Hey guys,
For some reason, my Windows 7 32bit laptop is not recognizing the Galaxy tab at all when in download mode. I have installed kies (which incidentally also doesn't recognize the tab), and installed the individual drivers, but cannot get my computer to even see the Tab.
When the Tab is in normal mode (debugging turned off), I can mount the Tab as a drive and it has no problems.
Has anybody else run into this issue? The Tab is not showing up in the device manager at all. I do have root, and my end desire is to connect with Heimdall, and continue to get the error message "Failed to detect compatible device."
Any help would be greatly appreciated.
Seth
Download and install drivers for your tab. Samsung website should have them, if not they shouldn't be too hard to find.
drivers
Hi,
Already tried that. Kies doesn't recognize the device at all (with USB debugging active and not active both), and the Device Manager doesn't show anything either. When I plug the tab in, it recognizes that it is connected, but mounting the SD card as a drive doesn't do anything either.
The worst part about it is that I'm not sure that I can even revert to stock without being able to get Heimdall working. I've searched a ton, and it seems to be the key to just about everything. Any other ideas?
Seth
have you tried to install the drivers that come with Heimdall? I've had to force install those a couple times to get my Tab recognized in download mode.
Heimdall drivers
pvtjoker42,
Can you explain a little about what you mean? I am running Heimdall 1.1.1 have done the following:
1. Browse from the main folder to the "Drivers" folder and run zadig as an Administrator.
2. Click on "Options" and select "List all devices"
3. Click on the dropdown menu and search for anything that might be related to Samsung Galaxy Tab or Android of which there are none.
Is there a different way to force the install of the Heimdall drivers that I'm unaware of?
Thanks for your help,
Seth
when you drop down the list of devices what all is listed? I've had it show up as just a serial device before, with no mention of samsung/tab/galaxy etc..
Devices
Cisco VT Camera II (Interface 0)
Cisco Microphone (VT Camera II) (Interface 2)
USB Receiver (Interface 0)
USB Receiver (Interface 1)
USB-Serial Controller D
Fingerprint Sensor
Optical Drive Controller
TOSHIBA Web Camera (Interface 0)
USB Multimedia Audio Device (Interface 0)
USB Multimedia Audio Device (Interface 3)
Those same entries can be found in Device Manager>Universal Serial Bus controllers even on first boot if the Tab is not connected. Even after connecting the Tab, this list does not change.
Thanks again for your help!
Seth
have you tried uninstalling everything related to the tab? Kies, the specific drivers etc, then trying the Heimdall drivers?
So all the devices listed above are there when the Tab isn't even plugged in? Odd.. I would have suggested trying it for the USB-Serial Controller D, but if it's there without the Tab plugged in it sound like a different system device.
Don't suppose you have access to a different pc to try it on? see if it even notices the Tab being plugged in and tries to install drivers..
Yeah, I have other computers to try. Tried plugging it in yesterday to a different computer (same brand and model) with no change. Computer didn't recognize the device at all and/or try to install drivers.
Usually when an unknown device is plugged into a computer, the computer registers that it's there - the Device Manager shows an "Unknown Device" somewhere in the list, but this isn't the case with this device. Not sure what happened, but it appears as though I goofed up the USB somehow in the rooting process or the port itself went bad.
I'll try other computers and write back.
Thanks again,
Seth
I've tried three different computers with the same outcome. They do not register the device at all, and I cannot mount the SD card to the computer. I'm definitely at a bit of a loss at this point. Without USB, I'm not sure how else to make this happen. Ideas?
Seth
Just to double check with hemidall ur opening the drivers folder and running zadig.exe in there going to options>list all devices
Yes, that is correct. I'm opening the Heimdall 1.1.1 folder, opening the drivers folder, and running zadig. Nothing pops up at all and nothing shows up in the device manager.
I cannot mount the SD card to my computer, but the Tab recognizes it when I plug it into the computer's USB port. That's as far as I can get, however, as the computer does not see the Tab at all.
Have you tried 'fix permisions' in recovery mode - usually under the advanced option?
Sent from my GT-P1000 using XDA App
There is no "Fix permissions" in this recovery mode. Tried to fix permissions from cwr (which only went through 2 lines), but it doesn't seem to make any difference. Still force closes Gallery when I try to mount the SD card. Also force closes gallery when I try to open gallery.
This is very strange. It continues to tell me that there is an update available. I might go ahead and take it to see if it takes me back to stock. I would be okay with this as long as I had USB connectivity again and could root.
Any other thoughts?
Seth
P.S. Tried to take the update, but it gets about 1/3 of the way through the install and fails.
Any other ideas on how to flash without Heimdall?
Seth, what about trying Odin3 and its drivers?
Sent from my GT-P1000 using XDA App
I'll look around and find Odin3 and give it a shot. I'm concerned that because my computer doesn't recognize it as a connected USB device, that no program will see it either. That said, it's worth the shot and I appreciate the suggestion.
Do you know whether I can use the same files for Odin that I would use with Heimdall? Do they need to be packaged differently?
Thanks in advance,
Seth
If you have GSM based tab you can try flashing Team Overcome's Kratos ROM (I had no issues with download mode following their excellent ROM flashing instruction here http://p1000.teamovercome.net/?page_id=64 ) which involves download mode + using Odin, which displayed that it's connected to a tab through a serial port emulation. At least you can confirm if your tab's download mode is working. I'm using Win 7 Home Premium 64 btw.
I downloaded Odin 3, but without knowing if I am able to flash a package designed for Heimdall, I'm not sure what Odin 3 would tell me. Thoughts? Can I use Odin3 to transfer one of the Heimdall-specific ROMs to the Tab?
