new set of drivers to download (that doesnt involve Kies) as I've had issues with picking up harmful software from random sites when I've been struggling to find drivers.
I tried using the suggestion at the bottom of here r.e.Portable Devices and deleting the Upperfilters string Link but also to no avail.
Oh, and yes I've tried different ports and cables.

Well that's me done for the evening! I've tried everything mentioned in this thread including updating java and windows media player and all the afformentioned stuff but still no dice.
Could it be the actual drivers or a random windows 7 setting that I haven't yet tweaked since my clean install of windows??

http://d-h.st/YpV
Here are the correct drivers, install then reboot your pc.

Raistlin1158 said:
Go here for drivers.
---------- Post added at 01:00 AM ---------- Previous post was at 12:57 AM ----------
http://d-h.st/YpV
Here sre the correct drivers, install then reboot your pc.
Click to expand...
Click to collapse
Sorry,I know I'm tired but I can't see a link on your post...

Highlighted in red

The newer drivers don't really wwork with the 9305 so find some older drivers. That works for me
Sent from my GT-I9305 using xda app-developers app

Thanks for the tip.any suggestions as to where I can download these older drivers? I'll try the previously mentioned ones first, but I'm starting to think it might be the drivers themselves

woldranger said:
Thanks for the tip.any suggestions as to where I can download these older drivers? I'll try the previously mentioned ones first, but I'm starting to think it might be the drivers themselves
Click to expand...
Click to collapse
The ones I posted work fine on my 9305 so you shouldn't have any issues and as you can see from the site they are nearly a year old.
Try them what have you got to loose, if they don't work you are no worse off

Raistlin1158 said:
The ones I posted work fine on my 9305 so you shouldn't have any issues and as you can see from the site they are nearly a year old.
Try them what have you got to loose, if they don't work you are no worse off
Click to expand...
Click to collapse
Cheers, yeah, I was going to try them but I wasn't at my pc at the time I wrote that. I've downloaded the exe package but now it seems there are still drivers to uninstall - I uninstalled the drivers through device manager and went into my C drive and removed the SAMSUNG folder with the USB drivers in it. I'll restart the pc and hope that helps with the removal....

woldranger said:
I've added a few apps to my S3 and altered a few things on my PC and now I can't connect via mtp or ptp. It goes through the usual "installing drivers" and then fails. I've tried pulling the battery and removing the sim and micro sd card then putting everything back. Tried it without the card (currently having to transfer files via a card reader so - at least the card's fine) but to no avail.
I've had a go at uninstalling the drivers through the device manager, rebooting and scanning for hardware changes. I've tried downloading the drivers without kies but it didnt work out (I cant remember the site or the url, but ended up with the following file SAMSUNG_USB_Driver_for_Mobile_Phones) It didn't auto install but even when I tried to point Windows to the folder on my C drive, nothing.
I've spent a couple of hours trawling the net including on here and tried all sorts.
I'm rooted, using the stock 4.1.2 ROM with Windows 7.
I can't use Kies as when it was installed the first time it wrecked all my Synctoy sync's so I really could do with another option please guys.
Click to expand...
Click to collapse
Having the same problem. but I am on 4.3 rom using carbon rom a few days then transferred to pac man rom. My cellphone is not detected in my computer but it is being detected in the safely remove usb options. I tried to use a usb otg cable and a flash disk. No notification is seen on my phone but I can access the files on the flash disk (using usb otg cable) in the file manager. Tried the *#7284# but error occurs and says connection problem or invalid MMI code. I found that MTP udb device says failed

