Related
hi
it is possible to write ROM from SD Card ??
Yes it is, if you have the backup rom on SD card. Enter bootloader with sd card inside the device and it will ask you whether or not to flash the rom.
i don't have backup on SD Card
why do you need to use SD flashing? this was primary designed for emergency purposes, it makes physical rewritement of all parts of ROM (could be compared with complete format of your pc, not just quick format)a and new initialization
of course, you must have SD card to take backup from - this is easy to create with various tty clients, the most used for it is mtty (putty and others could be also used)
I need to flash my harmer from sd can you write how do it??
I dont have backup on sd can make for me thiece backup and send me on mail or something like thiece ?? My harmer stop on splash screen i was flashing on cid locked maschine :|
- I tought that a SD backup was needed, and yes it is. But u can use your own phone and your own SD to do it.
2- Get a clean SD card (in qtek 9100 / Htc Wizard case is MiniSD) with 128MB (some people say 64MB, but I personally used a 128MB, maybe a 64MB is enough)
3- Kill (task manager) wescomm.exe (this is related with activesync installed on your PC). Insert the blank SD card on the phone.
4- Get your phone in bootloader mode. Like this : Phone powered off, press Camera button + Power On, will enter in bootloader mode (RGB screen).
5- Now connect your USB cable to your phone. And start MTTY_updateROM.exe (http://wiki.xda-developers.com/uploads/romupdate.rar). After open, on Port selection, choose \\.\WCEUSBSH001 and press OK. A window will open with a blank sheet.
6- Type "r2sd all" and hit enter... wait to the end (at end shows "cmd>"). On your phone screen u can follow backup progress... small bar will appear down the RGB screen.
7- Power off the phone (or remove battery), enter bootloader mode (camera button + power on) and this time RGB won´t appear right away. Will ask if u want to "download SD image", press voice dial button to agree, and writting will begin. Wait to the end. Power off and power on normally. Now your phone should be working ok. Not even needed to reflash the phone after this.
Thanks to all and hope this helps more people with this problem""
In Wizard forum Ozzy give me thiece solution
I screw my Wizard....
Hi,
Im really new to all this, and... in a few words, I screw the registry of my Wizard T-Mobile, and now it doesn't boot, I can enter to the rgb mode, and, I understand that flashing from SD can help me, but, the steps described above are for restore a backup or make a backup ? Im so confused
Thanks in advance.
UPDATED: It worked great! but... just one thing, The SD is not reconigzed by my phone, is any way to format it from the Multi-Port/USB TTY ?
Regards.
Raptorgda said:
6- Type "r2sd all" and hit enter... wait to the end (at end shows "cmd>"). On your phone screen u can follow backup progress... small bar will appear down the RGB screen.
7- Power off the phone (or remove battery), enter bootloader mode (camera button + power on) and this time RGB won´t appear right away. Will ask if u want to "download SD image", press voice dial button to agree, and writting will begin. Wait to the end. Power off and power on normally. Now your phone should be working ok. Not even needed to reflash the phone after this.
Click to expand...
Click to collapse
I did all that you said (backed up to SD card, then restored to SD card successfully), but the problem still remains (obviously).
Is there anywhere I can simply download a 'clean' image file specially formatted for SD cards?
I looked and can not find things mentioning via sd card only via PC. If I am wrong, I am sorry but I didn't find it. Could you attach a link to where it mentions it? What do I name the .nbh?
Yes you can, the image needs to be called BLACIMG.NBH
and you need hspl on youre phone and the mem formatted to fat 32:-o
miniterror said:
and you need hspl on youre phone and the mem formatted to fat 32:-o
Click to expand...
Click to collapse
I just received it today from ebay, does this seem to be already for me to flash it?
It has 6.1 installed
Bootloader screen says
BLAC100 32M
SPL-1.56.OliNex
MicroP-BlackStone (LED) v6
Bootloader says "No Image File"
I have the BLACIMG.nbh file on my 1GB card and it's not loading it. I have done it the same way on my HTC Jade multiple times with the same sd card.
I TRIED WITH ANOTHER ROM AND IT WORKED JUST FINE. I don't know what was wrong with the other one but Thanks for everyone's help.
I'm afraid you're not following the right procedure. This should do the job.
1. Copy BLACIMG.NBH into the root dir of your Storage Card.
2. Be sure to have at least 30% of charge.
3. Turn off your device . Fully power the device off by long press of power key.
4. Go to bootloader mode. Push and hold Vol Down + press Power button.
5. As soon as presented the message, push Power button to start flashing or Volume Down button to cancel.
6. The whole procedure will take about 3 minutes. After you finish and see the relative message, soft reset your device, you are ready.