I had this same problem some weeks back. I had to use the drivers that came with Heimdall, and most importantly, in order to get it to recognize in download mode, I had to install them while in download mode and plugged in.
Related
Well, I spent the last week or so having all sorts of creative fun with my new Captivate. Unfortunately, I was having the random shutdown issue, so I decided to remove SRE, SU, etc, using ODIN to restore my phone back to stock and get it exchanged for a new one.
I came home with my new phone today and proceeded to start the customization process all over. Before I did anything serious, I connected my new Captivate to my desktop, to both charge the battery and to sync with outlook using Kies.
With a full battery and my contacts loaded, I moved on the rooting and installing SRE. I then installed a bunch of apps, including ADW, ShopSavvy, and a bunch of games.
I then tried to get on the Market to download a few more apps. I forgot to 'emulate' T-Mobile to get around the AT&T censorship, so I fired up MarketAccess. I got an error message saying that MarketAccess couldn't get SU privs. That made no sense, since the phone was rooted, and SRE installed SuperUser. I downloaded the latest copy of Superuser and installed that. The SU problem was now fixed. (Turns out there was a glitch in the SRE I used. Designgears quickly fixed the zip file, but I was already using the glitchy one.)
Anyway, after loading a slew of apps/games, I plugged the phone back into the desktop to charge the battery some more. I got two error messages, one on the phone, and one on the desktop.
The phone complained that it was not on an 'idle' screen, since ADW was running. Since I had set ADW to be the default launcher, I used TitaniumBackup to temporarily uninstall ADW. (I couldn't figure out how to stop ADW and set TW back to the default.)
The desktop is more or a serious problem. I am now getting an info bubble saying that the USB DEVICE IS NOT RECOGNIZED.
The correct USB drivers are installed. I've used them to ODIN my previous phone back to stock. And they were working fine before I added SRE, ADW, etc.
I've uninstalled and reinstalled the drivers. Didn't help.
I tried USB Debugging, on and off. Didn't help.
I tried the age-old trick of unplugging the desktop and leaving it unplugged for 30 minutes. Didn't help.
So, here are my questions:
1) Does anyone know how to correct the DEVICE NOT RECOGNIZED error?
2) If not, is there anyway for me to restore the phone to stock without USB connectivity?
The phone still functions fine, just no USB. I was able to download the new SRE (with SuperUser fixed) using Dolphin browser. I then used My Files to rename and move the zip file to the root directory, and was able to install it fine. Is this same approach possible to restore to stock?
Thanks in advance...
Uninstall the usb drivers. Not sure what there called when kies installs it
fivebraids said:
Well, I spent the last week or so having all sorts of creative fun with my new Captivate. Unfortunately, I was having the random shutdown issue, so I decided to remove SRE, SU, etc, using ODIN to restore my phone back to stock and get it exchanged for a new one.
I came home with my new phone today and proceeded to start the customization process all over. Before I did anything serious, I connected my new Captivate to my desktop, to both charge the battery and to sync with outlook using Kies.
With a full battery and my contacts loaded, I moved on the rooting and installing SRE. I then installed a bunch of apps, including ADW, ShopSavvy, and a bunch of games.
I then tried to get on the Market to download a few more apps. I forgot to 'emulate' T-Mobile to get around the AT&T censorship, so I fired up MarketAccess. I got an error message saying that MarketAccess couldn't get SU privs. That made no sense, since the phone was rooted, and SRE installed SuperUser. I downloaded the latest copy of Superuser and installed that. The SU problem was now fixed. (Turns out there was a glitch in the SRE I used. Designgears quickly fixed the zip file, but I was already using the glitchy one.)
Anyway, after loading a slew of apps/games, I plugged the phone back into the desktop to charge the battery some more. I got two error messages, one on the phone, and one on the desktop.
The phone complained that it was not on an 'idle' screen, since ADW was running. Since I had set ADW to be the default launcher, I used TitaniumBackup to temporarily uninstall ADW. (I couldn't figure out how to stop ADW and set TW back to the default.)
The desktop is more or a serious problem. I am now getting an info bubble saying that the USB DEVICE IS NOT RECOGNIZED.
The correct USB drivers are installed. I've used them to ODIN my previous phone back to stock. And they were working fine before I added SRE, ADW, etc.
I've uninstalled and reinstalled the drivers. Didn't help.
I tried USB Debugging, on and off. Didn't help.
I tried the age-old trick of unplugging the desktop and leaving it unplugged for 30 minutes. Didn't help.
So, here are my questions:
1) Does anyone know how to correct the DEVICE NOT RECOGNIZED error?
2) If not, is there anyway for me to restore the phone to stock without USB connectivity?
The phone still functions fine, just no USB. I was able to download the new SRE (with SuperUser fixed) using Dolphin browser. I then used My Files to rename and move the zip file to the root directory, and was able to install it fine. Is this same approach possible to restore to stock?
Thanks in advance...
Click to expand...
Click to collapse
I had a similar problem and it turn out that Kies hosed up all my drivers...The only way I got it fix was by totally removing any trace of Kies and then uninstalled all my samsung drivers and usb drivers and then rebooted my pc. Then I reinstalled the samsung drivers and win 7 did the rest...
Well, I haven't uninstalled Kies yet. Although I have uninstalled and reinstalled the drivers from the ODIN thread. No difference.
I even uninstalled the ODIN referred drivers and tried the drivers directly from the Samsung site. Still no difference.
I'll go ahead and try uninstalling Kies and then the ODIN drivers, reinstall the ODIN drivers and see if that helps.
