Assistance please. I have done a search but have been unsuccesful.
I am trying to upgrade a collegues Wizard from 2.21 but the upgrade fails with an error message saying connection lost. At the Wizard end the problem is that it won't enter the bootloader mode. I have tried to force it into this mode manually but the screen just goes black. I have upgraded this same phone twice before with no problems.
Any ideas????
Edit:- After another 5 hard resets I was eventually able to force it into bootloader mode. Applied my upgrade succesfully. No further poblems.
Related
Hi Tried to upgrade the device to latest tmobile 2003 rom. Upgrade went fine. booted it then softreset.
But now it gets to the tmobile and resets. seems stuck in the loop. Now I cant get it to bootloader to try and redo or to use the mitty util. Power and record or power and camera are no longer taking it to booter any ideas?
Hello all,
as the title says, one of my touch diamond's is stuck in bootloader screen.
I didnt do anything in between it working and not working, it was on my desk, put it there working, got it 5mins later, and it was in bootloader screen (tricolor screen).
What i've already done to try and fix it:
flash it with the original HTC rom, flash completes succesfully, phone reboots to tricolor screen, so no solution there.
install mtty and format the phone, this completes, reboot the phone, again goes to the bootloader.
reflash the phone with original rom after cleaning it with mtty, flash again completes succesfully but when it reboots after flashing it just goes to bootloader again.
Tried to flash a Hardspl: stuck at 0% and stays there. so that doesnt work.
BUT! when in mtty i give the "boot" command, it DOES start to boot WM. but then again, when i turn the phone of, and on again, or it reboots because of first start after flash, it goes to bootloader again. The VOLDOWN button is NOT stuck, cause when it boots i can use the vol buttons perfectly fine.
Anyone got an suggestion in how to unbrick it? i have a second, perfectly working diamond here too, if that helps in any way.
Some more info ive just seen in mtty, when i told it to boot, it said ONE BAD BLOCK IN CE, remove block ---- to ---- (dont know the exact numbers anymore)
hi..i had something like that...
just download this.
"RUU_Signed_1_93OliNex_HSPL_UnsignedEdition"
it's only 1.7MB and it's will make it work.. atleast it did the job for me...
Hi,
My T mobile touch diamond stuck in bootloader screen? Any experties to help me please.
Thanks in advance.
Hi, I have an htc touch diamond that will not boot past the splash. It turns on, says htc diamond without red letters. I have tried soft reset & hard reset, doesnt work. also phone does not turn on by power button but only the reset button. Every time I try to flash or unlock it says "Error 262", I've tried soft reset and continuing the setup and the error comes up again. I've tried the whole thing of changing the driver from 2007 to 2003 and completed it and still has not fixed error 262. I've tried many different roms and the only ones that bypass 262 are the .exe file rom setups, but after installed still doesnt boot past splash screen. the farthest ive gotten with one .exe is going through the phone setup, but after the setup the phone turns off. the only way my computer notices the phone and the way i flash the phone is when it is in bootloader. have also tried the bootloader where you press the back button. I've been trying so hard to fix this phone but it just wont happen. please help?
ryan21x5 said:
Hi, I have an htc touch diamond that will not boot past the splash. It turns on, says htc diamond without red letters. I have tried soft reset & hard reset, doesnt work. also phone does not turn on by power button but only the reset button. Every time I try to flash or unlock it says "Error 262", I've tried soft reset and continuing the setup and the error comes up again. I've tried the whole thing of changing the driver from 2007 to 2003 and completed it and still has not fixed error 262. I've tried many different roms and the only ones that bypass 262 are the .exe file rom setups, but after installed still doesnt boot past splash screen. the farthest ive gotten with one .exe is going through the phone setup, but after the setup the phone turns off. the only way my computer notices the phone and the way i flash the phone is when it is in bootloader. have also tried the bootloader where you press the back button. I've been trying so hard to fix this phone but it just wont happen. please help?
Click to expand...
Click to collapse
If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
for official rom you can find at http://www.shipped-roms.com/index.php?category=windows mobile&model=Diamond
Hi,
When I update rom through "LGMObile update", I got some error on this. I close the program and reboot my mobile. But the mobile just screen as attached.
I have recovery mode in my device and I tried to wipe, and flash cooked ROM. Everything is ok and no error but the screen still on S/W upgrade mode....
Anyone to know how to boot as normal? Many thanks~!
Hi,
I tried to flash CM11 in my Phone with Odin but it gave a fail as result. So I tried it again with an other firmware but it wasn't possible.
Everytime I connect my Phone to my computer or to the charger is goes into a bootloop. It gives me a screen that says "firmware upgrade encountered an issue" for 2 seconds and it shutsdown, it restarts and give's me the screen with error back.
I think the problem is the CM11 I tried to flash is for an I8190 and I have an I8200 (I found that out to late
I have search google and this forum for 2 days but I didn't find a working solution.
I tried to get into recovery of dowload mode but that's impossible due to the boot loop.
Kies can't connect to my Phone. I checked my powerbutton and it's not stuck.
I removed the battery a couple of times for more than 2 hours, ...
Does someone know what I can do so get my Phone working again?