I have upgraded G4 IPL & SPL on my G3 Vario and now I cant power it on at all, hard reset doesn't work, cant even enter to bootloader It's totaly bricked now. What should I do??? Thanks.
Search the forums for JTAG. Not easy but its doable I understand.
Good luck.
Does the Qtek 9100 have JTAG output on motherboard or do i have to solder the wires??
... or is it able to do it by classic USB cable (for example emulated as COM...) ??? I really dont like to solder the wires
Related
For mistake install in my G4 the rom RUU WIZARD 10.2.0.8 2.61.11 PV FIX2, it has changed the IPL to 3.08 and now does not ignite me, does not synchronize me, anything of anything. Died. Can I recover her?, and since?
luisprieto said:
For mistake install in my G4 the rom RUU WIZARD 10.2.0.8 2.61.11 PV FIX2, it has changed the IPL to 3.08 and now does not ignite me, does not synchronize me, anything of anything. Died. Can I recover her?, and since?
Click to expand...
Click to collapse
Changing the IPL and/or SPL on a G4 usually turns the phone into a brick (it: its dead). Try getting to the bootloader screen (hold down the camera button while you power it on.) If you can get to the "rainbow" screen then you can hook up your USB cable and flash your carriers latest official rom and see if that corrects this. But my guess is you can't even get to the bootloader screen due to what has happened.
Beyond that, you will need to look into doing a JTAG recovery. I've never done this and don't know how its done (have just seen some posts indicating people with bricked phones were able to save their phone this way, so you will have to search for it (or hope one of those people posts back here)).
Since this is a G4, I'd suggest you post in the Wizard G4 forum and you might get more help there. Then use the search feature here (or google search) to see what you can find out about JTAG on a wizard.
Good luck
Hi, i followed the instruction fro unlocking my device (Qtek 9100) and then installed IPL_SPL_3.08. After that i tried installing Crossbow_Reloaded_1.7_Final and my device rebooted and it now doesn't turn on! I tried removing the battery for a while but still... Is there anything i can do to save my device?
PS: i first installed a 2.xx IPL and SPL but then the "Crossbow_Reloaded_1.7_Final " would not load saying it was incompatible URR version or something similar, so i instaled IPL/SPL 3.08.
My device now won't start or charge. It seems dead Is there abything I can do about it?
thanks
If you didn't figure out your device is G3 or G4, and you can't even power on the device, then it is a brick now. (G4 Wizard cannot upgrade IPL/SPL)
You need to either recover it using JTAG or replace the unit if possible.
thx for the reply.
Firstly i followed this guide:
http://forum.xda-developers.com/showthread.php?t=298613
And at the following step:
"0. First determine if you got a G3 or a G4 device. When you turn on your device from can can see you're IPL and SPL version on the screen. If you got IPL/SPL 1.xx or 2.xx you've got a G3 device. If the IPL/SPL shows 2.xx.xxx1 you've got a G4. Go to step G3.1 if you got a G3 and G4.1 if G4."
My device had 1.xx IPL/SPL and i used "Wizard_Love_2.26.10.2_WWE_Novii_CF2" to update it to 2.26. the procedure was successful.
I then CID-unlocked the device and then flashed to "AKU2" successfully once again.
I then flashed to IPL/SPL 3.08 (since i determined i had a G3 device ) and that's when y device did not start again.
Providing the above can anyone tell e wether there is any way of saving my device?
thanks
starkwong said:
If you didn't figure out your device is G3 or G4, and you can't even power on the device, then it is a brick now. (G4 Wizard cannot upgrade IPL/SPL)
You need to either recover it using JTAG or replace the unit if possible.
Click to expand...
Click to collapse
So it is possible to save my device by using JTAG? (which i don't know what it is yet, so i am going to search the forum a bit to find out).
neochris said:
So it is possible to save my device by using JTAG? (which i don't know what it is yet, so i am going to search the forum a bit to find out).
Click to expand...
Click to collapse
dont put too much hope on this JTAG thing. It is still no details on this yet. Try getting the unit into bootloader mode (3 colour screen) and flash again if possible. If you are not able to get it in to bootloader mode, chances are, you have a bricked.
I took the device to an HTC service store but he said not to expect much and that i would probably need a new mobo. When i hear from him and if the news are bad i will probably try the JTAG thing. Does anyone have some info, links etc about JTAG for Qtek 9100? someplace to start from. If it IS bricked i might as well give it a shot.
Any recommendations always welcome.
neochris said:
I took the device to an HTC service store but he said not to expect much and that i would probably need a new mobo. When i hear from him and if the news are bad i will probably try the JTAG thing. Does anyone have some info, links etc about JTAG for Qtek 9100? someplace to start from. If it IS bricked i might as well give it a shot.
Any recommendations always welcome.
Click to expand...
Click to collapse
Someone posted in the forums in the past few days that they had successfully recovered a Wizard using JTAG, so there is hope.
Edit: The posts are here..
http://forum.xda-developers.com/showpost.php?p=1209390&postcount=137
http://forum.xda-developers.com/showpost.php?p=1209398&postcount=138
I suggest asking nicely for cesarr4 to share the info...
Also, sounds like you had a G3 (since you had a 1.x IPL/SPL to start with) and it sounds like the 3.08 IPL/SPL you flashed maybe was for G4 only..
titus666 said:
Someone posted in the forums in the past few days that they had successfully recovered a Wizard using JTAG, so there is hope.
Edit: The posts are here..
http://forum.xda-developers.com/showpost.php?p=1209390&postcount=137
http://forum.xda-developers.com/showpost.php?p=1209398&postcount=138
I suggest asking nicely for cesarr4 to share the info...