I've also ordered a new cable, since I've read a few threads on other forums where the problem was bad cables. I was going to go to AT&T and get a new cable, but they want $24.99. I just ordered a pair from Amazon at $3.99 each, with free shipping!!
Thanks...off to try ridding myself of Kies...
Well, deleting Kies (and associated drivers) didn't help!
After deleting Kies, I tried both the ODIN referenced drivers, as well as those from the Samsung site. Still not working!
I guess I'll wait on a new cable and see if that helps...
Okay, I think I'm in BIG TROUBLE here!!!
New cables arrived today, but they made no difference at all! Still getting the USB Device Not Recognized message. Doesn't matter if I plug the cable in while the phone is on and select any of the connection options (Kies, Mass Storage, etc.). It gives me the same message when I have Odin running and plug the phone in while holding the volume keys.
To further add to the problem, I tried installing the Odin referenced USB drivers on my wife's laptop which has never seen this phone or Kies. SAME PROBLEM!
I'm thinking there might actually be something wrong with the physical port on the phone. But this highlights my actual problem...
How can I return the phone (for the second time) when this phone has been rooted and is running SRE 1.2.1a ?!?!?
Apparently, there's no way for me to restore this thing to stock without USB.
Any ideas/suggestions?
Relax dude--I just got a captivate a few weeks ago, and have it working on tmobile.
For the drivers, when you plug your phone in, you're getting some errors. I know you uninstalled the drivers, but to double-check, open up device manager and see if there are any ! marks for the phone. Right-click and uninstall the entries. Also, you might try using a different USB port. I can only get my phone to connect using one of the 6 usb ports i've tried. Finally, and I don't know if these are the drivers for Odin, but I downloaded these drivers: SGH-i897_Captivate_USB_Drivers_5_02_0_2
When the phone connects, you might want to go to device manager, find the device(s), righ-click and and select 'update driver'. then, in the driver update window, pick 'manual' or 'let me specify location' and navigate to the unzipped SGH-i897_Captivate_USB_Drivers_5_02_0_2 file. Then, it should work.
Like I said, I have no idea if those are the drivers for odin...but I'm about to find out
I'd like to relax, but I think I'm dealing with a phone with a bad usb port...and since I've rooted, SRE'ed, etc., I won't be able to return it.
Anyway...
The driver you're using is the 'direct from Samsung' version, not the one for Odin.
Regardless, I've been through the exercise you propose...both with the Samsung and Odin drivers. When you attempt to manually install drivers, you need to point the installer to the ".inf" setup information file to use. The Samsung driver has three: SSADADB2.inf, SSADBUS.inf, and SSADMDM2.inf.
I get the following message when trying to use any of these three setup files:
The specified location does not contain information about your hardware.
Oh, and I've tried several different USB ports on the computer...both on my external hub and directly into the back of the machine.
Thanks for the suggestions, but still not working...
I'm really thinking I have a bad port on the phone...especially since trying the connection on my wife's laptop produces the exact same error.
Dam...
Still trying to find a way to restore the phone to stock without a USB connection...
i also have this "DEVICE NOT RECOGNIZED" on my sony x1.
Drivers
I was having trouble using the USB drivers from Samsung the one's you were using SGH-i897_Captivate_USB_Drivers_5_02_0_2. The computer didn't recognize the phone. If you havn't tryed these already give these a try. Well since I am new I can't post the url. Put these words together (forum.xda-developers com archive index.php t-730638)
superdog404 said:
I was having trouble using the USB drivers from Samsung the one's you were using SGH-i897_Captivate_USB_Drivers_5_02_0_2. The computer didn't recognize the phone. If you havn't tryed these already give these a try. Well since I am new I can't post the url. Put these words together (forum.xda-developers com archive index.php t-730638)
Click to expand...
Click to collapse
Not sure different USB drivers would help, but I went to the thread you show and tried to download the 32bit drivers. This is what I get:
{"error": "Invalid access attempt for this token"}
Oh well, thanks anyway.
I'm still thinking that the problem is hardware on the phone. I've tried four different cables, and three different computers. All show same problem of DEVICE NOT RECOGNIZED.
Still trying to figure out how to restore to stock without USB connection for ODIN so I can exchange for a new phone...
What are your USB settings on the device? Do you have debug mode enabled or maybe you've set the device to connect to kies right away which is producing errors on your PC. What versions of windows have you been trying to connect to? This sounds like a windows problem more than anything else.
No modifications, same error
I didn't make any modifications to my new AT&T Captivate, and I too am getting USB Device not recognized under any of the following conditions:
- drivers installed, no Kies
- drivers installed after Kies
- Kies installed after drivers
No response to any USB connection mode (Kies, mass storage, media player, PC INternet).
Only way to exchange files is to physically remove the SD card and plug it into my PC. Windows XP Professional.
By the way, which of the three drivers is the correct one: ssadadb2.inf, ssadbus.inf, or ssadmdm2.inf? Pardon my ignorance as to how this is supposed to work.
mukherji said:
I didn't make any modifications to my new AT&T Captivate, and I too am getting USB Device not recognized under any of the following conditions:
- drivers installed, no Kies
- drivers installed after Kies
- Kies installed after drivers
No response to any USB connection mode (Kies, mass storage, media player, PC INternet).
Only way to exchange files is to physically remove the SD card and plug it into my PC. Windows XP Professional.
By the way, which of the three drivers is the correct one: ssadadb2.inf, ssadbus.inf, or ssadmdm2.inf? Pardon my ignorance as to how this is supposed to work.
Click to expand...
Click to collapse
You should return your phone if it's new if you can't get your computer to recognize it when you have the correct settings and drivers.
