I have upgraded G4 IPL & SPL on my G3 Vario and now I cant power it on at all, hard reset doesn't work, cant even enter to bootloader It's totaly bricked now. What should I do??? Thanks.
Search the forums for JTAG. Not easy but its doable I understand.
Good luck.
Does the Qtek 9100 have JTAG output on motherboard or do i have to solder the wires??
... or is it able to do it by classic USB cable (for example emulated as COM...) ??? I really dont like to solder the wires
when i upgrade my device at 98% its hang up
and i make reset
then the device didnt work when i press power button
what can i do with my device
Iam from palestine and the near service center for imate is in ksa
icant send it
can i resolve the broblem with my self
Your fatal mistake is reseting your phone...it wasnt done flashing yet. The RUU(flashing prigram) often hangs up near the end for 1-2 minutes, and then it completes. I would say that you need to get your phone repaired now, seeing as if it wont even power on, that its more than likely damaged the bootloader:/
Hashem_12321 said:
when i upgrade my device at 98% its hang up
and i make reset
then the device didnt work when i press power button
what can i do with my device
Iam from palestine and the near service center for imate is in ksa
icant send it
can i resolve the broblem with my self
Click to expand...
Click to collapse
Always post the version of the phone and which rom you were trying to upgrade with ?
Check your battery,is it fully charged or working.Its always recommended to get the battery fully charged before flashing.
It might be due to discharged or dead battery that it doesn't power on,first confirm the status of the battery.
If the battery gets charged or working,get the phone into Bootloaders (multicolor Screen),if it gets there,its safe.
i try a new battry but there is no power my device is wazard g4 and i upgrade with black diamond 2 after i unlock my device (i dont remember the no but at the end there write olip)
i think that i need a new device becuase there is no light on charge when i plug in the adapter and not start when i press the power button
thanx alot
If your not intimidated by working on your phone, you could try buying one off eBay with a broken LCD and using the motherboard out of it in your phone. Worked for me and now I have a G3 instead of a G4!
what does it meat when i unplog the battry there is flash light from the screen
can any body explane this
it means there is power going to the device,but as it cant boot up it simply flashes the backlight on the screen
scousemartin said:
it means there is power going to the device,but as it cant boot up it simply flashes the backlight on the screen
Click to expand...
Click to collapse
so there is away to repare mt device??
i remember that there is an spl v1 aor something like that when my device turn off
and when my computer hang up my device went to boatloader mode and i read the numbers of ips & spl. then i found that i have to flash rom (wizard love) but i turn off my device to keeb the battrey charge to complet flashing and that is the last time i see my device working
Which is your phone,post the full data,make/model of your phone ?
zabardast_1 said:
Which is your phone,post the full data,make/model of your phone ?
Click to expand...
Click to collapse
not understanding
my device wizard g4
Ok, Perhaps you applied HardSPL and the it must be displaying IPL 2.21.0001 and SPL 2.21.olip, Right ?
And when you tried to upgrade Black Diamond,it got stuck up on Bootloaders or it was working on Black Diamonds ? you say, your computer hang up and phone got stuck on Bootloaders,did it hang up while flashing ?
Did you actualy flashed 'wizard_love rom,or you were planning to flash but it got stuck.
Why I ask all this is coz,if you flashed wizard_love,your phone is HardSPL,,it'll get bricked with wizard_love rom as it has IPL/SPL in it. But if you didn't flash wizard rom and it goy stuck before that,than,its a dead battery.
zabardast_1 said:
Ok, Perhaps you applied HardSPL and the it must be displaying IPL 2.21.0001 and SPL 2.21.olip, Right ?
And when you tried to upgrade Black Diamond,it got stuck up on Bootloaders or it was working on Black Diamonds ? you say, your computer hang up and phone got stuck on Bootloaders,did it hang up while flashing ?
Did you actualy flashed 'wizard_love rom,or you were planning to flash but it got stuck.
Why I ask all this is coz,if you flashed wizard_love,your phone is HardSPL,,it'll get bricked with wizard_love rom as it has IPL/SPL in it. But if you didn't flash wizard rom and it goy stuck before that,than,its a dead battery.
Click to expand...
Click to collapse
my computer hang up at 98% in flashing wizard
i didnt flash wizard_love rom yet and i try to change the battrey 3 time with my friends but the device couldnt start ,,, is this problem from the battrey??
now iam going to buy new battrey to try and i hope to resolve this.
i've got new battrey but still not working
so what can i do
can any body tell me where i can buy mainboard but not from e-bay.
so,,,,, no one know where ican buy new mainboard??