Also, sounds like you had a G3 (since you had a 1.x IPL/SPL to start with) and it sounds like the 3.08 IPL/SPL you flashed maybe was for G4 only..
Click to expand...
Click to collapse
Thanks titus666 . Now i got my hopes up again! I just caled the technician i took my wizard to and he told me there's nothing he could do. (he only could help if the device would turn on apparently, but if it would i could try doing that myself. Wasn't too helpful but i had to try. HTC specialist they say. anyway.)
I just asked cesarr4 for more info and hopefully i will gather enough info and try and fix it myself. Will post my results when i do.
thanks for the replies guys. Much appreciated
Diud you soled the problem?
9100 dead
What's happen?
I aquired recently a second wizard, and decided to upgrade-it.
it had a IPL 1.01 and SPL 1.01...so was a G3. i followed the faria's tutorial, "as i done 100 times with my other wizard"
First i backed up everithing with "WST_v4.2.2"
cidunlocked with lokiwiz
and started with the 2.26 upgrade, and failed a 99% and followed the recover procedure, and tried the recover, but it was allway stucked in splash screen, finaly i flashed in bootloader mode, and sucessfuly recover it, but then.
it had an:
IPL 1.01
SPL 1.01.0001 ?!?!?
so i decided to revert to initial rom...that i backedup.
and with the WST_v4.2.2 tried to restore with the backup, but when i rebooted...nothing happened...just black, and no leds...no battery charge, just a flash on the screen and butoons if i remove the batery, tried with a 100% batery charged, but is the same, so...
can someone tell me what went wrong?
is my Wizard dead?
Thanks in advance.
P.Ferreira
Mmmmm?
Maybe it is!
It seems it has IPL G3
But spl G4!!!!!
Its kinda God damn dead... but does the 1.01 came from provider as the default?
Maybe you skip the step flash buttons rom or upgrade with a G4 ROM...
waiting for other opinions.
+ Que PPC
YEAH ! sure 100% correct there !
Its a mismatch, mixed Bootloaders,G3 & G4,how he got it,only he can explain ?
But,sorry to say,its a dead meat man!
That's why................
zabardast_1 said:
+ Que PPC
YEAH ! sure 100% correct there !
Its a mismatch, mixed Bootloaders,G3 & G4,how he got it,only he can explain ?
But,sorry to say,its a dead meat man!
Click to expand...
Click to collapse
That's why the no id RUU skips the ID of Device, id for IMEI, ID for country... and ID for the IPL and SPL... maybe supporting the Prislav hardSPL for G3 can help us to never again see a wizard G3 bricked Like this...
A minute of silence for the brother's wizard
So sorry men but for the next time re-read please, cause we haven't rom memories in our brains... we have RAM
Thanks for all people. What a sad day......
room for one more in the brick yard?
same thing happend to me , but ipl g4 spl g3
after i ran imei unlocker
i got
IPL 2.21.0001
SPL 2.21
no g3 rom was ever near this device
no hangs no nothing ..100% completed
it comes out this this mismatched IPL / SPL
this is a theory based on nothing ...
when you hung .. i think something got placed in the ipl spl header location
masking or corrupting the IPL / or SPL areas dropping the .0001 from it
yours in the IPL mine in the SPL
lots of bricks out there ... and the phone is out of production
someone should be able to find a service stand or test stand somewhere
just a thought ...
Mmmmm
One more?
Dont you read?
Only possible repair for Wizard is in China, where they exchanges the Bad Flash chip with a repaired one.
Since the JTAG layout is still unknown, nobody can repair it simply by reflashing.
Hi There
plz help me
while upgrading Kjam MY PC restarted
and now My Kjam started Automatically on boot loader no HTC Or Imate Screen
and No Hard reset
Download and flash official k-jam stock rom to recover back to its default status than proceed further.
I has the same problem
sometime ago i had the same issue my F#$kn PC restars and my phone goes directly to vbootloader and it was caused cause i have flash my device with the miniSD in it... but is not prooved some people said that it is not the trouble.... what ever
when you recover your XP just plug your device to the PC via usb in bootloaders mode... unplug your miniSD and if you want.... your SIM card (it doesnt matter at all) and reflash.
if it doesnt works try the method described in my Signature link... Trying MTTY to revives a wizard everywhere stucks!!
But... is recomended do first a reflash in bootloaders... then if not works contact me to guide you trough the steps on MTTY...
Good luck
(OH! be sure that dont use too much your device in bootloaders cause the batt dont charge in this mode and we need more than 70% to reflash)
by the way... is G3 or G4? what info do you have?
zabardast_1 Thanks For Ur Reply
+ Que PPC
My Kjam dosen't Turn on now i will try to reCharge it and i hope ur replay help
My Phone is G4
and plz tell me any thing May help me ..
ThanX Alot
Is your batt
Your batt is dead...
I told you... dont use it cause in bootloaders dont charge....
So try to get an only batt wall charger... or find another wizard to recharge your batt... or get one with at least 70% of charge.
mmm I dont know a lot of G4 devices but maybe you need to reinstall an official Rom like zabardast said but i dont know if its needed to remove the hard SPL ask zabardast maybe he knows.
Hi,
Unfortunally I bricked my Kaiser with a task 2a and read this post next http://forum.xda-developers.com/showthread.php?t=372497
Now I have no bootloader in it. Nothing except Qualcom Modem access via MTTY.
I managed to force usb with Frankekaiser soft and had a white screen on my Kaiser.
Does everybody know if I can flash a booloader with mtty ? Or my Kaiser is dead and need to be send back to HTC
Thanks a lot for your answers
Nobody ?