Database Develop

Not a happy bunny...

Well, it seems that my BA finally broke (WM5 anyway). It happened when i was flashing back from a test rom to ivans latest version, i flashed, booted up and got to the wight screen, and stayed there... for 30 minutes. undettered i then tried every WM5 rom i could lay my hands on, but to no avail. in final desperation i downgraded to wm2003se and lo and behold it worked!
Anyone got any idea how to get wm5 working again on my ba?

just reflash back to WM5
thi is a rare bug, which occures, and the fix is downgrade to 2003 and then upgrade to WM5

done that, twice

have u tried to format your extended rom ?
there is topic out there, but show how to do it.
u could give that a try.

reflash everything including radio and ext rom, use radio 1.13, after flashing WM2003 try to flash WM5, please post the result. If this does not work i think it is a bootloader issue, if you can get the same version of boot loader and flash it maybe all will work.I am too scared to mess with bootloader yet.

http://forum.xda-developers.com/viewtopic.php?t=46867

Does anyone have command reference for BA bootloader trough mtty

[curse]
**** **** **** **** **** **** ****
[/curse]
right, i ran the mtty thingy, and reformatted the flash, i then went back to 2003se and storage and extrom were working , but then when i tried to go back to wm5 i kept getting a model id error even though i used xda3nbftool.exe to set the same one as in deveicedata.txt but to no avail, when i gave up to go back to wm2003se i found i couldnt exit bootloader! so i tried connecting again via mtty, it all went fine, ran the commands again etc but still stuck in bootloader. out of desperation i took out the battery, but now to my horror the phone wont even turn back one (yes, i've put the battery back in ). has anyone got a clue how to fix this?
Many thanks in advance....
edit - I just tried a bit of percussive maintanace on it and lo and behold... it began to boot
The only problem now is that the boot screen is f*cked up and i get a model id error whenever i try to upgrade roms (even the official orange shipped extract with no modifications wont run )

http://forum.xda-developers.com/viewtopic.php?t=49611&highlight=model+id+error

@Midget_1990
edit - I just tried a bit of percussive maintanace on it and lo and behold... it began to boot
Click to expand...
Click to collapse
"Percussive Maintenance" rarely fails. Nice term though - I'm sure I'll quote it.
Do post a link to the mtty command reference when you get it.
Cheers

- it just sounds better the 'i threw it at a wall'

no Gsm service IN wm5

i have weired problem,after upgrading to wm5 on my blueangel everything was ok,but i cant remember if i changed something or it happened by it self,the GSm service shows NO SERVICE,,,and the synchronization with the PC IS NOT WORKING ALSO,,,and whenever i try to hard reset it with the record and camera buttons ,when i press on the mail button nothing happens,,,as if i didnt press any thing......i tried to go back to 2003se,it worked fine,i used both radio versions 1.15 and 1.13 and the same on the wm5
i tried to reinstall the wm5 it reinstalled with the same problem and i noticed that my configurations r also the same!! and even the wall paper ,it seems that the settings sticks to the memory in some way ,,how can i delete it?how can i get rid of that?and install a new fresh copy of WM5 on it?
my device info now is 5.04.09
radio:1.13
and the surprise is no extRom version is Blank!
plz i need help with that....

what device do you have?

it's IMATE PDA2K

Have you tried to make soft reset? Is radio version showing up on reset?

The same situation. Everything was fine untill i upgraded to WM5 and then WM6. It seems that all files in ROM were saved cause on device start up all old applications are starting, such us XPshut and etc, but system gives can't find the file. the same applies to phoneservice.exe. the only thing which helps is to roll back to original 1.40 from imate.com. any solution?

if all apps from wm5 are there during startup, you didn't perform the reset + no/yes/yes + mail button routine, did you? the same thing when upgrading to wm5 from 2003se.

Hard reset not happening!