Choose, mass storage. I use the drivers from ODIN, I also have to ones from Samsung's site but they are for Windows 7 64bit. Before you plug any Captivate into a PC for the first time you need to first change the settings to USB Mass storage or Kies will attemp to download drivers. Once you get your phone to mass storage windows should find the drivers. I am not sure, I am running Windows 7, I have an old desktop that runs XP, I could plug my phone in and check for you.
FiveBraids
Settings--developement-- check debugging mode, this will allow you to open a command shell. Using SDK and ADB commands.
Download SDK online.
http://developer.android.com/sdk/index.html
Follow the installation instructions. This will allow you to use the command ADB download to get your phone into download mode. Kies screws my drivers so I don't use it.
Rhiannon224 said:
You should return your phone if it's new if you can't get your computer to recognize it when you have the correct settings and drivers.
Choose, mass storage. I use the drivers from ODIN, I also have to ones from Samsung's site but they are for Windows 7 64bit. Before you plug any Captivate into a PC for the first time you need to first change the settings to USB Mass storage or Kies will attemp to download drivers. Once you get your phone to mass storage windows should find the drivers. I am not sure, I am running Windows 7, I have an old desktop that runs XP, I could plug my phone in and check for you.
FiveBraids
Settings--developement-- check debugging mode, this will allow you to open a command shell. Using SDK and ADB commands.
Download SDK online.
http://developer.android.com/sdk/index.html
Follow the installation instructions. This will allow you to use the command ADB download to get your phone into download mode. Kies screws my drivers so I don't use it.
Click to expand...
Click to collapse
The 2 folders I found that have the drivers are /program files/android/, .... and /program files/samsung. Delete these subfolders that have drivers in them.
Download this : http://www.megaupload.com/?d=N4GC49JL and unzip. In the folders inside (i386 and amd) there are uninstallers. Run whichever version is appropriate for you. If you have no drivers or it doesn't say to reboot, the main folder has a setup program. Run that to install the proper drivers. When you plug in to usb, it will now find these drivers.
Also, for me, ONLY the REAR usb ports work properly with this. Top, front, and ext hub ALL give issues.....
JayPhill89 said:
What are your USB settings on the device? Do you have debug mode enabled or maybe you've set the device to connect to kies right away which is producing errors on your PC. What versions of windows have you been trying to connect to? This sounds like a windows problem more than anything else.
Click to expand...
Click to collapse
USB is set to Ask on connection
Debug off or on makes no difference
All tests have been done on XP machines (3 different ones)
I'm all but positive this is hardware...
Thanks for trying to help!
Rhiannon224 said:
<snip>
FiveBraids
Settings--developement-- check debugging mode, this will allow you to open a command shell. Using SDK and ADB commands.
Download SDK online.
http://developer.android.com/sdk/index.html
Follow the installation instructions. This will allow you to use the command ADB download to get your phone into download mode. Kies screws my drivers so I don't use it.
Click to expand...
Click to collapse
I haven't tried ADB, but I'm not understanding how ADB would be able to connect when the connection to the computer is failing at the driver level. I guess I can give it a try tomorrow.
Thanks for trying to help!
What would REALLY help me is for someone to post a backup taken of a completely stock (ODIN'ed) phone using ROM manager. I'm thinking I could load that on the phone and then be able to return it for a new phone!
Any volunteers...please?
techmik67 said:
The 2 folders I found that have the drivers are /program files/android/, .... and /program files/samsung. Delete these subfolders that have drivers in them.
Download this : http://www.megaupload.com/?d=N4GC49JL and unzip. In the folders inside (i386 and amd) there are uninstallers. Run whichever version is appropriate for you. If you have no drivers or it doesn't say to reboot, the main folder has a setup program. Run that to install the proper drivers. When you plug in to usb, it will now find these drivers.
Also, for me, ONLY the REAR usb ports work properly with this. Top, front, and ext hub ALL give issues.....
Click to expand...
Click to collapse
Big thanks!
Just got my first Android device a couple hours ago (went from ATT Bold to Captivate), and could not get the phone to mount to my PC.... followed your instructions here and BAM! Perfect-o! I have now rooted....
OK, not sure where to go next... was thinking about just getting a new ROM flashed since I am totally stock at this point.... the fun begins!!!
jaxf250 said:
Big thanks!
Just got my first Android device a couple hours ago (went from ATT Bold to Captivate), and could not get the phone to mount to my PC.... followed your instructions here and BAM! Perfect-o! I have now rooted....
OK, not sure where to go next... was thinking about just getting a new ROM flashed since I am totally stock at this point.... the fun begins!!!
Click to expand...
Click to collapse
Great!! Glad it all worked for you. My next advice is, before adding anything READ A LOT!!! =) Decide what you want from the descriptions and issues you will see in the threads....
Happy modding!!
I didn't see, I just skimmed through bit did you try to put the phone in download mode and see if windows sees that (different drivers come in to play in download mode and none of the touch wiz stuff is running)? it would test the idea of a bad port.
then you can still always install linux and use adw from there, linux and macs don't need drivers. if that doesn't work, put insurance on the phone if you haven't already then drop it in the sink and get another one.
also I think although I don't know but I think adw may have something to do with it. and incorrectly uninstalling it. first put the phone in download mode then you can work from there on ways to fix that.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Ok, I've given up trying to get this to work. I'm 100% convinced this is a hardware problem with the phone!
I had another thread going, looking for a way to restore this phone (remove SRE, SU, etc.) without usb/ODIN so I could return it to AT&T. I've figured out how to restore it to stock and will be heading to AT&T in the morning.
Thanks to everyone for their patience and assistance!
Hi,
I had earlier opened a thread regarding this issue. But that was having more than one query and was misleading.