Make sure you formatted your sd-card.
To enter Bootloader, starting from powered off phone, hold down volumebutton and briefly press powerbutton.
You can also always use the "search" funtion on the forum startpage. Topbar (brown) on the right side.
It's recommendable to hardreset your device after flashing.
Good luck.
Bry009 said:
I'm afraid you're not following the right procedure. This should do the job.
1. Copy BLACIMG.NBH into the root dir of your Storage Card.
2. Be sure to have at least 30% of charge.
3. Turn off your device . Fully power the device off by long press of power key.
4. Go to bootloader mode. Push and hold Vol Down + press Power button.
5. As soon as presented the message, push Power button to start flashing or Volume Down button to cancel.
6. The whole procedure will take about 3 minutes. After you finish and see the relative message, soft reset your device, you are ready.
Make sure you formatted your sd-card.
To enter Bootloader, starting from powered off phone, hold down volumebutton and briefly press powerbutton.
You can also always use the "search" funtion on the forum startpage. Topbar (brown) on the right side.
It's recommendable to hardreset your device after flashing.
Good luck.
Click to expand...
Click to collapse
I got it to work just fine I used another ROM and it worked just fine. I have also had success with my JADE with no problem. I edited the post before stating what I did to get it to load successfully. Thank You for the assistance though, that is a easy step by step tutorial of how to perform the flash from sd.
I got a kingston card (8gb) it works perfect but for some reason I cant flash from there... I use my backup 2gb scandisk
jimi_c said:
I got a kingston card (8gb) it works perfect but for some reason I cant flash from there... I use my backup 2gb scandisk
Click to expand...
Click to collapse
you're right, this trick will not work with SD-HC cards, only "normal" SD-Cards will do the job
SD card flashing
kel187 said:
you're right, this trick will not work with SD-HC cards, only "normal" SD-Cards will do the job
Click to expand...
Click to collapse
I have a 16 gb MicroSd-HC (Sandisk) and regularly flash blacimg.nbh files from this card. Never had any problems. My phone has hardspl and is secuurity unlocked courtesy Olipro
This has been covered many times before in wiki and stickies. Thread closed
I've installed Blackberry application on my X1...
After finished and reboot, my screen is blank after son-er logo appears...
I've tried to reboot again but nothing happen...
I've deleted the application's files from my SD card but it's not help at all...
what should I do?
tLuN said:
I've installed Blackberry application on my X1...
After finished and reboot, my screen is blank after son-er logo appears...
I've tried to reboot again but nothing happen...
I've deleted the application's files from my SD card but it's not help at all...
what should I do?
Click to expand...
Click to collapse
In worst case scenario>Shut down the phone>hold the right and left silver buttons and one small press on the home button on the top...
It is hard reset> IT WILL WIPE EVERYTHING ON YOUR PHONE>CONTACTS, SMS, PHOTOS (IF THEY ARE ON THE PHONE MEM)
iT has nothing to with the things on your mem card> So don't worry!
I received the color nook a couple of days ago, got the home wifi connected, registered to B&N, updated to 1.1, rooted it easily with autonooter and added some apps. All good. But I decided I needed to delete some apps, and couldnt do so without a file management system of sorts. So, I followed the directions on this youtube
(I also used this guy's work for the root) and all went according to plan. Until I rebooted and tried to register. I am stuck on the reregister, it spins and spins and goes nowhere. My computer wont recognise it as a nook, let alone a drive so I cant even sideload the update. My wifi is fine. I have rebooted with the 8 times method many many times. Nada.
I did see elsewhere that when unrooting you should unroot first, and then deregister and wipe clean. This is the opposite of what the youtube said to do. I see on the postings that several others have had the same problem but huskermania has not responded. hellpppp
So it's not re-registering? I've never experienced that. You for sure haven't bricked it, as it got that far.
Try this:
1) Download the 128mb bootable CWR. (http://legacyschool.us.to/nookdev/clockwork/cwm_128mb.tar.gz)
(Credit: thecubed)
2) Burn it to a 2GB+ card using Win32DiskImager.
(Disk imager download: http://launchpad.net/win32-image-writer/0.1/0.1/+download/win32diskimager-RELEASE-0.1-r15-win32.zip )
3) Download the stock 1.1.0 firmware here: http://www.barnesandnoble.com/u/nookcolor-support-software-update/379002520/?cds2Pid=35758#2
4) Drag the .zip you downloaded from B&N onto the SD card.
5) Turn off the Nook
6) Insert the SD Card
7) Turn on the Nook. It should boot into recovery automatically.
8) Install from .zip
9) Select the stock 1.1.0 firmware.