Raistlin1158 said:
The ones I posted work fine on my 9305 so you shouldn't have any issues and as you can see from the site they are nearly a year old.
Try them what have you got to loose, if they don't work you are no worse off
Click to expand...
Click to collapse
It made no difference whatsoever. I used a utility to check for an remove the samsung drivers (USBDeview) as well as uninstalling through device manager and removing with windows "products and features" but even then, when I tried installing the new drivers it mentioned previous drivers. I restarted after each stage of the process.
I've even tried connecting it in download mode and it shows in device manager.
Could there be some remnant of the software I used to root that phone that might be causing the issue??
I'm due to leave the country in 5 days and have loads of things to sort (also have a family member going into hospital for major surgery tomorrow) so I can't just devote all my time to this - but I need to at least know that it's not the phone (I dont have another win 7 computer to try it on).

woldranger said:
It made no difference whatsoever. I used a utility to check for an remove the samsung drivers (USBDeview) as well as uninstalling through device manager and removing with windows "products and features" but even then, when I tried installing the new drivers it mentioned previous drivers. I restarted after each stage of the process.
I've even tried connecting it in download mode and it shows in device manager.
Could there be some remnant of the software I used to root that phone that might be causing the issue??
I'm due to leave the country in 5 days and have loads of things to sort (also have a family member going into hospital for major surgery tomorrow) so I can't just devote all my time to this - but I need to at least know that it's not the phone (I dont have another win 7 computer to try it on).
Click to expand...
Click to collapse
Just got the same problem. But my problem is already solved. Just flash a new rom. In my instance, I flash ripper rom

[SOLVED] Windows 7 can't recognize Samsung Galaxy S Advance GT-I9070

Hi everybody,
I have a 64-bit PC with Windows 7 Ultimate Service Pack 1 and a Samsung Galaxy S Advance GT-I9070 with Android 4.1.2.
I can't install a driver in order to make Windows recognize correctly the phone when I connect it via USB cable.
I've installed and uninstalled Samsung Kies many times with no results. I've also tried some Samsung driver from Windows Update with no success...
When I connect the phone, it is recognized as a MTP Device and the driver installation starts, but always ends with an error, as shown in the attached screen-shot image.
What can I do?
Thank you very very much.
Note: in another PC with WinXP I have no problems.

Firstly make sure phone can run MTP (make sure if you delete MTP releated stuff in system you won't able connect it. Re-flash with Odin) Now if you don't have problem with phone then uninstall drivers & KIES from Windows. Don't just do a uninstall clear temp files, dll files, registry entries (you can use CCleaner) then install THIS DRIVERS.

explanation
King ov Hell said:
Firstly make sure phone can run MTP (make sure if you delete MTP releated stuff in system you won't able connect it. Re-flash with Odin) Now if you don't have problem with phone then uninstall drivers & KIES from Windows. Don't just do a uninstall clear temp files, dll files, registry entries (you can use CCleaner) then install THIS DRIVERS.
Click to expand...
Click to collapse
Hello, thank you for your answer.
How can I make sure my phone can run MTP?
For the complete uninstall, is it enough to run CCleaner, uninstall Kies and then perform the Registry Cleaner in CCleaner?
Thank you

ZioAlfredo said:
Hello, thank you for your answer.
How can I make sure my phone can run MTP?
For the complete uninstall, is it enough to run CCleaner, uninstall Kies and then perform the Registry Cleaner in CCleaner?
Thank you
Click to expand...
Click to collapse
Did you root phone ? or installed a ROM or you just using it stock ?
I noticed something too; if you any have PIN or Password you have to unlock phone otherwise MTP not works. Unlock it and try too.
CCleaner will *probably* be enough but if you want to make sure go to regedit.exe and go to;
Code:
HKEY_CURRENT_USER/Software/
Then delete KIES & USB Driver stuff (don't delete system USB configs & drivers just Samsung's softwares )
EDIT: In start menu click to RUN (or whatever I don't now it's name in English, you're entering a text) Then write
Code:
%AppData%
Then delete KIES & Samsung folders and files.

I've just Updated the phone firmware from Android 2.3.6 to 4.1.2 with Samsung Kies on my WinXP PC.
I've deleted all Samsung Kies registry entries.
Now I'm going to install the driver you suggested...

