On my HTC TyTn when I use my motorola ht820 they work great for music and phone calles but when I receive a call while using them my tytn wont ring out the loudspeaker of the phone it just rings through the motorola head set, how can I change this so the phone knows to route the ringtone to the phone and the headset? I have all through the reg to find something.
I use same headset - but I have trouble - after a call - music don't play again!
do u have same problem? or managed to solve it?
and what patch for BT stack do you use?
Maybe My rom is newer but I have no problems stright out the box it worked fine I only had my tytn for a week but I do no that the wizzard suffers from that problem try making a call and when you hang up just wait a while to see if the music will automatic start, I know my moms wizzard was doing that but I just watied to see if it would go back to the music and it did, I think that it gits confused if you press the play button, but the tytn dosent do that at all it just back to music after a sec
Related
Some body help me!!
My BA XDA IIs now can not hear any calling voice during I make the call!!! (Ring tone, anwser voive from the other telephone!!)
Ring => Can hear Ring tone when have incom call
Music => Can play music
Sound from application => Can play the sound!!
Sim card => Checked and Working smooth in the other phone
Make a call => working and show image as the phone connected but:
1. No ringtone during waiting pick up!!! (the other phone ring)
2. No voice when talking!!! (from the orther fone we also can not hear any things!)
Radio version 1.15
Cause: I open the PPC to fix the connector and..... had problem.
Some body tell me what's thing I should check
Thanks for your help!!!
i have the same problem
hi there i have the exact same problem but i find that when i plug my phone in to charge it works fine. I tried just plugging the adapter in with no charger but it didn't work. Hope this can help someone figure it out
I have an MDA Vario III branded phone using the HTC ROM 1.56.405.5 and a sony MEX-BT2500 (Bluetooth enabled stereo with A2DP).
http://www.audio66.com/product.asp?id=5616&cat=1&man=6&main=1&userid=&firstsel=cat&variation=
The A2DP works well (except it's a pain to enable/disable it using the WM6 interface!) and I can make outgoing calls fine with the phone paired with the Sony but when incoming calls come in, the ringer is routed to the stereo but when I answer it the voice doesn't and I have to hang up and call the person back.
I paired my work Nokia with the stereo and both incoming and outgoing calls work fine.
I tried the original T-Mobile ROM and still had the same trouble.
I'm assuming (with no knowledge of what I am talking about) that the bluetooth stack on WM6 has some issue with routing incoming calls but I can't find any reference to this problem anywhere else and it would seem to be the kind of problem I'd expect millions of users to have a problem with and that there would be a lot of posts.
Does anyone else use bluetooth handsfree? Does it work properly? Does anyone use a bluetooth stereo and A2DP? Does it work properly? Does anyone know if there's a fix?
Thanks for the info in advance...
mine works Ok with my BT2500 although sometimes it needs to be re-paired
Info
Can you tell me what ROM version you have and what model your phone is, radio version, installed programs etc? so I can try changing things.
If you hae a2dp music being streamed and a call comes in does it still work?
ROM is UK Vodafone out-of-the box original (v1615 = Tytn II) 1.56.161.4
Radio is 1.27.12.11
Have Seuth255's A2DPFix from the Hermes forums (prevents skipping)
MS Voice Command V1.6 (i have a SE BT headset too)
Remainder are general apps, gps etc.
haven't tried a call when music is streaming. will do later and let you know
Works for me too, with the original HTC ROM.
Everything is working fine here. I have a MEX-BT2507X, and there's some random 0.2sec cut every 15mins of playtime, but that's not a problem.
Have you used the quickfix from HTC?
jym04 said:
Everything is working fine here. I have a MEX-BT2507X, and there's some random 0.2sec cut every 15mins of playtime, but that's not a problem.
Have you used the quickfix from HTC?
Click to expand...
Click to collapse
I didn't know about the HTC Quickfix. I've just downloaded it and installed but haven't got round to leaving the PC to test it yet. I'll give it a go later and post back.
Fingers crossed...