I need to install Froyo JP6 (the official one - no custom ROMs). Currently I'm having JF3.
Kies is not working for me (The MTP application in the mobile opens up, but gets restarted while getting connected to kies, so kies is not recognizing my mobile).
How shall I install JP6 without Kies?
Is it possible to install from mobile itself? (like installing apk file?)
nandihno had told me to install using odin. But i couldn't find it in dev section. Can anybody provide me the link for odin foryo JP6?
Thanks in advance!
Install latest version of Kies - 1.5.3.10093_82.
You can go in setting and Upgrage..
Once the latest version is installed, go into Program Files - Samsung
Delete USD Drivers directory here.
Now go in Program Files - Samsung - Kies - USB Driver
Install the drivers from here.
Once the installation is complete, go to settings in SGS (Galaxy) and unmount Internal SD card.
Connect SGS using USB Key and wait till system detects your SGS.
Once it is done you can use Kies to upgrade to Froyo... However as of today Froyo is not out for India... though there are work around to fool Kies and still download, though I will suggest to wait...
thanks I will try this as well. Well this also work with my issue? I tried to upgrade my firmware using kies, but it failed because of some file missing. I installed kites again, and now it detects my phone when I connect it, but it never seems to make the connection
It just says that it is trying to connect and this goes on forever.
So now I cannot repair my firmware using kies. Can this solution help with that as well?
Shurdus said:
thanks I will try this as well. Well this also work with my issue? I tried to upgrade my firmware using kies, but it failed because of some file missing. I installed kites again, and now it detects my phone when I connect it, but it never seems to make the connection
It just says that it is trying to connect and this goes on forever.
So now I cannot repair my firmware using kies. Can this solution help with that as well?
Click to expand...
Click to collapse
Same problem here. It detects my phone. But freezes in "connecting your device".
@shurdus - when this is happening (connecting ur device), did you notice your phone restarting the MTP application.
I mean, the MTP application will be displaying "installing kies" but after some time, it disappears and appears again in a fraction of a second..
I have to try the solution said by satyawali.
Another doubt - unmounting internal SD card will affect the data?
emmarbee said:
@shurdus - when this is happening (connecting ur device), did you notice your phone restarting the MTP application.
I mean, the MTP application will be displaying "installing kies" but after some time, it disappears and appears again in a fraction of a second..
Click to expand...
Click to collapse
I have a similar problem. I just downloaded the newest version of Kies, but can't get Windows/Kies to recognize my phone. I unchecked "Automatically start monitoring for device..." and "Start Kies automatically..." in the Settings box, and I did the Driver Recovery and rebooted, all recommended in another thread. Still nothing. All I get is some very quick flashing of MTP Application and my home screen opening and closing. Then Windows (Win 7, 32 bit) tells me it couldn't do something and to contact the device manufacturer.
Have you found a solution?
Sent from my GT-I9000 using XDA App
SlowRain said:
I have a similar problem. I just downloaded the newest version of Kies, but can't get Windows/Kies to recognize my phone. I unchecked "Automatically start monitoring for device..." and "Start Kies automatically..." in the Settings box, and I did the Driver Recovery and rebooted, all recommended in another thread. Still nothing. All I get is some very quick flashing of MTP Application and my home screen opening and closing. Then Windows (Win 7, 32 bit) tells me it couldn't do something and to contact the device manufacturer.
Have you found a solution?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I haven't found the solution yet.
I guess the only solution is to format the SD card and then try. But I'm not willing to do that So no froyo for me... If only there was an OTA or froyo installer it'd be great
1. Uninstall KIES
2. Uninstall "SAMSUNG USB Driver For Mobile Phones".
3. Reboot your PC
4. Brows to "Program Files" (windows 32bit) or "Program Files (x86)"(windows 64bit) and remove the folder "Samsung".
5. Run "regedit" from Command Prompt and look in HKEY_CURRENT_USER\Software and delete the "Samsung" folder.
6. Right click your C-drive and choose "Properties", click "Disk Cleanup" and check "Temporary Files" and hit "OK".
7. Install KIES and reboot your PC.
8. When booted, don't start KIES yet, just connect the phone and let windows install the drivers for it, unplug the device when done, start KIES and connect the phone.
That should work out for you..
^ thanks. gonna try it now. Will let u know
@[Ramad] - even this didn't work.
The problem is in the phone - i can clearly see it. I guess, a factory reset will do it. Is there any backup software that can backup including the application data/caches ?
isn't there a download link for the new and original Froyo? there are too many pages and it's quite hard to find what you want (I've found Froyo but not the original one, I think, and I've found plenty of advices for kies but I don't want to do all that unistall-delete traces-install again, when there's a simpler way with odin)
Kies problem is related to the ammound of MP3's on your SGS!
Because MTP is a MP3 player connection protocol it's using some MTP Windows media player driver to connect. If you have all MP3 on an external SD card, just remove it and Kies will work fine. Otherwise remove or rename your MP3s to make it work.
Seriously this worked for me, credits to a user of some forum (can't find the post).
Force close all d launchers before connecting d phone to kies its very necessary step hope it will work
It's unbelievable... the best Android phone has the crappiest PC companion. Seems everyone has exactly the same problem with kies.
As far as I've read it's related to files with longer names stored inside the internal memory. Come on! The old Palm Hotsync didn't suffer from such stupid things!
I think we should start a global petition for Samsung to fix that. My wife has a 10 bucks nokia that has a far leaner/better/functional PC companion.
@nagash1979 - by saying remove it - u mean "all mp3/flac and media" in the external card?
@ srajoria - did that. In fact. uninstalled laucnher pro and then tried. no use.