After it is done installing, remove the SD from the Nook and reboot. You should now be in stock 1.1.0. (And able to register.)
Oh gosh, after five hours of frustration, this fixed it!
the nook devs came to my rescue, I cant post links yet as I am a newbie!
Thankyou thankyou thankyou!
huskermania, your rooting the nook youtube was brilliant, but I see lots of others had this problem using the unroot youtube. I will post the fixit on that too, I am not allowed to post it here until I am an oldie.
What did they tell you to do? How did you fix it?
Go here: http://forum.xda-developers.com/showthread.php?t=945838
Download the image
Install Winimage
Run winimage as admin
Go to Disk->Restore virtual disk image
Select your micro SD card reader
Select the downloaded image
wait
Turn off nook color(hold pwr button, it may take 20+ seconds)
Insert newly imaged micro SD card
Turn nook on
Go to mounts and storage
Format system/data/boot (it may lockup after formating the boot partition it's Ok just hard reset it)
Now go to flash zip from SD card
Select from SD card
It should flash stock 1.1.0 onto your nook
Once done remove micro SD card and reboot.
That should get you to an 'out of the box' state.
Good luck. Hope this works out for ya.
woot1524 said:
Go here: http://forum.xda-developers.com/showthread.php?t=945838
Download the image
Install Winimage
Run winimage as admin
Go to Disk->Restore virtual disk image
Select your micro SD card reader
Select the downloaded image
wait
Turn off nook color(hold pwr button, it may take 20+ seconds)
Insert newly imaged micro SD card
Turn nook on
Go to mounts and storage
Format system/data/boot (it may lockup after formating the boot partition it's Ok just hard reset it)
Now go to flash zip from SD card
Select from SD card
It should flash stock 1.1.0 onto your nook
Once done remove micro SD card and reboot.
That should get you to an 'out of the box' state.
Good luck. Hope this works out for ya.
Click to expand...
Click to collapse
Didn't even see that. =P Avoids having to go to 1.0.1 and then updating to 1.1.0
I have been a little stressed by all this, I spent three hours last night trying to fix it, and then another two this morning. The bottom line was doing this:
1. With the NOOKcolor powered off hold down the n button (home) and Power Button until the NOOKcolor powers on.
2. You will be prompted with a Factory Reset dialog.
Press POWER key to Exit
Press HOME key to continue
3. Press n button (home).
4. You will be prompted to confirm.
Press POWER key to Exit
Press HOME key to continue
5. Press n button (home).
6. A Clearing Data dialog will show. NOOKcolor will reboot automatically once complete.
I was thinking that I could use your method woot, and was about to do this when it all came good using the method. I love the root, and will do it again. I have no idea what went wrong for me, and a few others by the looks.
Thankyou once again both of you, and maybe my thread might help others. I had done so many google searches, 8 turn offs, etc etc and nothing would do it for me.
How do you get it to boot from the SD card when the power button isn't doing it? I can push on the power button all day long and nothing at all is happening.
Edit: Never mind, it suddenly decided that it wanted to work. I think I might have a faulty power button.
I was flashing 2.36 into my phone with odin, and unfortunately if failed. Therefore, I unplugged it and took out my battery, afterwards the phone won't start in any combination of keys!!!!Just a balck screen even when charging, WHAT should I do to fix it????
Someone help me pls??
Long press powerbutton
1 Try to press the power buton for a longer time,
2 Try to get back in download mode (Home button, Volume down together and press Powerbutton.
I did a lot of things with my 9000 and sometimes i was also afraid.... but i still use it.
You could try a jig from dealextreme or ebay if buttons don't work. A jig is considered fool proof, if that doesn't work your hardware would be defect and you can't ruin your hardware through ODIN.
maurice1210 said:
Just a balck screen even when charging, WHAT should I do to fix it????
Click to expand...
Click to collapse
look in My Android Solutions
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power
button for a minute, than powerup without SIM and Ext.SD Card....
Tips before Flashing:-
Backup all your important files, contacts, SMS, game data, images etc to PC or
Ext SD card. or make Nanadroid Backup If you have CWM
Backup your EFS Folder to PC or Ext SD card
Enable USB Debugging on Phone. Touch menu>Settings>Applications>Development>
Charge your battery to more than 50% before you attempt any sort of flashing.
Disable Samsung KIES when using Odin. Kill Kies.exe, KiesTrayAgent.exe, &
KiesPDLR.exe using Task Manager on PC
Use only ROM and solution for your model and Wipe x3
Take your battery out and hold on power key for 1 minute --
Then return the battery and press power + volume up + home key for 30 second ....
After that choose reboot ...
I hope it useful ^_^
Sent from my GT-I9001 using xda app-developers app