Audio not working
My audio is not playing through the car speakers with the BT-2500. I had it professionally installed, but was running late to class so I didnĀ“t fully test it until I got home a few hours ago.
I can control the tracks and play/pause, accept/end calls, and the dash microphone works, but my audio is not being pushed and played for some some reason (does work for CD, and Radio). I tried repairing numerous times, resets, and different programs, but no luck... but audio push worked great on a handsfree kit.
any ideas are greatly appreciate... I will take this back to the shop tomorrow, but I would like to know if anybody else experienced this and how they fixed it.
Thanks!! =)
btw, I use stock AT&T rom
eayuwna said:
I didn't know about the HTC Quickfix. I've just downloaded it and installed but haven't got round to leaving the PC to test it yet. I'll give it a go later and post back.
Fingers crossed...
Click to expand...
Click to collapse
...much, much later...
I finally got round to trying it out and even with the quickfix I still have the same problem. My mate also has a Kaiser so I borrowed that (UK O2 ROM I think) and that doesn't work either.
Most odd. maybe I'll ring Sony.
I have the same problem with my Jabra 620s. Maybe somethings wrong with the headset itself?
Can you let me know ur ROM, radio versions so I can see if we have anything the same.
I get the "Device Not Ready" popup in Media Player when a call comes in and switches over to my BT headset. It is frustrating to constantly have to clear the popup and try to yet again seek to where the hell I was on a podcast when the call came in! Is there a fix for this or is it just a "feature" of WMP and/or WinMo 6.1? I am hoping someone has a magic reg setting to make WMP behave on audio transfers to and from BT.
I have MSVC working fine via my Plantronics Voyager 510 and just want my music or podcast to pause when a call comes in then switch to my BT for the call duration then resume playing via speaker after the call is done.. is this asking too much?
This happens with every ROM I've flashed.. (although I only have flashed Dutty's last 4 releases). So, I am thinking others have it happen and live with it or I am just not tweaking my tilt properly. And, yes, I do a hard reset after every flash.. and everything else works fine.
I've searched but can't find if there is a solution to this. Any advice is greatly appreciated.
Thanks..
Hmm.. since no takers.. can u tell me if it happens to u?
With no replies on my post.. can anyone just confirm that this happens to them as well? I would think at least some of the xda peeps would have the phone playing a tune or podcast between calls. Does your phone switch audio without the "Device is not ready" error?
Just trying to see if it's only me...
Thanks.
I listen to MP3s (not WMP but Pocket Player or S2P) all the time while my phone is connected to my car's bluetooth handsfree system. I have never once observed a "device not ready" error pop-up when a phone call arrives. The music pauses and the handsfree takes over and starts ringing.
Might want to look at this thread: http://forum.xda-developers.com/showthread.php?p=2083364 as it seems that some people are seeing the same problem as you.
Rumball,
Thanks for your post. I guess it might be my bluetooth giving me the problem then. I've been needing a reason to buy a new z9.. so hopefully it will behave better since it's BT 2.0.
Thanks again for letting me know it works the way I imagined it should!
Just as the title states... ie: I get an sms or email alert and the vibe just keeps on going until I goto volume silence then I can reactivate the volume.
I use ring and vibrate together for all alerts.
Anyone else have feed back with this or a similar problem?
*edit*
So I have done some testing and would like if someone else who uses a bluetooth headset to listen to music could try using BT a few times turning it off and on (when on use the htc media player) and see if after receiving a text message or email if your audio fires properly and your vibe stops. I have not used the BT all day today and the vibe/ring has performed perfectly. Basically after using BT a soft reset is in order.
What apps are you using?
Are you using any of the phone profile software such as SPB Phone Suite, Phone Weaver, Phone Alarm or the like? I had this issue occur when using Phone Suite and it was resolved when i de-installed the software.
I had same problem. I got mail and the vibration didn't stop. I don't use any profile manager. But I had same problem with Cruise with Wm6.1.
No profile managers at all. I have had this happen once before with an asus p527.