Let me see results...

King ov Hell said:
Let me see results...
Click to expand...
Click to collapse
Failure... The same as always

ZioAlfredo said:
Failure... The same as always
Click to expand...
Click to collapse
...

I've also installed Windows MTP Porting Kit, but it still fails...
Any idea?..
I think it is the configuration of this PC, because in another brand new PC with Windows 7 I've installed Kies and it all went right.

ZioAlfredo said:
I've also installed Windows MTP Porting Kit, but it still fails...
Any idea?..
I think it is the configuration of this PC, because in another brand new PC with Windows 7 I've installed Kies and it all went right.
Click to expand...
Click to collapse
Have you tried to reboot phone? I lost mtp after charging phone over wall charger. Everytime I need to reboot after charging to get it connected to pc.
Sent from my GT-I9070 using Tapatalk

This may be a bit silly but is important to ask.
Was your PC connected connected to the internet while installing the drivers??
Did you unplug your phone while the drivers were being installed??

anantttt said:
This may be a bit silly but is important to ask.
Was your PC connected connected to the internet while installing the drivers??
Did you unplug your phone while the drivers were being installed??
Click to expand...
Click to collapse
Yes to all.

shut_down said:
Have you tried to reboot phone? I lost mtp after charging phone over wall charger. Everytime I need to reboot after charging to get it connected to pc.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
I've just tried to reboot the phone before connecting it to the PC, but I get the same error (see attachments).
Last year I managed to connect the phone to this PC, but, in any case the connection got interrupted after a while (see this thread).
I don't know what to do...

I had the same problem when i formatted my PC 2 days ago. I did some trial and error and it worked.
1. Dont use any USB Hub if you are using.
2. Remove the Pattern lock or any password security etc. Go to lock screen and select 'None'. (I dont know why but windows doesn't recognise if the device is locked)
3. Have Kies installed. Even new version worked for me. I used 2.5.13043_14
4.Connect your device with the USB cable (Should have MTP option selected which is by default)
5. Windows automatically recognises now and installs the necessary files.
P.S:- Remove the security pattern, etc. It really works.
If worked then pls reply.

Hello,
I've disable any screen lock on my phone and I've connected the USB cable to another USB port (a 3.0 USB port) and Windows magically recognized correctly the device! (no Kies installed, only drivers)
Anyway, after some minutes of usage (cut-paste of files). Windows stopped recognizing the device...
If I disconnect the phone and then connect it back, Windows still recognizes it, but I have few minutes until the device stops being recognized and no file on it can be read...
See attached pictures

ZioAlfredo said:
Hello,
I've disable any screen lock on my phone and I've connected the USB cable to another USB port (a 3.0 USB port) and Windows magically recognized correctly the device! (no Kies installed, only drivers)
Anyway, after some minutes of usage (cut-paste of files). Windows stopped recognizing the device...
If I disconnect the phone and then connect it back, Windows still recognizes it, but I have few minutes until the device stops being recognized and no file on it can be read...
See attached pictures
Click to expand...
Click to collapse
Did you download newest version of drivers? I see in your screenshot it says 2012, on mine it is 2014.
Did you set Windows to gather drivers automaticaly from the internet?

shut_down said:
Did you download newest version of drivers? I see in your screenshot it says 2012, on mine it is 2014.
Did you set Windows to gather drivers automaticaly from the internet?
Click to expand...
Click to collapse
This is how my PC recognizes my phone. The driver seems to be old, but I've configured Windows for downloading drivers automatically and that is all it can do.
Today, th PC did not recognized the phone at once. Then I unmounted and mounted back the MicroSD card and the PC recognized it.
But, after few seconds of folder browsing, the PC lost the connection. I'm thinking that the problem is the SD card.

Solved!
Solved!
It was the USB cable.
I replaced it with an original one and now it works.
Thank you everybody for your effort!