I don't seem to be able to hard reset my SPV M2000!!!
I press:
-Power+Reset
-Camera and Record to get the Boot Options
-Select NO, Yes, Yes
All of this works fine, but I can't go on from there - no button press will get it to finish the hard reset (and, YES! I DID try the 'Mail' button, nothing happens!)
Any I deas?
I've upgraded to WM6 (after first downgrading to WM2003 from WM5 - same problem occured when I tried this, too!) an I have a load of the programs I installed in WM5 trying to load at startup! I also want to get rid of the Extended ROM.
Any help you guys could give? I'd be eternally grateful!
Bird

Workaround
Sort of found a workaround(ish):
As I hadn't already changed the EXTROM, then all I had to do was to install the latest official ROM from the Orange UK site. That wiped the old crap I had on my BA, then resized the EXTROM and installed WM6.
Would still love to know if anyone knows/finds a proper fix! Just in case I want to change the ROM at a later date.
Bird

Full Solution
Not tried this - don't need to at the moment -
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_STUCK_AT_STARTUP
But it looks like the solution to the problem - found it by ... reading the Wiki !DOH!
Bird

Stuck in BA WM6 Upgrading

I'm Stuck in BA WM6 Upgrading.
I was at the HTC_Blueangel_WM6_Wizzard Upgrade 4
After execute the installer file I performed a Hard Reset
Colored stripes (the bootscreen) will appear on the screen but I can't ge no debugger screen at all: the BA remain in Bootscreen with R 1.11.0 at the right bottom of the screen.The battery was full. I've tried the mtty procedure as well...no way out. Any clue ????

Have you follow all this steps here?
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade1

Yes I did and now I'm Stuck at
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4

And what device do you have in fact? Qtek 9090? Other??
Mine is a Qtek 9090 and didn't have any trouble...

Same problem here, wm6 was already running; downgraded to 2003 SE to repartition the extrom, wanted to flash to wm6 again; now my xda3 is stucked after flashing, only r 1.10.0 is shown, no chance to carry on...???

I've got imate pda2k ct2cwj...and Heinzibua I'm stuck on R 1.11.00 do you have an Imate as well ??? cause I guess the official XDA procedure doesn't work for this kind of model (mine was an Italian W2003).
I'm very upset about this...

@ conosciani.m
wm6 worked well on my xda3 , problem was only after repartitioning the extrom.

I'm going to think I did somenthing wrong during the extrom steps..so i've returned back to wm2003 and I'm going to try the upgrade again

please tell me, if you find the solution...

running again
i repartitioned storage in 2003SE set to 20000 kb.
flashed to WM6, no problem now, storage is 41,25 MB, but running !!!

I did it too, I had to reinstalled w2003 and dit the Upgrading BA WM6 wizard again.....
after UNHIDE the rom, this time (and not in the previous upgrading), I did it the rom format using MTTY after that I ran the upgrade procedure and I got the WM6 running.
Happy for both of us to reach the goal......

do you have 60 MB storage now ?
can you give me more infos about MTTY ?
thx
tried to set storage to 60mb again, stuck again, also if i do just the same procedure as yesterday it is stuck; start to hate this device.
please tell me, what you did exactly to make it run. tried mtty also, but don´t know, what to do...

try this...
1. downgrade to 2003
2. copy the utils to the phone(extrom utils and repart_doc.exe)
3. install extrom utils...
---a. tap unhide... ok.
---b. tap unlock... ok. may throw an error but still ok...
---c. reset...
4. run Repart_DOC
---a. Set it to 128 byte
---b. Go/Start/Format (it should succeed)
5. reset to bootloader
---(press and hold record + power button then stick reset)
6. flash WM6 ROM
7. cold boot (press and hold power button then stick reset)
8. (optional) if stuck in the "tri-color"(white isnt a color ) screen...
---Hard Reset. Using No/Yes/Yes option.
reading further about the Repart_Doc topics...
128byte is the smallest you can format/resize the extrom
to maximize the storage in WM6.