I have since done a hard reset on my diamond, we'll see how it goes. I did the reset because initially I've done alot of playing around testing apps and hacks to see what works best, I have re installed the apps I know work and have done. very little tweaking... Fingers crossed.
@thebiker
Do you use Bluetooth Audio for music or voice calls?
I think I have narrowed the problem down to this for myself.
I use my jabra 320 to listen to music on my way to work, after disconnecting the problems begin, vibrate doesn't want to stop and the ring doesn't want to work. A quick soft reset and everything appears to be good until I use my BT Headset again. Are you able to see a similar trend as I am? As I mentioned already I had this issue with my Asus so maybe there is a problem in general with Microsoft's BT Stack when using it with a2dp and in general derails audio on the system. My thinking is the audio is actually what is stopping on me so the Vib doesn't have the audio to tell it when to stop.
Thoughts on this matter anyone?
Bump... added some info to the first post and modified topic slightly, to more acurately describe my newer findings.
If someone using BT can try what is in the first post... thank you.
I have the Jabra BT620s headset and have the same problem. I can listen music and when a call comes in I can answer it and people hear me.
When I disconnect the headset i don't get any sound. Need to do a soft reset to get sound back on my phone. So no rings or sounds untill a soft reset is performed.
Stupid bluetooth... Anyone with a fix?
I can't find anyway other then soft reset. If you look at the volume after disconnecting a headset it sets the volume to 0.
I also have this issue on a tilt running winmo 6.1 and Microsoft BT Stack. So I believe it is a MS Operating/BT Stack issue.
What rom are u guys using? i'll try to have a look and experiment with the 1.37 rom
Shipped ROM: 1.34.831.1 WWE
Date: 5/25/08
WM6.1 CE OS 5.2.19588 (Build 19588.1.1.4)
Radio: 0.93.25.NS16
Protocol version: 52.24.25.08H
any news on this ?
I encounter this problem when receiving voice calls. No sound and neverending vibrate. Also, on several occasions the sound disappeared during the conversation. Only a soft reset could bring it back. The volume showed just good values, so it wasn't a spontanious mute.
I don't use a BT headset, never did. In fact BT isn't enabled at all. I did change the ringtype to ring and vibrate, perhaps thats the trigger. I changed back to default ringtone setting, lets see what happens.
I hope this will be solved quickly, it makes my Diamond a bit unusable as a phone...
rondol1 said:
I encounter this problem when receiving voice calls. No sound and neverending vibrate. Also, on several occasions the sound disappeared during the conversation. Only a soft reset could bring it back. The volume showed just good values, so it wasn't a spontanious mute.
I don't use a BT headset, never did. In fact BT isn't enabled at all. I did change the ringtype to ring and vibrate, perhaps thats the trigger. I changed back to default ringtone setting, lets see what happens.
I hope this will be solved quickly, it makes my Diamond a bit unusable as a phone...
Click to expand...
Click to collapse
Interesting results... I can so far state that so long as I reset after using BT Headset I don't experience this problem. There maybe more pointing to a bad audio driver in general that BT causes to crash immediately and potentially regular use like you have may also cause it to go loopy, might be a specific app and the way it interfaces with the audio api.
citats said:
Interesting results... I can so far state that so long as I reset after using BT Headset I don't experience this problem. There maybe more pointing to a bad audio driver in general that BT causes to crash immediately and potentially regular use like you have may also cause it to go loopy, might be a specific app and the way it interfaces with the audio api.
Click to expand...
Click to collapse
The only app I installed afterward is TomTom Nav6. But I remember the problem happend before installing this app as well. I made several hard resets but no change. Perhaps I try once more, don't change any setting and keep it clean for some days.
The same problem here with ROM ITA.
rondol1 said:
The only app I installed afterward is TomTom Nav6. But I remember the problem happend before installing this app as well. I made several hard resets but no change. Perhaps I try once more, don't change any setting and keep it clean for some days.
Click to expand...
Click to collapse
let us now what the result is..... maybe it is tomtom ?
xivius said:
let us now what the result is..... maybe it is tomtom ?
