Database Develop

how to install cab file

I'm a new user of windows mobile products. I just owned my first xda O2 IIs. Can somebody please explain to me how to install a cab file into the device? i'm trying to get Intellipad to work on my O2

I just copy the cab (via activsync) to anywhere on the device.
and run it from the device.
Oh and welcome...There's LOADSA STUFF ON EEAR

Qtek 9090 would not update and is dead now

Hi,
i tryed updating the qtek 9090, after i changed the country id type 1 it started.
It controlled my device and said : update from 1.12 to 1.40 and all the specs.
Then i hit next and id says checking information. It saysthat about 30 minutes now and the active sync connection is lost. Also my qtek looks dead.
I tried the installer again but it wouldn't work
I did a soft-reset and that didn't work also.
What now ? Hard-reset or ?.....
Thanks dudes

Ok, after a hard reset my device shows USB v 2.03 again so that's good ins't it
Now the country id error keeps coming, type is at 1 so what can i do more ?

Hi ThEScReW,
I've had the same problem while trying to downgrade to 1.22GER after flashing my device to 1.40WWE. I found out the modified version of MAupgradeUT that normally works for the Magician was able to flash my device with any BA rom I tried. It doesn't matter whether it's a type I or type II rom. Follow my instructions in the readme.txt and it should work.
Good luck!!!

Ok, i'm real thanks for that but i'm also really not that smart if you think i am.
What should i do with al those files? What to put where and what to do first and what last ?
Thanks :lol: you will be a great help
Where do you live btw in germany ?

Take the 1.40_shipped.exe you have and use winrar to unzip the files in a folder. After that you can copy the 3 .nbf files (nk.nbf, ms_.nbf and radio_.nbf)into the BA_upgrade no more errors folder. Then you start the MAUpgradeUT.exe. If the software says there is an error just press quit and restart the MAUpgradeUT.exe. Next time you try it should work making no problems.
Ps: I live in Bavaria about 50 km away from Munich.

berni_1980 said:
Take the 1.40_shipped.exe you have and use winrar to unzip the files in a folder. After that you can copy the 3 .nbf files (nk.nbf, ms_.nbf and radio_.nbf)into the BA_upgrade no more errors folder. Then you start the MAUpgradeUT.exe. If the software says there is an error just press quit and restart the MAUpgradeUT.exe. Next time you try it should work making no problems.
Ps: I live in Bavaria about 50 km away from Munich.
Click to expand...
Click to collapse
Ok thanks but the roms i have are just 1 exe file and that's an installer. It's as easy as hell. I just have to run de exe and follow the rules on the screen.
If i do what you tell me to do, then i need to download a rom from the ftp with al the files in. Then what do i do with those files? what first, what next , ..... :roll:

When using winrar you can extract all the files of your exe into one folder.
(Right click the exe and under options use "copy all files into folder"
Then take the 3 .nbf files and copy them into the folder with my files. Then start the MAupgradeUT.exe.

berni_1980 said:
When using winrar you can extract all the files of your exe into one folder.
(Right click the exe and under options use "copy all files into folder"
Then take the 3 .nbf files and copy them into the folder with my files. Then start the MAupgradeUT.exe.
Click to expand...
Click to collapse
Ok i'll try it tonight THX

Problem : if i use the rom from dangaard then the exe isn't a rar file, it's just an installer with everything in de exe ..
If i take a rom from the ftp and i unrar it then it are all CAB files and no .nbf files :roll:
Am i stupid or what? Witch version do i need and where do i get it? Maybe a link would do good :lol:
I'm really sorry for those questions, but here normally we just do the installer. I did allready a QTEK S100 and a QTEK 2020 with the installer from dangaard and everything worked fine. I just don't get it why i get the country id error now.

Try this one: ftp://ftp.xda-developers.com/BlueAngel/BlueAngel_Roms/BA_1.40_radio_1.20_untested_extrom/

TyTN II - installing cabs

Help
Ok thanks to this helpful site I have flashed my ROM with Dutty's v3 beta and I must say its fantastic. But...
...I need to add Remote Desktop and I have downloaded it from Dutty's cabs but I haven't a clue on how to install it!
Can any one help?
Thanks.

How to run a cab (?)
Well, if it is that what you are asking, just copy the .cab file into a folder at your card or phone and execute it. Cab is the equivalent to .exe files on PC's.
NOTE: During the installation, you have to specify where to install, device or card. For this specific application, (remote desktop) you should install it at your device as some issues have been reported when installed on an extension card.

Seems so daft now - thanks for that - got confused as WinRaR just opened it and showed the contents on the PC.
Anyways, working now. Thanks again.

Need Help

Hi. I have tried to install TomTom into my Kaiser but it says that I need to update my ROM......I have:
ROM version: Touch v6.1 WWE
ROM date: 02/16/08
If anyone can help I would really appreciate it!!!

HERE
Here you need this one.
http://rapidshare.com/files/91182629/ttn_6_032_8351.cab

Thanks
Thanks for replying and for helping me out. Now the problem is after i download it and after I unzip the files, What do I do because I got all these files and dont know what to do next.......

rob06 said:
Thanks for replying and for helping me out. Now the problem is after i download it and after I unzip the files, What do I do because I got all these files and dont know what to do next.......
Click to expand...
Click to collapse
well connect your device to your pc. Move the .cab file (it will be a blue cabinet if you are running vista) drag it into a file on your phone by opening windowns mobile device center>file management>browse contents of your device>then just put the .cab file where you want it.
once .cab is on your phone go to start and look for "file explorer". Once you find file explorer on your phone go to where you put the .cab file. When you find the cab file double click it and it will install.

Thanks
Ok got it......thank you so much!

rob06 said:
Ok got it......thank you so much!
Click to expand...
Click to collapse
no problem. glad to have you here.

Help Instaling Kaiser Please!!!

HELP INSTALING KAISER PLEASE!!!
Im a newbie and Ive downladed the Kaiser tweak ( the most basic one I believe) and when I transfer the file to my phone I dont believe it zipps all the way open?? Or it says that its not a supported file??
I really like what you guys are doing and any advic would be appreciated!!
Jerry

try running it from your pc if it's an exe

UNzip it on your PC to a folder called kaisertweaks then move the whole folder to your PDA

Kaiser Download is still not working
When I try to open the Kaiser file when it is a exe. file an error message apperas that says " not a valid WIn32 file"......when I Unzip it on my tilt it doenst unzip all the way...It goes like 83% for the file and like 10% for the html file...Althought I do not have a memory card its prety new and it has the space to support the file....
Could i Be downloading a old link??