Thx, that´s exactly what i did many times without success...
but now it works, after upgrading radio rom there also was no problem with upgrading to WM6; 60 MB rom; i only want to upgrade to radio rom 1.15, then i´m happy.
thx everybody for your help

Phone keeps hard resetting

Hi,
I have just tryed to flash both newest laurentius rom and newes kwbr rom
Flashing goes ok, but when all files are loaded, phone just resets and starts all over again.
im on spl-1.56 Olinex
Help needed

Whenever you flash a new rom your phone will automatically reboot and start up again. The phone will need to be setup again with date/time etc but connections etc should automatically setup itself.
This is similar to a hard reset as everything has been wiped from phone apart from OS and whatever you had stored on SD Card
Once setup go to Settings > System and it should state which rom you have installed

Yes but it starts up again with setting time date and so on.
When finished loading files, it starts over as you says, but then rom starts loading again. its like it hard resets all the time instead of just resetting..

I flash. allign screen - set time date and so on - files load - phone restarts
And then i shall allign screen - set time and date - load files - phone restarts
and on and on and on

Megawhopp said:
I flash. allign screen - set time date and so on - files load - phone restarts
And then i shall allign screen - set time and date - load files - phone restarts
and on and on and on
Click to expand...
Click to collapse
Ah, right. Apologies. Now I understand your problem better.
Had you ever successfully flashed a rom? Or has thius always happened with a cooked rom?

Megawhopp said:
Hi,
I have just tryed to flash both newest laurentius rom and newes kwbr rom
Flashing goes ok, but when all files are loaded, phone just resets and starts all over again.
im on spl-1.56 Olinex
Help needed
Click to expand...
Click to collapse
You can better ask it in L26 ROM topic, but I know that Laurentius ROM (2.3 or 2.4) KEEPS hardresseting automatically due to bugs in his cooked rom. After 2 or 3 times automatic HR it stops....

Yes i have successfully flashed roms, i came from kwbr 2.1
i have tryed with more roms than laurentis´ also with kwbr 2.3 and 2,3,1

Megawhopp said:
Yes i have successfully flashed roms, i came from kwbr 2.1
i have tryed with more roms than laurentis´ also with kwbr 2.3 and 2,3,1
Click to expand...
Click to collapse
Ok, sounds like a hardware problem to me. I've had only automatic Hard Resets with L26's Rom. No problems with Kwbr or Dutty's roms.
Try flashing via USPL and tell us how it goes.

had same problem with l26 rom will never use laurentius rom's again, dutty's and miri's roms are the best

I have tryed with USPL and its the same

Now i cant do anything from my computer. How is it that i flash from sd card?

Credits to JohnQ
"take a look at your SD card. direct folder storage card/sdconfig.txt. delete the inside code. im sure there is a code which means hardreset after flash/hardreset. i dont know what it means but i just delete it. but it still hardreset again. so let it hardreset again. then it will be ok until you hardreset your self. lol."
I did it and it worked as a charm. Have you flashed you device with the memory card inserte into it?

no i didnt flash with memory card in it, and memorycard is not in it now
i just managed to flash danish ship rom, but cant seem to flash stock uspl
i will see if phone starts up wit danish ship rom

It worked.. My phone is now alive with danish ship rom..
I will now try to flash newest from Miri..

Megawhopp said:
no i didnt flash with memory card in it, and memorycard is not in it now
i just managed to flash danish ship rom, but cant seem to flash stock uspl
i will see if phone starts up wit danish ship rom
Click to expand...
Click to collapse
Anyway, take a look into you SD Card through you PC...is there a folder named "sdconfig.txt"?...if so, take a look into this "sdconfig.txt" and, please, tell what is written into it...

nope, is no such file

Cant flash miris. Just stays at 0 %

managed to get phone back to hard spl thanks to crackwhores fantastic guide.
And at the moment im flashing miris newest rom..
Hope it works

Megawhopp said:
nope, is no such file
Click to expand...
Click to collapse
But what matters is that you have your baby back
Greetings.

Nope, its not..
Miris didnt work either, and despite the fact that im on hard spl phone is now with the blurry green screen.
Im beginning to get lost now..
What to do..
Please help