Click to expand...
Click to collapse
Nop - got the problem before installing any additional software.
I confirm that I also have the problem after using my BT stereo headset.
SR solves the problem ... until I use my BT headset again
UPDATE: UNRESOLVED on 1.37 stock rom, but i can hear people's voices on the line, but doesnt wake up on sms and no alert, and no call ring tone after using A2DP for 5 mins and switching off Bluetooth, using HTC Player in Touch FLo 3D
Baronic said:
UPDATE: UNRESOLVED on 1.37 stock rom, but i can hear people's voices on the line, but doesnt wake up on sms and no alert, and no call ring tone after using A2DP for 5 mins and switching off Bluetooth, using HTC Player in Touch FLo 3D
Click to expand...
Click to collapse
So you have no ringtone anymore ? And after a soft reset ?
no ringtone no sms tone, soft reset, press volume key, resolves it.
Hi there. I was wondering if anyone could help me with an issue I am having after my 1.5 update (non-rooted). After my update I played around with it for a bit and love it but I went to play with my bluetooth and I can't listen to music through the headset like it said it was suppose to do. I get a ringing noise when someone calls but no music thru it. Did I do something wrong with the manual update or something? If someone could help me I would truly appreciate it.
Also I was curious if its possible if I can root my phone after the update or is it not an option anymore? I been thinking bout it now and is loving the cool themes you can get.
Thank you so much for your time
i to have this problem from time to time
i manage to fix the problem temporary by going to the phone's settings > Wireless controls > Bluetooth settings > klick and hold the bluetooth device till a popup comes > Options > then toggle media off and on
then my headset works out fine
ps: i just repaired my headset as a test, witch i dint do after the update and it seems to work after turning off bluetooth and the device
ill give u an update if it works after a couple of times
Thanks for responding. I have tried for 2 days now to try to get it to work and I haven't gotten it to work yet. I kept my music running while trying to disconnect and reconnect the headset (motorola H690) and nothing and then earlier I got a phone call while I was listening to my music off my phone and I got a phone call and I answered it via bluetooth and when I got off the phone I could hear the music for a couple seconds and it shut off and started playing on the phone speaker. I don't know what the deal is.
i to still have that problem
i can start and stop the media from my bluetooth device but it will play on my phone
still when i toggle media off and on in the bluetooth device options it fixes it sometimes for 3 connects sometimes till the next session
what happens if u toggle media off and on with ure G1?
Yeah it still hasn't worked for me and I've done the same things you havei don't know what the deal is.
im not sure if this is the same problem but my g1 is rooted & i have it paired with my bluetooth in my car & when the phone rings... it rings through the car speakers but when i answer the call all sound comes thru the phone... same when i make a calll.. instead of it working thru the car speakers & mic it only wrks thru the g1 itself..
Exactly the same issue as i3lazen
My phone is totally standard running 1.5, just about to go and sell the phone and go back to my HTC Kaiser as it works with no issue.
I can stream music to my BT car stereo no problem but if I can't send and recieve calls then I'm stuffed.
If anyone has any advice, it would be appreciated as I'd love to keep my G1
Hey guys,
try the fix here: http://forum.xda-developers.com/showpost.php?p=4177831&postcount=329
Thanks for the link but is that not just for improving sound quality and not a BT fix?
i3lazen said:
im not sure if this is the same problem but my g1 is rooted & i have it paired with my bluetooth in my car & when the phone rings... it rings through the car speakers but when i answer the call all sound comes thru the phone... same when i make a calll.. instead of it working thru the car speakers & mic it only wrks thru the g1 itself..
Click to expand...
Click to collapse
I had this issue with my rooted phone, and then I updated the radio to 2.22.19.26I and this fixed it. Not sure if this is related to the non root phones but it may be related to it if the radio wasn't updated in the upgrade to 1.5
ashleyglassel said:
I updated the radio to 2.22.19.26I and this fixed it.
Click to expand...
Click to collapse
I've got that radio on my non rooted phone but still have the BT issue