@c3p9 - i don't think its a deal breaker for this phone. As there are alternatives for kies (like es file explorer for wireless transmission of files). But if only there was an OTA update, then no need of kies at all
@nagash1979 - i couldn't find any windows media player application running in the background. thanks anyway....
Finally I got the solution for the KIES problem.
I had recently downloaded winamp beta from android market. And when connected the phone in usb storage mode when winamp was open in PC and phone, my phone was detected as mass storage. And when I opened Kies, it also detected my phone (finally!), but asked me to connect to kies mode. I removed the cable and connected again in kies mode. And it worked like a charm! WOW!
But it's not working everytime!
Edit: The Mass Storage worked 4/10 times. Kies worked only once out of 10 tries. Everytime a alert message to turn off the SD card is popping up which is very irritating. Dunno how to fix that....
Atleast I was able to connect my phone with the PC using USB Mass Storage mode after a very long time - took the backup of all camera files
If you have latest version of Kies installed and drivers working and experiancing MTP crashing issue on phone then it is long file name issue.
To solve this, connect your phone in media mode and mount the card on system. Use attached utility and search long file names on phone and delete them.
Now connect Kies you should not get MTP issues.....
However this does mean this crappy software (Kies) will still detect your phone...
Try to use Antroid Manager will be satiafied. I have uaed it works fine over Wifi.
Sent from my GT-I9000 using XDA App
Hi everyone,
I have an AT&T Captivate SGH-i897 (2nd hand) and i can't mount the phone to my laptop (winXP 32bit). When i plug in the cable to the phone and then the PC i get the "device not recognized".I've donwloaded the Samsung drivers from the xda wiki page and extracted them and tried to update the driveres via Device Mng ,but didn't work.Also dl'ed the Samsung drivers 5.0.x instaled ,and still nothing.USB Debugging is on...
So to recap,my top can't recognize the phone('s internal sd card) so plz help ???????
Try this, go into usb settings and choose "mass storage"
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
install kies
I would also recommend trying to fully uninstall all the drivers that associated on your pc with your phone (samsung or otherwise), and then reinstall the drivers before you plug in your phone. Then try to reconnect.
Just covering the basics. Assuming your phone is working correctly.
You have tried multiple USB ports on your computer, particularly those on the back if it's a desktop.
You have installed correct drivers (x86 or x64)
" for the correct operating system.
You have uninstalled the drivers before trying to reinstall.
You've tried to get Windows/ Mac to find them online (assuming you're using versions of OS that support doing that)
You've first tried Kies mini before full version, uninstalling in between. (Kies full version isn't supported for US, there are workarounds, but that's a different discussion)
On the phone you tell the phone to connect 'USB storage' (from the pull down menu after connected or in the settings)
I too am having problems with USB connectivity on a notebook with Win7/64. The usual failure mode is Windows not recognizing the USB device. I have followed ZBigT's basics, step by step and still cannot connect.
FWIW, my registry is awash with Samsung entries, some of which cannot be deleted.
I've even tried the AIO Toolbox application (to install the 64 bit drivers) to no avail.
Any other tips?
Is usb debugging turned off?
o hey guys sry for keeping u waiting,
i menaged to install ginger ,
the problem was my lap....rusty old bucket!!!!
had my friend come over with his lap and it worked like a charm ,
the problem is now i need a new one ;(,
damn
mrhaley30705 said:
Is usb debugging turned off?
Click to expand...
Click to collapse
Yes. Still no love. Have tried:
usb_drivers_GalaxyS_x64
SGH-i897_Captivate_USB_Drivers_5_02_0_2
mini-KIES
Kies
AIO
uninstalling reinstalling each time
When I plug in the Captivate, any of 3 USB ports on the laptop, Windows gives the "Unrecognized Device..." message.
Go to settings/about phone. Look at the very bottom to see what rom you are running.
mrhaley30705 said:
Go to settings/about phone. Look at the very bottom to see what rom you are running.
Click to expand...
Click to collapse
Paragon RC6.0
FWIW, I also have a Win7/64 desktop with the usb_drivers_GalaxyS_x64 installed and that works fine; can connect see "drives", use ODIN, adb commands etc.
It just the notebook, which I would like to be able to use to connect, especially when I travel, which has issues.
mabovalu said:
Paragon RC6.0
FWIW, I also have a Win7/64 desktop with the usb_drivers_GalaxyS_x64 installed and that works fine; can connect see "drives", use ODIN, adb commands etc.
It just the notebook, which I would like to be able to use to connect, especially when I travel, which has issues.
Click to expand...
Click to collapse
Check in program files for a Samsung folder. There may be remnants from old drivers that need to be manually deleted.
mrhaley30705 said:
Check in program files for a Samsung folder. There may be remnants from old drivers that need to be manually deleted.
Click to expand...
Click to collapse
Thanks for sticking with this. I was able to connect. I as focused on the Registry remnants, but your advice to clear out the Samsung folder in Programs worked. Thank you.
Additional comments: I am now running the Dlev ROM, it's OK, but when I plugged in the USB cable, just to the phone, it launched the Alarm Clock app! So I deleted that.
Then on the first of my four USB ports I got a USB driver failure to install, then the Windows Unrecognized USB device on ports 2 & 3. On port 4 it worked. (This is a Lennovo/Thinkpad notebook.)
I used the usb_drivers_GalaxyS_x64 package as that also worked on my desktop.
Thank you very much.
Hello folks,
I'm facing this "please insert a disk" issue when connecting my Note to computer via USB Debugging mode / Mass Storage Mode.