Hi, look at this. http://forum.xda-developers.com/showthread.php?t=276963
I repair my device successfully.
I tried to upgrade my device to WM6. Unfortunately it seems completely died after upgrade. It does not show anything and I cant even go to bootloader mode. Also it can not even charge the battery. Just the red LED is lit up after I remove the battery cover. Please help me!!!
There is no upgrade to WM6 for the 6515 it's not possible
masoud252000 said:
I tried to upgrade my device to WM6.
Click to expand...
Click to collapse
and how did you do that?
I have downloaded WM6 for seimens SX66 and I tried to upgrade my beetle device using this software!!!!!!!!!!!!!!!!!!!. after I received Upgrade completed successfully, I did hard reset on my device, but it does not power up at all. Please help me!!!!!
Why sx66???
Bootloader...rom...everything different!!!
I hope u can restore old rom...or you'll have a bricked device...
If you can't resolve the issue I could by your unit 'cause mine has a bricked screen. Please let me know if you wanna sell it, thanks!
so i have a bricked tmobile g1 on my hands. my friend tried to flash haykuro's spl and did it wrong so now the phone is effed it does not say "tmobile G1" at the bootup screen, it says HTC and stays there. trying to get to bootloader and recovery mode is impossible because the phone will not go into those modes. the spl is a "danger spl". is there any possible way to fix this?
as of right now...no there is no way to fix this...
sorry
if ur phone is under warranty just call tmobile and say ur phone would not turn on after a backup app asked u to restart ur phone
worked for me with the same problem
flashed the spl before the radio and bricked. called them and told them an app caused it and got my device within a week :-D
Ask for a replacement, and lie about what happened
But yeah, your current G1 is bricked if you cannot access recovery or bootloader.
It's a bad sign that it says htc and not g1 on the boot screen. If they see that then they might charge you because it's obvious you flashed the wrong spl for the phone.
customer brought HD7 in dead condition he told that he was updating the device and due to low batt it gone dead,no power and no boot mode.so i resurrected in riffbox.now it's hang on htc logo and when in bootmode it gives the info as ;
PD29*** SS-BC(4K)
SPL -5.11.2250.0(134400)MNG
sd sandisk 15193MB
partition info-v211v413
F400
but it doesn't shows "serial" and it doesn't connect to pc.
what should i do,pls help
If you're telling people that you can fix their phones, then you need to be able to fix it without having to come to a forum for help. Especially if you're charging for this service.
Evo4eva said:
If you're telling people that you can fix their phones, then you need to be able to fix it without having to come to a forum for help. Especially if you're charging for this service.
Click to expand...
Click to collapse
thanx for your reply,as i have never challenged u or my customer that i can repair any handset that i have recieved.i have discussed here the fact that its the customer's fone.and your reply is not to the context.Just read my problem and u have any solutions pls advice for the same if not just go to other post.
hi majeed
i have read in another post, that someone else has had the same problem...no seriel or usb on screen, dont worry about it.
once in bootloader just plug phone to pc and do what you have to do...still worked for them.
cheers and have a gr8 day
Thanx bro for reply but i have tried connecting in same condition to different pc's but i get error :260
not sure what your trying to do after you are in bootloader??
you have bootloader 5.xx
therefore you can only install same stock rom or find same but earlier rom to downgrade ur hspl. must be same region too.
cheers and have a gr8 day
Hi jhonny,
i tried to downgrade bootloader according to tutorial of ansar and his rom found somewhere in this forum and got hspl and rspl.first i tried to use rspl of dft but i could not succeed and got an error and then onwards no "serial" in boot loader screen and the result not at all connecting to pc.tried again resurrectin with riff but no use.
majeed said:
customer brought HD7 in dead condition he told that he was updating the device and due to low batt it gone dead,no power and no boot mode.so i resurrected in riffbox.now it's hang on htc logo and when in bootmode it gives the info as...
Click to expand...
Click to collapse
hi majeed, is the unit still under manufacturer warranty
HI MAJEED...
WHAT EVER I UNDERSTAND THAT YOU HAVE HALF BRICKED YOUR DEVICE.
YOU CAN ONLY REPAIR YOUR DEVICE USING GOLD CARD METHOD.
http://forum.xda-developers.com/showthread.php?t=893152