I'll let screenshots in the attachment explain itself. #1 shows the screenshot of devices menu when the phone is plugged into the computer in DEBUG mode; #2 shows the screen after I've clicked "connect USB storage" from the drop-down list of the phone; #3 shows what happens when I try to open one of the two "removable disks".
MTP mode works fine, as well as Kies connection. As I finally started exploring the potential of Android platform, I realized that MTP and Kies connection are the most useless connection options for me, and I'd rather leave it in debug mode all day. So has anybody experienced this issue, or had any suggestion on the solution?
As always, many thanks in advance, and many thanks button clicks afterward!
p.s.,
Desktop OS: Win7 Pro X64 SP1
Note: 2.3.6 Stock LB1 Open Germany Firmware, CF rooted LB1 kernel.
Also, I should have all the latest official device driver from Samsung, as I have the latest version of Kies installed (and I discovered a driver folder under Kies' installed location). I'm not so sure about adb driver, but I was able to find the Note to be listed under devices by typing "adb devices". So.. I don't know where could've gone wrong.
Help anyone?
This really sounds weird... I was facing problems of the Galaxy Note not being detected on several Windows7 32/64-Bit SP1 computers as well but this was gone after I installed SAMSUNG_USB_Driver_for_Mobile_Phones.
You are right - from all that i know all required drivers should be available when KIES is installed on your system. Whatis even more strange is that your device seems to be detected as two partitions are available and are displayed in Explorer...
So I would test the following:
- check if your device manager lists any unknown devices
- Uninstall KIES and try to find the SAMSUNG_USB_Driver_for_Mobile_Phones and install those
- check all available USB ports and see if this solves the problem
- try another USB cable
- make sure your (external) SD card is formatted with a Windows compatible file-system e.g. FAT32
Hope this is helpful and helps solving your problem.
Thanks for your reply!
My device manager basically listed all the drivers/devices associated with the phone:
My Device manager shows devices:
Samsung Android Composite ADB interface
Android UMS Composite USB device (x2)
SAMSUNG Android USB Modem
USB Mass Storage Device
USB Mass Storage Device (Android)
I've attached the screenshot when all the drivers being installed when the phone is firstly connected to the computer. Also in the device manager, everything shows "this device is working properly"
I then decided to test with another Note of my friend's (On the same computer). Her Note has no SD card in it, and is completely stock ROM non-rooted LA4 Open Germany firmware. The same thing happened.
One thing worth mentioning: Yesterday, this worked only for once. When I initially encountered this issue, I restarted my computer, and boom, my phone was connected in Debugging mode! However, once disconnected, and I tried to connect it to the computer again, this issue came back. And afterward, no matter how I restart my computer, the phone won't get connected.
I also tried all USB port (USB 2.0 and 3.0), three different cables (2 of them are Samsung OEMs) and failed to address the issue.
I'm nearly exhausted but I will never give up, as this is my only computer and my only phone (haha), and without solving this issue, I'm never gonna be able to view the phone as a USB storage and easily transfer the file from my computer to the phone.
I'm going to try the last thing that I haven't done from the list you posted:
- Uninstall KIES and try to find the SAMSUNG_USB_Driver_for_Mobile_Phones and install those
I believe that I can keep the driver folder in the Kies' folder, as I believe those are the newest Samsung driver, given that the Kies was the latest release version.
So far, I can only conclude that this issue is not related to specific phone but the Windows 7.
And thank you for your help btotaku!
If anyone has any insight into this issue, please help me. Thumbs up for you!
BTW, I was able to extract both SAMSUNG_USB_Driver_for_Mobile_Phones.exe from under Kies' installation path under Program Files x86 folder, and an uncompressed folder of all kinds of drivers for Samsung device, called "USB Drivers".
And looks like I was wrong. The newest version of SAMSUNG_USB_Driver_for_Mobile_Phones I had was 1.4.8. While the driver that came with the newest Kies was 1.4.103
I'll post back soon
Reinstal Windows on your PC bro.
Problem fixed.
is that your internal memory or the sd card?
Same thing happens either with SD card in the phone or not
avetny said:
Reinstal Windows on your PC bro.
Problem fixed.
Click to expand...
Click to collapse
That's the last thing I would do
I've added a few apps to my S3 and altered a few things on my PC and now I can't connect via mtp or ptp. It goes through the usual "installing drivers" and then fails. I've tried pulling the battery and removing the sim and micro sd card then putting everything back. Tried it without the card (currently having to transfer files via a card reader so - at least the card's fine) but to no avail.
I've had a go at uninstalling the drivers through the device manager, rebooting and scanning for hardware changes. I've tried downloading the drivers without kies but it didnt work out (I cant remember the site or the url, but ended up with the following file SAMSUNG_USB_Driver_for_Mobile_Phones) It didn't auto install but even when I tried to point Windows to the folder on my C drive, nothing.
I've spent a couple of hours trawling the net including on here and tried all sorts.
I'm rooted, using the stock 4.1.2 ROM with Windows 7.
I can't use Kies as when it was installed the first time it wrecked all my Synctoy sync's so I really could do with another option please guys.
Dial *#7284# on your phone to access PhoneUtil and select 'Qualcomm USB Settings' at the bottom.
Now select 'MTP + ADB' and press 'OK' to return to the previous screen. Now press your 'Back' key to exit PhoneUtil. Your phone is now back to default USB operation.
Raistlin1158 said:
Dial *#7284# on your phone to access PhoneUtil and select 'Qualcomm USB Settings' at the bottom.
Now select 'MTP + ADB' and press 'OK' to return to the previous screen. Now press your 'Back' key to exit PhoneUtil. Your phone is now back to default USB operation.
Click to expand...
Click to collapse
Thanks for the quick reply.I did that and it was set to mtp + adb...
When I then connected it it tried installing the driver and I got..
Driver device software was not installed.
Please consult with your device manufacturer for assistance getting this device installed
MTP USB Device X Failed
I tried updating the MTP drivers again from device manager but this time got
Windows encountered a problem installing the driver software for your device
Windows found driver software for your device but encountered an error while attempting to install it.
SAMSUNG Mobile MPT Device
This device cannot start (code 10)
From what I'm reading it's a computer error not the phone. Can anyone suggest a new set of drivers to download (that doesnt involve Kies) as I've had issues with picking up harmful software from random sites when I've been struggling to find drivers.
I tried using the suggestion at the bottom of here r.e.Portable Devices and deleting the Upperfilters string Link but also to no avail.
Oh, and yes I've tried different ports and cables.
Well that's me done for the evening! I've tried everything mentioned in this thread including updating java and windows media player and all the afformentioned stuff but still no dice.
Could it be the actual drivers or a random windows 7 setting that I haven't yet tweaked since my clean install of windows??
http://d-h.st/YpV
Here are the correct drivers, install then reboot your pc.
Raistlin1158 said:
Go here for drivers.
---------- Post added at 01:00 AM ---------- Previous post was at 12:57 AM ----------
http://d-h.st/YpV
Here sre the correct drivers, install then reboot your pc.
Click to expand...
Click to collapse
Sorry,I know I'm tired but I can't see a link on your post...
Highlighted in red
The newer drivers don't really wwork with the 9305 so find some older drivers. That works for me
Sent from my GT-I9305 using xda app-developers app
Thanks for the tip.any suggestions as to where I can download these older drivers? I'll try the previously mentioned ones first, but I'm starting to think it might be the drivers themselves
woldranger said:
Thanks for the tip.any suggestions as to where I can download these older drivers? I'll try the previously mentioned ones first, but I'm starting to think it might be the drivers themselves
Click to expand...
Click to collapse
The ones I posted work fine on my 9305 so you shouldn't have any issues and as you can see from the site they are nearly a year old.
Try them what have you got to loose, if they don't work you are no worse off
Raistlin1158 said:
The ones I posted work fine on my 9305 so you shouldn't have any issues and as you can see from the site they are nearly a year old.
Try them what have you got to loose, if they don't work you are no worse off
Click to expand...
Click to collapse
Cheers, yeah, I was going to try them but I wasn't at my pc at the time I wrote that. I've downloaded the exe package but now it seems there are still drivers to uninstall - I uninstalled the drivers through device manager and went into my C drive and removed the SAMSUNG folder with the USB drivers in it. I'll restart the pc and hope that helps with the removal....
woldranger said:
I've added a few apps to my S3 and altered a few things on my PC and now I can't connect via mtp or ptp. It goes through the usual "installing drivers" and then fails. I've tried pulling the battery and removing the sim and micro sd card then putting everything back. Tried it without the card (currently having to transfer files via a card reader so - at least the card's fine) but to no avail.
I've had a go at uninstalling the drivers through the device manager, rebooting and scanning for hardware changes. I've tried downloading the drivers without kies but it didnt work out (I cant remember the site or the url, but ended up with the following file SAMSUNG_USB_Driver_for_Mobile_Phones) It didn't auto install but even when I tried to point Windows to the folder on my C drive, nothing.
I've spent a couple of hours trawling the net including on here and tried all sorts.
I'm rooted, using the stock 4.1.2 ROM with Windows 7.
I can't use Kies as when it was installed the first time it wrecked all my Synctoy sync's so I really could do with another option please guys.
Click to expand...
Click to collapse
Having the same problem. but I am on 4.3 rom using carbon rom a few days then transferred to pac man rom. My cellphone is not detected in my computer but it is being detected in the safely remove usb options. I tried to use a usb otg cable and a flash disk. No notification is seen on my phone but I can access the files on the flash disk (using usb otg cable) in the file manager. Tried the *#7284# but error occurs and says connection problem or invalid MMI code. I found that MTP udb device says failed
Raistlin1158 said:
The ones I posted work fine on my 9305 so you shouldn't have any issues and as you can see from the site they are nearly a year old.
Try them what have you got to loose, if they don't work you are no worse off
Click to expand...
Click to collapse
It made no difference whatsoever. I used a utility to check for an remove the samsung drivers (USBDeview) as well as uninstalling through device manager and removing with windows "products and features" but even then, when I tried installing the new drivers it mentioned previous drivers. I restarted after each stage of the process.
I've even tried connecting it in download mode and it shows in device manager.
Could there be some remnant of the software I used to root that phone that might be causing the issue??
I'm due to leave the country in 5 days and have loads of things to sort (also have a family member going into hospital for major surgery tomorrow) so I can't just devote all my time to this - but I need to at least know that it's not the phone (I dont have another win 7 computer to try it on).
woldranger said:
It made no difference whatsoever. I used a utility to check for an remove the samsung drivers (USBDeview) as well as uninstalling through device manager and removing with windows "products and features" but even then, when I tried installing the new drivers it mentioned previous drivers. I restarted after each stage of the process.
I've even tried connecting it in download mode and it shows in device manager.
Could there be some remnant of the software I used to root that phone that might be causing the issue??
I'm due to leave the country in 5 days and have loads of things to sort (also have a family member going into hospital for major surgery tomorrow) so I can't just devote all my time to this - but I need to at least know that it's not the phone (I dont have another win 7 computer to try it on).
Click to expand...
Click to collapse
Just got the same problem. But my problem is already solved. Just flash a new rom. In my instance, I flash ripper rom